Regarding Overflow segments in IOT
can any one please tell me what will be contents of the overflow segments in an IOT.
documentation says
An OVERFLOW clause, which preserves dense clustering of the B-tree index by storing the row column values exceeding a specified threshold in a separate overflow data segment. This data segment can be in another tablespace also.
An OVERFLOW clause, which preserves dense clustering of the B-tree index by enabling the storage of some of the nonkey columns in a separate overflow data segment.
during the insert operations if the data extent threshold limit is reached it alloates a overflow segment right..
in the documentation it also says that non key columns in the table are also stored in the overflow segments.
CAN ANY ONE TELL ME WHAT WILL BE THE CONTENTS OF INDEX SEGMENTS AND OVERFLOW SEGMENTS FOR THE FOLLOWING TABLE.
CREATE TABLE admin_docindex2(
token CHAR(20),
doc_id NUMBER,
token_frequency NUMBER,
token_offsets VARCHAR2(512),
CONSTRAINT pk_admin_docindex2 PRIMARY KEY (token, doc_id))
ORGANIZATION INDEX
TABLESPACE admin_tbs
PCTTHRESHOLD 20
INCLUDING token_frequency
OVERFLOW TABLESPACE admin_tbs2;
The contents of the oveflow segment will be all columns defined after the including token_frequency column, in your case the token_offsets column.
As definitions for all the remaining columns within the index structure are relatively small, the pctthreashold value of 20% is not likely to come into play.
Cheers
Richard Foote
http://richardfoote.wordpress.com/
Similar Messages
-
How to specify overflow clause for IOT
Hi,
I’m using OSDM v3.0.0.665
How do I specify ‘overflow’ clause for index organized table (IOT)?
I need to generate DDL something similar to this “ create table T1(…….) organization index..overflow".
In OSDM, when I open physical model and table properties ‘IOT properties’ tab, I can see dropbox for overflow segment but no values in drop box, it is blank.
I do have tablespace created in my physical model.
I’m able to generate DDL for IOT but does not have ‘overflow’ clause.
Thanks,
VikasDavid,
Thanks for your response.
After creating segment template, I’m able to generate overflow clause.
However I’m still not able to specify tablespace for both – IOT table and overflow segment.
If I specify tablespace for IOT (say T1) under ‘General’ tab and if I also specify overflow segment (with tablespace T2) under ‘IOT properties’ tab, I’d expect it to generate DDL with tablespace T1 for IOT and tablespace T2 for overflow.
However it generates DDL with overflow tablespace T1 and does not generate any tablespace clause for IOT. So, IOT is created in default tablespace for user.
I need DDL with tablespace clause for both – IOT as well as overflow segment.
Can you please help?
Also, how do I get rid of other storage clauses like PCTFREE, PCTUSED, MINEXTENTS, MAXEXTENTS etc..
Thanks,
Vikas -
Help regarding :Video Segmentation & Summerization
hello friends,
I am doing my project on above topic and I am trying it with Java.
Is it possible doing it in Java.
What Techniques I'm using are:
1.Java(JMF)
2.Oracle 9i(Inter-Media)
3.Matlab
This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)
Is It possible in Java? How?
Seeking for help regarding this .
Thank you.This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)So, compressing that into a simple question instead of a convoluted one... you just want to remove duplicate frames from a video and save it to file? -
Hi,
I have created a new segment ZDH_HAZMAT for hazardous materials for the idoc type ZDH_ORDERS and released it for purchase order. Actually modifying the segment data for already existing Idoc segments (E1EDP01) is possible and i have done it using user exit MM06E001. When a new segment (ZDH_HAZMAT) is added, it's showing a syntax error . Waiting for earliest reply.
Thank you.Hello,
You must keep a an IF condition like this in selection program's user exit.
if Segmetn-Name eq <New segmetn>
break <user name>
end.
It must stop other wise the enhancing the standard Idoc type is wrong. And so you need to check whether it is activate / released the new segment properly.
All the very best for you.
- Mohan Vamsi -
If video contain 50 frames(eg 30 sec),i want convert into 25frames(eg 15 sec) ,with same meaning...
I want to take middle of the frames which i need,Is it possible with Labview.This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)So, compressing that into a simple question instead of a convoluted one... you just want to remove duplicate frames from a video and save it to file? -
Regarding idoc segments modifcation
Hi,
I created a segment zdh_name in we31. Then i released the idoc segment. Also i created a corresponding idoc type and released it and also created a message type .
