Regarding Sements Mapping for desired output

HI All,
I am just confused how to handle this
I have two source segments E1EDL37, E1EDL44 and Target IBINPT00
all 3 segments occurence is 0...9999
So for each occurence of E1EDL37 n no of sements repeat for E1EDL44(is in E1EDL37 only) and mapped to IBINPT00
I have mapped E1EDL44 segment and fields to IBINPT00 and also E1EDL37 fields to IBINPT00 fields
Now when i run the scenario i am getting the output like this
0000214031 00007205170000000224 1000 1000 GN602 5190 9H
 1000 1000 GN602 GN602 6H 00002
 1000 1000 GN602 GN602 7 00003
 1000 1000 GN602 GN602 7H 00004
 1000 1000 GN602 GN602 8 00005
But i should get the output like this
0000214031 00007205170000000224 1000 1000 GN602 5190 9H
0000214031 00007205170000000224 1000 1000 GN602 5190 6H
0000214031 00007205170000000224 1000 1000 GN602 5190 7
0000214031 00007205170000000224 1000 1000 GN602 5190 7H
So each fields of E1EDL37(has 1st and 2nd field) also should be repeated with the no of segments for E1EDL44 to target IBINPT00
So any one please give suggestion on how to handle the desired output
Thanks and Regards,
sridhar

Hi Himadri,
I have used useOneAsMany node function but now i am not getting any values to the target...
I have used like this
E1EDL37,EXIDV,EXIDV to useOneAsMany --> SplitByValue > IBINPT00>IDVOL(target filed)...
I am not getting the values now at all why? could u help me
Note E1EDL37 (occurence is 0..9999) , EXIDV occurence (0.1) IDVOL (0.1)
Thanks and Regards,
sridhar

Similar Messages

Format-number,decimal not giving desired output for PO Print report XSL-FO

Hi All,
My requirement was to get the Unit price in european format which is 10.000,00
Iam getting it as 10000,00 but the client needs the thousand's seperator.
if have used the decimal seperator but iam getting the Unit Price value as 'NAN' when i submit it for an international language like Italian or Spanish
This is what i have done
set the decimal format
<xsl:decimal-format name="euro" decimal-separator="," grouping-separator="."/>
<xsl:value-of select="format-number(UNIT_PRICE, '#.###,####', 'euro')"/>
This gives the desired output when i select the US language.
While submitting through the conc request
If i change the Numeric char to '.,' by clickin on Language settings..It works great
I have tried to use the replace function but the syntax is not correct
format-number(replace('UNIT_PRICE',',','.'), '#.###.###.###,####', 'euro')
Any Help would be greatly appreciated.
Thanks
Mirza

Hi Mirza,
I'm struggling having the same problem. Have you found any solution?
Best regards
Kenneth

Regarding proxy generation for 1:n mapping

Hi Experts,
I am using 1:N mapping for a file to RFC scenario. I have one file at sender side and 3 RFCs in the receiver side. These RFCs belong to a BI system. Now I need to generate proxies for these. I am not getting the proxies in SPROXY. How can do this. How can I generate proxies for these 3 RFCs.Please help me.
Thanks&Regards,
Reyaz Hussain

If u r thinking about both multimapping and use of server proxy, then u have to use BPM.
If we import the RFCs in external definition , can we generate proxies for RFC.
Yes, but this would not exactly mean that you are generating proxies for RFC. It would just mean that you are generating proxies for an interface which has same structure as that of RFC. Therefore RFC at receiver end won't be called.
Regards,
Prateek

