Regarding setting external breakpoint

Hi experts,
I am using a rfc adapter to call a rfc in my ABAP from XI.
Can any one tell me how i can keep a breakpoint so that i can debug the rfc when it is being called from XI ?
Regards,
Vignesh

Hi Vignesh,
I dont think ...that kind of debugging will work...
why dont you test the RFC itself in R/3... using some test data....
if that works...it will surely work when XI calls it...
Just make sure ...
1. The data is passed using correct parameter names in the call
2. The name of the RFC shuld be in all CAPS...
3. The RFC should be Remote Enabled.... (Check in the attributes tab in FM)
**Reward points if helpful
Regards,
Sushil.

Similar Messages

External breakpoints not working

Hi,
I am working on a CRM 7.0 (SAP_ABA 7.01 SP 6) system and my external breakpoints are not working.
If I set an external breakpoints for my user in a component method or HTML page and I log onto the CRM Web UI
the system hangs. The same happens if I switch on the debugging directly in the component
without breakpoints. I have the same behavior for breakpoints in Web Dynpro code, when I try to execute a WD application.
Breakpoints in ABAP reports are working fine, so I don't think it's a problem of authorities or roles, should be something
with the HTML debugging. I worked on other SAP CRM 7.0 systems before and never had this problem before.
Somebody can help or has an idea?!
Thanks.
Best regards,
Oliver
Edited by: Oliver Pregler on Aug 6, 2010 1:57 PM
Edited by: Oliver Pregler on Aug 6, 2010 1:58 PM

Hi Oliver,
Which component and view u are setting the break?
Are u sure that u are setting external break-point?
Is there any error/exception?
Try to set and infinite loop and debug using trx. sm50. If ur scenario is totaly standard create an enhacement point to set the infitine loop.
DO.
if sy-subrc eq 123.
exit.
endif.
ENDDO.
Hope with the code above u be able to debug.
Best regards,
Caíque Escaler

Problem with external breakpoint in RFC in CRM box

Hi All
I have created a RFC FM to create new realtionship in CRM Box which is being called from Web portal. The issue is that when I set a external breakpoint in this RFC , two debugging sessions are getting created . In 1 session it creates the realtionship successfully and i can see the return table but then it goes to another session and finally displays msg "Relationship already exists". The relationship is getting created properly but the user will get to see wrong msg on the portal screen.
Can anybody suggest as to what could be the problem.
Regards
Babita

[enterprise portal in SAP CRM|http://sapcrmlearn.blogspot.com/2009/02/enterprise-portal.html]

ABAP Debugger: assign user to external breakpoint

Hi, when I assign different users to an external breakpoint the program still stops when it is executed with the "original" user which is not assigned to the BP anymore. Has anybody any solution for this behavior?
The procedure I use is the following: SE80-> utilities -> settings -> debugging.
FYI: The message in the status line shows the correct user when the external BP is created.
thanks a lot in advance and best regards,
Flo

Hello friend,
Goto Utilities in that you have options called Break Points and external break points. Just check that and see whether the break point table is clear or not.
Else check whether have you set the match point or any other settings which can stop the program.
I think the program stops because there must be any thing set by you unknowingly so try to check that. Don't think that break point is the only option to stop the code and work in that perspective.
Still your problem persists again post.
Thanks,
Sri Hari

Gateway RFC External Breakpoint Issue

Hi all,
I have used the generator tool on an RFC and I am trying to set an external breakpoint in my RFC code.
I have set my user name in debugging and I have also activated everything needed in SICF but the breakpoint is still not working.
Does anyone have any advice on this?
Thanks in advance,
Megan

HI Megan,
   I never had this problem in my system but you can try using SAAB transaction to create a checkpoint group.
In your code insert this istruction:
LOG-POINT ID [SAAB ID created in SAAB transaction] SUBKEY 'LOG_POINT'
                       FIELDS sy-uname
to understand if your service is correctly called and which user is performing the call .
See these two links:
Help: http://help.sap.com/saphelp_erp60_sp/helpdata/EN/aa/a6b241a1b33131e10000000a155106/frameset.htm
WebLog: /people/andrea.olivieri/blog/2011/11/09/checkpoint-group-the-powerful-friend-of-every-abaper-but133beware
               How to Instrument Your ABAP Code With Checkpoint Groups
I hope that I helped you.
Regards
Fabio

