Regarding Reloading of Data Into The Cube

Hi All,
I have a situation where I have to reload the data into the InfoCube. The InfoCube is already having Full Load and Deltas for a period of 1 month. Now if I do a full load will I get the data as of today and can I do deltas tomorrow onwards after doing an Init???
Should I have to delete the Data from Delta Queue in Source System (RSA7)???
Please clarify me.
Thanks in advance.
Regards
Jay

Hi,
if you already have intialisations on the cube you can do a repair ful load. which will bring all the data and you can continue using the delta functionality from tomorrow.
hope this helps.
Ravi.

Similar Messages

Error while loading data into the cube

Hi,
I loaded data on to PSA and when I am loading the data to the cube through DataTransferProcess, I get an error (red color).
Through "Manage", I could see teh request in red. How do I get to knoe the exact error? Also what could be the possibel reason for this?
Also can some one explain the Datatransfer process(not in process chain)?
Regards,
Sam

Hi Sam
after you load the data through DTP(after click on execute button..) > just go to monitor screen.. in that press the refresh button..> in that it self.. you can find the logs..
otherwise.. in the request screen also.. beside of the request number... you can see the logs icon.. you can click on this..
DTP means..
DTP-used for data transfer process from psa to data target..
check thi link..for DTP:
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
to load data in to the datatargets or infoproviders like DSO, cube....
in your case.. the problem may be.. check the date formats.. special cherectrs... and
REGARDS
@JAY

Error while loading the data into the cube using DTP.

No SID found for the value'UL' of characterstics 0BASE_UOM.
Please give me the idea ,to solve the error.
Thanks&Regards
Syam Prasad Dasari

https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=6733764
https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=5062570

Data Load into the Cube based on Fiscal Year

Hi All,
I was told to load the data into the cube coming from 3 different datasources, but based on fiscal year. I was told to load the data for 2010, 2009 and so on.
Any suggestions please...

Hi Dear,
            Write the following code in start Routine of Update Rule:-
In BI 3.x
               Delete DATA_Package where calday lt '20090101' and calday gt '20091231'.
           to load data onlyfor 2009.
          same thing for 2010.
In BI 7.0
           Start Routine of Transformation:-
          delete source_package where calday lt '20090101' and calday gt '20091231'.
Regards
Obaid

How can i retrieved data into the infocube from archived files

hi,
i have archived cube data and i have to load data into the cube from archived files.
so now i want to find archived files and how to load data into the cube.
thanks

Hi.....
Reloading archived data should be an exception rather than the general case, since data should be
archived only if it is not needed in the database anymore. When the archived data target is serving also as a
datamart to populate other data targets, Its recommend that you load the data to a copy of the original
(archived) data target, and combine the two resulting data targets with a MultiProvider.
In order to reload the data to a data target, you have to use the export DataSource of the archived data
target. Therefore, you create an update rule based on the respective InfoSource (technical name 8<data
target name>). You then trigger the upload either by using Update ODS data in data target or by
replicating the DataSources of the MYSELF source system and subsequently scheduling an InfoPackage
for the respective InfoSource
If you want to read the data for reporting or
control purposes, you have to write a report, which reads data from the archive files sequentially.
Alternatively, you can also use the Archiving Information System (AS). This tool enables you to define an
InfoStructure, and create reports based on these InfoStructures. The InfoStructures define an index for
the archive file data. At the moment, the archiving process in the BW system does not fill the
InfoStructures during the archiving session automatically. This has to be performed manually when
needed.
Another way of displaying data from the archive file is by using the Extractor checker (TCODE RSA3).
Enter the name of the export DataSource of the respective data target (name of the data target preceded
by 8), and choose the archive files that are to be read. The extractor checker reads the selected archive
files sequentially. Selection conditions can be entered for filtering but have to be entered in in internal
format
It will remain same in the change log table.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b32837f2-0c01-0010-68a3-c45f8443f01d
Hope this helps you...........
Regards,
Debjani............

How to reduce the run time of ABAP code (BADI) when it is reading huge data from BPC Cube and thus writing back huge data to the cube.

Hi All ,
In Case of reading huge amount of record from BPC Cube from BADI code , performing calculations and writing back huge amount of data into the cube , It takes lot of time . If there is any suggestion to read the data from Cube or writing data into the cube using some Parallel Processing methods , Then Please suggest .
Regards,
SHUBHAM

Hi Gersh ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP          INSTANCE
parallel_generators        abc.co.in_10         ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST          abc.co.in
IP address                  10.10.10.10
Instance number          10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
I have raised this question on the below thread :
How to configure RZ12 and SM59 ABAP connection settings when we have work with Load Balancing servers rather than a specific server .
Regards,
SHUBHAM

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Base unit of measure values not loading into the cube.

HI Xperts,
i have created a generic data source and in that i took unit as base_uom and one quantity keyfigure and in my cube i have taken 0base_uom and a quantity key figure infoobject.
in transformation i mapped the base_uom(source) to 0base_uom (target)and soures quantity KF infoobject to targer keyfigure infoobject.
after loading the data into my cube..i am getting the values for quantity keyfiure infoobject but for unit (CS,IT) i am not getting any value in my cube.
so in my report also the for a specific quantity unit value is showing ERR.which is wrong.it should show me as CS or IT(10CS or 15 IT etc).
Can any one help me on this?
Regards,
satihs

> in transformation i mapped the base_uom(source) to 0base_uom (target)and soures quantity KF infoobject to targer keyfigure infoobject.
This is not how you map Key Figure and Currency in cube..
First check in RSD5 whether you have Unit Infoobjet assigned to the key figure.
in Type/Unit tab ..you have to assign 0BASE_UOM to your Key Figure.
Then in transformation from DataSource to Cube : connect both the Unit and Key ( in source) figure to target KF.
In Rule Detail you have to select .
Target Unit = 0BASE_UOM
Unit = From Source
Source Unit = Your source field name for unit
Let me know after doing all these whether are getting unit field in cube
Regards
Anindya

How to enhance the new field(mblnr) into the cube.

Dear Experts,
My client wants GR document number and GR posting date in the drill down option in reporting, i have taken the field names of that. MBLNR and BUDAT, I only found BUDAT in the datasourse field level,please help me how to enchance MBLNR into the cube 0PUR_C01.
Thank You
Regards
Srikanth

SELF

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

Loading data into two cubes

We want to set up a delta refresh from R/3 data that will pull data into two cubes. One cube I want all the records to be loaded, in the second cube I want to filter the records that are loaded into that cube. I can figure out how to load the data into two cubes, but can I place a filter on one of the loads. (i.e. only load records of where type = 'X')
Thanks,
Chris

You can do that in the Update Rules to the second cube... In the Start Routine...
DELETE FROM DATA_PACKAGE
WHERE type EQ 'X'.
(Please, verify the right syntax)
Then with only one Infopackage, you can load both cube with different conditions.
Hope it helps.
Regards,
Luis

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

Could not see loaded data in the Cube

Hi Gurus,
Pl. help me in this: I am not able to get teh data loaded into the cube. In PSA it is loaded right. after that I created Transformation on InfoCube and I got Proposal Generated. Then I created DTP and executed, and monitor shows green. but when I right click on the cube and look for data(also maintain master data on InfoObject), I see only the headers of the table but no data is displayed.
I hope you have similar situations. Thanking you in advance.

Check if the request is reportable, sometimes the load could be fine, but the request may not be reportable. Make sure in your start routine you don't have a routine which will filter or delete the data out from the cube before it gets update.
thanks.
Wond

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Regarding Reloading of Data Into The Cube

Similar Messages

Maybe you are looking for