Regarding Filter in ALV display
Hi Experts,
I have a problem wih the filter option of the ALV. if choose the date field for filtering it shows the message "Correct the distance (2) between "." and "." or "." and ","" when given for docu number it shows as "Entry is too long: Only 8 digits are allowed in the whole number part" can you help me????
please provide any solution for this issue
Hi,
Declare the date field as sy-datum in the internal table.
In field catalog give it is DATS.
This will solve your problem.
Reward if helpful.
Similar Messages
-
Regarding Vendor wise ALV Display
Dear All,
I am working on a report which has different fields like vendor , Doc No., Date, Amount. I am able to display all these fields for all the vendors in single alv grid. I want the report to display all these fields vendor wise in diffent Alv grid. Foe e.g.,
Vendor Code: 111111
Vendor Name : xyz ltd.
Doc no . Date Amount
11 01.05.2010 50000
12 02.05.2010 10000
Vendor Code: 222222
Vendor Name : pqr ltd.
Doc no . Date Amount
13 03.05.2010 5000
14 04.05.2010 1000
Pls, suggest any good Solutions.
Thanks & Regards,
Sandip SonarThank U sandeep,
But I want the list for all the vendors entered in selection-screen.
Thanks again,
Sandip Sonar -
How to use filter for alv display in webdynpro
hi,
i have use select-options and what ever data is coming from the data base i display it using alv.
i also want to include functionality like filter and all that , that comes in normal alv.please guide me how can i do it.
thankshi please remind that this is not the proper forum for this ...go to this
Expert Forums » ABAP Development » UI Programming -
About filter in alv grid display
Hi,
I am practicing on REUSE_ALV_GRID_DISPLAY in that i want to know about how to use some fields like
*ITFILTER*_
IT_ALV_GRAPHICS
IT_HYPERLINK
IT_ADD_FIELDCAT
IT_EXCEPT_QINFOHi Rock.
I would like to suggest you a couple of references which quite relate to your case,
REUSE_ALV_GRID_DISPLAY - Output of a simple list (single-line)
[SDN - Reference for Using REUSE_ALV_GRID_DISPLAY - Basic Program|alv prog;
[SDN - Reference for Use of IT_FILTER in REUSE_ALV_GRID_DISPLAY |Doubts in ALV?;
[SDN - Reference for use of IT_FILTER with CODE in REUSE_ALV_GRID_DISPLAY|ALV Report;
[SDN - Refernce for Using IT_ALV_GRAPHICS in REUSE_ALV_GRID_DISPLAY|OOPs : SAVE and ALV Display Variant;
[SDN - Reference for Editing a graph in ALV (IT_ALV_GRAPHICS) using REUSE_ALV_GRID_DISPLAY|Edit Graph display ALV list display;
[SDN - Reference for use of IT_HYPERLINK in REUSE_ALV_GRID_DISPLAY|editable fields on ALV grid;
[SDN - Reference including example of IT_ADD_FIELDCAT in REUSE_ALV_GRID_DISPLAY|building top of page in ALV list;
[SDN - Reference for scenario for use of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|Background ID in ALV Grid;
[SDN - Reference for application example of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|PF Status in ALV list.;
Hope That's Usefull.
Good Luck & Regards.
Harsh Dave -
How to capture the values after applying filter in ALV.
Hi,
I have an ALV in my application with 10 projects displayed. Out of those 10 projects, 5 projects have banking as industry.
when you filter the ALV based on industry banking I get 5 projects .In run time how can I capture only these 5 projects. when I debugged and saw the ALV table node is holding 10 prj not 5 prj.
How can read only those 5 values. Kindly help me out with sample code.
Thanks,
PriyaHi,
The class name is correct - CL_SALV_WD_FIELD. When you refer the model object(CL_SALV_WD_CONFIG_TABLE-IF_SALV_WD_FIELD_SETTINGS) this will return the field for which
you have applied filter by passing the field name.
Before you try out this approach, check the ALV event ON_CELL_ACTION fro that column name to capture the filtering value. Based on this loop at the table where field eq <<filerting value>> and get the filtered records.
As you have get_static_attributes_table it deosnot return the filtered values.