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Time machine osx 10.6.8 problem slow backupd CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary. mdworker32 kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Hello Guys I have a problem that I can not get to the bottom.
Time Machine has suddenly stopped working it really slow to make up. Copy a few kb at a time and long hours it takes to close the back. (up to a few tens of megs, 10, 20 Mb).
I made the following list of tests that will follow along with the log file.
First of all I made a copy as root with Carbon Copy Cloner disk of the iMac. (So that they can go back in case of disaster)
Following the guides Pondini (pondini.org) I did the following steps:
1) Changed the internfaccia FW800 to USB hard drive (does not change anything, still slow)
2) Changed to another external HD for time machine with FW800 and USB (nothing changes still slow)
3) Recreated the full backup with Time Machine on either drive (still slow)
4) Reinstalled the 10.6.8 Combo Pack (still slow)
5) Re spootlight indexed with the disk (still slow)
6) At this point, in desperation I reinstalled on the internal drive of my iMac 10.6.8 creating a new user, User Migration Assistant from my hd clone with Carbon Copy Cloner. Recreated the full backup with Time Machine.
The first full backup is fast, but slow incremental backups are back (as to 'start a few kb at a time).
I compared the log files with those of my other machine with same configuration and I found these errors:
backupdir [19376]: CFPropertyListCreateFromXMLData (): Old-style plist parser: missing semicolon in dictionary.
mdworker32 [20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
You know help me? I saw that this error is from 10.5 to 10.7, but no one has found a real solution to the issue.
I never installed antivirus software and tried with different external drives COPN capacity equal to or greater than the external drive. Only at the end I tried to divide the external drive to back up into two parts by a 1.5 TB and 500 GB but with the same mistakes that I have described.
thanks
Stefano
Ciao Ragazzi ho un problema a cui non riesco a venire a capo.
improvvisamente time machine ha smesso di funzionare va veramente lento a fare backup. Copia pochi kb alla volta e impiega tanto tempo ore per chiudere il backup. (backup di poche decine di mega, 10, 20 Mb).
Ho effettuato le seguenti prove che vi elenco di seguito insieme al file log.
Prima di tutto ho fatto una copia come utente root con Carbon Copy cloner del disco del imac.(in maniera tale di poter tornare indietro in caso di disastro)
Seguendo le guide di Pondini (pondini.org) ho effettuato i seguenti passaggi:
1) Cambiato internfaccia del disco rigido da FW800 a USB (non cambia nulla, sempre lento)
2) Cambiato hd esterno con un altro per time machine con FW800 e USB (non cambia nulla sempre lento)
3) Ricreato il full Backup con time machine su entrambe i dischi (sempre lento)
4) Reinstallato il Combo pack 10.6.8 (sempre lento)
5) Re indicizzato con spootlight il disco (sempre lento)
6) A questo punto preso dalla disperazione ho reinstallato sul disco interno del mio imac il 10.6.8 creando un nuovo utente, Assistente migrazione utente dal mio hd clonato con Carbon copy cloner. Ricreato il backup completo con time machine.
Il primo full backup è veloce, ma i backup incrementali sono tornati lentissimi (come all' inizio pochi kb alla volta).
Ho confrontato il file log con quelli di un mio altro mac con la stessa configurazione ed ho trovato questi errori:
backupd[19376]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
mdworker32[20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sapete darmi aiuto? Ho visto che questo errore è presente dal 10.5 al 10.7 ma nessuno ha trovato una vera soluzione alla questione.
