Regarding Forms Developer6i for Windows NT

Hello ,
I had made one application in Oracle Forms 6i.
My problem is when more than 5 user tries to add record in same
table then we couln't found MAX of that record. i.e Max
(primary_col) of that table.
I tried with sequence , but when record is not saved then that
serial no can't be rollback.
Please suggest some differnt method to solve this query
Regards,
Sandeep Kumar

Hi,
Instead of using sequence, I suggest you to generate sequence in
PRE-INSERT trigger of the block.
Regards
Syed

Similar Messages

When I unzip Forms 6i for Windows.zip I get "bad CRC" in several files

Oracle Forms Developer/Services 6i Release 2 for Windows 98/NT/2000/XP
http://download.oracle.com/otn/nt/forms/6i_rel2_xp.zip
When can I get a copy of this without errors?
Thanks.

Hi,
(CRC- Cyclic Redundancy check if you get CRC error it means your zip file is corrupt) I also download 6i from same location and it works fine are u using any download manager for downloads.

How to download oracle forms 6i for windows server 2003 or linux

hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?
thanks a lot.
Edited by: elcaro on Jan 18, 2013 7:43 AM

elcaro wrote:
hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.What is the complete error message?
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?Did you try this file? -- http://download.oracle.com/otn/nt/forms/6i_rel2_xp.zip
You may log a SR if this does not work.
Thanks,
Hussein

Downloading Oracle 6i Forms & Reports for Windows Me edition

Can any one tell me from where can I download these tools?
Is there a specific edition for Windows Me?
Thanks in Advance,
Arun.

[http://www.oracle.com/technology/software/products/forms/index.html]

Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
to here that as well.
Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
THAT would also work incredibly well as I am much more familiar with Matlab.
I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
Thanks in advance for any advice you can give me!

Hi Jicnon,
Thank you for posting in MSND forum.
Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
,maybe you will get better support.
In addition, I find a similar thread about your issue, maybe you will get some useful message.
https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Doubt regarding facebook integration for windows phone 8.1 silverlight app?

Hi,
I am developing a windows phone 8.1 silverlight application . For my application I integrated the facebook login. For this facebook integration I used the login with facebook app method.
My doubt is after getting the app id from the dev center , I updated the appid at developers.facebook.com , wmmanifest.xml (In extensions protocol (msft-appid without dashes)) . Or do I need to change the product id in the place holder also , I tried to
change the productid also but I am getting error like some signature is wrong try with different signature. I am confused how to do it .
Any help,
Thanks...
Suresh.M

Hi Suresh,
According to your description, I assume you want to complete facebook configuration in windows phone silverlight app. Please refer to the following link to see how.
http://facebooksdk.net/docs/phone/config/.
You can find code sample from
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/tree/master/Samples.
Facebook API is third-party library and it is our of our support range. You can post questions on here.
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/issues.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Forms Developer for Windows 2000

I have installed Oracle 9iAS on Windows 2000 OS. Now I want to install Forms & Reports Developer 6i on the same server to develope few forms & reports and finally I want to deploy it on Portal.
My question is, should I go ahead with installation of Forms & Reports ? Will it demage my current setup ? I don't want to disturb my running Oracle Database , 9iAS. Any suggestion ?
Thanks,
Vipul

Hari,
check this link
http://otn.oracle.com/software/htdocs/devlic.html?/software/products/forms/htdocs/winsoft.html
You get to it through otn.oracle.com/products/forms --> Software link
Frank

Installing forms 6 for Windows 98

When I try to install forms 6 I get the following error message :-
ORAINST caused an invalid page fault in
module KERNEL32.DLL at 0177:bff76723.
Registers:
EAX=00000000 CS=0177 EIP=bff76723 EFLGS=00010212
EBX=00000000 SS=017f ESP=0054ffbc EBP=0055008c
ECX=005500a4 DS=017f ESI=81689564 FS=4e07
EDX=005503f0 ES=017f EDI=00550128 GS=0000
Bytes at CS:EIP:
ff 75 fc 9d 57 8d bd 30 ff ff ff 6a 04 55 57 e8
Stack dump:
Please Help - URGENT

