Regarding file path

Hi all,
I have downloaded the internal table to application server.
but in AL11 transaction I am not able to see that directory. Is there any way to access the application server path where I downloaded the file.

Hello,
Either you can ask basis team to do SAP mapping of the directory where you have loaded file in application server.
or you can get the physical file apth & try to connect the server using FTP explorer tool.you need to ahve user id & pwd for the server.ONce you access server just click on the directory where you ahve loaded file .Find file & see the contents.
Thanks.
Mark points if helpful.

Similar Messages

  • Regarding Application server file path

    Hi All,
    please explain the process how to create logical file path in FILE t-code.

    Hi,
    logical file path
    The (platform-independent) logical file path is evaluated at runtime to get the (platform-dependent) physical path (see Assignment of Physical Paths to Logical Path).
    Two examples of this are:
    · Logical file path: BW_OLAP_CACHE
    Name: BW OLAP Cache
    · Logical file path: BW_OLAP_CACHE_SPAN
    Name: BW OLAP cache cross-application server
    Assignment of Physical Paths to Logical Path
    At runtime, the physical path assigned for the corresponding operating system platform is generated from the logical file path.
    Since the physical path is platform-dependent, the customer must set it her/himself. The closer the file is to the application server or, with the cross-application server cache mode, to the application server, the faster it can be found and read.
    Log(ical) path: BW_OLAP_CACHE
    Name: BW OLAP Cache
    Syntax group: UNIX (all Unix platforms)
    Phys(ical) path: /usr/ (Syntax group WINDOWS NT)
    In a heterogeneous system landscape (such as UNIX and Windows NT servers) all system-specific syntax groups must be maintained. Ensure that the definitions for the various syntax groups point to the same directory.
    5. Save your entries
    for detailed information
    Have a look at this links... i guess it explains what you are looking for...
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_sm40/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
    Regards,
    Raj.

  • Regarding Application server file path browsing

    Hi All,
    I have a issue regarding Application Server File Path browsing.
    Actually in my selection-screen i will declare a parameter as <b>Application Server File Path</b> now when i press F4 in that field it should be able to browse through <b>Application Server Path's</b>.
    Just like <b>F4_FILENAME</b> in the case of <b>Presentation Server File Path</b> Browsing.
    Can anybody solve my issue.
    Thanks in advance.
    Thanks & Regards,
    Rayeez.

    Hi Shaik,
    Just copy and paste:
    Here is the code for retrieving list of files contained within specific Application server directory(SAP).
    PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
    data: begin of it_filedir occurs 10.
    include structure salfldir.
    data: end of it_filedir.
    START-OF-SELECTION.
    Get Current Directory Listing for OUT Dir
    call function 'RZL_READ_DIR_LOCAL'
    exporting
    name = p_fdir
    tables
    file_tbl = it_filedir.
    List of files are contained within table it_filedir
    loop at it_filedir.
    write: / it_filedir-NAME.
    endloop.
    Hope this will help you.
    Let me know incase of any concerns.
    EDIT:
    There are few FM for ur refernce :
    RZL_READ_DIR_LOCAL
    SUBST_GET_FILE_LIST Return table with file list for the given directory (pattern allowed)
    F4_DXFILENAME_TOPRECURSION Popup to select one file from the given application server directory
    TH_SERVER_LIST Returns list of application servers.
    EPS_GET_DIRECTORY_LISTING – Lists filenames from the application server .
    Cheers
    Sunny
    Rewrd points, if found helpful
    Message was edited by: Sunny

  • Regarding registry path of plx files

    Hi All
    I have created a new library and referred it in one of the forms. But attaching library to the form requires the plx file path of the library to be mentioned in Form/Libr attachment section in Edit generator preference of the particular form.
    Is there some some registry path which we can modify to put the path where all the plx files are kept. This will not require the attachment of library to the form explicitly.
    Any help in this regard is appreciated.
    Cheers Sudhir

    Did you include the path of the plx files in your Forms path?
    And after you deploy your Forms to the Oracle Application server also include the path of the plx files to the Forms path in the environment file.
    Regards,
    Mark

  • Regarding logical file path specification

    How logical file path can be specified and when and why it can be used?

    Hi Naveen,
    Logical File Path can be created using transaction FILE and it is used when you have the requirement to upload your data to the application server.

  • What is a  Logical and Physical file path in sap?

    what is a  Logical and Physical file path in sap?