Java Mapping for JDBC Interface

Hi,
please help on java mapping for my jdbc interface.
my java code for jdbc is:
Created on May 7, 2008
TODO To change the template for this generated file go to
Window - Preferences - Java - Code Style - Code Templates
package XiMappingDB2.com.xi.test;
@author miracle
TODO To change the template for this generated type comment go to
Window - Preferences - Java - Code Style - Code Templates
Created on May 2, 2008
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.xi.test;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;
import java.util.HashMap;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
@author kotla
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class NameMerge implements StreamTransformation {
 private Map param = null;
 private MappingTrace trace = null;
 public void setParameter(Map param){
 this.param = param;
 if (param == null) {
 this.param = new HashMap();
 public void execute(InputStream input, OutputStream output)
 throws StreamTransformationException {
 AbstractTrace trace = null;
 String RESULT = new String();
 trace =
 (AbstractTrace) param.get(
 StreamTransformationConstants.MAPPING_TRACE);
 try {
 //Create DOM parser
 DocumentBuilderFactory factory =
 DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 //Parse input to create document tree
 Document doc = builder.parse(input);
 trace.addInfo(doc.toString());
 // Map the elements
 Node root = doc.getFirstChild(); // gets the root element
 NodeList children = root.getChildNodes();
 for (int item = 0; item < children.getLength(); item++) {
 if (children.item(item) instanceof Element) {
 root = (Element) children.item(item);
 NodeList ch = root.getChildNodes();
 RESULT = RESULT.concat(ch.item(0).getNodeValue() + " ");
 trace.addInfo(RESULT); }
 catch (Exception e) {
 trace.addDebugMessage(e.getMessage());
 //Return the output document
 String document_exit = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:Person2 xmlns:ns0=\"urn:xxxxx.com:test:mapping:lookups\"><RESULT>"
 + RESULT
 + "</RESULT></ns0:Person2>";
 insertDB(RESULT);
 try
 output.write(document_exit.getBytes());
 catch (IOException e1) {
 trace.addDebugMessage(e1.getMessage());
public void insertDB(String DETAILS){
 Statement stmt = null;
 Connection conn = null;
 try {
 conn = getConnection();
 conn.setAutoCommit(false);
 stmt = conn.createStatement();
 stmt.execute("insert into KUMAR(DETAILS) values ('"DETAILS"')");
 //System.out.println ('"DETAILS"');
 conn.commit();
 stmt.close();
 conn.close();
 } catch (Exception e) {
 System.err.println("Error: " + e.getMessage());
 e.printStackTrace();
public Connection getConnection() throws Exception {
 String driver = "com.ibm.db2.jcc.DB2Driver";
 String url = "jdbc:db2://172.17.4.24:50000/SAMPLE";
 String username = "miracle";
 String password = "sairam";
 Class.forName(driver);
 Connection conn = DriverManager.getConnection(url, username, password);
 return conn;
but we are getting the following error:Linkage error occurred when loading class JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (http://FILE2JDBC_US, 7d7b3141-f4d1-11dc-b25e-d5d5c0a80198, -1)
Start of test
LinkageError at JavaMapping.load(): Could not load class: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge
java.lang.NoClassDefFoundError: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (wrong name: XiMappingDB2/com/xi/test/NameMerge) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170).
please solve this issue.

Uday,
May be you have uploaded class file into external definitions.
You need to Zip the class file into .jar and then upload into external definitions of integration repository
Regards,
Kiran Bobbala

ABAP Mapping :: for multi files

Dear Experts,
We are doing an Idoc to file interface, using ABAP mapping.
This is 1:n mapping i.e receiver message interface is 0..unbounded.
We have achieved the mapping for 1:1. But when I test for multi, i get an error in moni saying
Parsing error after multi mapping.Expected Message instead of Item
Item is the name of the node that has to be created multiple times.
Has anyone done multi mapping in ABAP?? Any idea why this error....may be we are missing something.
Any idea as to how we can progress???
Thanks in advance
Regards
Shobha

Hi,
Surely u can use an ABAP mapping for this.
Sounds like your problem is your not using correct output structure for multi mapping.
As with any type of multi mapping your structure should reflect this. Your target payload must thus have the following structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <unboundedPayload/>
 </ns0:Message1>
</ns0:Messages>
The <unboundedPayload> element in above should of course be replaced with your actual payload - I believe 'Item' in your case, if that is in fact the root node of your actual payload.
Regards,
Daniel

Validating against schema file for the output XML file

Hi,
I am using XSLT for mapping. The output message is generated according to the mappings but it is not validate aganist schema of target . I am using xsd file from external defination section as target. Can any body help me in this regard.
Thanks,
Mallikarjun.M

hi,
if you talk about the schema of a target message type
than validation only works if you use graphical
message mapping
not with: xslt,java, abap
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Regarding Value Mapping

Hi,
Iam doing a scenario which deals with value mapping,and there are duplicate values in destination for different sources.I have created a Group for all repeating values in destination,and i have used that name to map for different sources.But my scenario is not working as desired.What do i do?

Hi
You may not be using value mapping for its intended purpose. It should be used to map between different ID schemes for the same entities, such as companies, persons etc. An ID for such an entity must always be unique, or it would be of no good use. And then you cannot have duplicate target values, because you would then get an ambiguity if you were to map in the other direction.
But sometimes you really need value mappings just in order to make something configurable rather than hard coded into a message mapping. This is when you run into this sort of problem. For example:
Jim -> Manager
Bob -> Employee
Sue -> Employee
The job title is NOT an ID, and certainly not unique. As you can see you cannot map backwards from "Employee" to a unique target value.
I think you might be better off using the mapping lookup API. If you don't want to go this way, you could of course do a hack, such as
Jim -> Manager_1
Bob -> Employee_1
Sue -> Employee_2
and then afterwards remove the underscore + suffix.
Regards
Jorgen

