Regarding Query Information

Hi Friends,
Pls can any one tell me , where information about all queries will be stored in bi server?
I had found some tables which will store the query information.
RSRREPDIR - Directory of all reports
RSZCOMPDIR - Directory of Reporting Components
RSZELTDIR-Directory of the Reporting Component Elements
Apart from above tables can we get data about queries anywhere else.
Thanks & Regards,
Ramnaresh .P

Dear Ramnaresh,
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting
Hope this helps..
Best Regards,
VVenkat..

Similar Messages

Regarding Query/Where box in oracle forms

Hi,
I have a query regarding query/where box in oracle.
When I enter ":" in one of the field query box pops up and when I enter some query and press F12 to execute query.
The OK button has to be pressed twice to retrieve the result.
Can anyone please let me know why this is happening, instead of retreiving results at one go by pressing OK once.
When does query box pos up? I have to avoid hitting OK button on query box twice.
Thanks for your advice in advance.
Thanks,
KLC
Edited by: user5411765 on Nov 22, 2010 10:44 PM

Hi,
Were you able to get around this problem? I am facing the same and need help! :(
Regards,
Arun

Modbus Ethernet Slave seems to fail when the Master query information simultaneously for more than 16 Coils or Discrete Inputs.

I'm developing an control application by using the Modbus TCP/IP for communicating with the host computer.
I'm using the Modbus Library for LabVIEW
(http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_node=DZ52363&p_source=External).
The LabVIEW MB Ethernet Slave seems to fail when the MB Ethernet Master
query information simultaneously for more than 16 Coils or Discrete
Inputs.
The Modbus Application Protocol Specification (http://www.Modbus-IDA.org) state that:
1- The function code 0x01 'Read Coilsis' is designed to read from 1 to 2000 contiguous status of coils in a remote device.
2- The function code 0x02 'Read Discrete Inputs' is designed to read
from 1 to 2000 contiguous status of discrete inputs in a remote device.
To test the behaviour of the LabVIEW MB Ethernet Slave I have modified
the 'MB Ethernet Example Slave.vi' by adding more Coils and Discrete
Inputs. I have added up ONLY to 20 Coils and 20 Discrete Inputs.
By using the 'MB Ethernet Example Master.vi' the answer to the MB query
is correct for the first 16 Coils or Discrete Inputs. Starting from the
17th Coil or Discrete Input the MB Ethernet Slave doesn't give any
answer.
By shifting the start point address the answer remain correct for the first 16 Coils or Discrete Inputs.
I have tested the slave by using also a third part MB Ethernet Master and the behaviour is the same.
1) There is a reason for this behaviour?
2) There is a Modbus Library for LabVIEW that satisfy the 'Modbus
Application Protocol Specification' managing from 1 to 2000 contiguous
status of Coils or Discrete Inputs?
Thanks,
Asper

I have the same problem with the MB Ethernet.
I need 40 Outputs.
The first 16 work perfectly. The next 8 coils do not work, The next 8 work, The next 16 do not work,The next 8 work,The next 24 do not work And work for the last 8. Conclusion, to activate the 40 outputs, I needed 88 coils.
Because 48 coil, do nothing Can someone help me and i cant implemet the jim solution

Regarding Query Performance.

Please tell me ..
How can i check the performance of query using index and without using index?

Hi,
As deepak said, query with and without index.
to get the cost and access path of the query get explain for the query. Read the Oracle docs
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/ex_plan.htm]
It is common to all the version from 9i as far as I know.
do
SQL> set autotrace on
SQL> run your query
you will get the explain plan and cost information in the sql prompt if the statistis_level is set to typical or all
Regards,
Vijayaraghavan K
Edited by: Vijayaraghavan Krishnan on Jan 18, 2010 4:24 PM

Query Regarding Query Results in CMC 3.1

Hi,
I want to check what reports are scheduled in particular folder. To get this information we can use query builder by writing a query,but i don't have access to query builder.
Can we check in CMC without access to query builder?I have seen one option In CMC 'Query Results'. What exactly Query results do and how to use.Can this be use to retrieve what reports are scheduled?
Regards
Ranjith

Hi Ranjith,
Query Results option in CMC is an application through which you could create Security Queries. It would help you identify the security setup and access being setup on the objects in your enviornment.
Regards,
Nakul Mehta

Regarding query mointor in 3.5

can anyone tell me ,without seeing Business Explorer,how can i find whether Exceptions and Conditions are there on Query in RSRT

Hi,
i tried in techincal information..but no information regarding this is present....