Regards,
Lekha. -
How to filter standard ALV report with custom UI element?
Hello Expert,
I got a requirement to filter standard ALV report based on the custom UI element (which is created in the screen before displaying the ALV report). Upon entering the values in the Custom field, the ALV report is displayed accordingly.
Any ideas how to approach it?
Thanks,
MohammedHi,
Okay, let me explain the steps in detail
Let us say you have alv table with 10 records and alv table is shown first time with all 10 records
Create an internal table in component controller's attribute GT_ORIGINAL_DATA and save all 10 records into this table first time
Now, user enters value in FILTER_MATNR field 123 and press apply_filter button or press enter key
Read the value of field filter_matnr and get the only matching records from global internal table GT_ORIGINAL_DATA into local internal table as below
data lv_matnr type matnr.
data lt_data like wd_comp_controller->gt_original_data.
" read the value from context attribute of filter_matnr
lv_matnr = ???
" copy all data into local table
lt_data[] = wd_comp_controller->gt_original_data.
"delete the records which does not match
delete lt_data where matnr NP lv_matnr.
Now, bind the data lt_data to context node of alv table
Hope this helps you.
Regards,
Rama -
Documentaion for the report in the ALV display
Hi
I am using the function module 'REUSE_ALV_LIST_DISPLAY
' to display the list. I want some options which can display the documentation of the report after ALV displays the list.
Now i am using the documentation (se38) for the report which we can see pressing a button 'i' on the selection screen.
RameshHi Ramesh,
i use it like this:
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = 'MAIN'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_VARIANT = VARIANT
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORT
IT_FILTER = FILTER
I_SAVE = 'A'
IT_EVENTS = EVENTS
IT_EVENT_EXIT = EVENT_EXIT
IS_PRINT = PRINT
I_TABNAME_HEADER = 'HEADER'
I_TABNAME_ITEM = 'BESTAND'
IS_KEYINFO = KEYINFO
TABLES
T_OUTTAB_HEADER = HEADER
T_OUTTAB_ITEM = BESTAND
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
And this:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
aktueller Satz beider Tabellen lesen, da hierarchisch
READ TABLE HEADER INDEX RS_SELFIELD-TABINDEX.
READ TABLE BESTAND INDEX RS_SELFIELD-TABINDEX.
IF R_UCOMM EQ '&IC1' AND RS_SELFIELD-TABNAME = 'HEADER'.
IF RS_SELFIELD-FIELDNAME = 'QMNUM'.
PERFORM IW53 USING HEADER-QMNUM.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'AUFNR' AND HEADER-AUFNR <> SPACE.
PERFORM CS_AUFTRAG USING HEADER-AUFNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'EQUNR'.
PERFORM PM_HIER USING HEADER-EQUNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
PERFORM MM03 USING HEADER-MATNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'SERIALNR'.
PERFORM IQ03 USING HEADER-MATNR HEADER-SERIALNR.
ENDIF.
ELSEIF R_UCOMM = '&IC1' AND RS_SELFIELD-TABNAME = 'BESTAND'.
IF RS_SELFIELD-FIELDNAME = 'OTGRP'.
PERFORM EXCEL_OBJEKT.
ENDIF.
ELSEIF R_UCOMM = 'REFR'.
Ausgabe neu einlesen
RS_SELFIELD-REFRESH = 'X'.
PERFORM DATEN_EINLESEN.
Programmdokumentation.
ELSEIF R_UCOMM = 'DOKU'.
CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'
EXPORTING
DOKCLASS = 'RE'
DOKNAME = PROGNAME
SHORT_TEXT = 'X'
EXCEPTIONS
CLASS_UNKNOWN = 1
OBJECT_NOT_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I010 WITH 'Keine Dokumentation vorhanden!'.
ENDIF.
ELSEIF R_UCOMM = 'GRAPH'.
PERFORM GRAPHIK.
ELSE.
MESSAGE I010 WITH 'Bitte markieren sie eine gültige Tabellenzeile!'.
ENDIF.
ENDFORM.
And it works in the Output-List correct.
Regards, Dieter -
Hi all.
we are phasing a problem.