Mapping for Sales Order Idoc

Hi Experts,
I am facing problem with mapping for standard SalesOrder Idoc ORDERS.ORDER05.
My Source Structure is: X12 EDI850
<G_SPO1> (occrance 1..100000)
<S_PO1> (occurance is 1..1)
 <D_234/>
 <D_234_2/>
 <D_234_3/>
 <D_234_4/>
 <D_234_5/>
 <D_234_6/>
 <D_234_7/>
 <D_234_8/>
 <D_234_9/>
 <D_234_10/>
</S_PO1>
</G_SPO1>
Target Structure is:
E1EDP01
 --->E1EDP19
 --->IDTNR
Functionality is passing material numbers of EDI customers to IDTNR field in E1EDP19 filed under segment E1EDP01.
From source i will get set of material numbers, for one set 10 material numbers(In source you can find 10 fields for 10 material numbers)
Requirement: I need to send those material numbers to IDTNR (One to one mapping ).
For getting 10 material numbers i just duplicated segment E1EDP19 in target side and mapped one field of source to IDTNR target in each segment. Totally mapped 10 source fields in 10 segments.
If 20 material numbers I will get two sets <G_SPO1> will repeat two times, each time 10 material numbers. So I mapped G_SPO1 to E1EDP01
S_PO1 to E1EDP19.
My out put is coming as 10 E1EDP19 segments under E1EDP01 if 10 materail numbers.
But problem is ECC team asking to get one E1EDP19 line item value under E1EDP01 line item header. They are not accepting duplicate E1EDP19 segments under header E1EDP01.
How to acheive this with my requirement.
Appreciate your hellp on this.
Thanks & Regards,
A.Neelima.

There is no relation between D_234 and D_356.
I want to pass D_356 to KTEXT in all E1EDP01 segments which ever i will get based on the condition we implemented for E1EDP01.
Present its coming only for E1EDP01 first segment (for which i used condition with D_234), its not coming for remaining 9 E1EDP01 segments (for which i used conditions with D_234_2 to D_234_10)
If i pass sample input payload:
<S_ST>
<S_PID>
<D_350>Description</D_350>
</S_PID>
<G_SPO1>
<S_PO1>
<D_234>1</D_234>
<D_234_2/>2</D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
<G_SPO1>
<S_PO1>
<D_234>3</D_234>
<D_234_2>4<D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
</S_ST>
Coming Output Now: (KTEXT field is missing in last two segments)
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
</E1EDP19>
</E1EDP01>
Expected Output:
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
Thnaks & Regards,
A.Neelima.

Generate spool req number for report output list

Hi,
How to generate spool request number for report output list while executing the report.Please provide if you have any sample code.
Thanks and Regards,
BSR.

HI srinivas,
welcome to sdn.
Exporting the Contents of a Spool Request
Use
You want to export the content of a spool request in one of the following ways:
·        As a text file to the SAP GUI working directory
·        Unconverted or as a table, RTF, or HTML to a directory of your choice
·        As a PDF file to a directory of your choice
Procedure
Follow the procedure below:
Exporting to the SAP GUI Working Directory
If you are exporting large quantities of data, downloading the spool request as a text file to the SAP GUI working directory is a good solution.
Choose Spool Request ® Forward® Export as Text.
The entire text is stored in your SAP GUI working directory in ASCII format.
A file of this type is named using the following pattern:
.txt
Example: ABC0000004327.txt
You require appropriate authorization for this function from your administrator.
Exporting Unconverted or as a table, RTF, or HTML to a Directory of Your Choice
With this method of exporting a spool request, the content of the spool request is first displayed, and you then download the content in the format of your choice to a directory of your choice.
       1.      Select the spool request to be exported and choose Display Contents.
       2.      In the case of SAPscript/Smart Forms documents, activate list display by choosing Goto.
       3.      Choose System ® List ® Save ® Local File.
       4.      Choose one of the available formats and confirm your choice.
       5.      Choose a directory and save the spool request.
By default, only the first 10 pages of a spool request are saved in a file. You can increase the number of pages to be saved by choosing Goto ® Display Requests ® Settings and making the desired entries in the Display Area group box.
Exporting as a PDF File
You want to export the contents of a spool request as a PDF file to a directory of your choice, and print the file as required. The PDF file contains the print data in the format in which it would be output by the printer.
The following procedure is irrelevant for the printing of PDF-based forms, since a PDF file is already returned with this method. See also Displaying and Printing PDF-Based Forms.
You also require authorization from your administrator to run this report.
The PDF file is generated as follows with report RSTXPDFT4:
       1.      Generate a spool request from the document to be printed.
       2.      In transaction SE38, start report rstxpdft4.
       3.      In the displayed window, enter the spool request number and the directory in which the PDF file is to be stored.
Leave the Download PDF File option selected.
Choose Execute.
       4.      In the next window, you can confirm or change the path in which the file is be stored.
Save your entries.
       5.      The system displays a log from which you can see whether the report was successfully performed.
You can then open the file from the directory and print it as required.
Restrictions for Exporting as a PDF File
·        The PDF conversion only supports true bar codes for Smart Forms, which were generated with the new bar code technology as of SAP NetWeaver 04. In all other cases, the bar code is only simulated.
·        PDF conversion, especially of ABAP lists, is slower and is therefore not suitable for mass printing. However, you can speed up the conversion to PDF using the FASTLISTCONV option in report RSTXPDF3.
·        The font selection for ABAP lists is predefined in the PDF converter and cannot be changed.
For more information about constraints, see SAP Note 323736 in the SAP Service Marketplace
see this links
http://help.sap.com/saphelp_40b/helpdata/en/d9/4a98f351ea11d189570000e829fbbd/content.htm
http://web.mit.edu/SAPR3/docs/webdocs/reports/rpRFprint.html
regards
shankar
reward me if usefull

