Regarding multiple tables
How can we retrieve data from multiple tables into a single screen? Is it possible?
Rgds, Jona
Hi Rona,
If you just want to show the data you can use the datatable query with the grid.
Regards
Ad
Similar Messages
-
"Failed to open the connection" problem related to multiple tables in the report?
Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
Dim o As Object = Session("ReportParams")
Dim ReportURL As String = ""
'Verify that there is a ReportParameters object
If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
Response.Redirect("/errors/MissingReport.aspx")
End If
ReportParams = CType(o, ReportParameters)
'Verify that the report exists
ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
ReportPath = Server.MapPath(ReportURL)
If Not File.Exists(ReportPath) Then
Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
End If
InitializeReport()
End Sub
Protected Sub InitializeReport()
Dim RD As New ReportDocument
Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
RD.Load(ReportPath)
If ReportParams.SelectString <> "" Then
Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
Dim DS As New Data.DataSet
Adapt.Fill(DS)
RD.SetDataSource(DS.Tables(0))
End If
For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
Dim FFD As FormulaFieldDefinition = Nothing
Try
FFD = RD.DataDefinition.FormulaFields(kvp.Key)
Catch ex As Exception
'Do nothing
End Try
If FFD IsNot Nothing Then
Select Case FFD.ValueType
Case FieldValueType.DateField, FieldValueType.DateTimeField
If IsDate(kvp.Value) Then
FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
Else
FFD.Text = "Date(1960, 01, 01)"
End If
Case FieldValueType.StringField
FFD.Text = String.Format("""""", kvp.Value)
Case Else
'For now, treat these as if they were strings. If things blow up here,
'we will need to add the appropriate formatting for the field type.
FFD.Text = String.Format("""""", kvp.Value)
End Select
End If
Next
For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
Dim TLI As TableLogOnInfo = T.LogOnInfo
TLI.ConnectionInfo = CI
T.ApplyLogOnInfo(TLI)
Next
DisplayedReport.ReportSource = RD
End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team. -
Multiple tables with the possibility of multiple records in each table
Post Author: viper
CA Forum: .NET
Hi
I have been trying for a few days now to come up with a CR solution to displaying data from multiple tables. These tables, in some cases, have more then one record that needs to be displayed. This is basically what I am trying to do.....
I am developing a .net web application(vb) using vs2005 and an oracle 10g backend. There is a data entry part of the site that users will enter data related to a property. Other users will be able to search these records and have a list of records returned based on the search criteria. The user then can click on one of these records to view a pop up CR report containing all the data related to that one property. The PropID is passed to the pop up page and is used in the WHERE clause of my SQL statement to bring back only one property. This data can come from as many as 18 tables if all the fields have been entered for this property. I have tried many different solutions to get the data from multiple tables...and have had some that were close to what I need. The best one I have will display data from multiple tables but only one record per table.....which doesn't work in my case since some of the tables have more then one record per table.
Is there anybody that has had success in setting up similar reports?
Does anybody know how I could use the "Group Expert" to group by the tables in my application? I can only figure out how to group within a single table.
It would be great if I could group by table....then just display the record(s) in each table that had the same PropID. I am not sure if the pdf export would show all the data in that situation but it would be worth a try. If fact...maybe I could create a new table called MyTables and just add two colums like MyTableID and MyTableName. Then add all the table names to MyTables that I want to see in the report and add the associated MyTableID value to each table as a new column. I could then group by MyTableID and PropID. Just guessing here.
Any ideas would be appreciated.Post Author: quafto
CA Forum: .NET
Your query is not too clear so I'll do my best to answer it broadly.
You mentioned that you have a .NET web application where your users enter data on one screen and then may retrieve it on another. If the data is written in real time to a database then you can create a standard Crystal Report by adding multiple tables. The tables should be linked together using the primary and foreign keys in order to optimize the database query and give you a speedy report. Using unlinked tables is not recommended and requires the report engine to index the tables (it is quite slow).
You also mentioned you have a "PropID" to be used in a WHERE clause. This is a great place to use a parameter in your report. This parameter can then be used in your record selection formula inside Crystal Reports. The report engine will actually create the WHERE clause for you based on the parameter value. This is helpful because it allows you to simply concentrate on your code rather than keeping track of SQL queries.
