Regarding configuring design console in local machine

Hi all
Please help me in this.
i need to configure IDM design console in my localmachine(windows XP) where IDM sever is installed on Aix Machine which is there in client place.
what i need to do now.
weather i need to copy only design console folder from client server to my desktop and configure or elase?
please help me out in this and give me steps how to configure.
Thanks to all
Prasad
7799345966

If you are on OIM9.x you can just copy/paste the design console directory from aix to windows and then change the xlclient.cmd and the classpath.bat etc to point to the correct local directories of the windows system. Addtionally you will have to modify the xlconfig.xml to point to the client's OIM. As a workaround, you can just use the same version installer in local and walk through the wizard.
If you are on OIM11g then you need to install WLS and IAM and then configure IAM and select just the design console check box and complete the wizard by providing rest of the details.
HTH,
BB

Similar Messages

Facing problem while logging into design console of OIM Machine

Hi All,
I am a trainee of IDM. I am getting an error while login to design console of OIM Machine. It is showing the error as
"Error Keyword: DAE.LOGON_DENIED
Description: Invalid Login.
Remedy: Contact your system administrator.
Action: E
Severity: H
Help URL:
Detail:
javax.security.auth.login.LoginException: java.net.MalformedURLException: no protocol: @jndi_url"
The thing is i can't get the problem(why it is showing the error like that).
The follwoing things i have done while configured the OIM with out LDAP synch.
after all the 6 configuration steps.
1. OIM configured successfully
2. After that in Weblogic /lib directory i have run- java -jar wljarbuilder.jar
3. Then copied the wlfullclient.jar to OIM_server/designconsole/ext directory
4. then i run the command ./xlclient.sh
6. after that i got window to login to designconsole ......but i got the problem at this step(user id and password are correct)
Please help me to solve this problem
Regards,
Trainee.

verify the url in config/xlconfig.xml
open xml and provide proper oim url twice in the xml
<ApplicationURL>http://<OIM_HOST_OR_IP:OIM_PORT/xlWebApp/loginWorkflowRenderer.do</ApplicationURL>
<Discovery>
          <CoreServer>
               <java.naming.provider.url>t3://<OIM_HOST_OR_IP:OIM_PORT/oim</java.naming.provider.url>
               <java.naming.factory.initial>weblogic.jndi.WLInitialContextFactory</java.naming.factory.initial>
          </CoreServer>
</Discovery>

List all printers configured from server and local machine when hosted in server machine and working from Client machine

Hello Team
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
can any one please let me know the process, in this i was able to load printers from server, so need to load printers from local machine.
Thanks in Advance
Bindu

Hi Bindu,
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
From this message, this is a web application in asp.net, and it also related to IIS.
You should post in the dedicated ASP.Net Forum
http://forums.asp.net
For IIS issue, http://forums.iis.net/ IIS forum should post.
Thanks
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Configuring standby database on local machine in NT

Dear friends,
I have oracle 8.1.6 on NT version 4.0. I have two servers one for production and another for standby. but my standby database has crashed and i am in the process of rectifying it..
for temporary basis, i want to have both the production and standby database on same NT machine.. but the NT platform is not allowing the same name on instance/ database..
is there any way out to have the production and standby database on same machine on NT pltaform..
kindly guide me as my database is up for 24 hours..
regards,
viral shah

Viral,
You should be able to create the standby on the same NT server. Take a look at the documentation @ http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76995/standbys.htm#29841

OIM Design Console

Hi all
I am trying to install OIM design console but can't find the binaries from the list in oracle web site.
Can you please let me know where should I bring the binaries from ?
We already installed oim server on linux and as far as I know the design console will be installed on Windows only
Thanks
Edited by: 599647 on Jan 23, 2012 5:48 PM

Hi,
try below:
1. configure design console on Linux machine(OIM Machine) using config.sh
got to -> <IDM_HOME>/bin/config.sh
2. create wlfullclient.jar
use below link for above
http://docs.oracle.com/cd/E14571_01/install.1111/e12002/oidonly011.htm
3. copy it into <IDM_HOME>/designconsole/ext folder
4. take complete backup of designconsole folder at windows machine
5. Change the path in xlclient.cmd ( windows path for designconsole folder)
6. Modify the config\xlconfig.xml if required ( might need to change java path)
Regards,
Nishith Nayan

