Regarding performance widget (performance objects) for custom dashboard
Hi,
I'm making a custom dashboard, I'm trying to use the performance widget for a netapp volume, but the performance objects are not available and only see "(All)" on the options (see screenshot). When I create the dashboard it shows the widget
with empty information.
Thanks for any suggestions.
Hi all,
I managed to fix all my dashboards, from what I understand it is not a supported MS fix as per articles I found on forums etc.
My issues started when I renamed some of my groups because of requirements, think SCOM 2012 doesn't like the rename, serious bug that I think causes the info in the db's to go out of sync etc.
Also found that data from the main opsmgr db to the dwdb hadn't submitted for months, so my reporting was way out. Hence blank stats on dashboards and uptime reports showed grey.
I followed this article and fixed it, please ensure that your db's are fully backed up before doing this. OperationsMananger DB and the OperationsManagerDW db.
The issue in the end is actually with the DW db.
http://operationsmanager2012.blogspot.com/2013/02/scom-availability-report-monitoring.html
Regards
Simon Craner
Similar Messages
-
Error in multiple operation with change document object for custom table
hi all,
I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
why I am getting this error??? is it not possible to do multiple operation with the change document???
kindly help.
Edited by: JaiKarthik on Apr 7, 2010 6:20 AMLOOP AT ts_mod INTO wa_mod.
READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
* Select the existing entries in table Z3RL for change history
SELECT SINGLE * FROM z3rl
INTO wa_z3rl
WHERE vkorg = <wa_tab>+3(4)
AND zzkunnr = <wa_tab>+7(10).
* Move the old entries
IF sy-subrc = 0.
CLEAR ls_z3rl.
ls_z3rl = wa_z3rl.
ENDIF.
* Update the table
MODIFY (viewname) FROM <wa_tab>.
CLEAR wa_z3rl.
wa_z3rl-mandt = <wa_tab>+0(3).
wa_z3rl-vkorg = <wa_tab>+3(4).
wa_z3rl-zzkunnr = <wa_tab>+7(10).
* Populate change tables
CLEAR wa_change.
wa_change-teilobjid = 'Z3RL'.
wa_change-textart = 'TEST_2'.
wa_change-textspr = 'EN'.
wa_change-updkz = 'U'.
APPEND wa_change TO ts_change.
*call the fM to log the values in CDHDR table.
CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
EXPORTING
objectid = 'Z3RL'
tcode = sy-tcode
utime = sy-uzeit
udate = sy-datum
username = sy-uname
planned_change_number = ' '
object_change_indicator = 'U'
planned_or_real_changes = 'U'
no_change_pointers = 'U'
upd_icdtxt_z3rl= 'U'
n_z3rl= wa_z3rl
o_z3rl = ls_z3rl
upd_z3rl= 'U'
lv_opt = ' '
TABLES
icdtxt_z3rl= ts_change.
CLEAR : wa_mod, <wa_tab>.
ENDLOOP.
Edited by: JaiKarthik on Apr 7, 2010 6:49 AM -
Lock object for customer(kunnr) in tcode vf01,vf02,f-28,va01
While using any one of above tcode by using particular customer number(kunnr) ,for same customer other tcode should not allow to access(should be locked)
I agree with nabheet madan, you could look for customer-exit/BAdI or at last implicit Enhancement spot to execute a call of ENQUEUE_EXKNA1 and lock customer record.
You must do that for every dynpro PAI where the customer number can be input (and release previous customer when changed, DEQUEUE_EXKNA1)
Are you sure that requirement is on customer number and not Credit Management ?
Regards,
Raymond -
Creation of system object for customized workflow
Hi Experts,
I am required to define a System Object with system alias, for creation of UWL to trigger Customized work flow's.
What WAS properties and Connection Properties and ITS Properties i should maintain in newly created System Object?
how do create UWL so that it triggers Customized workflow instead of standard workflow in R/3?
I have similarly total 3 Customized workflow so do i need to create three UWL's for each one?
Please help me out!
Regards,
SivaHi Shabir,
I am new to EP can you please let me know how to create custom connector? that triggers three custom developed workflow?
and Please let me know what parameters to pass to create system object(like WAS Properties, ITS Properties etc)
Thanks in advance!