Non ho mai installato software antivirus ed ho provato con diversi dischi esterni copn capacità uguale o superiore al disco esterno. Solo alla fine ho provato a dividere il disco esterno del backup in due parti una da 1,5TB e una da 500 Gb ma con i medesimi errori che vi ho descritto.
grazie
Stefano
File LOG:
Jan 9 00:31:37 ihomez newsyslog[19803]: logfile turned over
Jan 9 00:33:26 ihomez com.apple.backupd[19376]: Copied 534.0 GB of 1020.2 GB, 649387 of 1786353 items
Jan 9 01:33:27 ihomez com.apple.backupd[19376]: Copied 728.3 GB of 1020.2 GB, 805293 of 1786353 items
Jan 9 02:33:27 ihomez com.apple.backupd[19376]: Copied 938.5 GB of 1020.2 GB, 807979 of 1786353 items
Jan 9 02:55:58 ihomez com.apple.backupd[19376]: Copied 808871 files (1012.7 GB) from volume i5 2TB.
Jan 9 03:08:03 ihomez com.apple.backupd[19376]: No pre-backup thinning needed: 100.0 MB requested (including padding), 383.44 GB available
Jan 9 03:10:13 ihomez backupd[19376]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 03:27:54 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sampling process 12446 for 5 seconds with 10 milliseconds of run time between samples
Jan 9 03:27:59 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sampling completed, processing symbols...
Jan 9 03:28:00 ihomez mds[19366]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Jan 9 03:28:00 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sample analysis of process 12446 written to file /Users/home/.dropbox/s4f0a50aa
Jan 9 03:33:30 ihomez com.apple.backupd[19376]: Copied 717781 files (13.0 MB) from volume i5 2TB.
Jan 9 04:06:38 ihomez com.apple.backupd[19376]: Starting post-backup thinning
Jan 9 04:06:38 ihomez com.apple.backupd[19376]: No post-back up thinning needed: no expired backups exist
Jan 9 04:06:39 ihomez com.apple.backupd[19376]: Backup completed successfully.
Jan 9 04:33:45 ihomez com.apple.backupd[20287]: Starting standard backup
Jan 9 04:33:46 ihomez com.apple.backupd[20287]: Backing up to: /Volumes/Time Machime LA/Backups.backupdb
Jan 9 04:33:46 ihomez mds[19366]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Jan 9 04:40:18 ihomez com.apple.backupd[20287]: No pre-backup thinning needed: 100.0 MB requested (including padding), 382.47 GB available
Jan 9 04:59:25 ihomez backupd[20287]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 05:31:48 ihomez com.apple.backupd[20287]: Copied 720482 files (13.0 MB) from volume i5 2TB.
Jan 9 05:45:22 ihomez com.apple.backupd[20287]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.98 GB available
Jan 9 06:05:14 ihomez backupd[20287]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 06:32:57 ihomez com.apple.backupd[20287]: Copied 12.7 MB of 12.7 MB, 538084 of 538084 items
Jan 9 06:36:52 ihomez com.apple.backupd[20287]: Copied 717781 files (12.7 MB) from volume i5 2TB.
Jan 9 08:12:05 ihomez mds[19366]: (Normal) DiskStore: Creating index for /
Jan 9 08:12:30 ihomez System Preferences[20910]: Preference bundle "/Users/home/Library/PreferencePanes/Archives.prefPane" is misplaced, ignoring...
Jan 9 08:12:32 ihomez System Preferences[20910]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:\n    /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
Jan 9 08:12:32 ihomez System Preferences[20910]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x20056cb80 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
Jan 9 08:23:40 ihomez mdworker[20945]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Jan 9 08:23:46 ihomez mdworker32[20948]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:23:52 ihomez mdworker32[20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:30:47 ihomez com.apple.Finder[225]: Failed to send message to backup server: error = -2
Jan 9 08:30:41 ihomez com.apple.backupd[20287]: Starting post-backup thinning
