Query Regarding Query Results in CMC 3.1

Hi,
I want to check what reports are scheduled in particular folder. To get this information we can use query builder by writing a query,but i don't have access to query builder.
Can we check in CMC without access to query builder?I have seen one option In CMC 'Query Results'. What exactly Query results do and how to use.Can this be use to retrieve what reports are scheduled?
Regards
Ranjith

Hi Ranjith,
Query Results option in CMC is an application through which you could create Security Queries. It would help you identify the security setup and access being setup on the objects in your enviornment.
Regards,
Nakul Mehta

Similar Messages

Large query result set

Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for search in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It results in
too much memory consumtion in our ejb application. What is the best way to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

you can think of following options
1) paging: read only few thousands at a time and maintain a index to page
through complete dataset
2) caching!
a) you can create a serialized data file in server to cache the result set
and can use that to browse through. you may do on the fly
compression/uncompression while sending data to client.
b) applet based solution where caching could be in client side. Look in
http://www.sitraka.com/software/jclass/cs_ims.html
thanks,
Srinivas
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Thanks Slava Imeshev,
We already have search criteria and a limit. When records exceeds thatlimit
then we prompt user that it may take sometime, do you want to proceed? If
he clicks yes then we retrieve those records. This results in lot ofmemory
consumtion.
I was thinking if there is some way that from database I can retrieve some
block of records at a time rather the all records of a query. I wander how
internet search sites work, where thousnds of sites/pages match criteriaand
client can move back & front on any page.
Regards,
Parvez
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi chauhan,
You may want to narrow search criteria along with processing a
limited number of resulting records. I.e. if the size of the result
is bigger than a limit, you stop fetching results and notify the client
that search criteria should be narrowed.
HTH.
Regards,
Slava Imeshev
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for
search
in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It
results
in
too much memory consumtion in our ejb application. What is the best
way
to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

Select query resulting in redo?

Hi All,
Does select query results in redo? In what cases this happens?
Regards,
Sphinx

mtefft wrote:
Another possibility is that the SELECT query invokes a PL/SQL function that performs insert, update or delete.
This is a poor practice for a number of reasons but they are out there.
Disagree with that. Proof:
SQL> create table x(y number);
Table created.
SQL> create function f return number as
2 begin
3 insert into x values (2);
4 return 1;
5 end;
6 /
Function created.
SQL> select dummy, f() from dual;
select dummy, f() from dual
ERROR at line 1:
ORA-14551: cannot perform a DML operation inside a query
ORA-06512: at "HR.F", line 3

Query Results - failed with exclamation mark on icon

Hi there,
When I run a select query I now get an exclamation mark on the green arrow icon in the Query Results. I've been able to run this query before and no changes have been made.
In the Query Results window if I click the 'reload' icon (two blue arrows) the Output results flash up and then clear.
Version 3.0.02   //   Build MAIN-02.37   //   Java Platform 1.6.0_11
As far as I know I have not made any configuration or database connection changes. This issue appears on all DB connections and all SQL I try to run.
This appears to be the error:
java.lang.NullPointerException
    at oracle.dbtools.worksheet.sqlhistory.db.HistoryDB2.getRowFor(HistoryDB2.java:43)
    at oracle.dbtools.worksheet.sqlhistory.SqlEditorHistory.saveSql(SqlEditorHistory.java:85)
    at oracle.dbtools.worksheet.StatementRunnerResultsPanel$4.taskFinished(StatementRunnerResultsPanel.java:287)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskAdapter.stateChanged(RaptorTaskAdapter.java:95)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.notifyListener(RaptorTaskDescriptor.java:143)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:370)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskDescriptor.setStatus(RaptorTaskDescriptor.java:352)
    at oracle.dbtools.raptor.backgroundTask.RaptorTask.setStatus(RaptorTask.java:257)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.done(RaptorTaskManager.java:479)
    at java.util.concurrent.FutureTask$Sync.innerSet(FutureTask.java:251)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:500)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:619)
Closing/reopening SQL Developer doesn't help. I've restarted my PC and the results do appear, but then the same error appears again.
Any help would be much appreciated. Thanks.