I am using alv to display in output.
I am using a Quantiti field (BDMNG),.
in this field if nodata is there then it is showing 0.000(that is the default value).
I don't want those zeros.I want only space(blank only).
Can any body help me to solve this issue.
Thanks in advance
Eswar.Hai,
While building field catalog For quantity field Set the NO-ZERO attribute to 'X'.
Or you can change the quantity filed to character in the alv display.
Mark points if helpful.
Regards,
Umasankar -
How to add an extra field in the alv display(Scope of List:ALV) for me55.
Hello..
I've to display 2 fields- (wbs element description) and (network description) along with the standard ALV display, for the Account Assignment type 'Q' and 'N' of all purchase requisitions being displayed.
I was suggested to modify the standard program RM06BF00.
Can you please let me know where and how should I modify the program RM06BF00. Is there any userexit or badi to add my fields??
Thanks in advance.
With Regards,
HimHello,
If we create a Z report for this program, can anyone please tell me where can I find the function "REUSE_ALV_GRID_DISPLAY" in the given program so that I can add my fields along with the default filelds displayed...
Thanks
~Him -
End of page in ALV display using OOPS
Hi all,
How can i display end of page or footer in ALV display using OOPS concept.
Thanks,
vinitHi ,
Try using this code.
First add a handler method in your handler class definition as:
e.g. METHOD handle__end_of_page
FOR EVENT print_end_of_page OF cl_gui_alv_grid .
Then implement the method in the implementation part of your local class.
e.g. METHOD handle_print_end_of_page .
WRITE:/ 'Flights Made on ', sy-datum .
ENDMETHOD .
And register this method as the handler.
SET HANDLER gr_event_handler->handle_print_end_of_page FOR gr_alvgrid .
Hope this helps.
Regards,
Janaki. -
Download to excel from alv display
Hi,
How to download to excel from alv display.I am using object oriented abap for using alv.If i click export->spreadsheet i am getting fatal error and if i export->local file->spreadsheet i am getting only the column names and heading but no contents.Can anyone tell me how to overcome this problem.
Regards,
Sowmya.Hi Sowmya,
Just put break point near FM reuse_alv_grid_display and check if internal table which is used to display output is popullated or not.
Regards Sachin. -
Hi all,
I am using alv to display Currency fields in a tax return report.........I want to display the sum of a perticular column or all the columns when i press the total button from alv selecting the required columns. But its coming only for first two columns not for all. Please help.
Regards.Hi,
This ALV program have all the basic report requirements such as page heading, page no, sub-total and a grand total.
* This is a basic ALV with the followings:-
* - Page Heading
* - Page No
* - Sub-Total
* - Grand Total
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
* Print Parameters
PARAMETERS:
P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
P_RESERV TYPE I. "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD USING GS_PRINT. "Print PARAMETERS
START-OF-SELECTION.
* TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
* DATA FIELD CATALOG
* Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY = ' '. "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-NO_OUT = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD3'.
FIELDCAT_LN-TABNAME = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT = ' '.
FIELDCAT_LN-DO_SUM = 'X'. "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
* DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS = 1.
GS_SORT-UP = 'X'.
GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS = 2.
GS_SORT-UP = 'X'.
*GS_SORT-SUBTOT = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
* ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
* IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
* HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
* define END_OF_PAGE event
* READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
* INTO LS_EVENT.
* IF SY-SUBRC = 0.
* MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
* APPEND LS_EVENT TO LT_EVENTS.
* ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
* CLEAR GS_LINE.
* GS_LINE-TYP = 'A'.
* GS_LINE-INFO = 'ACTION'.
* APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
* PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES = P_RESERV.
ENDFORM.
*END OF ZALV PROGRAM
Regards
Sudheer -
have few queries on alv
1..i want to colout hte columns of my alv display say the first three columns with one colour and then the next three columns witth another colour and so on.
2.i have just displayed the output on alv and when i am double clicking on any record it is saying <b>Call (PERFORM) to a non-existent routine<b>.
now what i want i sthat is there any way by which i can avoid this thing means if user double clicks on any thing nothing should be done adn it should remain at the list.