Query information on oracle streams setup

Is there a way to find out information of all "capture" , "propagation" and "apply" processes running on a database , therefore we can write a small script to manage (Start/stop) the above processes dynamically .
In otherwords, can we query any table and get information (names) of all above processes running on a database.

Hi Satish,
You can query the following tables to get the names of all capture,apply and propagation porcesses
DBA_CAPTURE
DBA_APPLY
DBA_PROPAGATION
http://download.oracle.com/docs/cd/B10501_01/server.920/a96571/strms_trouble.htm
Regards
Bilahari

Help regarding Query Browser in Xcelsius

Till now I have been practicing dashboards using spreadsheet as Data Source. But here our consultants have used the BEx query as the data source, which I could n't practice as because i do not have login id and password which is required to "Add Query' in the Xcelsius. Please find the below attached image file and please help in making understand what exactly have they done using the 'Query Browser'.
Would be more thankful, if anyone can make me understand the Concepts of 'Result Objects', Filters and Prompts.
The Drill Down of the First Query i.e.HC_FTE_HC_A_Payscaletype
--Regards
Ranendra

Hi Ranendra,
The only difference is till now u r working on offline data and with these Query Browser you have started working with live data.
Even though you get this live data you have to work on excel as u must dump the data to excelsheet.
Now we discuss the use of Query Browser:
Query browser is a new option we have in current version of Dashboard, we use this to connect
to
1) BeX queries through BICS connection
2) Unx universes which are created in IDT.
Your requirement falls under 1st category
There are few steps which you have to consider before going to result set designing, filters and prompts.
First we have to establish a connection which acts as an interface betwen your BeX query and dashboard and we do that by creating a BICS connection in the IDT.
Just create a BICS connection and this should be exported to repositiry.
Only after this you can access the connection through Query Browser in dashboards.
Now coming to result sets, these are actually your Query. Here you drag the desired dimension objects and measure objects.
Filters: If you want restrict your data, then we use filter. Drag the object in the filter pane.
Prompt: If you want user to make the selection of the parameter then u declare a prompt.
For indetail information about the other properties please go through the Suman description.
Regards,
Anjani Kumar C.A.

Creating a Universe on Bex Query --- Information Design Tool 4.0

Hi,
I am creating a Universe on a BeX Query, based on my understanding from the documentation i dont have to create a data foundation layer and i can directly call the connection in the Business Layer.
when I create a business layer and select OLAP connection (BICS connection), I get an error "this connection is not supported".
I was trying to look for a solution but i haven't found anything yet. Did anyone else encounter this issue. Please Share.
Regards,
Sheikh Hassan Ayub

HI there,
I read somewhere that the support for BEx Queries are done via Relational Connection. However, the BICS connection is only available via OLAP connection.
I was able to successfully create an OLAP Connection with BEx Queries. However when I do a Business Layer with this OLAP connection it says ERROR, not supported.
I havent tested creating a relational and thus having a Data Foundation yet as I am still have issues with my installation with ports.
Anyway, let me know if you are able to create a relational connection.
I'd be interested to hear your experience.
Regards,
Iris
P.S. the connection needs to be published.
Edited by: Iris Co on Nov 2, 2011 6:18 PM