TROUBLE WITH DESIGN CONSOLE

Hi,
I have newly installed OIM 9101. When i start the server and try opening design console after entering the credentials its through some exceptions and getting closed automatically. i tried checking the logs but there are no errors in that too. I'm able to login admin console and work. My app server is JBOSS 4.2.3 GA
2009-06-27 10:20:00,109 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: fwfuscod-5a
2009-06-27 10:20:00,109 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2009-06-27 10:20:00,109 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2009-06-27 10:20:00,875 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-06-27 10:20:00,875 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-06-27 10:20:00,875 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1246078200875, maxLifeAfterPassivation=1200000
2009-06-27 10:20:00,875 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-06-27 10:20:01,234 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-06-27 10:20:01,234 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=1
2009-06-27 10:20:01,234 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1246078201234, maxLifeAfterPassivation=1200000
2009-06-27 10:20:01,234 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-06-27 10:20:08,984 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-06-27 10:20:08,984 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-06-27 10:20:08,984 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1246078208984, maxLifeAfterPassivation=1200000
2009-06-27 10:20:08,984 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-06-27 10:20:14,406 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-06-27 10:20:14,406 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-06-27 10:20:14,406 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1246078214406, maxLifeAfterPassivation=1200000
2009-06-27 10:20:14,406 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done

Hi I'm getting the following error while starting design console on server machine.
ERROR,29 Jun 2009 09:53:22,109,[XELLERATE.DATABASE],Class/Method: tcDataBaseClie
nt/bindToInstance encounter some problems: Cannot instantiate class: org.jnp.int
erfaces.NamingContextFactory
javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interf
aces.NamingContextFactory [Root exception is java.lang.ClassNotFoundException: o
rg/jnp/interfaces/NamingContextFactory]
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at com.thortech.xl.ejb.interfaces.tcDataBaseUtil.lookupHome(Unknown Sour
ce)
at com.thortech.xl.ejb.interfaces.tcDataBaseUtil.getHome(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBaseClient$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.dataaccess.tcDataBaseClient.bindToInstance(Unknown So
urce)
at com.thortech.xl.client.dataobj.tcDataBaseClient.recoverConnection(Unk
nown Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.getInterface(Unknown
Source)
at com.thortech.xl.dataaccess.tcDataBaseClient.close(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.close(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.finalize(Unknown Source)
at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
at java.lang.ref.Finalizer.runFinalizer(Unknown Source)
at java.lang.ref.Finalizer.access$100(Unknown Source)
at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org/jnp/interfaces/NamingContextFac
tory
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.sun.naming.internal.VersionHelper12.loadClass(Unknown Source)
... 18 more
ERROR,29 Jun 2009 09:53:22,109,[XELLERATE.JAVACLIENT],Class/Method: tcDataBaseCl
ient/getInterface encounter some problems: RuntimeException encountered. Reconn
ecting!
java.lang.NullPointerException
at org.jboss.invocation.MarshalledValueInputStream.resolveClass(Marshall
edValueInputStream.java:101)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at org.jboss.invocation.MarshalledValue.get(MarshalledValue.java:91)
at org.jboss.invocation.unified.interfaces.UnifiedInvokerProxy.invoke(Un
ifiedInvokerProxy.java:196)
at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerIntercep
tor.java:365)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.jav
a:197)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.
java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:7
0)
at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSession
Interceptor.java:121)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy1.isOpen(Unknown Source)
at sun.reflect.GeneratedMethodAccessor8.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy1.isOpen(Unknown Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.getInterface(Unknown
Source)
at com.thortech.xl.dataaccess.tcDataBaseClient.close(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.close(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.finalize(Unknown Source)
at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
at java.lang.ref.Finalizer.runFinalizer(Unknown Source)
at java.lang.ref.Finalizer.access$100(Unknown Source)
at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
While trying to open design console on local machine its saying
Error Keyword: DAE.CLIENT_NOT_BOUND
Description: Database client has not bound to the server-side database object. Either the client database object has never bound to the server-side database object, or the server-side database object is no longer accessible.
Remedy: Attempt to login again. If this fails, contact your system adminstrator.
Action: E
Severity: H
Help URL:
Detail:
I used jdk1.6.0_12 for design console installation on local machine.

