Regarding table join in SQVI

Experts,
I want to develop one query in SQVI.
My requirement is as below.
I want to develop a query in SQVI, which will show me for which materials( of material type ZPRT in my case) for which source list doesn't exist.
For this, I am developing a query in SQVI by joining table MARA& EORD, please guide me how to proceed?
Regards,
Shailendra
Edited by: Shailendra Sabale on Jul 8, 2009 4:52 AM

Hi
It is no problem if you decide to use table MARA and EORD only, then just go to SQVI.
but for the better result you may add MARC table, since EORD table is plant specific as well as MARC table.
here we go:
- name your quick viewer --> choose "Create" button
- specify the title as you like, data source: Table Join, and choose "Basis mode" option
- insert table MARA, and EORD subsequently (check your join condition as MARA-MATNR and EORD-MATNR)
- press Back button
- on the "List. fld. select" tab, you may select field Material Type, Material Number, Account number of Vendor (EORD-LIFNR)
- on the "Selection field" you may select Material type, Material number --> as a parameter in your selection screen.
- choose Save, and Back button, and Save again if prompted.
- then you can test it (execute)
hope it helps,
rob

Similar Messages

SQVI in a loop when creating or changing table join

Hello collegues,
When creating or changing a table join in the sqvi-transaction the transaction is hanging and won't continue. So I can't create any table joins anymore in the system (dev, qas and production-system).
Earlier I could create and change them without any problems.
Can anyone help me solving this problem?
Kind regards and thanks in advance,
Bart

Hi Kamal
You could try the following:
- for the particular workflow that you are using, find the task that is responsible and then edit the description tab.
For debugging please go to transaction SE24 and set a breakpoint in CL_BBP_ACTION_NOTIFICATION_WF.
I hope this helps,
Kind Regards,
Lisa

How to use "left outer join" in SQVI

Dear ALL ,
I want to match MARA materials with BOM material table (MAST,STPO)material or Routing material table (MAPL,PLPO) and I want the list of NONMATCHING material codes from SQVI.
How to get these items which do not match in 2 tables........?
I have to work with SQVI + EXCEL ( VLOOKUP ) in excel sheet.
Thanks...

Kishore,
After selecting the table join option, In layout mode enter the table names in Joined tables tab. Select the 2 tables using check boxex and select the join type like left inner and click on define condition. This would create a left inner join. Similarly carry out for the next 2 tables.
Hope it is useful. If so reward your points.
Regards
Ram

Order Query in SQ01 using Table Joins in CRM

Hello Experts,
I am trying to create a query using table joins in SQ01 in CRM because I need a report that will give me all transactions for a selected Business Partner. I am unable to display any results when running my query. I have found other threads which give a list of possible tables to join together, but the fields used in the joins were not described.
The tables I have joined in my query are as follows:
CRMD_ORDERADM_H
CRMD_ORDER_INDEX
CRMD_PARTNER
BUT_000
I have used SE16 to try to search for additional tables to use for linking the Business Partner with a transaction, but I have been unsuccessful.
Would anyone please give advice as how to proceed?
Reward points are available!
Thank you in advance,
David

David
The link with be the GUID.
CRMD_ORDERADM_H = Document Header Table
CRMD_ORDERADM_I = Document Line item Table
CRMD_LINK = Lists various link GUIDs, to
access order Information
The Table CRMD_ORDERADM_H will contain you transactions , once you find the GUID of your sales transaction in the table CRMD_ORDERADM_H.
You then need to check the table CRMD_LINK.
In this table you will then find a number in 11 = sales. This refers to the table CRMD_SALES. There are also links to many other tables ie Shipping, pricing, org etc.
CRMM_BUT_SET0140 - for Sales Group, Sales Office, District
CRMM_BUT_LNK0141 - for Sales Area data
Transaction CRMD_BUS2000115 allows you to see all sales transactions for a BP. CRMD_BUS2000126 shows you activities for selected BP.
Regards
M

Using Table.Join formula takes extremly long time to get results.(Why Query Folding doesn't work?)

Hi,
I built a query with 4 tables inside (load from Oracle DB and two of them are quite big, more than millions of rows). After filtering, I tried to build relationships between tables using Table.Join formula. However, the process took extremly long time to
bring out results (I ended the process after 15 mins' processing). There's a status bar kept updating while the query was processing, which is showed as . I suppose
this is because the query folding didn't working, so PQ had to load all the data to local memory first then do the opertion, instead of doing all the work on the source system side. Am I right? If yes, is there any ways to solve this issue?
Thanks.
Regards,
Qilong

