Documentaion for the report in the ALV display

Hi
I am using the function module 'REUSE_ALV_LIST_DISPLAY
' to display the list. I want some options which can display the documentation of the report after ALV displays the list.
Now i am using the documentation (se38) for the report which we can see pressing a button 'i' on the selection screen.
Ramesh

Hi Ramesh,
i use it like this:
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = PROGNAME
I_CALLBACK_PF_STATUS_SET = 'MAIN'
            I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
            IS_VARIANT               = VARIANT
            IS_LAYOUT                = LAYOUT
            IT_FIELDCAT              = FIELDCAT
            IT_SORT                  = SORT
            IT_FILTER                = FILTER
            I_SAVE                   = 'A'
            IT_EVENTS                = EVENTS
            IT_EVENT_EXIT            = EVENT_EXIT
            IS_PRINT                 = PRINT
            I_TABNAME_HEADER         = 'HEADER'
            I_TABNAME_ITEM           = 'BESTAND'
            IS_KEYINFO               = KEYINFO
       TABLES
            T_OUTTAB_HEADER          = HEADER
            T_OUTTAB_ITEM            = BESTAND
       EXCEPTIONS
            PROGRAM_ERROR            = 1
            OTHERS                   = 2.
And this:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
aktueller Satz beider Tabellen lesen, da hierarchisch
READ TABLE HEADER INDEX RS_SELFIELD-TABINDEX.
READ TABLE BESTAND INDEX RS_SELFIELD-TABINDEX.
IF R_UCOMM EQ '&IC1' AND RS_SELFIELD-TABNAME = 'HEADER'.
    IF RS_SELFIELD-FIELDNAME = 'QMNUM'.
      PERFORM IW53    USING HEADER-QMNUM.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'AUFNR' AND HEADER-AUFNR <> SPACE.
      PERFORM CS_AUFTRAG USING HEADER-AUFNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'EQUNR'.
      PERFORM PM_HIER USING HEADER-EQUNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'MATNR'.
      PERFORM MM03 USING HEADER-MATNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'SERIALNR'.
      PERFORM IQ03 USING HEADER-MATNR HEADER-SERIALNR.
    ENDIF.
ELSEIF R_UCOMM = '&IC1' AND RS_SELFIELD-TABNAME = 'BESTAND'.
    IF RS_SELFIELD-FIELDNAME = 'OTGRP'.
      PERFORM EXCEL_OBJEKT.
    ENDIF.
ELSEIF R_UCOMM = 'REFR'.
Ausgabe neu einlesen
    RS_SELFIELD-REFRESH = 'X'.
    PERFORM DATEN_EINLESEN.
Programmdokumentation.
ELSEIF R_UCOMM = 'DOKU'.
CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'
EXPORTING
DOKCLASS = 'RE'
DOKNAME = PROGNAME
SHORT_TEXT = 'X'
EXCEPTIONS
CLASS_UNKNOWN = 1
OBJECT_NOT_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I010 WITH 'Keine Dokumentation vorhanden!'.
ENDIF.
ELSEIF R_UCOMM = 'GRAPH'.
    PERFORM GRAPHIK.
ELSE.
    MESSAGE I010 WITH 'Bitte markieren sie eine gültige Tabellenzeile!'.
ENDIF.
ENDFORM.
And it works in the Output-List correct.
Regards, Dieter

Similar Messages

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

The number of display columns in the report reached the limit. Help!!!

Hello Everyone,
This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
Error
The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
Thanks and regards
John
Edited by: JB on Mar 30, 2012 11:08 AM

Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
    id,
    name,
    blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
    id,
    name,
    dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz

The number of display columns in the report reached the limit" Interactive Report

I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created.   This does not happen when an aggregate has not been added to the IR report. It seems to happen because I have a control break on as well. When I turn off the control break it works but is not the result that we want. Interesting enough, if I filter the results down to 500 rows it works just fine. Does oracle treat aggregates as columns!? This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.

Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
    id,
    name,
    blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
    id,
    name,
    dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz

In the report we have to display DAY DESCRIPTION(Ex:Monday,Sunday,...)

In the report we have to display DAY DESCRIPTION(Ex:Monday,Sunday,...)in columns. How to get it? Can anyone help me?
Thanks in Advance

If we put calday in dril down we can display mm/dd/yyyy formate. Instead of this we have to display monday,tuesday,wednesday etc. corresponding to that date.
In the repot level if i go to properties there is no option for key and text. i think time charecteristics don't have that type of option.
If any doughts plz let me know
thanks 4 ur reply

Specifications for the report regarding the invoiced quantity.

