Batch Material level and Material Master

Hello,
We have defined the batch level on level "Material" because we want the batchnumber to be unique for a material - independent of the plant it is used in.
I would like to know if with this setting of the config, the material X marked with the flag "Batch Managed" in its master record, should be managed with batches in all Plants or is it posbilbe to exclude some plants (for instance plants belonging to other country) from managing the material X in batches?
Thanks for any reply,
Aart.

you can only exclude plants from managing batches for a common material if your batch level is plant level.
with material level, all plants have to manage a common material with batches.

Similar Messages

Client level, plant level and material level batch

Hi,
Can any body tell me wat is the actual meaning of
!) Client level batch,
2) plant level batch,
3) material level batch
with exa. please.
Thanks
Nilesh Ithape

Hi,
Below is the extract from the IMG Documentstion..
====================================================================
Batch numbers can be unique at the following levels:
at plant level
at material level
at client level for a material
If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to batch numbers within Inventory Management using a transfer posting 'material to material'.
If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
=========================================================
Hope this helps..
Regards,
Siva

Changing Batch Management Level from Material to Plant

Hi all,
We are investigating changing our batch management level from material to plant to meet business requirements.
SAP has pointed us to a note with a program to reset the batch level, as well as highlighting some things to look out for.
I've conducted the change in a playpen system and so far it looks relatively straightforward, with complexities arising only when characteristics exist, or when a batch exists in multiple plants.
Seems that batch master data is moved from MCH1 to MCHA, including the object link number to classification. Unfortunately it seems a limitation of the conversion is that the batch master data is copied to ONE plant only in MCHA, no doubt due to the fact the object number link to classification must be unique.
My question is this: has anyone performed this change before, and if so can you offer me any advice on what to look out for, or potential problems that arose after the change?
Any help or comments are appreciated.
Mark.

hi..
first of all try this simple one...
You will have to delete all the materials, remove stock and then switch the batch management flag.
Or
To convert the batch from plant level to material there is Conversion Program defind by the SAP...
1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.
2. Create the report ZCHTCUCH, which is specified in the attachment.
3. Run this report in the clients for which you want to reset batch level to plant level.
4. Call transaction OMCT.
5. Check whether the batch level for "Batch unique at plant level" is set.
6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).
7. Execute the function "Batch Level -> Conversion".
8. Define a plant for a plant view that may be missing.
9. Always execute the report in the test mode first. Analyze the error log.
10. If no errors occur, you can execute the report in production mode.
11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.
try this out..hope is works,,
Thanks..

Very Urgent Extn.Material Group and Material Group.

Hi Guru's,
      I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
     I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
    Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.

Hi Manju & Gopi,
    This Order Confirmations cube having data from 2 data sources.
    There is a performence issue to clubbing so many tables.
     Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
   0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna.

Filtering R/3 Material Groups and Material Types

Hi,
I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
I am tried doing the following:
1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
Thanks

Hi,
Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
There select the Object name as MATERIAL and click on the "filter settings" tab.
There in OBJECT FILTER SETTINGS
Enter the relevant filter criteria:
e.g. If you wnat to filter on Material type(MARA-MTART):
The input will be as follows:
Table /Structure :MARA
Field :MTART
OP :EQ Equality (= Low)
Low: "Material type name"
Incl/EXcl: Inclusive defined
And then click on the button "FILTER SYNC".
The filter settings are complete for the Material download.
HTH,
BR,
Disha.
Pls reward points for helpful answers.

A report for MM where basic list will contain the material no and material

how to develop a report for MM where basic list will contain the material no and material description for the range of material no chosen by user. ...plz help me...how to do this step by step..

Hi Raja,
Firstly declare a select-option for material number.
write a select query specifying the required field and specify a where clause
as
WHERE MATNR IN S_MATNR.
Obviously you will select the records into internal table and so loop that internal table and display the records...
The records will be displayed on the basic list.
Hope this will solve your problem.
Regards,
Narin Nandivada

Description of material group and material type

hi,
i want to know which are the tables for the description of material group and material type.
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PM

table name :MARA
Field name:
Material group:MATKL
for Material description
Table name :MAKT
fieldname:MAKTX
Rewards plz..........

Relation between Material Number and Material document Number.

hi xperts,
I want to Know Is there any Relation ship between the <b>Material Number</b> and <b>Material Document Number</b>.
If So can i get any Tcodes to check them?
Thanks in advance.
Message was edited by:
STALIN JOSEPH

Hi,
Thanks for your reply.
I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
and Material Document.
In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
Please help me to collerate between them.