Hi Curt,
Here's the query that I'm refering,
let
 Source = Oracle.Database("reporting"),
 AOLOT_HISTS = Source{[Schema="GEN",Item="MVIEW$_AOLOT_HISTS"]}[Data],
 WORK_WEEK = Source{[Schema="GEN",Item="WORK_WEEK"]}[Data],
 DEVICES = Source{[Schema="GEN",Item="MVIEW$_DEVICES"]}[Data],
 AO_LOTS = Source{[Schema="GEN",Item="MVIEW$_AO_LOTS"]}[Data],
 Filter_WorkWeek = Table.SelectRows(WORK_WEEK, each ([WRWK_YEAR] = 2015) and (([WORK_WEEK] = 1) or ([WORK_WEEK] = 2) or ([WORK_WEEK] = 3))),
 Filter_AlotHists = Table.SelectRows(AOLOT_HISTS, each ([STEP_NAME] = "BAKE" or [STEP_NAME] = "COLD TEST-IFLEX" or [STEP_NAME] = "COLD TEST-MFLEX") and ([OUT_QUANTITY] <> 0)),
 #"Added Custom" = Table.AddColumn(Filter_AlotHists, "Custom", each Table.SelectRows(Filter_WorkWeek, (table2Row) => [PROCESS_END_TIME] >= table2Row[WRWK_START_DATE] and [PROCESS_END_TIME] <= table2Row[WRWK_END_DATE])),
 #"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"WRWK_YEAR", "WORK_WEEK", "WRWK_START_DATE", "WRWK_END_DATE"}, {"WRWK_YEAR", "WORK_WEEK",
"WRWK_START_DATE", "WRWK_END_DATE"}),
 Filter_AolotHists_byWeek = Table.SelectRows(#"Expand Custom", each ([WORK_WEEK] <> null)),
 SelectColumns_AolotHists = Table.SelectColumns(Filter_AolotHists_byWeek,{"ALOT_NUMBER", "STEP_NAME", "PROCESS_START_TIME", "PROCESS_END_TIME", "START_QUANTITY", "OUT_QUANTITY", "REJECT_QUANTITY",
"WRWK_FISCAL_YEAR", "WRWK_WORK_WEEK_NO"}),
 Filter_Devices= Table.SelectRows(DEVICES, each ([DEPARTMENT] = "TEST1")),
 SelectColumns_Devices = Table.SelectColumns(Filter_Devices,{"DEVC_NUMBER", "PCKG_CODE"}),
 Filter_AoLots = Table.SelectRows(AO_LOTS, each Text.Contains([DEVC_NUMBER], "MC09XS3400AFK") or Text.Contains([DEVC_NUMBER], "MC09XS3400AFKR2") or Text.Contains([DEVC_NUMBER], "MC10XS3412CHFK") or Text.Contains([DEVC_NUMBER],
"MC10XS3412CHFKR2")),
 SelectColumns_AoLots = Table.SelectColumns(Filter_AoLots,{"ALOT_NUMBER", "DEVC_NUMBER", "TRACECODE", "WAFERLOTNUMBER"}),
 TableJoin = Table.Join(SelectColumns_AolotHists, "ALOT_NUMBER", Table.PrefixColumns(SelectColumns_AoLots, "AoLots"), "AoLots.ALOT_NUMBER"),
 TableJoin1 = Table.Join(TableJoin, "AoLots.DEVC_NUMBER", Table.PrefixColumns(SelectColumns_Devices, "Devices"), "Devices.DEVC_NUMBER")
in
 TableJoin1
Could you please give me some hints why it needs so long to process?
Thanks.

Indexes in table join

Hi Experts,
I have three tables and I am using a join condition to link the three tables. Just need to know how can I improve the performance of the select query by using indexes. Can a secondary index be used in join table where in the where clause i have attributes from three different tables. If yes how do I do it.
Please suggest solution with examples.
Help will be much appreciated.
Regards.

Hi
joining 3 tables may refer in bad performance
because if the number of table or 2 then you can go for joins
if the number of tables are more than 2 then use for all entries
because if you use more than 3 tables in the data base connection will be there for that 3 tables up to displaying the data
if you use for all entries then no need of joining the tables
finally
for all entries have more performance than joins
Primary and secondary indexes
Index: Technical key of a database table.
Primary index: The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
Secondary index: Additional indexes could be created considering the most frequently accessed dimensions of the table.
Structure of an Index
An index can be used to speed up the selection of data records from a table.
An index can be considered to be a copy of a database table reduced to certain fields. The data is stored in sorted form in this copy. This sorting permits fast access to the records of the table (for example using a binary search). Not all of the fields of the table are contained in the index. The index also contains a pointer from the index entry to the corresponding table entry to permit all the field contents to be read.
When creating indexes, please note that:
An index can only be used up to the last specified field in the selection! The fields which are specified in the WHERE clause for a large number of selections should be in the first position.
Only those fields whose values significantly restrict the amount of data are meaningful in an index.
When you change a data record of a table, you must adjust the index sorting. Tables whose contents are frequently changed therefore should not have too many indexes.
Make sure that the indexes on a table are as disjunctive as possible.
(That is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.)
Accessing tables using Indexes
The database optimizer decides which index on the table should be used by the database to access data records.
You must distinguish between the primary index and secondary indexes of a table. The primary index contains the key fields of the table. The primary index is automatically created in the database when the table is activated. If a large table is frequently accessed such that it is not possible to apply primary index sorting, you should create secondary indexes for the table.
The indexes on a table have a three-character index ID. '0' is reserved for the primary index. Customers can create their own indexes on SAP tables; their IDs must begin with Y or Z.
If the index fields have key function, i.e. they already uniquely identify each record of the table, an index can be called a unique index. This ensures that there are no duplicate index fields in the database.
When you define a secondary index in the ABAP Dictionary, you can specify whether it should be created on the database when it is activated. Some indexes only result in a gain in performance for certain database systems. You can therefore specify a list of database systems when you define an index. The index is then only created on the specified database systems when activated
Reward if usefull