Suggestion regarding query

Hi,
I have a requirement to select two columns from 6 million rows which is one database, and go through the result set, take the one of the column value as the criteria and select another column from 10000 rows table.
I have used two methods to work. Both are working but they are very slow.
I am using jdbc for this.
First method:
Following is the pseudo code for the same
--Select all rows from the table 1
while (rs.next())
String column1= rs.getString(1);
String Query 2= "Select column2 from table 2 where my_field=column1";
--prepare the statement1 using query2
-- execute the statement1 and copy in to rs1
-- while (rs1.next())
do something
Second method:
In this one instead of querying the database for each row in the first resutl set, used a stored procedure which returns a ref cursor taking the array as the input string.
create or replace type mylist as table of varchar2(20);
create or replace type outlist as table of BLOB;
create or replace package my_pkg
as
type rc is ref cursor;
procedure p(myval_list in mylist, outcur OUT rc);
end;
create or replace package body my_pkg
as
PROCEDURE get_phonetype(myval_list IN imeilist,orefcur OUT rc )
AS
l_data outlist := outlist();
tmp_profile BLOB;
BEGIN
--DBMS_OUTPUT.put_line(myval_list.COUNT);
FOR i IN myval_list.FIRST .. myval_list.LAST
LOOP
BEGIN
SELECT column1 INTO tmp_profile FROM table1 WHERE
column2 IN (SELECT column2
FROM table2
WHERE (column3< myval_list(i) AND column4 > myval_list(i)));
--DBMS_OUTPUT.put_line(tmp_phone);
l_data.extend;
l_data(i) := tmp_profile;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
END LOOP;
open outcur for
select * from TABLE( cast (l_data as outlist));
END;
END;
in the java program:
--Select all rows from the table 1
while (rs.next())
--loop few times to populate the column1 string arrays
OracleCallableStatement stmt1=(OracleCallableStatement)conn.prepareCall("{call p(?,?)}");
-- register the out parameter as ORACLETYPES.CURSOR
--prepare the array descriptor for the array, set the array using column1 values
-- set the first argument as array
-- retrieve the result set
--do something with the result set
} //end of while
I thought using the stored procedure would make my process faster, but the second approach deteriated the execution time.
I could not understand where I did the mistake. FOr the 200000 rows for the first table, first approach executed in 10 minutes and the second was taking more than hours.
Can some one help me in fine tuning the stored procedure or suggest an alternative best method.
Regards,
Syam

Syam,
Not knowing your table data or the whole of the queries you're making, this may not be feasible. But could you write this as either a single (albeit complex) query, or perhaps a PL/SQL block that uses a temp table or two, but still does all of the processing in Oracle as queries, not loops?
From the examples you gave, it looks like putting it into one query would just involve a few table joins. But they look like you abbreviated some more complex processing...

In a report, select the column which can link to a query information

Hi,
I want to open a report in which there is a column, say, Name, when I click it
I can view the other information about this Name, say, address or contact telephone no.
Regards,
Simon Wong

Hi,
1. Go to any report with link column to a form. It is a very common situation.
2. Go to the link column Column Attributes/Column Link/Target and change it to URL.
3. javascript:popupURL('f?p=&APP_ID.:205:&SESSION.::&DEBUG.::::YES','Help','scrollbars=yes,resizable=yes,width=625,height=350,left=25,top=150');
4. Replace 205 (It is my page number) with the number of the page which you are working on.
5. Apply/Apply/Run the page.
6. You should see the printer friendly version of your page in separate window without loosing original one.
This is a very simple, easy to use and understand example.
You can replace “205” with any report showing Address … for the client.
Good luck!
Konstantin
[email protected]