When an idoc is created for a Purchase order in me21n the segment e1edp01 in idoc should be replaced by my created segment zdh_name with some value.
I have tried using enhancement MM06E001 in the function module exit EXIT_SAPLEINM_002 with the following code.
case int_edidd.
when 'E1EDP01'.
int_edidd-segnam = 'ZDH_NAME'.
int_edidd-sdata = 'DHARUN'.
endcase.
Help me to get the solution.
Thank you.Hi Dharun,
Let us know the exact requirement. As Vinod said, it's not possible to replace a segment in standard idoc/msg type, but you can still add the custom segment by using idoc extention and mentioned exit (by you).
If you want to use custom idoc type, you should copy the FM IDOC_OUTPUT_ORDERS into Z and change according to ur segments and create new out bound process code and attach it to the z FM.
Reddy -
Help me regarding Rollback Segment!! It is Very Very Urgent.
My Oracle Version is 8.1.5.0.0
I have created my Database with one Data File and after creating of the Database I have found that my Database is having one Tablespace and then name is "System" and I have also found that a Rollback Segment is also created by Default on The "System" Tablespace and the name of that Rollback Segment is also "System".
Then what I did, I did create another Tablespace name "HR" with the help of the following syntax:
CREATE TABLESPACE HR
DATAFILE 'E:\MANODATA\U5\HR01.DBF' SIZE 100M
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K;
Then I tried to create a Rollback segment on the "HR" with the following syntax:
CREATE ROLLBACK SEGMENT HR_RS TABLESPACE HR;
Tablespace is not created but I am getting an error, which I am mentioning below:
Cannot Use System Rollback Segment For Non-System Tablespace 'HR'
Then what I did, I did create another Tablespace name "USERS" with the help of following syntax:
CREATE TABLESPACE USERS
DATAFILE 'E:\MANODATA\U4\USERS01.DBF' SIZE 10M
EXTENT MANAGEMENT DICTIONARY;
Then what I did, I did create a Rollback segment on the Tablespace "USERS" with the following syntax:
CREATE PUBLIC ROLLBACK SEGMENT USERS_RS
TABLESPACE USERS
STORAGE (
INITIAL 50K
NEXT 50K
OPTIMAL 750K
MINEXTENTS 15
MAXEXTENTS 100);
Then what I did, I again tried to create a Rollback segment on the "HR" with the following syntax that you provided:
CREATE ROLLBACK SEGMENT HR_RS TABLESPACE HR;
Now the Rollback Segment is created without any problem.
Now Please tell me why it is so happening. I am very much confused of all this. Can't I create any Rollback Segment on a Locally managed Tablespace unless and until I do not Create a Dictionary managed Tablespace and unless I don't create a Rollback Segment on that dictionary managed Tablespace? Is there any restriction in my Version of Oracle (8.1.5.0.0)?
Please help me in this matter as soon as possible.
Thanking You,
Manojit.My Oracle Version is 8.1.5.0.0
I have created my Database with one Data File and after creating of the Database I have found that my Database is having one Tablespace and then name is "System" and I have also found that a Rollback Segment is also created by Default on The "System" Tablespace and the name of that Rollback Segment is also "System".
Then what I did, I did create another Tablespace name "HR" with the help of the following syntax:
CREATE TABLESPACE HR
DATAFILE 'E:\MANODATA\U5\HR01.DBF' SIZE 100M
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K;
Then I tried to create a Rollback segment on the "HR" with the following syntax:
CREATE ROLLBACK SEGMENT HR_RS TABLESPACE HR;
Tablespace is not created but I am getting an error, which I am mentioning below:
Cannot Use System Rollback Segment For Non-System Tablespace 'HR'
Then what I did, I did create another Tablespace name "USERS" with the help of following syntax:
CREATE TABLESPACE USERS
DATAFILE 'E:\MANODATA\U4\USERS01.DBF' SIZE 10M
EXTENT MANAGEMENT DICTIONARY;
Then what I did, I did create a Rollback segment on the Tablespace "USERS" with the following syntax:
CREATE PUBLIC ROLLBACK SEGMENT USERS_RS
TABLESPACE USERS
STORAGE (
INITIAL 50K
NEXT 50K
OPTIMAL 750K
MINEXTENTS 15
MAXEXTENTS 100);
Then what I did, I again tried to create a Rollback segment on the "HR" with the following syntax that you provided:
CREATE ROLLBACK SEGMENT HR_RS TABLESPACE HR;
Now the Rollback Segment is created without any problem.