Regards,
Siva -
Customizing replication object for customer group setting
Hi All,
We need to download customer group values & Material Groups values maintained in SD customizing to CRM sales.
Could not able to get customizing object which can be used to download these customizing using R3AS.
Please help.
Thanks & Regards,
Dhanraj Dangetry Tx r3ac1 and r3ac3.
-
Problem finding object for Custom Object Test
I need to create a custom object test that tests whether a an element is present after a record gets inserted into the database. The script is databanked and each iteration needs to insert a databanked record, then evaluate my custom object test to make sure the record was inserted. The trick is in writing the expression that finds the correct custom object. After one iteration, this is the code that finds the custom object;
RSWApp.om.GetElementByPath "window(index=0).link(text=""Category D"" | href=""javascript:OpenModal('DocumentCategoryAddEdit.aspx?documentCategoryId=377','400');"" | index=19)", element
Instead of always grabbing the object whose text is "Category D", I want to grab the object whose text is <<category>> (ie retrieved from a databank file). Search in the href or index isn't helpful because these will change with each iteration through my script.
I tried to modify the GetElementByPath to this:
RSWApp.om.GetElementByPath "window(index=0).link(text=dbValue|)", element
where dbValue is a local parameter that I set earlier on. When I run this, I get an object not found error.
Any ideas?I much prefer to use RSWAPP.om.findElement. It is much more robust than FindElements.<BR>
RSWApp.GetDatabankValue Is what is needed anytime you want to return Databank values to the VBA environment<BR>
<BR>
Your code should look something like the following:<BR>
<BR>
Dim dbVal as string
<BR>
RSWApp.GetDataBankValue "MyDbVariable", dbVal<BR>
<BR>
This will return the contents of "MyDbVariable" which is defined and bound in the databank wizard to VBA variable dbVal.<BR>
<BR>
You can then use DBVal in your path:
<BR>
RSWApp.om.GetElementByPath "window(index=0).link(text="" & dbVal & "" | href=""javascript:OpenModal('DocumentCategoryAddEdit.aspx?documentCategoryId=377','400');"" | index=19)", element<BR>
<BR>
If you decide to use Find elements instead of GetElementByPath, the syntax would like the following: <BR>
<BR>
Set element = RSWApp.om.FindElement(dbVal, "A", "InnerText") <BR>
As you can see it is much simpler.<BR>
<BR>
Hope this helps! -
Whats the Middleware object for customer group code?
Hi Gurus,
Whats the name of middle ware object to transfer customer group codes from ECC to CRM?
VinayTo Know what all the object does you can see it in R3AC3. Go to Tcode R3AC3, and slect the object DNL_CUST_PRICE. If you go into the details,You will have a tab called Tables/Structures. In that you can see what all the tables are selected. By this you can determine what all data comes to CRM from R/3. Those tables are R3 tables. Same applies other obects.
-
Unable to add a performance widget to a dashboard in SCOM 2012
When trying to select a group or object when attempting to configure a new performance widget within a SCOM 2012 dashboard, I get the following error. Anybody any ideas what is causing this issue in my instance of SCOM 2012?
This is part of a custom built Management Pack and a Distributed Application linking just three computers together.
Any help would be welcomed.
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not produce
a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support
Services for more information.
at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String languageCode,
InstanceQueryOptions instanceQueryOptions)
at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)What is your SCOM version and patch level?
For SCOM 2012 SP1, there is known issue that:
When you select objects on the dashboard, you receive the following error message:
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not produce
a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions.
This can be resolved by apply UR4
https://support.microsoft.com/en-us/kb/2879276/
Roger -
Create Object for archiving Custom Table
Hi guru!!
I have a problem, I must create a archiving object for custom table..
I must create a report for READ, DELETE and ARCHIVING this type of table..
colud you help me?
thanks a lot guru!!!Hi,
Steps..
GO TO SE11
Give the table name
Press change..
In the menu..UTILITIES -> TABLE MAINTENANCE GENERATOR.
GIve the authorization group &NC&
Choose the single step radio button..
Give the screen number 1.
Give the function group..Give the table name itself as the function group.
Press create. button.