Problem with Design Console configuration - please help

Dear All,
I am trying to configure design console. It is installed on Windows XP and should point to remote server. I am getting the following error on OIM Server and Port screen:
INST-07057: Error in validating the Hostname field value. Entered host is not up and running
Make sure that the host is up and running
But host is up and running. I can ping it successfully and oim admin interface is working. I suspect this is permission issue.
If you can help me to resolve this I would appreciate it very much.
Kind regards
Maria

It seems xlclient.cmd got modified. Check if your xlclient.cmd looks like this:
@echo off
setlocal
call classpath
REM SET DEBUG_OPTS=-classic -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5001 -DXL.RedirectSysOutErrToFile=TRUE -DXL.SysOutErrLogFile=.\logs\Client.System.Out.Err.log
REM Make sure to remove java.naming.provider.url and read it from the configuration
REM once the JNDI Profiles are implemented.
REM make sure you are using j2sdk1.4.2_05
"<your java home>" %DEBUG_OPTS% ^
     -DXL.ExtendedErrorOptions=TRUE -DXL.HomeDir=C:\Oracle\Middleware\Oracle_IDM1\designconsole ^
     -Djava.security.policy=config\xl.policy ^
     -Dlog4j.configuration=config\log.properties ^
     -Djava.security.manager -Djava.security.auth.login.config=config\authwl.conf ^
     com.thortech.xl.client.base.tcAppWindow -server server
endlocal

Clarifications on OIM Design Console 11.1.1.5 Installation

I have the OIM Server 11.1.1.5 installed and configured on OL (Oracle Linux) 5.7 64bit. The Next step is to install and confiure the OIM Design Console.
I have read the 11.1.1.5 doc. The OIM Console runs on Windows only. But I have noticed that some posts claimed the 11g console can run on the both of Windows and Linux.
OIM Design Console
Is that true? If yes, please point the doc for the installation and configuration on the Linux.
If not, what are the minimum requirements to run OIM Console 11.1.1.5 on the Windows?
I looked over the 11.1.1.5 doc http://docs.oracle.com/cd/E21764_01/install.1111/e12002/oidonly.htm#CDDIDCIC
I have:
WLS not a mandatory;
SOA not a mandatoty;
IAM 11.1.1.5 a mandatory;
The 11.1.1.5 doc states that OIM manager has to be configured prior to configuring of OIM Console. I read this as the RCU schemas relevant. Do I have to install a new RCU schema DB in the local Windows just for the OIM Console configuration? Or I can use the SAME RCU Schema DB for the OIM Server on the OL.
Thanks a lot for the help.

If you have already installed OIM 11.1.1.5 on linux machine just do below to configure design console
1. goto IDM_HOME/bin/ run config.sh
2. In the configuration wizard, select ‘Design Console’ checkbox ONLY.
3. next screen, enter the OIM server host and port name
4 generate wlfullclient.jar and Copy the ‘$WL_HOME/server/lib/wlfullclient.jar’ to ‘IDM_HOME/designconsole/ext’ (find below instruction given for generation of wlfullclient.jar)
5. now goto IDM_HOME/designconsole-> run xlclient.sh and you will have design console in unix
If you want your design console in windows do below
1.copy entire folder "designconsole" from linux to Windows machine
2. Now, in your local windows machine, edit the file ‘$DC_HOME/designconsole/xlclient.cmd’ ($DC_HOME is the folder where you copied the ‘designconsole’ folder) to change the following values:
* "@loc\java\bin\java" - '@loc' points to your JDK installation
* "-DXL.HomeDir=@loc" - '@loc' will be $DC_HOME/designconsole
* "config\@auth_config" - '@auth_config' will be authwl.conf
creation of wlfullclient.jar
- Change directories to the server/lib directory.
cd WL_HOME/server/lib
- Use the following command to create wlfullclient.jar in the server/lib directory:
java -jar wljarbuilder.jar
--nayan

Steps to setup and configure Node Manager on local and remote machine

Hello,
I am using WLS 10.3 on Windows.
I have two machines, One cluster and two managed servers (one on each machine) created under a domain. I have used configuration wizard to create the domain.
I have gone through documents on Node Manager and found what to configure. But I have not found when to configure. In other words I want to know what is the sequence of steps if I have to set Node Manager on my local machine (in which domain exists) and on remote machine.
Please let me know the sequence of steps I need to follow to set and configure the Node Manager on local and remote machine. I want to use Java Node Manager (not the Script node manager).
Thanks,
Sanjay