Jan 9 08:30:49 ihomez com.apple.backupd[20287]: No post-back up thinning needed: no expired backups exist
Jan 9 08:30:51 ihomez com.apple.launchd[1] (0x1001017c0.mach_init.mdworker[20949]): Exited: Killed
Jan 9 08:35:39 ihomez mdworker[20959]: (Normal) Import: Spotlight giving up on importing file /Users/home/Desktop/testdisk-6.11.3/recupero/recup_dir.34/f2515784.abcdp after 240.256 seconds, 239.841 seconds of which was spent in the Spotlight importer plugin.
Jan 9 08:35:39 ihomez com.apple.launchd[1] (0x1001017c0.mach_init.mdworker[20959]): Exited with exit code: 75
Jan 9 08:36:55 ihomez com.apple.backupd[20287]: Backup completed successfully.
Jan 9 08:37:17 ihomez mdworker32[20974]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:39:36 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 08:41:09 ihomez mdworker[20969]: Corrupt JPEG data: 10053 extraneous bytes before marker 0xed
Jan 9 08:41:37 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: zip importer encountered an error (3) scanning "/Users/home/Downloads/Griffin Seconda serie.zip".
Jan 9 08:45:44 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: FontImporter: Validation failed - "/Users/home/Library/Fonts Disabled/MT Extra".
Jan 9 08:45:44 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: FontImporter: Validation Result - "<CFArray 0x10204f310 [0x7fff70eaeee0]>{type = mutable-small, count = 5, values = (\n    0 : <CFString 0x102762af8 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityInformation"}\n    1 : <CFString 0x102762b18 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityTechnicalError"}\n    2 : <CFString 0x102762b58 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityMajorError"}\n    3 : <CFString 0x102762b78 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityFatalError"}\n    4 : <CFString 0x102762b38 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityMinorError"}\n)}".
Jan 9 08:45:55 ihomez mdworker[20969]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Jan 9 08:46:09 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:03:32 ihomez mdworker[21011]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:04:02: --- last message repeated 5 times ---
Jan 9 09:05:15 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:05:43 ihomez mdworker32[21036]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:05:44 ihomez mdworker[20969]: iCal.mdimporter: could not parse ICS file: /Applications/Microsoft Office 2008/Office/EntourageCore.framework/Versions/12/Resources/it.lproj/Timezones.ic s
Jan 9 09:13:28 ihomez mdworker32[21053]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:16:17 ihomez mdworker32[21074]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:33:45 ihomez com.apple.backupd[21102]: Starting standard backup
Jan 9 09:33:46 ihomez com.apple.backupd[21102]: Backing up to: /Volumes/Time Machime LA/Backups.backupdb
Jan 9 09:40:46 ihomez com.apple.backupd[21102]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.68 GB available
Jan 9 09:57:57 ihomez backupd[21102]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 10:29:58 ihomez com.apple.backupd[21102]: Copied 718890 files (12.9 MB) from volume i5 2TB.
Jan 9 10:43:35 ihomez com.apple.backupd[21102]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.48 GB available
Jan 9 11:02:16 ihomez backupd[21102]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 11:31:08 ihomez com.apple.backupd[21102]: Copied 12.7 MB of 12.7 MB, 642967 of 642967 items
Jan 9 11:33:07 ihomez com.apple.backupd[21102]: Copied 716189 files (12.7 MB) from volume i5 2TB.
Jan 9 13:26:26 ihomez com.apple.backupd[21102]: Backup deletion was canceled by user
Jan 9 13:26:26 ihomez com.apple.backupd[21102]: Starting post-backup thinning
Jan 9 13:26:27 ihomez com.apple.backupd[21102]: Backup completed successfully.