Now the screen is generated..go to sm30 and maintain the table entries..
Thanks,
Naren -
SWF File creation tool for Unifier Custom Dashboards
Hello Everyone,
I am looking for a tool that can allow me to create SWF files to be used for Custom Dashboard. I know that using third-party SWF file creation tools, swf template files can be created and we can build custom dashboards in Unifier.
Can anyone provide me with list of SWF file creation tools that you have used for Unifier dashboards.
ThanksThe only tool that the SWF Dashboards were designed to work with is Xcelcius. Please bear in mind that only legacy Skire customers that had created SFW dashboards have the ability to use SWF dashboards.
-
To Capture Excise Duties for Customer Material
Dear All,
Issue is regarding to capture excise invoice
for Customer Material.
1.
one of our client receives Customer material which
should not be reflected in
stock.
2. Excise should be captured which
receiving
3. Now
when this Customer material is returned back to
customer along with
the assembly (i.e. the material received from
customer is fixed
in Assembly and sent back to
customer),
4. Now
the excise
captured should be transfered back to customer's A/c.
I tried
doing by creating a material type as customer material, where in
Stock will be reflected but value will not be reflected, where exactly
we
can capture the excise details for this scenario.
How
to
proceed further to complete his scenario.
Consider this
issue
to be on high priority & i/p will be of great help.Dear Vijayashree
From your comments what I understood is that for a particular FERT, you are procuring one component from the buyer, assembling it and invoicing to the same customer.
If this is the scenario, I dont know how you can invoice without maintaining BOM for that.
If the client dont want to maintain BOM for the same, the only option is as follows to my knowledge.
Whenever the client receives the component, take credit of the duty amount by updating <b>J1IH</b>. While doing PGI, since you have not maintained this component in BOM, stock will <i>ONLY</i> reduce for other components. So no-where, your client can track the customers component.
Parallelly, apart from selling price, to the extent of excise duty value, one more condition (say ABCD, to be maintained. So in your pricing procedure, the assessable value should be PR00 + ABCD for which, the excise duty should be captured so that the client can recover the duty amount from customer.
Finally, for this practice, the client should maintain datas (how many procured and how many invoiced) manually to convince the government officials but then, I am not sure, how far this will be accepted by the officials.
Thanks
G. Lakshmipathi -
Hello All,
Wondering if someone has this working.
I am using Xcelsius to create the SWF file for custom dashboard though I believe it does not matter which product you use to create it.
Does anyone know what the URL to include in the SWF file that you upload into the custom dashboard in Unifier?
I think it might be something like 'https://myunifiersever.com/Dashboard1' where Dashboard1 is the name of my custom dashboard, but I am not entirely sure.
I get this error messsage below, but first I need to confirm that I am using the correct URL.
'An error has occurred.
For more information, contact the file creator or your system administrator.
Eror: Error #2032
Connection Type: XML Data'
If anyone can help be greatly appreciated.
Many Thanks
LimHow create a Lineitem Form report using Custom Print option with Word03? I have tried it but the line item is not displaying as a list instead it comes in a single line. I want it to be one by one. I am using the BP_LI wrapper only.
Thanks in Advance -
Missing performance counters when creating custom dashboard?
I've run into an issue when trying to create custom dashboards with performance views.
For example I have 2 servers with the same OS 2008 R2 one does not show the problem the other does.
The issue is that when I go in to create a custom dashboard and add a performance view the only counters listed for the problem server are network adapters. If I go to performance view on the server in scom it shows all the counters. The only place the counters
are missing is in the selection area for the dashboard performance view widget.
Do the performance views pull counter data from a different place then the dashboard performance widgets?Hi,
Here are two articles regarding to event 31552, you may check it:
The 31552 event, or “why is my data warehouse server consuming so much CPU?”
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
My Experience Handling Event ID: 31551 and 31552 issue
http://donald-scom.blogspot.com/2013/09/my-experience-handling-event-id-31552.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
ORACLE OBJECTS FOR OLE(OO4O) PERFORMANCE TUNING
제품 : ORACLE SERVER
작성날짜 : 1997-10-10
ODBC의 경우는 Block단위로 data를 Query하는데 비해 OLE의 경우는 한번에 전체
의 자료를 가져다가 Temporary storage space에 넣게 됩니다.