Now Please tell me why it is so happening. I am very much confused of all this. Can't I create any Rollback Segment on a Locally managed Tablespace unless and until I do not Create a Dictionary managed Tablespace and unless I don't create a Rollback Segment on that dictionary managed Tablespace? Is there any restriction in my Version of Oracle (8.1.5.0.0)?
Please help me in this matter as soon as possible.
Thanking You,
Manojit. Manojit -
Maybe too late but here goes anyways -
You need to have another SYSTEM Rollback segment before you begin the process you mention above. At this stage of developing your database, the SYSTEM tablespace will keep the one rollback segment for it's own use and you need another one to create rollback info in for other objects. Create another system rollback segment in the existing rollback tablespace, then create a separate rollback tablepace with extent management local, then create some rollback segments. You may even want to use the SET TRANSACTION USER ROLLBACK SEGMENT RBS2 for the creation of the new Rollback Tablespace. Then you can continue with the creation of other objects.
Hope this helps,
the Infamous,
Eric Cartman -
Hi,
We use Acord Standard for XML, I am getting multiple party nodes for the beneficiaries which have common tc code. But number of beneficiaries are unknown at run time transaction.
So we put Overflow Counter at XDD level and used Incovsym rule to implement the section overflow to display the list of beneficiaries in Form which is working pretty well.
But we have a requirement to get the particular instance of Beneficiary for eg., we need Third, Fourth and Fifth beneficiaries in the list of available beneficiaries. Not sure how can we parse the particular instance?
Does any body have any idea ?
Thanks,
SriniIn the field properties under the Rule section, the "Record" member can be set to the occurrence that you want. It is important to note that the record number is added to any overflow symbol or instance you have also defined and associated with the field. So, if you are using an overflow symbol and that is set to 4 and the record count of the field property is set to 3, then you will get the 7th item.
-
How to list all user tables and views?
like "select" command.
Thanks.Hi,
1)
select table_name from user_tables union all select view_name from user_views;
2)
select distinct table_name from user_tab_columns;
3)
select object_name from user_objects where object_type in ('VIEW','TABLE');You should get very similar results with those queries.
Query 2 will contains clusters.
If you run query 3 against sys, you will get some very special objects, like the KOTAD$ table, which contains no user-visible column! You will also get the overflow segments of IOTs and nested table column's storage table.
Kind regards
Laurent -
IOT - PCTTHRESHOLD and OVERFLOW
Hello All:
In the IOT create table statement, we specify pcttreshold and overflow. All the tail end data beyond the pcttreshold will be stored in overflow segment.
In case, if we specify pcttreshold 20 and do not specify the overflow segment, where would the tail end data beyond the 20% pcttreshold be stored?
Thanks
San~Check below.
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:595657388029]
[http://www.oracle.com/technology/products/oracle9i/datasheets/iots/iot_ds.html] -
Hi all,
We have this problem on production, one of the partitioned index organized table throws " invalid rowid" while doing full table scan. After running DBVerify, the corrupted block has been identified and it is related to an index corruption. So it a logical corruption problem, blockrecover won't help here. Index_organized_table(IOT) is not supported by dbms_repair(). What are the options out there to reduce the loss of the data, since the recent two backups already contain this corrupted block. We don't really want to restore back to that far.
version: 10.0.2.3
os: solaris 10
Merry Christmas to you all
Regards,
Will823600 wrote:
Hi all,
We have this problem on production, one of the partitioned index organized table throws " invalid rowid" while doing full table scan. After running DBVerify, the corrupted block has been identified and it is related to an index corruption. So it a logical corruption problem, blockrecover won't help here. Index_organized_table(IOT) is not supported by dbms_repair(). What are the options out there to reduce the loss of the data, since the recent two backups already contain this corrupted block. We don't really want to restore back to that far.
I was a little surprised that you get "invalid rowid" on an IOT (is that ORA-01410 or is it ORA-13412 from Spatial ?) since IOTs don't "do" rowids - but them I remembered overflow segments, so I assume your error must be that the IOT TOP is pointing to an IOT OVERFLOW entry that doesn't exist.
A couple of quick checks - can you exchange the corrupted partition out ? It's probably easier to deal with it as a standalone IOT that as a partition of an partitioned table ?