Error While Saving Mapping For A Dimension

I am getting The Error While Saving The mapping For a Dimension
Any Clue?
An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
not exist.
Thanks
Raghu

Check the OSS note 550760 regarding the issue.

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Driver Program Name for Shipment output form

Hi guru's
can anyone tell me wats the name of the driver program and the form name for a shipment output form?(for ABAP development purpose)
Thanks in advance,
Regards/Aryan

Hi Aryan - What Shipment output are you referring to? LD01-Delivery Note? There are some more, which are associated with Transportation application as well.
LD01 - V2 - Program SDADDN02. Form SD_DELNOTE_SUPPL
LD00 - V2 - Program YMRVADDN01/RVADDN01 Form ZMLWMRVDELNOTE(customized our side)/RVDELNOTE
Pl00 - Packing List -V2 - Program SDPACKLI, Form SD_PACKING_LIST
CMR1 - Bill of lading - V7 - Progarm RVADTR01 Form SD_SHIPMENT_CMR.
Best way, use transaction V/34 to view all V2 - Shipping output types and the associated program and form. V/82 to view all V7-Transportation output types and the associated program/forms.
Thanks
Nikhil

Question about key mapping for bank data in SP3 standard Vendor Repository

Hello Colleagues:
The situation is the following:
1) MDM Standard vendor repository does not use Key Mapping for the qualified table data "Bank Details". This makes sense because normally you would pay a vendor in the same account and bank regardless of the company or R/3 system you are paying him from.
2) However, here in my project customer don't have the same bank data for all of the 3 R/3 Systems. Furthermore, they would like to pay a vendor in a diferent bank and account number; depending on where the payment is generated (Company or R/3 system).
Because of this, I though about creating a lookup table for the banks which would use key mapping. I did this and I had no trouble importing bank data in to it.
Now I have this tables:
1) Banks: Lookup Flat:
Country and Bank Key as display fields.
2) Bank Details: Qualified Flat:
2.a) Field "Bank" as a non-qualifier display lookup field which points to a record on "Banks" table (Described in number 1).
2.b) The rest of the fields (Account number, Account holder, Reference, etc.) as qualifier non-display fields.
This aproach works well in data manager.
However, when I try to import vendors from R/3, I'm not being able to map the bank details, not even with "compound field" functionality, because I cannot map the display fields in the "Banks" lookup table (Described in number 1); in the "Map Fields/Values" tab in the Destination fields pane, it won't show any fields from this table.
Also, I'm not very sure if I will be able to syndicate this data back to the R/3 systems correctly, this is; replicate only the banks which exist on each R/3 client system.
Any ideas on how to solve this problem? Please help.
Best Regards,
Jorge.

... Where
did Terminal's default keystrokes (e.g., Esc,[5C for
ctrl-right-arrow) come from? They just produce
annoying beeps in bash. Are they standard sequences
for some shell that I don't know about? I
Somewhere deep in the bowels of computer history....for example
http://vt100.net/docs/vt100-ug/table3-6.html
http://www.termsys.demon.co.uk/vtansi.htm#cursor
that is to say, these codes date back to early hardware terminals such as the VT100. I believe. And that is why Terminal is a member of a class of software called "terminal emulators".

How to extract error message for each output type.

Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?

Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn

Creation of Import Map for Business Partners

Hello Guru's,
Can anyone guide me how to create import maps for Business Partners please , we use Text files.
Thanks in advance
Regards
Srihari

Hi srihari ,
Kindly refer to the below links for some further help in this area:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_mdm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303335373733%7d
/people/satyajit.chakraborty/blog/2009/01/15/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-i
/people/satyajit.chakraborty/blog/2009/01/16/central-mdm-business-partner-creation-scenario-with-galaxy-bpm--part-ii
Hope It Helped
Thanks & Regards
Simona Pinto

Regarding Sements Mapping for desired output

Similar Messages

Maybe you are looking for