Hi,
I would strongly advice against using Forms or Reports
on Windows 98. Preferred platforms are NT 4 or Windows 2000.
On windows 95 it should work OK. I've tried on 98
but it did never work.
Brgds,
Charles
When I try to install forms 6 I get the following error message :-
ORAINST caused an invalid page fault in
module KERNEL32.DLL at 0177:bff76723.
Registers:
EAX=00000000 CS=0177 EIP=bff76723 EFLGS=00010212
EBX=00000000 SS=017f ESP=0054ffbc EBP=0055008c
ECX=005500a4 DS=017f ESI=81689564 FS=4e07
EDX=005503f0 ES=017f EDI=00550128 GS=0000
Bytes at CS:EIP:
ff 75 fc 9d 57 8d bd 30 ff ff ff 6a 04 55 57 e8
Stack dump:
Please Help - URGENT

Forms & Reports 6i Release 2 for Windows

I am trying to install forms 6i for windows.I have windows XP home edition and I have installed Oracle 9i Enterprise edition.
I am getting this message:"Orainst.exe has encountered a problem and needs to close"
Cold somebody out there help me.
Thank you.
Jhon

I believe (from looking at related bugs) this is as the error messahe says. You need (possibly) admin privs to do the installation.
That could be your problem.
Regards
Grant Ronald
Forms Product Management

Download forms and reports 6i for Windows XP

hi guys,
I have just installed Windows XP, then I installed the Forms 6i, but I can't connect to the Oracle 9i DB,
the Net Easy Config is OK, Easy Config can test the connectioin successfully.
I try to download the latest Form 6i from the download sites, but I can only find Linux, Unix, NT version.
I am wondering are there any Forms 6i for Windows XP or 98, or just not let us download them ???

yes

Jabber for Windows - Outlook Meeting integration issue/questions

Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
Mal

Hi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

FM Radio Application for Windows 8

I am trying to develop a simple FM Radio Application for Windows 8 phones. I found one class but it says it will not work for devices targeting windows 8. Can some one please help.
https://msdn.microsoft.com/en-us/library/windows/apps/microsoft.devices.radio.fmradio(v=vs.105).aspx

It's been a long time since I last answered an FM radio question so I might be forgetting some details but basically...
In Windows Phone 7 timeframe the FM radio hardware was part of the requirements but for Windows Phone 8 FM radio hardware was optional and, in fact, the FM Radio drivers were not available until build 8.0.10322.
I cannot recall if the restriction regarding FMRadio API for Windows Phone 8 targeted applications mentioned in the MSDN documentation, is enforced during submission to the store but I know it is possible to use the APIs in a Windows Phone 8 targeted project
during development (...requires: ID_CAP_MEDIALIB_AUDIO I believe.)
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

I want Forms 6i for download

Hello Folks,
We are on Oracle 11.5.10.2 with Forms 6i - 6.0.8.25.2
I cannot download this from Oracle software download site. I can get only the 10g version.
We want to develop custom forms, hence we need a client (Windows) version of Oracle Forms 6i builder - 6.0.8.25.2
What is the best way to get this software for download ?
-Thanks
Srinivas

Hi! Welcome to the Forums. You can still download Oracle Forms 6i, you just need to know the direct URL. Give this a try: Oracle Forms Developer for Windows.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

Satellite P100-239 - Sound driver for Windows 7

Hello,
I need some support for installing audio driver for my Satellite P100-239. I tried different things but noone works. So I'm searching for a mate who give me a solution to fix my sound prob. I am sure it is a conneax hd audio.
I cant flash bios with BD1_BIOS(V4.80)_Update (is it possible for installing soundcard?)
THx for any help

Hi Salomon82,
I founded a similar thread regarding sound drivers for Windows 7 on Satellite P100:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=191495&#191495
It seems that the Vista driver also work on Windows 7! :)
Furthermore its not necessary to update the BIOS for installing sound card drivers because firstly you should try the correct driver.

Regarding Forms Developer6i for Windows NT

Similar Messages

Maybe you are looking for