Now, what Crystal does not do well with is uncertainty. When you design a report with X number of tables the report engine expects X number of tables to be available at processing time. You should not surprise the print engine with more or less tables because you could end up with processing errors or incorrect data. You may need to design multiple reports for specific circumstances.
Regarding the group expert question. I'm not sure how you would/could use the group expert to group a table? A table is a collection of fields and cannot be compared to another table without a complex algorithm. The group expert is used to group and sort records based on a field in the report. Have a look at the group expert section of the help file for more information.
Hopefully my comments have given you a few ideas. -
How to drop multiple tables in one statement
I could used to run the below syntax to drop multiple tables in MS SQL, but it doesn't work in Oracle seems like, I am using free Oracle SQL Developer. Not a big deal but wanna know if this can be done. Thanks,
DROP TABLE A, B, C, D, FI'm not so sure in 1 select statement is it possible or not but you can try to use in this manner to see what happens ->
drop table &tab;
Enter value for tab: A
Table A Successfully dropped.
Enter value for tab: B
Table B Successfully dropped.Regards.
Satyaki De. -
Export to Excel - Multiple Tables in a single details section
Hi All,
I have a set of reports where I am using a single details section to show multiple tables stacked over one another. That is, i have a table with three columns and two rows, followed by some white space and then another table with 4 columns and 1 row, followed by white space and then other tables.
When I export it to excel, I am getting the data but the ordering is in a reverse pivoted fashion:
Excel output:
CR_column1_Heading CR_Column2_Heading CR_Column1_Data CR_Column2_Data
Is there a way to control the sequence of fields displayed in excel while exporting?
Thanks.
- Atif.@Carl,
It is printing like this.
HEADER1 HEADER2 HEADER3 DATA 1 DATA 2 DATA 3
I am getting all the columns and fields in excel, that is not a problem. However, the problem is whether i can control the order the fields are printed onto Excel.
Like what Ben is commenting:
HEADER1 DATA 1 HEADER2 DATA 2 HEADER3 DATA 3
However, I dont want to reorder the fields on the canvas as the format layout is predefined.
I tried searching through the Cystal SDK if there is a finer level of control but to no avail.
A work around under the above constraints would be simply amazing!
Thanks again and appreciate your response.
Regards,
Atif. -
Move data from multiple Tables to a Single Table & Convert the list to ALV.
Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
matnr type marc-matnr,
maktx type makt-maktx,
DISPO type marc-DISPO,
MINBE type marc-MINBE,
LABST type mard-LABST,
end of i_final.
DATA: Begin of i_marc occurs 0,
matnr type marc-matnr,
DISPO type marc-DISPO,
MINBE type marc-MINBE,
end of i_marc.
DATA: Begin of i_makt occurs 0,
matnr type makt-matnr,
maktx type makt-maktx,
end of i_makt.
DATA: Begin of i_mard occurs 0,
matnr type mard-matnr,
LABST type mard-LABST,
LGORT TYPE MARD-LGORT,
end of i_mard.
SELECT matnr
dispo
minbe from marc
into corresponding fields of table i_marc
where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
75 'MRP',
80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
75 i_marc-dispo,
80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
MAKTX from makt
into corresponding fields of table i_makt
for all entries in i_marc
where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
30 i_makt-maktx.
ENDLOOP.
SELECT matnr
LGORT
LABST from mard
into corresponding fields of table i_mard
for all entries in i_marc
where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
30 I_MARD-LGORT,
40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
30 i_final-maktx,
75 i_final-dispo,
80 i_final-minbe,
105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
30 i_makt-maktx,
75 i_marc-dispo,
80 i_marc-minbe,
105 i_mard-labst.
*ENDLOOP.
Regards,
VishalChange like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
WRITE: /10 i_mard-matnr,
30 i_mard-lgort,
40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
MOVE i_mard-matnr TO i_final-matnr.
MOVE i_marc-dispo TO i_final-dispo.
MOVE i_marc-minbe TO i_final-minbe.
MOVE i_makt-maktx TO i_final-maktx.
MOVE i_mard-labst TO i_final-labst.
APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'. -
How to extract data from multiple tables (always got errors)
Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
PratThanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat -
SQL Loader : Loading multiple tables using same ctl file
Hi ,
We tried loading multiple tables using the same ctl file but the data was not loaded and no errors were thrown.