    Hi,
    Physical file is what you see from the OS level.
    Logical file is what ABAP code can call certain functions to read/write.
    Transaction FILE would link them together. Typically the logical path ends with "<FILENAME>", and the logical file refers to the logical path.
    To extract the physical path from the logical path name
    DATA: lf_mandt TYPE sy-mandt,
            lf_opsys TYPE sy-opsys.
      lf_mandt = sy-mandt.
      lf_opsys = sy-opsys.
    To extract the physical path from the logical path name
      CALL FUNCTION 'FILE_GET_NAME'
        EXPORTING
          client           = lf_mandt
          logical_filename = p_unix
          operating_system = lf_opsys
        IMPORTING
          file_name        = gwa_input
        EXCEPTIONS
          file_not_found   = 1
          OTHERS           = 2.
      IF sy-subrc EQ 0.
      Concatenating the physical path and the input unix file name
        CONCATENATE gwa_input p_file INTO gf_file .
      ENDIF.
    Reward if helpful.
    Regards,
    Ramya

  • Application server file path vaidation

    I have written the code for application server file path validation.
      DATA : l_fname TYPE filename-fileintern." type c.
      DATA : l_filpath TYPE filename-fileintern,
             l_filname(40) TYPE c.
    PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
    AT SELECTION-SCREEN ON p_sucfil.
    l_fname = p_sucfil.
    CALL FUNCTION 'FILE_GET_NAME'
      EXPORTING
      CLIENT                        = SY-MANDT
        logical_filename              = l_fname
       OPERATING_SYSTEM              = SY-OPSYS
      PARAMETER_1                   = ' '
      PARAMETER_2                   = ' '
      PARAMETER_3                   = ' '
      USE_PRESENTATION_SERVER       = ' '
       WITH_FILE_EXTENSION           = 'X'
      USE_BUFFER                    = ' '
      ELEMINATE_BLANKS              = 'X'
    IMPORTING
      EMERGENCY_FLAG                =
      FILE_FORMAT                   =
       FILE_NAME                     = l_filpath
    EXCEPTIONS
       FILE_NOT_FOUND                = 1
       OTHERS                        = 2
    IF sy-subrc <> 0.
      message 'Invalid file name' type 'E'.
    ENDIF.
    But always i will get Invalid file name.
    Y is it so.
    pls help me.

    Praveen,
    I have checked ur code and I found that if i give a logical file name from
    tran. FILE under folder 'Logical file name definition, cross client' then ur code works. Pl. check.
    Regards,
    Joy.
    DATA : l_fname TYPE filename-fileintern." type c.
    DATA : l_filpath TYPE filename-fileintern,
    l_filname(40) TYPE c.
    PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
    AT SELECTION-SCREEN ON p_sucfil.
      l_fname = p_sucfil.
      CALL FUNCTION 'FILE_GET_NAME'
      EXPORTING
      logical_filename = l_fname
    operating_system = sy-opsys
      with_file_extension = 'X'
      IMPORTING
      file_name = l_filpath
      EXCEPTIONS
      file_not_found = 1
      OTHERS = 2
      IF sy-subrc <> 0.
        MESSAGE 'Invalid file name' TYPE 'E'.
      ENDIF.

  • 'F4_FILENAME'. USER FILE PATH

    when I used the following function module  for user defined file path selection
    parameters: p_file like rlgrap-filename.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    PROGRAM_NAME = SYST-CPROG
    DYNPRO_NUMBER = SYST-DYNNR
    FIELD_NAME = ' '
    IMPORTING
    FILE_NAME = P_FILE.
    I am getting the follwing Dump error.
    Exception condition "NO_FIELDCATALOG_AVAILABLE" raised.
    Could any one help me correcting problem ?

    Try  this.
    report zrich_0001.
    data: ifiletable type filetable.
    data: xfiletable like line of ifiletable.
    data: rc type i.
    parameters: p_file1 type localfile default'C:test.txt'.
    at selection-screen on value-request for p_file1.
    call method cl_gui_frontend_services=>file_open_dialog
       EXPORTING
    *    WINDOW_TITLE            =
    *    DEFAULT_EXTENSION       =
    *    DEFAULT_FILENAME        =
    *    FILE_FILTER             =
         INITIAL_DIRECTORY       = 'C:'
    *    MULTISELECTION          =
      changing
        file_table              = ifiletable
        rc                      = rc
    *    USER_ACTION             =
      EXCEPTIONS
        FILE_OPEN_DIALOG_FAILED = 1
        CNTL_ERROR              = 2
        ERROR_NO_GUI            = 3
        others                  = 4.
    read table ifiletable into xfiletable index 1.
    if sy-subrc = 0.
      p_file1 = xfiletable-FILENAME.
    endif.
    Regards,
    RIch Heilman

  • The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

    I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
    The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
    Thanks,
    Venu S.
    Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