Hello,
Ok, let me tell you what I have done till now.
1) Installed WebLogic 10.3 on machine A (local machine, on which I have created domain and my Admin Server is running. Also Managed Server 1 is created on this machine).
2) Installed WebLogic 10.3 on machine B (remote machine, on which Managed Server 2 will be created).
3) On machine A I used the configuration wizard and create a domain. While creating the domain I did the following:
i) Created two managed servers.
ii) Created a cluster
iii) Assigned Servers to cluster.
iv) Created two machines.
v) Assigned servers to machines (Admin Server and MS_1 to machine A and MS_2 to machine B).
4) Sarted Admin Server.
5) On the Admin Console I made some configurations for the Node Manager on Machines -> Machine A -> Node Manager. Assigned the values:
i) Type (SSL)
ii) Listen Address (IP_Address of machine A)
iii) Listen Port (5556)
6) Similarly did for Machine B.
So till now phsically the managed server (MS_2) directory and configuration is not there on Machine B (its only configured on machine A because I created the domain on Machine A).
Now I want install/configure/setup NM on both the machines. Start my both the managed servers using Admin Console (which will use the node managers).
What are the sequence of steps I need to follow my task?
Any help and suggestions are welcome with warm regards.
Thanks,
Sanjay

Local Machine not present in local configuration store

Having trouble getting Lync 2013 installed on a Windows Server 2012R2 OS.
Pool consists of Lync Server and SharePoint Server. Using Enterprise version so Databases are on separate SQL 2012 server. All machines domained. Logged in as myself who has domain admin creds.
Topology published without issue - all machines entered as FQDN using "servername.domain.net". Databases created in and showing in SQL MGMT Studio.
Moving on to Deployment Wizard and running through the steps:
Step 1 of Lync 2013 Deployment Wizard - Install Local Configuration Store
> Install Local Configuration Store
Import-CSConfiguration -FileName "C:\Users\MYNAME\AppData\Local\Temp\CSConfigData-2015_02_12-14_39_58.zip" -Verbose -LocalStore
> Enable local replica service
Enable-CSReplica -Verbose -Confirm:$false -Report "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html"
Creating new log file "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-d761588e-475f-4b27-9345-d9ff17390a52.xml".
Enable replica service for the Lync Server computer.
Creating new log file "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html".
Enable-CSReplica" processing has completed successfully.
Detailed results can be found at "C:\Users\MYNAME\AppData\Local\Temp\Enable-CSReplica-[2015_02_12][14_39_53].html".
> Replicate-CsCmsCertificates
Logging status to: C:\Users\MYNAME\AppData\Local\Temp\ReplicateCMSCertificates-[2015_02_12][14_39_53].html
Task Status Completed.
Step 2 of Deployment Wizard - Setup or Remove Lync Server Components
> Bootstrap-CsComputer
Logging status to: C:\Users\MYNAME\AppData\Local\Temp\BootstrapFull-[2015_02_12][14_47_42].html
Checking prerequisites for bootstrapper...
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Host name: LyncServer.domain.net
WARNING! Host not found in topology. All roles will be uninstalled.
Disabling unused roles...
Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\MYNAME\AppData\Local\Temp\Disable-CSComputer-[2015_02_12][14_47_49].html"
Checking prerequisites for roles...
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Checking prerequisite PowerShell...prerequisite satisfied.
Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
Checking prerequisite VCredist...prerequisite satisfied.
Checking prerequisite SqlNativeClient...prerequisite satisfied.
Checking prerequisite SqlClrTypes...prerequisite satisfied.
Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
Checking prerequisite UcmaRedist...prerequisite satisfied.
No databases discovered, skipping Install-CsDatabase...
No roles discovered, skipping Enable-CsComputer...
am now stuck as the Step 3 shows "Local Machine not present in local configuration store"

Hi Dee McClanahan,
I suggest you should check whether or not the names are spelled correctly in the topology builder.
If this is not the case, I suggest you can create and publish a new topology.
To remove the published entry run:
remove-CsConfigurationStoreLocation
In addition, I’m a little confused about what you say “Pool consists of Lync Server and SharePoint Server.”
Do you mean that you installed Lync Server and SharePoint Server on the same box ?
Best regards,
Eric