3.now i n case i want to have that option where if the user double clicks on any record then it should dispaly the corresonding record like we have in report display at line-selection
is there some thing like that in alv also.
Thanks and RegardsHi Ashish,
check the below code to solve u r proble...
Just create PF STATUS for the below code and execute it...
*******Declare Data Areas for List Viewer (Begin)***********
TYPE-POOLS: SLIS.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF FIELDCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
LAYOUT TYPE SLIS_LAYOUT_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
COUNT TYPE I,
COLCELL TYPE SLIS_FIELDNAME VALUE 'MATNR'.
DATA: COL_POS TYPE I,
W_FNAME TYPE DD03L-FIELDNAME.
******Declare Data Areas for List Viewer (End)**************
******Declare Internal Table to Store Selected Data (Begin)*
DATA LS_CELLCOLOR TYPE SLIS_T_SPECIALCOL_ALV WITH HEADER LINE.
DATA: BEGIN OF TSPFLI OCCURS 10 ,
CHECK TYPE SLIS_FIELDNAME,
COLOR(3),
COLCELLS TYPE SLIS_T_SPECIALCOL_ALV.
INCLUDE STRUCTURE SPFLI.
DATA : END OF TSPFLI.
*Declare Internal Table to Store Selected Data (Begin) For sflight*
DATA:
W_SPFLI LIKE LINE OF TSPFLI.
DATA : BEGIN OF FS_SFLIGHT,
CHECK TYPE SLIS_FIELDNAME,
COLOR(3).
INCLUDE STRUCTURE SFLIGHT.
DATA : END OF FS_SFLIGHT.
DATA
T_SFLIGHT LIKE
STANDARD TABLE
OF FS_SFLIGHT.
*Declare Internal Table to Store Selected Data (Begin) For sbook*
DATA:
W_SFLIGHT LIKE LINE OF T_SFLIGHT.
DATA : BEGIN OF FS_SBOOK,
CHECK TYPE SLIS_FIELDNAME.
INCLUDE STRUCTURE SBOOK.
DATA : END OF FS_SBOOK.
DATA
T_SBOOK LIKE
STANDARD TABLE
OF FS_SBOOK.
******Declare Internal Table to Store Selected Data (End)***
*******Select Data into Internal Table (Begin) ***************
SELECT *
INTO CORRESPONDING FIELDS OF TSPFLI
FROM SPFLI.
APPEND TSPFLI.
CLEAR TSPFLI.
ENDSELECT.
Select Data into Internal Table (End) ****************
PERFORM BUILD_FIELDCAT4.
PERFORM BUILD_FIELDCAT6.
PERFORM BUILD_FIELDCAT7.
PERFORM BUILD_LISTCAT.
PERFORM BUILD_EVENTCAT.
PERFORM START_LIST_VIEWER.
*& Form build_fieldcat4
text
FORM BUILD_FIELDCAT4.
FIELDCAT_LN-FIELDNAME = 'CHECK'.
APPEND FIELDCAT_LN TO FIELDCAT.
CLEAR FIELDCAT_LN.
ENDFORM. "BUILD_FIELDCAT4
*& Form build_fieldcat6
text
FORM BUILD_FIELDCAT6.
FIELDCAT_LN-FIELDNAME = 'COLOR'.
FIELDCAT_LN-OUTPUTLEN = 4.
APPEND FIELDCAT_LN TO FIELDCAT.
CLEAR FIELDCAT_LN.
ENDFORM. "build_fieldcat6
*& Form BUILD_FIELDCAT7
text
FORM BUILD_FIELDCAT7.
FIELDCAT_LN-FIELDNAME = 'COLCELLS'.
APPEND FIELDCAT_LN TO FIELDCAT.
CLEAR FIELDCAT_LN.
ENDFORM. "build_fieldcat6
*& Form build_listcat
text
FORM BUILD_LISTCAT.
LAYOUT-BOX_FIELDNAME = 'CHECK'.
LAYOUT-INFO_FIELDNAME = 'COLOR'.
LAYOUT-COLTAB_FIELDNAME = 'COLCELLS'.