Hi Jon_Male,
A couple of points:
1. Your release is a bit out-of-date, plus it seems to be an early adopter release rather than the 3.0 production release (3.0.04.34).
2. The following old forum post discusses the same behavior occurring after an OutOfMemory error: exclamation mark on script output tab
Regards,
Gary
SQL Developer Team

How to output a query results into a text file

How to output a query results into a text file instead of outputing it to the screen..
is there a way for us to write a SQL query which specifies to output the query results to a text file.
Pls let me know how to do it
Thanking u in advance
regards
Muraly

Muraly,
If you are using SQL*Plus 8.1.6 or later, you can also spool output to a file in HTML format, eg
SET MARKUP HTML ON SPOOL ON PREFORMAT OFF ENTMAP ON
SPOOL c:\temp\report.html
SELECT DEPARTMENT_NAME, CITY
FROM EMP_DETAILS_VIEW
WHERE SALARY>12000;
SPOOL OFF
SET MARKUP HTML ENTMAP OFF
In iSQL*Plus 9.0.1 (the browser-based interface to SQL*Plus) onwards, you can also send the HTML output to a new web browser window, or an html file -- much easier than the command line method.
Alison

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Refresh characteristic texts in query result without logoff in Bex 7.0

Dear Experts,
I'm using a query in BEx 7.0 and switched off all caching parameters in RSRT. For instantly reloading values from Cube/DSO this is working fine.
Some of my characteristics are shown as key + text in query result. Unfortulately these texts are not updated during the query reloads. I do not want the user to logoff / logon the report to get the updated texts.
Interestingly, after a refresh the texts for those characteristics are updated immediately for all filter items, but not in the result area.
Could you give me a hint, how I will be able to refresh those characteristic texts as same as the values in the infoprovider? E.g. using VBA makros or by customizing of specific workbook settings?
Thanks for your help!
Kind regards,
Tim
Edited by: Tim Kley on Apr 19, 2010 2:42 PM

Hi,
what have you achieved so far concerning this.
My post from today was also going in this topic.
In Bex update after attribute change run
The setting of this paramter I mentioned there could maybe help in your case.
   transaction "RS_FRONTEND_INIT" add the parameter "ANA_ENHANCE_REFRESH" with value "X"
   o Open the analyzer and connect to system to open WB
   o Click on the refresh button
   o New functionallity "Full Refresh Of Active Queries" is now available.
Best regards Harry

How to save query result on the file server as excel file?

Hi everyone,
I need to save the the query result on the file server as excel file.
Do you have any idees how can I do it?
Regards
Erwin

i dont think you can save as excel file but you can save it as CSV use APD or RSCRM BAPI for this

Error occurred while sending query result: 'java.lang.NullPointerException'

I am doing end to end scenario from SQL server to File
JDBC --XI -- File
I am getting the following Error while monitoring the sender CC in RWB
"Error occurred while sending query result: 'java.lang.NullPointerException'
Please Help !!

Hi,
To see the Adapter Error log, try:
http://<XiServerHostName>:<J2EE-Port>/MessagingSystem
Try viewing the Audit Log for each message (Newspaper Icon)
Regards,
Amitabha

How to upload the web query result to CSV/Text file

Hi,
Kindly help me on the following.
1)       I have info-provider (IP), which has info-objects "company code" and "supplier".
2)       I built a query by putting company-code with a variable in free-charateristics and supplier-code in row.
3)       When I run this query, it will ask company-code as input and the result will be filtered using company-code.
4)       For this query, I created a web-template and assigned data-provider to display the data on the web.
5)       The user wants to enter input company-code='1000' and write the data in a CSV file in a specific directory. i.e, by clicking the execute button (after entering company code) , the result should go to the CSV or text file. i.e. the application should automatically generate the file with query results.
Note: The user should not use context menu to EXPORT TO CSV OR EXCEL file.
Please let me know, if there is any tutorial. Thanks a lot advance help.
Regards
Kandasamy

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

How to display the query results in several pages?.

Hi,
i want to display the query results in several pages. for example my query result found 50 matches, now i want to print 20 per pages next 20 will be in next pages. iam using only jsp & mysql.
Regards
Chinna

Hi, what you are trying accomplish is known as pagination.
You could use JSTL tags with Custom Tags to perform pagination in your JSP pages.
evnafets showed me DisplayTags , you could use those as well http://displaytag.sourceforge.net/11/tut_externalSortAndPage.html
Here is one article on paging:
http://www.javaworld.com/javaworld/jw-07-2004/jw-0726-pagination.html