Hi all SAP gurus,
I want to give specifications to the abaper regarding the layout of a report. The details are sales order, materials in it, order quantity, invoiced qty, balance qty and stock against the balance qty.
I want to know the table & field name where the qty is getting updated. Suppose order qty is 20, today i invoice 5 qty. The balance is 15. When i run the report, in the invoiced qty column the system should show 5. Tomorrow i invoice 10 qty, the balance will be 5. When i run the report again, in the invoiced qty column, the system should show 15.
Where is the data stored regarding the updated qty which is already invoiced.
The scenario is MTS. Is it possible to show the exact available qty in the balance qty. column some material may be confirmed for other sales order also.
Regards,
Allabaqsh G. Patil

Hi
Need to understand couple of more things before i tell you the fields as are you considering report Based ON invoice or delivery as you are saying that order quantity is 20 and invoice is 5 , ( do you mean to say delivered quantity is 5)
secondly since this report is for stock are you taking into the account of all the pending orders not yet delivered , partially deliverd.
Hope you understand this as this report could change every minute the order is delivered
And as per my knowledge there is no such table which can give you that information , you need to write a logic which will consider the open orders, partially delivery , and stuff into .....hope i am in Sync with what you are asking
Cheers

How can I print a label on the last page of the report in the margin

I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;

user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works..

How to format the report with the aggregated value

Hi,
I have 2 characteristics and 3 KFs in the infocube.
First field is Cost Center
Second field is creation Date
3rd field is KF1
4th field is KF2
5th field is KF3
I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
The date in the info cube is as follows.
Cost Ceneter Date( no Display)   KF1     KF2      KF3
CC1           01/01/2006          100     150      200
CC1           02/02/2006          75      100      95
CC1           05/02/2006          125      95      125
CC2           01/02/2006          75       25      85
CC2           02/02/2006          85       65      10
As the Date field is in query set to No display so the date appearing in the report is as follows
CC1       100        150        200
          75         100        95
          125          95        125
CC2       75           25        85
          85           65        10
But I want the aggregated value at cost senter level i.e.
CC1       300         245       420
CC2       160         90         95
I can not remove the Date frield from query as there is a formula variable defined on the date field.
Please let me know how to bring the report to the required format.
Bill
Message was edited by:
        Bill Bryan

If you are in new Bex, you can do it.
You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
Say you have
CH1--CH2CH3--CKF1
To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
Message was edited by:
        Ajay Das

How to Download the report from the workitem?

Hi,
I have one typical requirement that is to download the report from the Workitem by the manager?
Would any body please give the solution and procedure?
If you have any sample code for that give it tome?
Early reply is appriciable.
Regards,
Chow.

If it is an ALV report you don't have to do any coding. You don't say which report it is.
If it is a report that uses write statements you can also export to a spreadsheet, but of course the cell matching is not quite as for ALV reports since the report creator decides the alignment. Use the menu item "System" => "List" => "Save" (the menu item names may be a little different since I have translated them from Norwegian).

Please Help Urgently to refresh the report on the change in data

We want to refresh report at runtime for the Drill Down report if any user changes the Data. We changes the data from the form which is called from the report and we want to this effect on the report on the prompt.
Is there any method to close the report while it is in the queue of Background Engine? Can we refresh the report ? Please help urgently.
Thanks in Advance.

Pritesh,
Reports goes out to the database and fetches the data (not a snapshot) and returns the information, formats it and displays it. The only way to refresh, is to rerun the report.
If your are running from the server, you need to make sure you are not fetching from cache (you determine this from destype and set the life of the cache in the servername.ora file).
I am unaware of any way to programatically close the report once displayed. The user must take action to close the report (unless you call the operating system to kill the display). When you rerun the report from Oracle Forms, you will get fresh data.
Regards,
The Oracle Reports Team jls