ENDFORM. "build_listcat
*& Form BUILD_EVENTCAT
text
FORM BUILD_EVENTCAT.
EVENTCAT_LN-NAME = 'PF_STATUS_SET'.
EVENTCAT_LN-FORM = 'STATUSSET'.
APPEND EVENTCAT_LN TO EVENTCAT.
EVENTCAT_LN-NAME = 'USER_COMMAND'.
EVENTCAT_LN-FORM = 'USERCOMM'.
APPEND EVENTCAT_LN TO EVENTCAT.
ENDFORM. "BUILD_EVENTCAT
*& Form STATUSSET
text
-->RT_EXTAB text
FORM STATUSSET
USING RT_EXTAB TYPE SLIS_T_EXTAB.
DATA
W_EXTAB TYPE SLIS_EXTAB.
CLEAR RT_EXTAB[].
W_EXTAB-FCODE = 'SBOOK'.
APPEND W_EXTAB TO RT_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING RT_EXTAB.
ENDFORM. "STATUSSET
*& Form START_LIST_VIEWER
text
FORM START_LIST_VIEWER.
DATA: PGM LIKE SY-REPID.
PGM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = PGM
i_callback_pf_status_set = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT = LAYOUT
IS_VARIANT = ' '
IT_EVENTS = EVENTCAT
IT_EVENT_EXIT =
TABLES
T_OUTTAB = TSPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. "START_LIST_VIEWER
*& Form USERCOMM
text
-->UCOMM text
-->SELFIELD text
FORM USERCOMM USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CLEAR FIELDCAT[].
CASE UCOMM.
WHEN 'SFLIGHT'.
CLEAR T_SFLIGHT[].
LOOP AT TSPFLI INTO W_SPFLI.
IF W_SPFLI-CHECK EQ 'X'.
SELECT *
FROM SFLIGHT
APPENDING CORRESPONDING FIELDS OF TABLE T_SFLIGHT
WHERE CARRID = W_SPFLI-CARRID
AND CONNID = W_SPFLI-CONNID.
W_SPFLI-CHECK = '1'.
W_SPFLI-COLOR = 'C21'.
MODIFY TSPFLI FROM W_SPFLI TRANSPORTING CHECK COLOR.
ENDIF.
ENDLOOP.
PERFORM BUILD_FIELDCAT9.
PERFORM BUILD_EVENTCAT1.
PERFORM START_LIST_VIEWER1.
ENDCASE.
SELFIELD-REFRESH = 'X'.
ENDFORM. "USERCOMM
*& Form START_LIST_VIEWER1
text
FORM START_LIST_VIEWER1.
DATA: PGM LIKE SY-REPID.
PGM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = PGM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
IT_SORT =
IT_EVENTS = EVENTCAT
TABLES
T_OUTTAB = T_SFLIGHT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "START_LIST_VIEWER1
*& Form BUILD_EVENTCAT1
text
FORM BUILD_EVENTCAT1.
CLEAR EVENTCAT[].
EVENTCAT_LN-NAME = 'PF_STATUS_SET'.
EVENTCAT_LN-FORM = 'STATUSSET1'.
APPEND EVENTCAT_LN TO EVENTCAT.
CLEAR EVENTCAT_LN.
EVENTCAT_LN-NAME = 'USER_COMMAND'.
EVENTCAT_LN-FORM = 'USERCOMM1'.
APPEND EVENTCAT_LN TO EVENTCAT.
ENDFORM. "BUILD_EVENTCAT
*& Form STATUSSET1
text
-->RT_EXTAB text
FORM STATUSSET1
USING RT_EXTAB TYPE SLIS_T_EXTAB.
DATA
W_EXTAB TYPE SLIS_EXTAB.
CLEAR RT_EXTAB[].
W_EXTAB-FCODE = 'SFLIGHT'.
APPEND W_EXTAB TO RT_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING RT_EXTAB.
ENDFORM. "STATUSSET
*.................................USERCOMM1..................
FORM USERCOMM1 USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CLEAR FIELDCAT[].
CASE UCOMM.
WHEN 'SBOOK'.
CLEAR T_SBOOK[].
LOOP AT T_SFLIGHT INTO W_SFLIGHT.