The ctl file content is summarised below :
LOAD DATA
APPEND INTO TABLE TABLE_ONE
when record_type ='EVENT'
TRAILING NULLCOLS
record_type char TERMINATED BY ',' ,
EVENT_SOURCE_FIELD CHAR TERMINATED BY ',' ENCLOSED BY '"',
EVENT_DATE DATE "YYYY-MM-DD HH24:MI:SS" TERMINATED BY ',' ENCLOSED BY '"',
EVENT_COST INTEGER EXTERNAL TERMINATED BY ',' ENCLOSED BY '"',
EVENT_ATTRIB_1 CHAR TERMINATED BY ',' ENCLOSED BY '"',
VAT_STATUS INTEGER EXTERNAL TERMINATED BY ',' ENCLOSED BY '"',
ACCOUNT_REFERENCE CONSTANT 'XXX',
bill_date "to_date('02-'||to_char(sysdate,'mm-yyyy'),'dd-mm-yyyy')",
data_date "trunc(sysdate)",
load_date_time "sysdate"
INTO TABLE TABLE_TWO
when record_type ='BILLSUMMARYRECORD'
TRAILING NULLCOLS
RECORD_TYPE char TERMINATED BY ',' ,
NET_TOTAL INTEGER EXTERNAL TERMINATED BY ',' ENCLOSED BY '"',
LOAD_DATE_TIME "sysdate"
INTO TABLE BILL_BKP_ADJUSTMENTS
when record_type ='ADJUSTMENTS'
TRAILING NULLCOLS
RECORD_TYPE char TERMINATED BY ',' ,
ADJUSTMENT_NAME CHAR TERMINATED BY ',' ENCLOSED BY '"',
LOAD_DATE_TIME "sysdate"
INTO TABLE BILL_BKP_CUSTOMERRECORD
when record_type ='CUSTOMERRECORD'
TRAILING NULLCOLS
RECORD_TYPE char TERMINATED BY ',' ,
GENEVA_CUSTOMER_REF CHAR TERMINATED BY ',' ENCLOSED BY '"',
LOAD_DATE_TIME "sysdate"
INTO TABLE TABLE_THREE
when record_type ='PRODUCTCHARGE'
TRAILING NULLCOLS
RECORD_TYPE char TERMINATED BY ',' ,
PROD_ATTRIB_1_CHRG_DESC CHAR TERMINATED BY ',' ENCLOSED BY '"',
LOAD_DATE_TIME "sysdate"
Has anyone faced similar errors or are we going wrong somewhere ?
Regards,
SandipanThis is the info on the discard in the log file :
Record 1: Discarded - failed all WHEN clauses.
Record 638864: Discarded - failed all WHEN clauses.
While some of the records were loaded for one table.
Regards,
Sandipan -
Can we use single DB Adapter for multiple tables
Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharmaHi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads, -
User Datastore for multiple tables and columns!
Hi,
I hop so much, someone can help me.
I've made a user datastore to index multiple columns of multiple tables.
Now, the Documentation of Oracle explains the idexing of one table.
I have multiple tables, which have all, the columns descr and tagnr. I want to make a query sth like this:
select table1.column, table2.columnd... where contains(indexed field,'gas within descr',1)>0
is it possible to index 4 seperate tables, without having a collective key? I dont want to make a Concatenated Datastore.
I have wrote this code.
But it doesn't work. It's been compiled fine. But I don't get any result with my queries.
create or replace
procedure My_Proc_Wide
Must be in ctxsys schema.
In a full-scale example, this would be a wrapper
for a proc in the user schema.
rid in rowid,
tlob in out NOCOPY clob /* NOCOPY instructs Oracle to pass
this argument as fast as possible */
is
v_descr varchar2(80);
v_tagnr varchar2(30);
v_descr_name constant varchar2(20) := 'descr';
v_descr_start_tag constant varchar2(20) := '<' || v_descr_name || '>';
v_descr_end_tag constant varchar2(20) := '</' || v_descr_name || '>';
v_tagnr_name constant varchar2(20) := 'tagnr';
v_tagnr_start_tag constant varchar2(20) := '<' || v_tagnr_name || '>';
v_tagnr_end_tag constant varchar2(20) := '</' || v_tagnr_name || '>';
v_buffer varchar2(4000);
v_length integer;
begin
/* verify the env which called this */
if Dbms_Lob.Istemporary ( tlob ) <> 1
then
raise_application_error ( -20000,
'"IN OUT" tlob isn''t temporary' );
end if;
/* the real logic */
/* first tabel to be indexed */
select t1.tagnr, t1.descr
into v_tagnr, v_descr
from tweb.pdp_positions t1
where t1.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
v_descr ||
v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* second table to be indexed */
select t2.tagnr, t2.descr
into v_tagnr, v_descr
from tweb.pdp_schema_equ t2
where t2.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
v_descr ||
v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/*third table to be indexed */
select t3.tagnr, t3.descr
into v_tagnr, v_descr
from tweb.pdp_equipment t3
where t3.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
v_descr ||
v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* fourth table to be indexed */
select t4.tagnr, t4.descr
into v_tagnr, v_descr
from tweb.pdp_Projcode t4
where t4.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
v_descr ||
v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
end My_Proc_Wide;
what have I to do, to make this work?