Two commands in the report using the same parameter - fail under Java

I have a report that contains 2 SQL commands.
Both of these commands use one parameter X of type Number in their 'WHERE' clause.
When i'm viewing the report in CR 2008, i'm asked for a value of this parameter and all data is filled in the report - OK
The problem occurs when the same report is printed through Crystal Java Runtime:
Report is printed without data! - it's empty.
What we noticed in the debug information thrown by the Crystal libraries is that parameter value is set only in one of these commands:
Original statement 1:
select a.something
from ANM_T a
where a.anmid = {?PARAMETER01Id}
Original statement 2:
SELECT * from ANM_T a
WHERE a.anmid={?PARAMETER01Id}
OUTCOME of Statement 1:
select a.something
from ANM_T a
where a.anmid = 0
OUTCOME of Statement 2:
SELECT * from ANM_T a
WHERE a.anmid=9825
In above example we may see that crystal set the value only in the second statement - first one got 0 - i suspect its some default value.
Parameter in the Java code is set in the right way. In case of using only one statement it works. If we use two separate parameters (whose values are equal ) it also works.
// we have also the loop over the parameters
ParameterFieldController paramFieldController =
                report.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue( "", paramName, paramValue );
What is strange for me is that Crystal Reports enables to use the same parameter in two commands but if you edit one of them you may change the type of this parameter for a command ( for example from Number to String) but the parameter type in the second command remains unchanged ( it's strange because in my opinion it is the same parameter). In the Field Explorer under the Parameter Fields i still see one parameter of type used in the second command.

Hello all,
We have prepared some sample code to illustrate the issue.
We have modified the sample application (Link: [http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c07fec3e-3e11-2c10-1991-8c0fb0b82b75]) to that it also changes the parameter value. Parameter is used in two commands saved in report.
The code changing the parameters value looks like this:
private static void changeParameters(ReportClientDocument reportClientDoc) throws ReportSDKException {
          DataDefController dataDefController = reportClientDoc.getDataDefController();
        Fields fields = dataDefController.getDataDefinition().getParameterFields();
        for( int i = 0; i < fields.size(); i++ ){
            Field field = (Field)fields.getField( i );
            if( field.getKind() == FieldKind.parameterField ){
                        setParameter( ((ParameterField)field).getName(), "9825" , reportClientDoc);
private static void setParameter( String paramName, String paramValue, ReportClientDocument document ) throws ReportSDKException {
     ParameterFieldController paramFieldController =
                document.getDataDefController().getParameterFieldController();
     paramFieldController.setCurrentValue( "", paramName, paramValue );
We have tried the following codes to change the connection info used in commands:
Attempt 1
          Tables tables = databaseController.getDatabase().getTables();
          //Set the datasource for all main report tables.
          for (int i = 0; i < tables.size(); i++) {
               ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
               //Change connection information properties.
               IConnectionInfo connectionInfo = table.getConnectionInfo();
               //Set new table connection property attributes.
               connectionInfo.setAttributes(propertyBag);
               //Set database username and password.
               //NOTE: Even if these the username and password properties don't change when switching databases, the
               //database password is *not* saved in the report and must be set at runtime if the database is secured.
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);
               table.setConnectionInfo(connectionInfo);
               //Update old table in the report with the new table.
               databaseController.setTableLocation(table, tables.getTable(i));
               //databaseController.setTableLocation(tables.getTable(i), table);
Attempt 2
         newConnectionInfo.setAttributes(propertyBag);
         connectionInfo.setUserName(DBUSERNAME);
         connectionInfo.setPassword(DBPASSWORD);
         //preserve subreport links
         SubreportController src = doc.getSubreportController();
         Map<String, SubreportLinks> linkMapper = new HashMap<String,SubreportLinks>();
         for(String subreportName : src.getSubreportNames()){
             linkMapper.put(subreportName,
                 (SubreportLinks) src.getSubreportLinks(subreportName).clone(true));
         //If this connection needed parameters, we would use this field.
         Fields<IParameterField> pFields = doc.getDataDefController().getDataDefinition().getParameterFields();
         replaceConnectionInfos(doc.getDatabaseController(), newConnectionInfo, pFields);
         IStrings strs = src.getSubreportNames();
         Iterator<String> it = strs.iterator();
         while (it.hasNext()) {
           String name = it.next();
           ISubreportClientDocument subreport = src.getSubreport(name);
           pFields = subreport.getDataDefController().getDataDefinition().getParameterFields();
           replaceConnectionInfos(subreport.getDatabaseController(), newConnectionInfo, pFields);
         //reconnect subreport links since when using replaceConnection links are erased
         for(String subreportName : src.getSubreportNames())
           src.setSubreportLinks(subreportName, linkMapper.get(subreportName));
private static void replaceConnectionInfos(DatabaseController aDc, IConnectionInfo aNewConnInfo, Fields<IParameterField> aParameterField) throws ReportSDKException {
         ConnectionInfos cis = aDc.getConnectionInfos(null);
         for (IConnectionInfo oldConnInfo : cis)
           aDc.replaceConnection(oldConnInfo, aNewConnInfo, aParameterField, DBOptions._useDefault
               + DBOptions._doNotVerifyDB);
In both cases, the observed problem occurred. In one query the parameter was set properly, while on the other it was set to 0 (or empty string in case of string parameters). What is more, no data appeared on the print.
Do you happen to know the reason of this issue?How can we fix the problem?
Best regards
Mateusz Błaż