Thanks for the quick response.
I followed the steps you listed and also remove the files that were creating problems spootlight, including the audio plugin and the panel preferences file.
Then I stopped by the timemachine reindexed spootlight 'option in the preferences panel spootight privacy. After I restarted my iMac and formatted the external drive again, Time Machine and restarting a full backup. This morning after a quick full backup and disk indexing completed incremental backups are always slow. Proceeds with a few kb at a time. I resend you the log files and screen capture. My iMac is constantly backed up.
Thank you for your time.
Stefano
File log:
Jan 10 00:30:05 ihomez newsyslog[757]: logfile turned over
Jan 10 00:43:30 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling process 278 for 5 seconds with 10 milliseconds of run time between samples
Jan 10 00:43:35 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling completed, processing symbols...
Jan 10 00:43:35 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sample analysis of process 278 written to file /Users/home/.dropbox/s4f0b7ba2
Jan 10 00:44:08 ihomez mdworker32[805]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:00:51 ihomez mdworker[579]: -[ABAddressBook sharedAddressBook] Can't ABACQUIRE_FILE_LOCK /SourceCache/AddressBook/AddressBook-883/Framework/AddressBook/ABAddressBook.m: 3314
Jan 10 01:04:41 ihomez osascript[897]: Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/QXPScriptingAdditions.osax"
Jan 10 01:07:56 ihomez mdworker32[930]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:08:01 ihomez mdworker32[931]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:09:44 ihomez com.apple.backupd[479]: Copied 94.7 GB of 990.4 GB, 506176 of 1771170 items
Jan 10 01:13:34 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling process 278 for 5 seconds with 10 milliseconds of run time between samples
Jan 10 01:13:39 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling completed, processing symbols...
Jan 10 01:13:39 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sample analysis of process 278 written to file /Users/home/.dropbox/s4f0b82ad
Jan 10 01:14:19 ihomez mdworker32[946]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:20:02 ihomez mdworker32[969]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:00:16 ihomez mdworker32[1025]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:09:44 ihomez com.apple.backupd[479]: Copied 316.2 GB of 990.4 GB, 530801 of 1771170 items
Jan 10 02:10:51 ihomez mdworker32[1052]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:11:00 ihomez mdworker[937]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 02:15:01 ihomez mdworker[937]: Corrupt JPEG data: 10053 extraneous bytes before marker 0xed
Jan 10 02:15:37 ihomez mdworker32[1063]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:30:55 ihomez mdworker32[1098]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:38:32 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[937]: FontImporter: Validation failed - "/Users/home/Library/Fonts Disabled/MT Extra".
Jan 10 02:38:32 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[937]: FontImporter: Validation Result - "<CFArray 0x10256a570 [0x7fff70e20ee0]>{type = mutable-small, count = 5, values = (\n    0 : <CFString 0x104eb5af8 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityInformation"}\n    1 : <CFString 0x104eb5b18 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityTechnicalError"}\n    2 : <CFString 0x104eb5b58 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityMajorError"}\n    3 : <CFString 0x104eb5b78 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityFatalError"}\n    4 : <CFString 0x104eb5b38 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityMinorError"}\n)}".
Jan 10 02:38:55 ihomez mdworker[937]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 02:38:56 ihomez mdworker32[1115]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 03:09:44 ihomez com.apple.backupd[479]: Copied 517.9 GB of 990.4 GB, 651137 of 1771170 items
Jan 10 04:09:45 ihomez com.apple.backupd[479]: Copied 723.7 GB of 990.4 GB, 787449 of 1771170 items
Jan 10 05:09:46 ihomez com.apple.backupd[479]: Copied 947.2 GB of 990.4 GB, 789860 of 1771170 items
Jan 10 05:20:55 ihomez com.apple.backupd[479]: Copied 790597 files (982.2 GB) from volume i5 2TB.
Jan 10 05:32:32 ihomez com.apple.backupd[479]: No pre-backup thinning needed: 1.60 GB requested (including padding), 873.52 GB available
Jan 10 05:33:14 ihomez mdworker[1452]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:35:07: --- last message repeated 5 times ---
Jan 10 05:35:36 ihomez backupd[479]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:35:45 ihomez mdworker[1475]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:59:42 ihomez com.apple.backupd[479]: Copied 699486 files (1.9 MB) from volume i5 2TB.
Jan 10 06:34:52 ihomez com.apple.backupd[479]: Starting post-backup thinning
Jan 10 06:34:52 ihomez com.apple.backupd[479]: No post-back up thinning needed: no expired backups exist
Jan 10 06:34:52 ihomez com.apple.backupd[479]: Backup completed successfully.
Jan 10 07:10:09 ihomez com.apple.backupd[1752]: Starting standard backup
Jan 10 07:10:09 ihomez com.apple.backupd[1752]: Backing up to: /Volumes/TimeMachine LA/Backups.backupdb