Configuring OIM Server and Design Console

Hi Guys,
I trying to configuring OIM Server and Design Console via the OUI Configuration Wizard am getting the following error being reported. Can anyone advise.
Oracle [ID 1234357.1]
Unable to contact MBeanServer for oracle.as.soainfra.config:
Location=soa_server1,WorkflowIdentityConfig.ConfigurationType=jazn.com,WorkflowIdentityConfig=human-workflow,type=WorkflowIdentityConfig.ConfigurationType.ProviderType.PropertyType,Application=soa-infra,name=jpsContextName,WorkflowIdentityConfig.ConfigurationType.ProviderType=JpsProvider
Step Configure OIM Server failed
The steps taken are as followed:
a. Install Database -- Completed
b. Run RCU and create Schema for PS1 - Completed no reported error's
c. Install Weblogic Server 10.3.6 - Completed
d. Install SOA Server 11.1.1.7.0 and Install SOA patches:
    p16471502_111170_Generic_1of2.zip
    p16471502_111170_Generic_2of2.zip
e. Install IDM Server 11.1.1.7.0 - Completed
f. Create Domains - Completed
g. Configure Security Store Python Script _ unable to run as does not exist.
h. Start both Admin server and SOA server - Started ok no reported errors.
Any help would be of help.
Regards,
K

Hi Kevin,
Thanks for getting back to me please see status from opatch.
Output from opatch (IDM):
C:\Windows\system32>set PATH=c:\Java\jrockit-jdk1.6.0_45-R28.2.7-4.1.0\bin;%PATH%
C:\Windows\system32>set ORACLE_HOME=c:\app\oracle\Middleware\product\fmw\Oracle_IDM1
C:\Windows\system32>set PATH=c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\OPatch
C:\Windows\system32>opatch lsinventory
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.1.0.9.9
OUI version       : 11.1.0.9.0
Log file location : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\cfgtoollogs\opatch\opatch2013-07-18_14-29-36PM_1.log
OPatch detects the Middleware Home as "C:\app\oracle\Middleware\product\fmw"
Lsinventory Output file location : c:\app\oracle\Middleware\product\fmw\Oracle_IDM1\cfgtoollogs\opatch\lsinv\lsinventory2013-07-18
_14-29-36PM.txt
Installed Top-level Products (1):
Oracle IDM Suite                                                     11.1.1.7.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
C:\Windows\system32>
Output from opatch (SOA):
C:\Windows\system32>set PATH=c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\OPatch
C:\Windows\system32>set ORACLE_HOME=c:\app\oracle\Middleware\product\fmw\Oracle_SOA1
C:\Windows\system32>opatch lsinventory
CLASSPATH=;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\app\oracle\MIDDLE~
1\product\fmw\ORACLE~1\soa\modules\commons-cli-1.1.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fab
ric_11.1.1\fabric-runtime.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tool
s.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;c:\app\oracle\Middl
eware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;c:\app\oracle\Middleware\product\fmw\Oracle_
SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.bpm.admin.lifecycle.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.classloader_11.1.1.jar;C:\app\oracle\MIDD
LE~1\product\fmw\ORACLE~1\modules\org.apache.commons.logging_1.0.4.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\org.apa
che.commons.beanutils_1.6.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.ucp_11.1.0.jar;c:\app\oracle\Middleware\p
roduct\fmw\Oracle_SOA1\soa\modules\oracle.rules_11.1.1\rulesdk2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.rules_11.1.1\rl.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.adf.model_11.1.1\adfm.jar;C:\app\oracle\MIDDL
E~1\product\fmw\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.xdk_1
1.1.0\xmlparserv2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\communications\modules\usermessaging-command_11.1.1.jar
CLASSPATH=;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\app\oracle\MIDDLE~
1\product\fmw\ORACLE~1\soa\modules\commons-cli-1.1.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fab
ric_11.1.1\fabric-runtime.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tool
s.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;c:\app\oracle\Middl
eware\product\fmw\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;c:\app\oracle\Middleware\product\fmw\Oracle_
SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.bpm.admin.lifecycle.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.classloader_11.1.1.jar;C:\app\oracle\MIDD
LE~1\product\fmw\ORACLE~1\modules\org.apache.commons.logging_1.0.4.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\org.apa
che.commons.beanutils_1.6.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.ucp_11.1.0.jar;c:\app\oracle\Middleware\p
roduct\fmw\Oracle_SOA1\soa\modules\oracle.rules_11.1.1\rulesdk2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\soa\modules\o
racle.rules_11.1.1\rl.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.adf.model_11.1.1\adfm.jar;C:\app\oracle\MIDDL
E~1\product\fmw\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\app\oracle\MIDDLE~1\product\fmw\ORACLE~1\modules\oracle.xdk_1
1.1.0\xmlparserv2.jar;c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\communications\modules\usermessaging-command_11.1.1.jar
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.1.0.9.9
OUI version       : 11.1.0.9.0
Log file location : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\cfgtoollogs\opatch\opatch2013-07-18_14-33-45PM_1.log
OPatch detects the Middleware Home as "C:\app\oracle\Middleware\product\fmw"
Lsinventory Output file location : c:\app\oracle\Middleware\product\fmw\Oracle_SOA1\cfgtoollogs\opatch\lsinv\lsinventory2013-07-18
_14-33-45PM.txt
Installed Top-level Products (1):
Oracle SOA Suite 11g                                                 11.1.1.7.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
C:\Windows\system32>
Regards,
K