I want to fill the rows of the report from the loop

I want to fill the rows of the report from the loop
For example, in forms
cursor bdl is select code,decode(:global.user_lang,1,name,2,latin_name) name
from GL_ANALYSISHDR
begin
     go_block('bdls');
     clear_block;
     first_record;
     for rec in bdl loop
     :bdls.code:=rec.code;
     :bdls.name:=rec.name;
     next_record;
     end loop;
     go_block('bdls');
     first_record;
end;
I tried to use the REF CURSOR
But it return the values in one time and does not allow me to conduct and control of

Why do you need to do it by a curesor loop? Can't you put the query in the datamodel of the report and simply pass the parameter to restrict the query?

Unable to find the report in the manifest resources. Please build the project, and try again.

The error is received when i transfer the .exe file, bin\Debug folder to another machine:
Unable to find the report in the manifest resources. Please build the project, and try again.
The error is issued when i try to open the form that contain the Crystal report viewer, I already checked the properties of the report file and it says "Embed Resource" in the "Build Action"
This error is not visible on my development machine where visual studio is installed, anybody know what i should install on the other machine for this to run.
I'm using C#, WinForms, .net 2.0, VS 2005.

Fronde Systems Group:
Setting the build action to Embedded resource is working
in my local machine which has Visual studio 2003 installed. But when i deploy the same on Server
(server has no .net framework installed on it), it keeps failing. I get the the following error:
"ERROR Thrown from Crystal Reports ===> An undocumented error occured" which is triggered when it is Unable
to find the report in the manifest resources.
Please suggest me guys....
Thanks
Ravi
[email protected]

CRVS2010 Beta - Unable to find the report in the manifest resources

I upgraded to VS2010 Beta where we soon encountered this error.
Unable to find the report in the manifest resources. Please build the project, and try again.
at CrystalDecisions.CrystalReports.Engine.EngineExceptionUtils.DoThrowException(String message, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ExceptionThrower.ThrowEngineException(String messageID, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(IEnumerable enumerable)
Searching the forums I saw some similar issues. Here is how the issue was solved on my end.
Looking at the properties of the crystal report file in VS2010 the Build Action was "None". After setting it compile things worked as normal. The exception made sense after finding the cause.
I'm not sure if this was caused by VS2010 as my organization was in the middle of migrating to TFS 2010 that may have caused an issue.
Hope this helps someone.

Cliff, thank you very much for sharing this soution with the community. Once CRVS2010 RTMs, I'll create a KBase on it.
Happy coding,
Ludek

What happens to the report if the underlying stored procedure to execute the report take atleast 3 hrs to run

Hi,
I have a report which is calling a stored procedure..
Stored procedure exceutes 4-5 stored procedure and then returns the count each procedure it ran using union all statement... The stored procedure takes around 3-4 hrs to run because it is looking at quarterly data and YTD data.
So once the report is kicked off and the procedure behind it runs and runs how will communicate to the report to show the final data... the final data will just be 5 rows with counts.
I think we are running into a issue where the stored procedure runs and runs and then the report goes into la la land and has no clue what to do...
Can you please shed some light on this..
Thanks
Karen

Hi Karen,
When we render a report, the report would process the following procedures:
Open connections to data source and reading data rows from data extensions for all datasets, means retrieve data. Then process the engine requests, including the tablix, grouping, sorting, filtering, aggregations and subreport processing, means process report.
Finally, render the report, including the pagination modules and on-demand expression evaluations.
So the report rending has to wait until the stored procedure is executed. To improve the performance, we can consider the three aspects:
Improve the performance of the stored procedures. Such as index and join. For better support, I suggest you can post a new thread about this issue in Transact-SQL forum at:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql. It is appropriate and more experts will assist you.
Simplify the report. For example, avoid including a reference to [&TotalPages] or any complex expressions in the page header and page footer. For more details, please see the following document:
http://technet.microsoft.com/en-us/library/bb522806(v=sql.105).aspx
Using cashing if you have a long-running query that cannot be tuned further. For more details, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms159241(v=sql.110).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Show the report on the same dashborad page with the folder tree?

I add a folder in dashboard, and put it on the left.
now i open the folder tree in dashboard, and click a report,
but biee open the report on a new page.
I want to show the report on the same page with the folder,
maybe show the report on the right in the dashboard with the folder.
how could it be done?
thanks ,
newkoa

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

Documentaion for the report in the ALV display

Similar Messages

Maybe you are looking for