IF W_SFLIGHT-CHECK EQ 'X'.
SELECT *
FROM SBOOK
APPENDING CORRESPONDING FIELDS OF TABLE T_SBOOK
WHERE CARRID = W_SFLIGHT-CARRID
AND CONNID = W_SFLIGHT-CONNID
AND FLDATE = W_SFLIGHT-FLDATE.
W_SFLIGHT-CHECK = '1'.
W_SFLIGHT-COLOR = 'C81'.
MODIFY T_SFLIGHT FROM W_SFLIGHT TRANSPORTING CHECK COLOR.
ENDIF.
ENDLOOP.
PERFORM BUILD_FIELDCAT9.
PERFORM BUILD_EVENTCAT2.
PERFORM START_LIST_VIEWER2.
ENDCASE.
SELFIELD-REFRESH = 'X'.
ENDFORM. " USERCOMM1
*& Form BUILD_FIELDCAT9
text
FORM BUILD_FIELDCAT9.
CLEAR FIELDCAT[].
FIELDCAT_LN-FIELDNAME = 'CHECK'.
APPEND FIELDCAT_LN TO FIELDCAT.
CLEAR FIELDCAT_LN.
LAYOUT-BOX_FIELDNAME = 'CHECK'.
ENDFORM. "BUILD_FIELDCAT8
*& Form START_LIST_VIEWER2
text
FORM START_LIST_VIEWER2.
DATA: PGM LIKE SY-REPID.
PGM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PGM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'SBOOK'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
IT_EVENTS = EVENTCAT
TABLES
T_OUTTAB = T_SBOOK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "START_LIST_VIEWER1
*& Form BUILD_EVENTCAT2
text
FORM BUILD_EVENTCAT2.
CLEAR EVENTCAT[].
EVENTCAT_LN-NAME = 'PF_STATUS_SET'.
EVENTCAT_LN-FORM = 'STATUSSET2'.
APPEND EVENTCAT_LN TO EVENTCAT.
ENDFORM. "BUILD_EVENTCAT
*& Form STATUSSET1
text
-->RT_EXTAB text
FORM STATUSSET2
USING RT_EXTAB TYPE SLIS_T_EXTAB.
DATA
W_EXTAB TYPE SLIS_EXTAB.
CLEAR RT_EXTAB[].
W_EXTAB-FCODE = 'SFLIGHT'.
APPEND W_EXTAB TO RT_EXTAB.
W_EXTAB-FCODE = 'SBOOK'.
APPEND W_EXTAB TO RT_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING RT_EXTAB.
ENDFORM. "STATUSSET
Reward points if it is helpful...
Regards,
Omkar.
Message was edited by:
Omkaram Yanamala -
Hi,
I have a requirement where the headings for a ALV display have to be in 2 or 3 rows.For an e.g. Posting Date must be as Posting and Customer name as
Date
Customer
Name
Is it possible to do this in ALV?I tried using row value while building the fieldcatalog but it did not work.
Please suggest me some ways to do this.Its urgent.
Thanks,
Sandeep.Hi Dude,
For first header
wa_hader-type = 'H'.
wa_hader-info = 'Main Headding'.
append wa_heaer to it_header.
For Sub header
wa_hader-type = 'S'.
wa_hader-info = Sub Headding1.
append wa_heaer to it_header.
Finally call the function module
Reuse_Alv_commentray_write function module
then pass the parameter
exporting
it_list_commentary = it_header.
Try this
Hope it will work....
Thanks & Regards
Ramakrishna Pathi -
ALV display for row s and columns in this format.have ur full points..
Hi ALL
I have to dispalay data in the ALV format as :
Basic
DA
HRA
PF
VPF
20000
500
5000
| 1500 | 600 | |
Details : Basic HRA in one Row and PF , VPF in second Row.
The Amount regarding htese fields are also displayed in the next rows for all emp. numbers.
its urgent for me and need helpful answers...
Regards
Lakhansee the attached code it will display the hierarchial display as per your need
change the internal tables with dat of your own orgn structure and pass it to the fun module.