OIM11gr2 configure the Design console on Websphere

Hi All,
I installed OIM11gr2 with websphere 7 . now i am trying to configure the Design console ,for that i required IBM App Client as per the doc
http://docs.oracle.com/cd/E37115_01/user.1112/e28523/manage_was_oim.htm#autoId4 , can anybody please let me know the link to download latest IBM App Client.
Thank You

Where exactly are you failing ?
As far as I remember correctly the Design Console installation installation on Linux environments requires a file similar to that of install_server.sh which doesn't comes with the installation media. So in most of the scenarios, the design console is kept on local windows environment. If that doesn't suits you then here is a solution which we did for moving forward.
- Create a file named install_client.sh by copying the contents of the file from install_server.sh.
- Open this file and go the the last part, where the jar invocation logic is specified and make the change as following:
Existing - fi
$JAVA_HOME/bin/java -cp "*setup_server.jar*:xlhome/install/xlCustom . . . . .
*Modify To* - fi
$JAVA_HOME/bin/java -cp "*setup_client.jar*:xlhome/install/xlCustom . . . . .
Now invoke this sh file to begin installation. Let me know if you hit some issues.
Thanks
Sunny

How to configure ipsec policy on windows server 2008 r2 to permit local machine only access to gateway,one other server and it's local ip?

I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.

Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

Configure Local Machine is grayed out in Server Monitor

I'm trying to configure one of our Intel Xserves for use with Lithium for monitoring via the LOM port. When I go to Server Monitor the Configure Local Machine menu item is grayed out.
All the units have the same hardware config and are working so I'm not sure what is going on.
Where should I begin do you think?
Thanks.

I hadn't thought of that so it's not a dumb question. The version of the OS is 10.5.8 and Server Monitor is 1.7, which is the same as the other servers.

Can't login to OIM 11g Design Console after integrate with OAM 11g

Dear All,
After successfully integrate oim 11g with oam 11g, we cannot access the design console of oim 11g anymore (access denied).
Is it cause of oam protection?
Or do we have to do additional configuration?
Please help...
Thank you,
-heri-

962874 wrote:
Hi All,
I have installed and configured OAM,OIM,SOA under weblogic domain. After configured OAM on weblogic domain(by extending it)
I am getting the following error while login to oim console,design console .
<Jan 17, 2013 4:26:09 AM EST> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 172.16.30.107:57,579 during the configured idle timeout of 5 secs>
<Jan 17, 2013 4:26:10 AM EST> <Error> <Default> <BEA-000000> <Failed to communicate with any of configured Access Server, ensure that it is up and running.> Is the port 57,579 correct? Port numbers cannot have comma in them. Also try to telnet to that host and port from your machine to check if there is no network issue.
Regards,
Nani-Bikash
Edited by: 932574 on Jan 17, 2013 10:40 AM

Regarding configuring design console in local machine

Similar Messages

Maybe you are looking for