Any Help would be appriciated!!
Kind Regards,
ArsinehArsineh,
I realise that it has been quite some time since you posted this question but I thought I'd reply just in case you never did manage to get your user datastore working.
The reason your procedure will not work is simple. A user datastore procedure accepts a rowid input parameter. The rowid is the ID of the row that Oracle Text is currently trying to index. In the example you have given, you are attempting to use the supplied rowid as the primary key for multiple tables, this will simply never work as the rowid's across multiple tables will never correspond.
The best way to achieve your goal is to create the index on a master table which contains the common primary keys for each of your four tables e.g.
MASTER_TABLE
COL:COMMON_KEY (NUMBER(n))
COL:USER_INDEX_COLUMN (VARCHAR2(1))
If you create the user datastore index on the MASTER_TABLE.USER_UNDEX_COLUMN column your stored proc simply needs to read the correct row from the MASTER_TABLE (SELECT t.common_key into v_CommonKey FROM master_table t WHERE t.rowid = rid) and issue subsequent queries to extract the relavant data from the t1..t4 tables using the common key e.g.
SELECT t1.tagnr, t1.descr into v_tagnr, v_descr FROM t1 WHERE t1.[PRIMARY_KEY_FIELD] = v_CommonKey;
SELECT t2.tagnr, t2.descr into v_tagnr, v_descr FROM t2 WHERE t2.[PRIMARY_KEY_FIELD] = v_CommonKey;
and so on...
Hope this helps
Dean -
Crystal Reports and connecting to multiple tables in a dataset - I'm Going Crazy!!
This is my first application, first report and first everything. Wouldn't you know the report I am trying to produce is probably more difficult!! What is happening is that I have a form(screen) up in my application with the information displayed on it from a recrod in a table that I want to put on a report to be view and/or printed and eventually down the road I want to incorporate a signature. One step at a time though, here is what I have accomplished. I have created the report, I have gotten it to display in the viewer but it will not push the data from the table that I want displayed. It only displays the text that I have typed on the form. This is a Visual Basic application created in Visual Studio 2005 using a SQL database. If you need more information then just ask and I will try to fumble through and tell you what I know. (Oh and to top it off............I am also trying to get information to display from other tables also (codes connected to descriptions etc.))
Any help would be really appreciated as I have went through tutorials, read white papers, tech notes and anything else I can find but I just can't get it to work!!
Thanks!You do need to give more information. To better help, we would need to know the database, when you say SQL do you mean SQL Server, how you created the dataset, whether there are multiple tables in a single dataset or multiple datasets, etc.
The report appears to be running so the underlying issue as you know will likely be the dataset. You may want to confirm the dataset does in fact have data in it. Returning a simple count will let you know there are rows. If you used the components rather than code to create the objects you can also see the data returned in the fill process.
Once you know you have data in the dataset, you can check your reports connection to the dataset.
Just hang in there... the problem is probably a simple fix. I am sure others will follow on with more suggestions.
Regards,
John W. -
JDBC-XI-FILE scenario. How to extract data from multiple tables
Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
KumarHi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke -
Best way to import data to multiple tables in oracle d.b from sql server
HI All am newbie to Oracle,
What is the Best way to import data to multiple tables in Oracle Data base from sql server?
1)linked server?
2)ssis ?
If possible share me the query to done this task using Linked server?