Can you run a query like 'select max(last column of primary key), count(*) from IOT' - to check that the IOT TOP it self-consistent. Can you hint this to work as an "index "full scan" and as an "index fast full scan" ? (If you have a single column PK, use a column that is guaranteed to be in the TOP rather than the OVERFLOW)
Has Oracle Support suggested querying data with events 10231 (skip corrupted blocks on tablescans) and/or 10233 (skip corrupted blocks on index operaiotns)set ? This may not help as it's possible that the blocks skipped have to be marked as corrupted through dbms_repair (or equivalent) - but it's possible that it will dump the corrupted block into the trace file. (10232 can also cause corrupted blocks to be dumped)
If you can skip the corruption, then 'create new IOT as select from old_IOT' and exchange back in with a small loss of data.
If you can't skip the corruption but can dump the bad block then you can decode the PKs for that block and create a copy as:
"select from IOT where PK < first PK in bad block union all select from IOT where PK > last PK in bad block" - forcing index range scans for both parts of the query.
Regards
Jonathan Lewis -
Too many blocks updated in IOT
Hi All,
Oracle v11.1 on Linux (64 bit).
I have one Index Organized Table, (name) IOT1, with no overflow segment. More than 130M records in there.
There is one primary key (there has to be one as it is IOT), PK_IOT1.
One secondary index on the IOT, I_IOT1_1.
Every day, there are more than 100K inserts in the IOT (sometimes even million).
All data inserted to the IOT is not on one side i.e. data being inserted will not be added to the end of the table, it will be randomly inserted anywhere in the table.
I did ANALYZE INDEX... VALIDATE STRUCTURE on this IOT and I can see
INDEX HEIGHT BLOCKS LF_BLKS LF_ROWS DEL_LF_ROWS
PK_IOT1 4 1056512 1046144 142195933 7943411
I_IOT1_1 4 917504 889681 135094364 1355532In the AWR report generated over a window of 1 day, these 2 indexes appear in the section (Top 5) "Segments by DB Blocks Changes". There are 27,446,880 blocks changes on PK_IOT1 and there are 28,777,264 block changes on I_IOT1_1. The number of blocks changed during 1 day are 25 to 30 times more than total number of blocks in the index !!
Now my questions,
1) What does "Segments by DB Blocks Changes" in AWR report stands for? does that number include the redo and/or undo block changes done for given object?
2) Same block changed multiple times, will be counted i.e. a block changed 3 times, that will up this count by 3. Am I correct ?
3) When data is inserted randomly in IOT, why/how is it different than a normal b*tree index (on heap table) ? or is it not different?
4) When data is randomly inserted in IOT, how is the secondary index affected? specially because there is no real rowid
5) In my case, why the number of blocks updated are many fold the total number of blocks in the the whole index? I know, it is not a one line answer, but I want to get into the details of IOT
Thanks in advanceYou might appreciate Martin Widlake's recent series on IOTs starting here:
http://mwidlake.wordpress.com/2011/07/18/index-organized-tables-the-basics/
Of particular interest with regard to your questions on random insert order might be part 6B which isn't currently linked to from the other articles:
http://mwidlake.wordpress.com/2011/11/10/iot-part-6b-inserts-into-an-iot/ -
How do you move an index organized table? I tried the following:
SQL> alter table WKSYS.SYS_IOT_OVER_27912 move tablespace sysaux;
alter table WKSYS.SYS_IOT_OVER_27912 move tablespace sysaux
ERROR at line 1:
ORA-25191: cannot reference overflow table of an index-organized table
[pre]
Then, after searching for a solution, I tried the following:
[pre]
SQL> alter table WKSYS.SYS_IOT_OVER_27796 move tablespace sysaux overflow tablespace sysaux;
alter table WKSYS.SYS_IOT_OVER_27796 move tablespace sysaux overflow tablespace sysaux
ERROR at line 1:
ORA-01735: invalid ALTER TABLE optionNo luck.
Next question:
Is there a way around this one or should I extract the DDL for the index and recreate it?
SQL> alter index CTXSYS.SYS_IOT_TOP_51146 rebuild tablespace sysaux;
alter index CTXSYS.SYS_IOT_TOP_51146 rebuild tablespace sysaux
ERROR at line 1:
ORA-28650: Primary index on an IOT cannot be rebuiltThanksHi,
The IOT overflow must be moved.