How can I set a breakpoint for a BAPI call in SE37?

Hi,
I am trying to debug a BAPI call from an external system in R/3 4.6C.
In SCM4.1, the SE37 transaction has an aoption under Utilities->Settings ABAP Editor/Debugging tab to activate external debugging. But in R/3 4.6C no such tab exists.
Is there any other way of doing this in R/3 4.6C?
Thanks,
Chris Brookes.

Hi,
Unfortunately I cannot chage the source code of the FM since it is not a development system so I cannot insert a BREAKPOINT statement.
Also, just setting a breakpoint in SE37, even if logged in as the same user who calls the BAPI does not work.
Btw, the call to the BAPI is done via .NET.
It seems that SE37 in R/3 4.6C just doesn't have the same options as in SCM4.1.
Any other ideas?
Thanks,
Chris Brookes.

Starting abap debugger without an external breakpoint

Can anyone let me know if i can start an new debugger session on any action in the browser without setting an external breakpoint in the code (something similar to /h ).
Thanks ,
Kiran

Not currently in 7.0 or 7.01. However in 7.02 such a feature was added as a URL parameter. The url parameter is /H=X as a tribute to long time ABAP developers
You can then activate debugger via the context menu:
http://www.flickr.com/photos/tjung/4563357958/
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/0d/5c8fd973154cc7b5772c01eea9a164/frameset.htm

How to debug using External Breakpoint

Hello,
I am using external breakpoint in system B.
I am running a program in systemA which updates table in systemB through programB.
I am using RFCuser to login to system B.
Currently it is not going in debugging mode in program B.
KIndly suggest what needs to be done?

You need to do the following.
1. Identify the userid you are using for the RFC session.
2. While in the ABAP editor, go to Utilities->Settings
3. Ensure that you are in the tab 'Abap Editor'
4. Under the tab 'Abap Editor' go to the tab 'Debugging'
5. Ensure that the user name entered there is the one identified in step 1.
6. Set the external breakpoint
7. Logon to the target system.
At this stage, when you start the external transaction, it should stop where you set the breakpoint.

System time was set externally in the past.

Hi Gurus,
In our production system,several warning messages have come up System time was set externally in the past. Wait 1 second(s).
But when i checked the system time it showing the same as OS's.
Could you please throw some information around this and how these warnings can be avoided?
Thanks
Sabya
BASIS ENTHUSIAST

Hi Sabyasachi,
What's your OS Version?
Is your SAP application hosted on Windows Server.
Please check-out SAP Note-447839.
Also to brief you about this common issue where in sometimes the OS time is reset back in the past and the SAP application observes this an warning and in severe situations as an ABAP dump.
On windows server, if the automatic synchronization of timezone is enabled it synchronizes to a master time server. Actually this should be fine, but in case of Windows server, what happens is that every time the synchronization happens from a master time server, the SAP server gets a hard reset i.e. Sudden decrease of time at the time of synchronization like from 11:45 AM to 10:45 AM. This kind of behavior affects the applications running on the server. This should have been soft reset i.e. 11:45 AM time should go back in time in fractions over the entire week (Soft Reset) until it is synced in real time. SAP applications running on windows server implemented with Hard reset of Time are absolutely not supported and in that case the hard reset must be refrained at all costs. Refer SAP Note 447839 for further details.
To narrow down the root cause of OS time shifts you can run a watchdog tool SAP time trace tool which logs the OS time every 5secs, so the next time whenever this occurs in the system it can be investigated what happened to the OS time at that instance.
If the described case matches with your scenario, you can disable the Automatic time synchronization feature on the windows server.
Regards,
Akshay