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB01-+
AND zpallet_id = t_data_tab-lgtor."MB01+
MB01 - INSERT START
If pallet number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently in a
specified pallet
IF NOT s_palno IS INITIAL AND not t_data_tab-zpallet_no in s_palno
AND w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
ENDIF.
MB01 - INSERT END
IF NOT t_data_tab-zpallet_no IN s_palno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
IF sy-subrc = 0. "mb01+
perform read_van. "MB01+
SELECT SINGLE zvan_no zvan_print zeod_print FROM zvantr
INTO (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
WHERE zpallet_no EQ t_data_tab-zpallet_no.
MB01 - INSERT START
If van number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently on a
specified van
IF NOT s_vanno IS INITIAL AND not t_data_tab-zvan_no in s_vanno AND
w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
perform read_van.
ENDIF. "mb01-
MB01 - INSERT END
IF NOT t_data_tab-zvan_no IN s_vanno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
ENDIF.
APPEND t_data_tab.
ENDLOOP.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want
these"TR03+
IF s_exidv IS INITIAL. "TR03+
*{ REPLACE UKMK900355 1
*\ LOOP AT it_vepo.
*\ READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
*\ posnr = it_vepo-posnr
*\ BINARY SEARCH. "SUM
*\ IF sy-subrc = 0.
*\ DELETE it_lips INDEX sy-tabix.
*\ ENDIF.
*\ ENDLOOP.
Higher-level HUs can contain more than one delivery item " AS01
LOOP AT it_lips. " AS01
READ TABLE t_vepo_low WITH KEY vbeln = it_lips-vbeln " AS01
posnr = it_lips-posnr. " AS01
CHECK sy-subrc EQ 0. " AS01
DELETE it_lips. " AS01
ENDLOOP. " AS01
*} REPLACE
IF NOT it_lips[] IS INITIAL.
move any unpacked items to the data table
PERFORM move_lips_to_table.
ENDIF.
ENDIF. "TR03+
*<---- TR01+ End
get relevant status icons
PERFORM select_icons.
prepare ALV data
PERFORM prepare_alv.
ENDFORM. " select_data
*& Form select_icons
select icons for display and move data to display table
FORM select_icons.
DATA: w_disp_tab LIKE zpickdisp,
w_disp_head LIKE zpickhead,
w_color LIKE zpickdisp-color,
ov_icon LIKE zpickdisp-ov_icon,
gi_icon LIKE zpickdisp-gi_icon,
to_icon LIKE zpickdisp-to_icon,
lp_icon LIKE zpickdisp-lp_icon,
pc_icon LIKE zpickdisp-pc_icon,
lv_icon LIKE zpickdisp-lv_icon,
vm_icon LIKE zpickdisp-vm_icon,
em_icon LIKE zpickdisp-em_icon,
sp_icon LIKE zpickdisp-sp_icon, " ANV SR#11523
t_ovst_tab LIKE t_disp_tab WITH HEADER LINE.
CONSTANTS: c_col1(3) VALUE 'C10',
c_col2(3) VALUE 'C20'.
SORT t_data_tab BY lgtor vbeln.
w_color = c_col2.
LOOP AT t_data_tab.
AT NEW lgtor.
fill ALV header table
CLEAR w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
APPEND w_disp_head TO t_disp_head.
ENDAT.
goods issue status & overall amber/green only
CASE t_data_tab-wbstk.
WHEN c_c.
MOVE icon_green_light TO gi_icon.
MOVE icon_green_light TO ov_icon.
WHEN OTHERS.
MOVE icon_red_light TO gi_icon.
MOVE icon_yellow_light TO ov_icon.
ENDCASE.
transfer order status
CASE t_data_tab-lvsta.
WHEN c_a.
MOVE icon_red_light TO to_icon.
WHEN c_b.
MOVE icon_yellow_light TO to_icon.
WHEN c_c.
MOVE icon_green_light TO to_icon.
WHEN space.
write N/A
to_icon = 'N/A'.
ENDCASE.
loaded to pallet status
IF NOT t_data_tab-zpallet_no IS INITIAL.
MOVE icon_green_light TO lp_icon.
ELSE.
MOVE icon_red_light TO lp_icon.