그래서 튜닝을 위해서는
Windows 3.1의 경우는 c:/windows/oraole.ini
WIN95의 경우는 HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OO4O
parameters를 수정해야 합니다.
만일 위의 File이 없는 경우는 모든 변수가 Default로 설정된 경우이므로 인스톨
된 Help를 자세히 읽어보고 적용을 해야합니다.
FetchLimit이 가장 큰 영향을 끼치는 파라미터로, 일반적으로 이 값이 클수록
속도가 빨라지게 됩니다. 다음은 관련 자료입니다.
Tuning and Customization
A number of working parameters of Oracle Objects for OLE can be
customized. Access to these parameters is provided through the Oracle
initialization file, by default named ORAOLE.INI.
Each entry currently available in that file is described below. The location
of the ORAOLE.INI file is specified by the ORAOLE environment variable.
Note that this variable should specify a full pathname to the Oracle
initialization file, which is not necessarily named ORAOLE.INI. If this
environment variable is not set, or does not specify a valid file entry, then
Oracle Objects for OLE looks for a file named ORAOLE.INI in the Windows
directory. If this file does not exist, all of the default values
listed will apply.
You can customize the following sections of the ORAOLE.INI file:
[Cache Parameters]
A cache consisting of temporary data files is created to manage amounts
of data too large to be maintained exclusively in memory. This cache
is needed primarily for dynaset objects, where, for example, a single
LONG RAW column can contain more data than exists in physical
(and virtual) emory.
The default values have been chosen for simple test cases, running on a machine
with limited Windows resources. Tuning with respect to your machine and
applications is recommended.
Note that the values specified below are for a single cache, and that a separate
cache is allocated for each object that requires one. For example, if
your application contains three dynaset objects, three independent data
caches are constructed, each using resources as described below.
SliceSize = 256 (default)
This entry specifies the minimum number of bytes used to store a piece
of data in the cache. Items smaller than this value are allocated the
full SliceSize bytes for storage; items larger than this value are
allocated an integral multiple of this space value. An example of an
item to be stored is a field value of a dynaset.
PerBlock = 16 (default)
This entry specifies the number of Slices (described in the preceding
entry) that are stored in a single block. A block is the minimum unit
of memory or disk allocation used within the cache. Blocks are read
from and written to the disk cache temporary file in their entirety. Assuming a SliceSize of 256 and a PerBlock value of 16, then the block
size is 256 * 16 = 4096 bytes.
CacheBlocks = 20 (default)
This entry specifies the maximum number of blocks held in memory at any
one time. As data is added to the cache, the number of used blocks
grows until the value of CacheBlocks is reached. Previous blocks are
swapped from memory to the cache temporary disk file to make room for
more blocks. The blocks are swapped based upon recent usage. The total
amount of memory used by the cache is calculated as the product of
(SliceSize * PerBlock * CacheBlocks).
Recommended Values: You may need to experiment to find optimal cache parameter
values for your applications and machine environment. Here are some guidelines
to keep in mind when selecting different values:
The larger the (SliceSize * PerBlock) value, the more disk I/O is
required for swapping individual blocks. The smaller the (SliceSize * PerBlock) value, the
more likely it is that blocks will need to be swapped to or from disk.
The larger the CacheBlocks value, the more memory is required, but the
less likely it is that Swapping will be required.
A reasonable experiment for determining optimal performance might
proceed as follows:
Keep the SliceSize >= 128 and vary PerBlock to give a range of block
sizes from 1K through 8K.
Vary the CacheBlocks value based upon available memory. Set it high
enough to avoid disk I/O, but not so high that Windows begins swapping
memory to disk.
Gradually decrease the CacheBlocks value until performance degrades or
you are satisfied with the memory usage. If performance drops off,
increase the CacheBlocks value once again as needed to restore
performance.
[Fetch Parameters]
FetchLimit = 20 (default)
This entry specifies the number of elements of the array into which data
is fetched from Oracle. If you change this value, all fetched values
are immediately placed into the cache, and all data is retrieved from
the cache. Therefore, you should create cache parameters such that all
of the data in the fetch arrays can fit into cache memory. Otherwise,
inefficiencies may result.