SQL> select table_name from dba_tables
2 where iot_type = 'IOT_OVERFLOW'
3 and tablespace_name = 'TS1';
TABLE_NAME
SYS_IOT_OVER_12214
SQL> select object_name, owner from dba_objects
2where object_id in
3 (select replace(table_name,'SYS_IOT_OVER_')
4 from dba_tables
5 where iot_type = 'IOT_OVERFLOW'
6 and tablespace_name = 'TS1');
OBJECT_NAME OWNER
T1_IOT TEST
SQL> -- Move the overflow segment to another
tablespace.
SQL> alter table t1_iot
2 move
3 overflow tablespace users;
SQL> select table_name, tablespace_name, iot_type
2 from user_tables;
TABLE_NAME TABLESPACE_NAME
IOT_TYPE
SYS_IOT_OVER_12219 USERS
IOT_OVERFLOW
T1_IOT IOT
Hi,
this method didn't work for me
select table_name from dba_tables
where iot_type = 'IOT_OVERFLOW'
and tablespace_name = 'EXAMPLE';
select object_name, owner from dba_objects
where object_id in
(select replace(table_name,'SYS_IOT_OVER_')
from dba_tables
where iot_type = 'IOT_OVERFLOW'
and tablespace_name = 'EXAMPLE');
OBJECT_NAME OWNER
AQ$_ORDERS_QUEUETABLE_G IX
AQ$_STREAMS_QUEUE_TABLE_G IX
SQL> alter table ix.AQ$_ORDERS_QUEUETABLE_G move overflow tablespace users;
alter table ix.AQ$_ORDERS_QUEUETABLE_G move overflow tablespace users
ERROR at line 1:
ORA-08108: may not build or rebuild this type of index online
SQL> alter table ix.AQ$_STREAMS_QUEUE_TABLE_G move overflow tablespace users2;
alter table ix.AQ$_STREAMS_QUEUE_TABLE_G move overflow tablespace users2
ERROR at line 1:
ORA-08108: may not build or rebuild this type of index onlineAny help will be appreciated. -
When start rollback segment not online
hi to all,
i have a one problem regarding rollback segment. i have created a new database & give five rollback segment, but when i start it is offline it will not start as online.
[email protected]
Pradip Mistry,
nullHello Tina,
If the overflow in a DMTS is triggered by a very high value for
NEXT_EXTENT, sometimes you can reduce the NEXT_EXTENT value instead of
extending the tablespace. Of course, the best way is to migrate to Automatic UNDO Management and set retention instead of using rbs, depending on your Oracle version.
If you have access to OSS, please also review OSS note 3155 - Termination due to tablespace overflow, it details the cause and how to avoid that in the future.
You may also review note 3807 for related error messages regarding rollback and undo segments.
Hope this helps, if you found them useful, please do award some points.
Thanks,
George -
Which table is available for profitability segment?
Hi,
I have the G/L account, the Profit center and the customer number.
In which table can I find the profitability segment?
Thank you.
Kind regards,
LindaProfitability segment we can find in CE4XXXX
CE1XXX is for actual line item
CE2XXX is for plan line item
CE3XXX is for Summary record by profit segment
XXXX stands for operating concern
Assign points if useful
Maybe you are looking for
-
Facing Problem while adding Azure Project to existing C# web application
Hi, I have a web application with 5 projects under one Solution. I want to publish this web application on Windows Azure, for that I have tried to add Windows Azure Cloud Service Project but this option is not appear in option list. But when I create
-
Dynamic region column for different user?
Hi experts, I am developing a system for users with different privileges level corresponding to regions(state, city, country). National users could access states data within the nation, state users could access cities data within the state and so on
-
Great news for Novation Remote SL / Automap iPhone users
http://uk.novationmusic.com/news/article=23 At last..! I've checked it out, and it's all there. Now you can access all parameters and plugins. Cheers. Bryan
-
DAQCard6062E hangs intermittently during acq
Code written in VC++ 6.0, NIDAQ 6.9.3, OS: Win2000&98, various laptops from P2-450MHz to P3-1.2GHz. Using SCAN_Start for continuous mode acquisition to a single buffer (16 channels, 20KHz). After a variable number of samples acquired (usually around
-
I normally don't use compressor to export my movies because I know it takes a little bit longer and I'm usually in a rush. I seem to be a bit more organized these days so I thought I'd give compressor another try. Holy Moly!! It has been two days now