ENDIF.
pallet count status
IF NOT t_data_tab-zcount_check IS INITIAL.
MOVE icon_green_light TO pc_icon.
ELSE.
MOVE icon_red_light TO pc_icon.
ENDIF.
loaded to van status
IF NOT t_data_tab-zvan_no IS INITIAL.
MOVE icon_green_light TO lv_icon.
ELSE.
MOVE icon_red_light TO lv_icon.
ENDIF.
van manifest status
IF NOT t_data_tab-zvan_print IS INITIAL.
MOVE icon_green_light TO vm_icon.
ELSE.
MOVE icon_red_light TO vm_icon.
ENDIF.
Start of changes by ANV SR#11523
Shipment status
IF NOT t_data_tab-tknum IS INITIAL.
MOVE icon_green_light TO sp_icon.
ELSE.
MOVE icon_red_light TO sp_icon.
ENDIF.
End of changes by ANV SR#11523
end of day manifest status
IF NOT t_data_tab-zeod_print IS INITIAL.
MOVE icon_green_light TO em_icon.
ELSE.
MOVE icon_red_light TO em_icon.
ENDIF.
move working data table to display table
MOVE-CORRESPONDING t_data_tab TO w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-sp_icon = sp_icon. "ANV SR#11523
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
IF w_disp_tab-packvorschr IS INITIAL.
w_disp_tab-packvorschr = 'N/A'.
ENDIF.
IF w_disp_tab-exidv IS INITIAL.
w_disp_tab-exidv = 'N/A'.
ENDIF.
IF w_disp_tab-zpallet_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zpallet_no.
ENDIF.
IF w_disp_tab-zvan_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zvan_no.
ENDIF.
display different color for new doc number
AT END OF vbeln.
IF w_color = c_col1.
w_color = c_col2.
ELSEIF w_color = c_col2.
w_color = c_col1.
ENDIF.
ENDAT.
APPEND w_disp_tab TO t_disp_tab.
CLEAR w_disp_tab.
ENDLOOP.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
DATA: ov_stat_red(1).
CLEAR w_disp_tab.
SORT t_disp_tab BY vbeln.
LOOP AT t_disp_tab INTO w_disp_tab.
AT NEW vbeln.
check all line items for delivery
LOOP AT t_data_tab WHERE vbeln = w_disp_tab-vbeln.
IF t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
EXIT.
ELSE.
leave green/amber status icon as previosly determined
ENDIF.
ENDLOOP.
IF ov_stat_red = c_yes.
set overall status to red for all items in that delivery
CLEAR ov_stat_red.
MOVE icon_red_light TO w_disp_tab-ov_icon.
MODIFY t_disp_tab FROM w_disp_tab TRANSPORTING ov_icon
WHERE vbeln = w_disp_tab-vbeln.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " select_icons
*& Form fill_layout
fill ALV layout parameters
FORM fill_layout.
CLEAR g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
ENDFORM. " fill_layout
*& Form fill_sort
fill ALV sort table
FORM fill_sort.
DATA: w_g_sort TYPE slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
Maybe you are looking for
-
Error message for calling oracle support
Hi, We are getting the following error codes: ORA-27302 Ora-27303 Ora-2000 ora-1013 can anyone please help out.The error message is for contacting Oracle support Thanks a heap regards, vinayak
-
When I go in to SYSTEM PREFERENCE and click on DESKTOP/SCREENSAVERS it says pictures loading but then I get that coloured circle and nothing else - I then have to force quit
-
Sales Document type not defined
Hi I am working on an interface. Design is like below Purchase Order->File Adapter->XI (BPM)->RFC Adapter->Sales Order in R/3 When I am trying to cretae a sales document in R/3, I am getting a message back from R/3 saying 'Sales Document is not defin
-
Alv list ..records with green ,red, yellow,grey lights
Hello Experts, I have one requirement, in my alv list if the records match the recors should be displayed with GREEN light, similarly for other mmatches it should display with red, yellw, grey lights. please help me by sending the coding ,its an urge
-
Downloaded audiobook from iTunes to ios 7 can't find
Looked in music app under more. Cannot find the book.