Increasing the FetchLimit value reduces the number of fetches (calls
to the database) calls and possibly the amount of network traffic.
However, with each fetch, more rows must be processed before user
operations can be performed. Increasing the FetchLimit increases
memory requirements as well.
FetchSize = 4096 (default)
This entry specifies the size, in bytes, of the buffer (string) used for
retrieved data. This buffer is used whenever a long or long raw column
is initially retrieved.
[General]
TempFileDirectory = [Path]
This entry provides one method for specifying disk drive and directory
location for the temporary cache files. The files are created in the
first legal directory path given by:
1.The drive and directory specified by the TMP environment variable
(this method takes precedence over all others);
2.The drive and directory specified by this entry (TempFileDirectory)
in the [general] section of the ORAOLE.INI file;
3.The drive and directory specified by the TEMP environment variable; or
4.The current working drive and directory.
HelpFile = [Path and File Name]
This entry specifies the full path (drive/path/filename) of the Oracle Objects
for OLE help file as needed by the Oracle Data Control. If this entry cannot
be located, the file ORACLEO.HLP is assumed to be in the directory where
ORADC.VBX is located
(normally \WINDOWS\SYSTEM).제품 : ORACLE SERVER
작성날짜 : 1997-10-10
ODBC의 경우는 Block단위로 data를 Query하는데 비해 OLE의 경우는 한번에 전체
의 자료를 가져다가 Temporary storage space에 넣게 됩니다.
그래서 튜닝을 위해서는
Windows 3.1의 경우는 c:/windows/oraole.ini
WIN95의 경우는 HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OO4O
parameters를 수정해야 합니다.
만일 위의 File이 없는 경우는 모든 변수가 Default로 설정된 경우이므로 인스톨
된 Help를 자세히 읽어보고 적용을 해야합니다.
FetchLimit이 가장 큰 영향을 끼치는 파라미터로, 일반적으로 이 값이 클수록
속도가 빨라지게 됩니다. 다음은 관련 자료입니다.
Tuning and Customization
A number of working parameters of Oracle Objects for OLE can be
customized. Access to these parameters is provided through the Oracle
initialization file, by default named ORAOLE.INI.
Each entry currently available in that file is described below. The location
of the ORAOLE.INI file is specified by the ORAOLE environment variable.
Note that this variable should specify a full pathname to the Oracle
initialization file, which is not necessarily named ORAOLE.INI. If this
environment variable is not set, or does not specify a valid file entry, then
Oracle Objects for OLE looks for a file named ORAOLE.INI in the Windows
directory. If this file does not exist, all of the default values
listed will apply.
You can customize the following sections of the ORAOLE.INI file:
[Cache Parameters]
A cache consisting of temporary data files is created to manage amounts
of data too large to be maintained exclusively in memory. This cache
is needed primarily for dynaset objects, where, for example, a single
LONG RAW column can contain more data than exists in physical
(and virtual) emory.
The default values have been chosen for simple test cases, running on a machine
with limited Windows resources. Tuning with respect to your machine and
applications is recommended.
Note that the values specified below are for a single cache, and that a separate
cache is allocated for each object that requires one. For example, if
your application contains three dynaset objects, three independent data
caches are constructed, each using resources as described below.
SliceSize = 256 (default)
This entry specifies the minimum number of bytes used to store a piece
of data in the cache. Items smaller than this value are allocated the
full SliceSize bytes for storage; items larger than this value are
allocated an integral multiple of this space value. An example of an
item to be stored is a field value of a dynaset.
PerBlock = 16 (default)
This entry specifies the number of Slices (described in the preceding
entry) that are stored in a single block. A block is the minimum unit
of memory or disk allocation used within the cache. Blocks are read
from and written to the disk cache temporary file in their entirety. Assuming a SliceSize of 256 and a PerBlock value of 16, then the block
size is 256 * 16 = 4096 bytes.
CacheBlocks = 20 (default)
This entry specifies the maximum number of blocks held in memory at any
one time. As data is added to the cache, the number of used blocks
grows until the value of CacheBlocks is reached. Previous blocks are
swapped from memory to the cache temporary disk file to make room for
more blocks. The blocks are swapped based upon recent usage. The total
amount of memory used by the cache is calculated as the product of
(SliceSize * PerBlock * CacheBlocks).