Urgent..help regarding query

can anyone tell me what this code does..
REPORT Z_SD_Q_03 MESSAGE-ID Z_SD.
PROGRAMA    : Z_SD_Q_03
FECHA       : 12-07-1999
AUTOR       : MADASV
DESCRIPCION : Ejecutar query 03(SD)
VARIABLES
DATA: WERKS LIKE LIKP-WERKS,
      NOMBRE_REPORT LIKE AQADEF-PGNAME.
RANGES
RANGES CENTRO FOR LIKP-WERKS.
CONSTANTS
CONSTANTS: QUERY LIKE AQADEF-QUNAME VALUE '03',
           USERGROUP LIKE AQADEF-BGNAME VALUE 'SD'.
START-OF-SELECTION
START-OF-SELECTION.
Centro
GET PARAMETER ID 'WR1' FIELD WERKS.
CENTRO-LOW = WERKS.
CENTRO-SIGN = 'I'.
CENTRO-OPTION = 'EQ'.
APPEND CENTRO.
CALL FUNCTION 'RSAQ_EXIST_QUERY'
       EXPORTING
          WORKSPACE    = ' '
            USERGROUP    = USERGROUP
            QUERY        = QUERY
       IMPORTING
            REPORTNAME   = NOMBRE_REPORT
       EXCEPTIONS
            NO_USERGROUP = 1
            NO_QUERY     = 2
            OTHERS       = 3
IF SY-SUBRC <> 0.
    MESSAGE E100 WITH QUERY SY-MANDT.
ELSE.
    SUBMIT (NOMBRE_REPORT)
                    WITH OFICI        IN CENTRO
                    WITH SP$00001-LOW = SY-DATUM
                    VIA SELECTION-SCREEN.
ENDIF.

it's checking display authorization of plant WR1 for current user .
Reward if useful
Regards
ANUPAM

Queries regarding Query Builder.

How to write a query to get the information of a Group.That information should have the number of users , sub groups and sub group users.
Thanks.

SELECT SI_NAME, SI_DESCRIPTION, SI_ID, SI_ALIASES, SI_GROUP_MEMBERS
FROM
CI_SYSTEMOBJECTS
WHERE
SI_KIND = 'usergroup'
The query above will return all the groups within the system specifying the following information:
SI_NAME: Group Name
SI_DESCRIPTION: Group Description
SI_ID: The Unique ID of object within BOE system. This ID is added to SI_USERGROUP property for each User in BOE system that is part of the group.
SI_ALIASES: Specifies if the group is an Enterprise, Active Directory, LDAP, or Windows NT group.
SI_GROUP_MEMBERS: Lists all the unique user SI_IDu2019s that belong to the group.
Using that you can dig up the rest of the information you need.

Regarding query

Dear Experts,
I have one doubt regarding below query...
I have two tables of data like below..
Table A
CustId Name CustType
1 xyz pres
2 yyy Pres
3 zzz Pres
4 RRR pres
5 kkk Pres
Table B
AFfId From_cust_Id To_cust_id Afftype
11 1 2 Hosp
12 1 3 Hosp
13 2 4 Hosp
14 2 5 Hosp
I want to generate the output in the below format...
CustId Inst1 Inst2 Inst3
1 xyz yyy zzz
2 yyy RRR KKK
Please help me on this query..
Thanks a lot in advance..
Oracle Version : 10g
Thank you.
Sunitha.

sunitha2010 wrote:
Dear Experts,
I have one doubt regarding below query...I don't see any query below
How to ask question
SQL and PL/SQL FAQ
Handle:     sunitha2010
Status Level:     Newbie
Registered:     May 13, 2010
Total Posts:     43
Total Questions:     17 (15 unresolved)
why so MANY unanswered questions?

Regarding Query and Logical database

Hi All,
I have one requirement to create a report which gives all selection fields of a query.I got the selection fields defined in the query,but some extra selection fields are coming from logical database,which query uses.These extra fields count is different for different queries using same logical data base.Please suggest me a solution.
Regards
Shibin

Hi Jogeswara,
Thanks for your inputs.
But my question is, how can I filter the data which is being fetched by standard logical database. I cannot go inside the std. LDB and change internal tables of it. I tried coding in extras, but I think it works only if we want to add additional fields in output.
At present, we are considering the option of creating a z LDB where we copy. std. LDB and also add the reqd. table which is not present in LDB.
Is there any other option?
Please provide your valuable inputs.
Regards,
Imran Kundan.

Regarding Query Information

Similar Messages

Maybe you are looking for