    Hi Venu S,
    Based on my research, you might encounter a known issue, please try the hotfix in this KB:
    http://support.microsoft.com/kb/928385
    Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
    The version of Windows Server you are using
    The result of SELECT @@VERSION
    The scenario when you get this error
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • Invalid report File path-crystal report

    Hi Every one,
    I created Crystal Layout for GRPO PLD.When I am trying to import it is showing 'Invalid report file path',But it is working fine in another server.
    Please suggest.
    Thanks and Regards
    DEV

    Hi,
    Not sure below SAP note related to above issue:
    1710613 - CR_Multiple Data Sources Not Recognized After Importing
    Multi-Database Crystal Reports
    1668274 - Print Draft with Crystal Layout
    Thanks & Regards,
    Nagarajan

  • Creation of logical file path

    hi, i am very new to this field and i need this urgently.. please help..
    i am not able to create a physical file from a logical file say for eg "zlogic".. i have been given a certain "Pathintern" for the physical file.. e.g. Pathintern = zobj.. the syntax group is 'unix' but, what do i fill in the physical path..  and i also have used the function module file_get_name but i dont know the changes to be made in the function module.. please help..

    Sorsingh,
    try this search result (are you new to the search field?).
    [SAP: creation of logical file path|http://www.google.co.jp/search?hl=en&q=SAP%3Acreationoflogicalfile+path&btnG=Search&aq=f&oq=]
    Let us know which part of the online help you can not understand.
    Regards,
    Clemens

  • How to get the file path from HTML input form in Firefox3

    In IE7 (and probably all famous browsers, including old Firefox 2), if we submit a file like 'C:\folder1\folder2\folder3\filename' it works properly and gives the full path to the file and the filename.
    In Firefox 3, it returns only 'filename', because of their new 'security feature' to truncate the path, as explained in Firefox bug tracking system (https://bugzilla.mozilla.org/show_bug.cgi?id=143220)
    I have no clue how to overcome this 'new feature'.
    Can anyone help to find a single solution to get the file path both on Firefox 3 and IE7?
    Thanks in advance....

    Doubleposted and ignored any previous answer: [http://forums.sun.com/thread.jspa?threadID=5342405]. Don't do that. It's rude.
    Regarding to your "problem": why do you need the file path?

  • Logical file path problem in lsmw

    Hi folks,
    I created logical file  path in FILE tcode. its created and assigned physical file path to logical file path.
    then i am assigning that logical file path into lsmw step (specify file step).
    under specify file i am assigning into import data and convert data.
    once read data step completed read data must be save under this physical file but data is not saving under this path.
    can any one help me out this..
    1.can any one help how to create physical file in file tcode
    2.how to assigne that physical file to lsmw step specify file

    Hi Srikanth,
    There is no need to create the logical file path using the FILE transaction.
    Under Specify file step, you need to give your local file path in LEGACY DATA Section.
    Please check the below link in using the LSMW step by step.
    http://wiki.sdn.sap.com/wiki/display/ABAP/LSMWStepsin+Detail
    Hope this helps.
    Regards,
    Satish Kanteti

  • File browse : How to keep the file path in the file browse field?

    Hello,
    I have
    1) file browse field called P2_FILE_PATH.
    2) a select list with submit : P2_REGION
    If i upload some file d:\abc.gif , then select some region in the P2_REGION,
    P2_FILE_PATH will become empty. But in the session, i can find the blob value. but not the "d:\abc.gif "
    Using the following script I could capture the value of P2_FILE_PATH in a field
    P2_TEST.
    onload="javascript:document.getElementById(P2_FILE_PATH').value = document.getElementById('P2_TEST').value;"
    P2_TEST contains d:\abc.gif .
    How to retain the file path, though some other field is selected and submitted?
    Thanks in advance.
    Regards,
    Archana

    Hello Archana,
    You can't do what you want because of some HTML security restrictions – nothing to do with APEX. As you found out, You can capture the value of this item. You can't set it. After submitting the page, the browser is the one to clear the item.
    The only workaround is to work with AJAX and not submit the page until the end of the user input phase.
    Regards,
    Arie.

  • How to get Sequence file path In "Sequentia​lModel.Seq​"?

    Hello
    I need to get the sequence file path in "SequentialModel.seq" before the "GetReportoptions" Callback is called.
    I found that step "Determine Report File Path" in "Sequenctialmodel.seq" returns the sequence file path but i.e after executing quite a series of steps.
    i need to get  this sequence file path in the starting of "SequentialModel.seq".
    looking forward to hear from you
    Thanks n Regards
    Kulwant

    Hello Kulwant,
    try "RunState.InitialSelection.SelectedFile.Path" or "RunState.ProcessModelClient.Path" at the beginning of SequentialModel.seq please.
    Regards
    MY

Maybe you are looking for