Recommended Values: You may need to experiment to find optimal cache parameter
values for your applications and machine environment. Here are some guidelines
to keep in mind when selecting different values:
The larger the (SliceSize * PerBlock) value, the more disk I/O is
required for swapping individual blocks. The smaller the (SliceSize * PerBlock) value, the
more likely it is that blocks will need to be swapped to or from disk.
The larger the CacheBlocks value, the more memory is required, but the
less likely it is that Swapping will be required.
A reasonable experiment for determining optimal performance might
proceed as follows:
Keep the SliceSize >= 128 and vary PerBlock to give a range of block
sizes from 1K through 8K.
Vary the CacheBlocks value based upon available memory. Set it high
enough to avoid disk I/O, but not so high that Windows begins swapping
memory to disk.
Gradually decrease the CacheBlocks value until performance degrades or
you are satisfied with the memory usage. If performance drops off,
increase the CacheBlocks value once again as needed to restore
performance.
[Fetch Parameters]
FetchLimit = 20 (default)
This entry specifies the number of elements of the array into which data
is fetched from Oracle. If you change this value, all fetched values
are immediately placed into the cache, and all data is retrieved from
the cache. Therefore, you should create cache parameters such that all
of the data in the fetch arrays can fit into cache memory. Otherwise,
inefficiencies may result.
Increasing the FetchLimit value reduces the number of fetches (calls
to the database) calls and possibly the amount of network traffic.
However, with each fetch, more rows must be processed before user
operations can be performed. Increasing the FetchLimit increases
memory requirements as well.
FetchSize = 4096 (default)
This entry specifies the size, in bytes, of the buffer (string) used for
retrieved data. This buffer is used whenever a long or long raw column
is initially retrieved.
[General]
TempFileDirectory = [Path]
This entry provides one method for specifying disk drive and directory
location for the temporary cache files. The files are created in the
first legal directory path given by:
1.The drive and directory specified by the TMP environment variable
(this method takes precedence over all others);
2.The drive and directory specified by this entry (TempFileDirectory)
in the [general] section of the ORAOLE.INI file;
3.The drive and directory specified by the TEMP environment variable; or
4.The current working drive and directory.
HelpFile = [Path and File Name]
This entry specifies the full path (drive/path/filename) of the Oracle Objects
for OLE help file as needed by the Oracle Data Control. If this entry cannot
be located, the file ORACLEO.HLP is assumed to be in the directory where
ORADC.VBX is located
(normally \WINDOWS\SYSTEM). -
Performance analysis for custom BADI in SAP BPC
Hi,
How to do the run time analysis for custom badi in SAP BW for optimization, please guide me. if some one know the procedure which part of code take more time for execution.
Regards
Vimal RajHello Vimal.
Please have more info here.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70187b3e-d5ce-2d10-d780-bb8b1a5b0bdc?QuickLink=index&overridelayout=true&49533857874839
Regards-Ashok
Maybe you are looking for
-
I have looked on here, and all I can see are solutions involving the use of both old and new computers, as I dont have the old one anymore I am hoping someone might have a workaround. Thanks
-
After upgrading to ML I have recived a PDF that if I open with Preview only shows me part of the info (layout tables and bullets) but the text does not show! The text works for the windows users and I can see it in OmniGraffle. Anyone an idea what's
-
What is the best way to organize LabVIEW VIs to be used with TestStand?
I'm using LabVIEW 8.6 with TestStand 4.1.1 and I'm trying to organize the VIs to later deploy them to a production PC. So, I organized them into a LV project and built a LLB with the "Source Distribution Tool". (Destination type: LLB) Some VIs in the
-
Spotlight search does not include map, iTunes, google...
I upgraded to yosemite from mavericks after seeing the latest feature videos from WWDC But greatly disappointed to see so many features showcased does not work the same way as it was showcased For example The spotlight is not working as expected, it
-
Hi,I can't open any of google websites,be it gmail,google,orkut etc these sites doesn't open in my dektop whether it is firefox or Internet explorer etc