External Breakpoints

Hi Everyone,
I am not sure if this should be posted in the ABAP forums or Basis forum. I finally decided to post in the ABAP Forums as i thought ABAPers would be having a better idea of what the issue is .
I need to debug a function module. I am not sure what calls this function module, the only thing I am sure of is that it is called when clicking a button in BSP. Previously, I used to debug Webdynpro code by using "External Breakpoints". However, I was not able to find any option to enable external breakpoints.
I was just wondering, if the external breakpoints option could be restricted via Basis authorizations. If so, how could I enable them. Also, Also, is there any way i can get the debug screen after i run the BSP application.
Thanks in advance for any help and suggestions.
Cheers,
Mz

Hi All,
I think that the authorizations could be related to the user... In my program, I tried to debug using an infinite loop as suggested by Matt Earlier.
This went fine until I reached a particular FM which looked like below.
CALL FUNCTION 'Z_CPR_CREATE_CPROJECT_NEW'
      DESTINATION zcl_r_00=>sv_cpr_logsys_com
      EXPORTING
        is_attributes    = ls_cpr_attributes
        iv_template_guid = lv_template_guid
        it_stkhldr       = is_attributes-rpm_project_stkhldr
        it_folder        = ls_fold_api
        iv_commit        = cl_rpm_co=>sc_true
      IMPORTING
        ev_cpr_guid      = ev_cpr_guid
      TABLES
        return           = return.
When I try to go into the FM, using F5, the program just doesn't go in. Destination zcl_r_00=>sv_cpr_logsys_com is specified using a system user (ABAPSYS)....
any Idea how I can debug this. I tried getting SAP_ALL from Basis but still this has no effect.
I also tried changing the RFC destination to take my ID by checking the current user checkbox in the RFC destination..
This crazy issue has me going round in circles literally.
Please let me know if you have any suggestions and if you require any feedback from me.
Thanks in advance to All.
Best Regards,
Mz

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

I can't figure out how to set a breakpoint in a SenTestingKit unit test

I'm learning Cocoa after decades of doing other languages. I'm trying to use SenTestingKit for unit tests. One of my unit tests doesn't work, and I want to set a breakpoint to figure out why. So far, I haven't figured out how to do this.
I found Chris Hanson's instructions for how to do this, but he apparently wrote them for an earlier version of Xcode, and I don't know enough to adapt them.
I am writing a tutorial document for writing a simple Cocoa App using Xcode 3.1, git, SenTestingKit, and OCMock. It's at http://xorandor.com/FirstCocoaApp. I've got it up to the point of trying to debug a unit test, and I'm stuck there.
I also couldn't figure out how to have Xcode run the unit tests while building the application. Again, Chris' instructions didn't quite do it, and I don't know enough to figure out the rest.
So, if you know how to do this, please give me some hints. I'll put those into my tutorial, so that the next people who need this can find it.
Thanks,
Pat

I figured out more of my problem, but I haven't solved it yet.
What happens is that, after I create a test case, I try to run it with a breakpoint. After I start the program, Xcode turns the breakpoint from blue (meaning active) to orange (meaning that it can't set the breakpoint).
Several people have said to turn off the Lazy symbol loading preference. I did that, and that didn't fix the problem.
I wrote up a detailed list of steps that I took at http://www.xorandor.com/DebugQuestion.txt
I also put a copy of the project file at http://xorandor.com/MyProject.tar
If anyone has any suggestions on what to try next, please let me know.
Thanks,
Pat

How can I set up breakpoints in eclipse for jsp?

I saw somebody can set up breakpoints in eclipse for jsp.
But I can not do that on my eclipse.
What's the difference?
Thanks.

I don't think this had a keyboard shortcut even before (checked in CS6). There's an alternative though.
1. Create a JSFL file with following code and save it in the commands folder as 'Remove Tween'.
fl.getDocumentDOM().getTimeline().setFrameProperty('tweenType', 'none');
2. Now goto Edit Menu > Keyboard Shortcuts..
3. Search for 'Remove Tween' and assign a keyboard shortcut to it.
Now everytime you press the assigned key - jsfl script is executed which essentially removes the tween from selected frame. (works for Classic and Shape tween but not Motion Tweens)

Regarding setting external breakpoint

Similar Messages

Maybe you are looking for