Regards,
KoteRavindra.check:
http://www.mssqltips.com/sqlservertip/2011/export-sql-server-data-to-oracle-using-ssis/
koteravindra
Handle: koteravindra
Status Level: Newbie
Registered: Jan 9, 2013
Total Posts: 4
Total Questions: 3 (3 unresolved)
why so many unresolved questions? Remember to close your threads marking them as answered. -
ALV for fields from multiple tables and make them editable
Hi,
I am working on a forecasting report. We have created few custom table e.g. store forcaset detail for whole year month wise. tables are say sales data, budget data, forcast data etc.
Now i need to make a report based on monthwise based on above mention table.
eg.o/p looks like:
column name type desc monthapr monthmay .......
table forcast Qty sales 100 150
table budget/sales amt amou 20.50 130.50
table sales vs forcast amt amount 3000 50000
-Now i don't know how to display data from multiple table in single ALV list that to with different field type.
-2nd issue is i need to make only perticuler row editable so that user can chage data.
-3rd when user change data and press calulate button - it should calculate data for future month - i got formula for that and disply the calulated data.
- 4th if user like the forcast data then when press save - change data should update dbtable.
Is this all possible with simple abap FM Or need to use ABAPOO.
I will appericiate all expert help.
Many thanks in advance.
KDE.
Edited by: kde_test on Jun 4, 2010 5:44 PMHi,
Solutions :
1. You can use FM REUSE_ALV_HIERSEQ_LIST_DISPLAY as guided by Ashutosh.
You can also check out this
[http://www.sap technical.com/Tutorials/ABAP/3DGraph/demo.htm] change link to saptechnical without space
2. [How to make certain rows in ALV grid editable...;
3 & 4. Use two importing paramaters 'PF_STATUS_SET' 'USER_COMMAND' of REUSE_ALV_GRID_DISPLAY.
create two function codes 'CALC and 'SAVE' in pf-status and provide your required functionality to these function codes using User-Command.
Sorry am unable to provide you with supporting code, but you can search for it and It can solve your problem
Regards,
Rohit -
How to update flag in multiple tables using custom sql DB adapter
hi all,
I have a scenario: I want to update flags in multiple tables in DB2. I have used toplink update only to update all tabless after creating relationships between them. But that approach is not working as it couldnot detect emmisions with DB2 and update the complete record with blank values in other columns.
So, i want to use custom sql now. Can anybody help in resolving the issue or in writing the custom sql.
Regards
RichaDear SeánMacGC thanks for reply,
But "a.changed" is not a field in GNMT_CUSTOMER_MASTER_CHG. what i am doing in this procedure is i am collecting bulck data and validating field by field from GNMT_CUSTOMER_MASTER_CHG with GNMT_CUSTOMER_MASTER table as their structure is same.. if v_name is not same as v_name_chg then i am setting changed flag to "Y" changed is "changed dbms_sql.varchar2_table" and updating GNMT_CUSTOMER_MASTER in bluck where changed flag ='Y'...
type custRec is record
n_cust_ref_no dbms_sql.number_table,
v_name dbms_sql.varchar2_table,
v_name_chg dbms_sql.varchar2_table,
rowid rowidArray,
*changed dbms_sql.varchar2_table*
i cannot use simple SQL as i need to validate field for each records with GNMT_CUSTOMER_MASTER_CHG and insert into log file as well.....
to run this procedure:
execute DO_DC_NAME_UPDATE_OTHER_TAB.DO_NAME_UPDATE_OTHER_TAB;
Thanks...
Maybe you are looking for
-
When I try to create an appointment that occurs for more than a day it appears on my calendar for the entire day and not the time that I want. Example: create an appointment on Monday, Wednesday and Friday for 12-1pm and goes for two weeks. I just w
-
Possible max no. of events in alv
Hi is there any maximum no of events possible in ALV reporting. i.e. what is the maximum no of events of alv possible in one program.
-
How to download a real setup for Adobe Reader 9?
I have a friend who lives in the Sticks (and I do mean the back woods sticks) where she only has a 24.4 KBPS Modem connection to the internet. I voluntered to download some updated software and I cannot figure out how to download the Windows 2000 ve
-
I am using server and clients machines in my office, here i want to open browsers in all systems simultaneously but i am unable open the browser, when i am trying to open the browser in the second machine it says that firefox is already open... pls.
-
Hello Guru's!I want to join the XI. I want to know the topics on XI to be learn. So i request you to send the details of the course contents. My mail id is [email protected] Plz send me to this id!