How to get the dynamic query result

If in one query, there is the amount range dimension, based on different dimension value combination, the customer revenue should be refreshed into different range, how to make it by cube?
eg.
Customer Store    Material Month    Amount
C001     M & S    Tennis    2005/01   "10"
C001     Douglas Tennis    2005/02   "60"
C002     M & S    Soccer    2005/01    "1"
C002     M & S    Soccer    2005/02    "50"
C002     M & S    Tennis    2005/02    "50"
C003     Douglas Tennis    2005/01    20
Query condition:
Time Customer Amount Range     Amount
2005 C001     0~50_____________0
2005 C001     51~100___________70
2005 C001     100 +____________0
2005 C002     0~50_____________0
2005 C002     51~100___________0
2005 C002     100+_____________101
2005 C003     0~50_____________20
2005 C003     51~100___________0
2005 C003     100+_____________0
However, if I drill down Time into month, the result is total different, I only list the result related to customer C001
Time     Customer Amount Range    Amount
2005/01 C001      0~50____________10
2005/01 C001      51~100__________0
2005/01 C001      100 +___________0
2005/02 C001      0~50____________0
2005/02 C001      51~100__________60
2005/02 C001      100 +___________0
Any good solution on that? Thanks for any input.
Message was edited by: Lei Shao

Hi, Sen,
I used your solution in my infocube and query, where I created a structure with 'between'. However, it is still the simple summation in different amount range.
Just like the following:
Sales ORG / Sales Office / Sales Rep / Amount
East      / Atlanta      / 1001      / 3
East      / Atlanta      / 1002      / 4
So the query result is the same:
S-ORG / S-Office / S-Rep / Amount Range / Amount
East / Atlanta / 1001 / 0~5          / 3
East / Atlanta / 1001 / 5+           / 0
East / Atlanta / 1002 / 0~5          / 4
East / Atlanta / 1002 / 5+           / 0
When I remove 'drill down' for Sales Rep, the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 7
East / Atlanta / 5+           / 0
However our expection for the result is different, because in business traction, if we remove sales rep, the sales org and sales office will get the sub-total like this: (we can image it with ABAP program sub-total)
Sales ORG / Sales Office / Amount
East      / Atlanta      / 7
So our expection for the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 0
East / Atlanta / 5+           / 7
Therefore, any good suggestion for this?
Thanks a lot
Regards,
LS

2.1.0.62: Exporting query results does not work if SQL has a join

I get an error message, when I try to export the following test case to any data format.
create table test1 (id number(2), text varchar2(5));
create table test2 (id number(2), text varchar2(5));
insert into test1 values (1,'test');
insert into test2 values (1,'test');
select t1.*
from
test1 t1,
test2 t2
where
t1.id=t2.id;
I try to translate my german error message to english:
"There are no valid columns for export available. Clob- or Blob-Columns are currently not supported"
I get this message, when I right click into the query result grid and select export and then any data format.
Hope that is not a double post but searching for export did not find results for 2.1.
The following SQL also produces the error:
select t1.* from test1 t1;
These SQLs can be exported though:
select * from test1 t1;
select t1.id from test1 t1;
I should have mentioned that I work with Windows XP and Oracle 10.2.0.4.
Regards,
dhalek
Edited by: dhalek on Oct 13, 2009 5:04 PM

Hi,
Dhalek.
I've got the same problem here.
In my SQL Dev, I disabled the Autopopup code completion insight in SQL Worksheet. (Tools - Preferences - Code Editor - Code Completion - untick the checkbox). Restart SQL Dev. Tried to export a query.
The same error message appears.
My workaround is to re-enable the autopopup and restart SQL Dev.
The disabled autopopup code completion insight caused me these
2.1 EA1: Bugs - cannot Export Data from Grid
2.1 EA2: Bugs on code completion for displaying column name
Hope this helps,
Buntoro

Sending Email with Query Result (Table Format)

Hi,
I have a query result from ExecuteSQL task e.g.:
ID Product
1 Pencil
2 Crayon
3 Eraser
I want to send an email with the above query result and I want it to be in Table format (such as in Microsoft Word with rows and column lines) to allow better readability to the receiver.
Is it possible in SSIS?
cherriesh

It has to be HTML format . Read Tony's article
http://sqlblogcasts.com/blogs/tonyrogerson/archive/2008/03/28/send-table-or-view-as-embedded-html-lt-table-gt-in-an-email-stored-procedure.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Query Regarding Query Results in CMC 3.1

Similar Messages

Maybe you are looking for