FM to get Material Charecterstis and Material Charecterstiscs of Material

Hi Experts.
do we have any funtion module for getting the Material Charecterstis and Material Charecterstiscs values for a metrial..
Ex: Input = Material : JDMPPLUS
      output = class:                      WTY_MAINT_PLAN
                   Charecterstic value : JDCSP
Thanks

Hi,
     Try this FM CLAF_CLASSIFICATION_OF_OBJECTS
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
*     CLASS                      = ' '
*     CLASSTEXT                  = 'X'
        classtype                  = w_klart    " Material class
*     CLINT                      = 0
*     FEATURES                   = 'X'
*     LANGUAGE                   = SY-LANGU
        object                     = w_matnr    "Material
*     OBJECTTABLE                = ' '
*     KEY_DATE                   = SY-DATUM
*     INITIAL_CHARACT            = 'X'
*     NO_VALUE_DESCRIPT          =
*     CHANGE_SERVICE_CLF         = 'X'
*     INHERITED_CHAR             = ' '
*     CHANGE_NUMBER              = ' '
      TABLES
        t_class                    = wa_sclass
        t_objectdata               = wa_clobjdat
*     I_SEL_CHARACTERISTIC       =
*     T_NO_AUTH_CHARACT          =
EXCEPTIONS
   no_classification          = 1
   no_classtypes              = 2
   invalid_class_type         = 3
   OTHERS                     = 4
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Regards
Bala Krishna

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Authorization for material type and material views

Hello all,
I would need to restrict a user group, in creation (MM01) and modification of material master, based of type material and material views.
The authorization, for each user should be:
- view, modify and create of all views, except accounting (B) for type material ZFER;
- view, modify and create of all views for type material ZOFF.
I tried to create 2 roles in PFCG with the following authorization objects:
1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B)
2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
but the effect is to be authorized, to all view for material type ZFER and ZOFF.
I have already updated the authorization group of the type materials (OMS2).
Is there a solution for this problem?
(component version SAP ECC 6.0)
Thanks.
Regards,
Luca

I tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
- Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
- One role should be
M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
- Second role should be
M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
Regards,
Subbu

Restriction on division, material group and material.

Hi friends,
current model,
infocube details as below,
0division, 0matl_group, 0material, currency, Base_unit, amount, quantity
Bex PLAN Query as below,
variables on 0division, 0matl_group
rows - 0material
columns - amount and keyfigure
now when the user selects a perticular division from the variable then he should be able to select only those material groups which are allowed under that selected division and similarly material, only those materials allowed selected division and selected matl_group.
I am talking about selecting from the variable (F4).
currently all material groups and all materials are allowed to select after selecting a division..
thanks in advance.

thanks, i solved it

MATERIALIZED VIEW and MATERIALIZED VIEW LOG

Hello,
I have the following table
create table My_price
(price_id number(10),
product_id number(10),
price_date date,
price_value number(10,2));
I want to create the following materialized view
create materialized view Last_Price_Date
refresh
on commit complete
as
select max(price_date) as max_date, product_id from my_price group by product_id;
Do I have to create materialized view log ? Will my materialized view be refresh on commit without materialized view log ?

As a student the requisite first task is always to study. Thus your assignment is to go to http://tahiti.oracle.com and read the concept and architecture docs on Materialized Views so that you can learn about the different types of MVs and how and when they are refreshed. There you will learn about what ON COMMIT means.
Then please turn your "I want to create" into an "I created it." Then, having read the docs, you will be able to observe how your MV behaves.
PS: Your SELECT statement is not syntactically correct. Start by fixing it so that it works in SQL*Plus.

Regarding list with material no and material class per product

Hi All,
Could you please tell me ,Is it possible to create a list with material no. and which material class is linked to each product?
E.g. 7510555 (plant DK10 - sales org. DK01) Class type Z01 - ESTORE and SATTSTORE + class type 001 - CHEMICAL PRODUCT and DK_FD_SALG.
Can you inform me in which table I can find the information.
thanks in advanse!
With regards,
Pritee.

Try transaction CL30N, CL31, CT10, CT12.
Best Regards, Dirk

Creation of Materialized view and Materialized view log.

I wanted to create materialized view with 'REFRESH FAST ON COMMIT' option.
1) Table1 --it is partitioned range + list -- Added primary key
2) view1   -- having primary keys on view's base table
Steps:
1) create materialized view log on Table1 ; -- default primary key
2) create materialized view log on view1. --- It is giving below error.
ORA-00942: table or view does not exist
i wanted to create Materialized view like below
create materialized view
REFRESH fast ON commit
as
select ...
... from table1
where c1 in (select c1 from view1 where ... );
Question:
1) As i am getting above error while creating MV log on view. Can we create MV log on view or we have to create MV log on view base table?
2) To create MV with ''REFRESH FAST ON COMMIT' option , do we need to have primary key on master tables?
Any pointers on this will really helpful.
Thanks
Prasad

Also created MV LOG on 3 tables and tried with joins ..
create materialized view
REFRESH fast ON commit
as
select ...
... from table1 , tab2 t2,tab3 t3
where ....
and ...
Get same error ORA-12052: cannot fast refresh materialized view AVSYS.EVENT_LOG_MV
2052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause:    Either ROWIDs of certain tables were missing in the definition or
           the inner table of an outer join did not have UNIQUE constraints on
           join columns.
*Action:   Specify the FORCE or COMPLETE option. If this error is got
           during creation, the materialized view definition may have be
           changed. Refer to the documentation on materialized views.

Batch Material level and Material Master

Similar Messages

Maybe you are looking for