Table join and Logical databasein a same query

Hi Experts,
I have an existing query which is created using table join. I now want to add a logical database in the same infoset.
Is it possible to add a logical database in the same infoset?
Regards,
Prakhar

Hi Prakhar,
If you see the below scren, you can use data source either Table join using basis table or Logical database.
but if you need ldb with some addition table field then you can data retrieval by program step or you can use LDB with doing some code in inside your infoset.
Regards,
Prasenjit

How to insert a record for tables joined

Hi,
first of all I've been learning Forms for few days.
I've created a simple form where I report the columns from two tables joining them.
Once I've entered a new list of values in the fields of the form, how can I insert them in the two tables? What I've done, but it doesn't work, is to set "Insert Procedure Name" of the data block = to my procedure compiled in "Program Units" hoping that once pushed the "Execute Query" button in the running form worked, but it didn't work.
Any advice for the better way to how execute an insert in one or more tables with the content of the fields of the form?
My versions are: database 10gXE and forms 10.1.2.0.2
Thanks in advance!

Hi,
Create two data blocks using create data block wizard and join it with a relation. Display the fields you want and form will automatically save your updates in the both tables.
When there is a join you can not update all the fields.
Regards
Yoonas
Edited by: yoonus on Oct 3, 2012 1:04 AM

Multi-table Join

I want to join a table with the result of another table join. Is there a syntax to make the first join execute first? Or perhaps I'm going at this all wrong. Any insight would be appreciated. Thanks

I want to join a table with the result of another table join. Hi,
Your "other join" is just like a table, so you can do things like this:
SQL> with t1 as (select 1 x, 'v1' v1 from dual)
2     , t2 as (select 1 y, 'v2' v2 from dual)
3     , t3 as (select 1 z, 'v3' v3 from dual)
4 select *
5    from t1, (select *
6                from t2, t3
7               where t3.z = t2.y) joined
8   where t1.x = joined.y;
         X V1          Y V2          Z V3
         1 v1          1 v2          1 v3
[pre]
Regards
Peter

Regarding Table maintainace generator

Frnds,
           Hope all are doing good.
           I am recently working on ECC 6.0 and i want to create table maintainance generator for a ztable. Actually i hav created function grp and passed in sm30 transaction and used single screen. Problem is when i double clicking the screen number its going to se 51 and going to a standard progam named with function grp
SAPLZNEWFUNCTION. From i m confused but in that already some standard code is maintained. But there i hav created screen comprising our ztable fields..
From there i m confused .. how to link with ztable and how to create standard transaction for entering data into that screen and updating the ztable.
Frnds i hav seen so many documents .. i dont need documents ..plzz guide me with proper steps for achieveing target.
thanking u all for reading my doubt and acting on it.
regards,
karan

Here is the steps for making table maintaince generator ...
Creating Maintenance Views
Procedure
1.Enter an explanatory short text in the field Short text.
You can for example find the view at a later time using this short text.
2.Enter the primary table of the view under Tables in the Tables/Join conditions tab page.
Only those tables that are linked with the primary table (indirectly) with a foreign key can be included in the maintenance view.
3.If required, include more tables in the view. In a maintenance view you can only insert tables that are linked to one another with foreign keys.
Place the cursor on the primary table and choose Relationships. All existing foreign key relationships of the primary table are displayed. Select the required foreign key and choose Copy. The secondary table used in such a foreign key is included in the view. The join conditions derived from the foreign keys (see Foreign Key Relationship and Join Condition) are displayed.
You can also insert tables that are linked by foreign key with one of the secondary tables that was already inserted. To do this, place the cursor on the secondary table and choose Relationships. Then proceed as described above.
For maintenance and help views, there are certain restrictions on the foreign keys with which the tables can be included in the view (see Restrictions for Maintenance and Help Views). The foreign keys violating these conditions are displayed at the end of the list under the header Relationships with unsuitable cardinality.
4.On the View fields tab page, select the fields that you want to copy to the view.
Choose Table fields. All the tables contained in the view are displayed in a dialog box. Select a table. The fields of the table are now displayed in a dialog box. You can copy fields by selecting them in the first column and choosing Copy.
All key fields of the primary table must be included in a maintenance view. In addition, all key fields of secondary tables that are not involved in the foreign key (that is, which are not linked via a join condition to a key field already included in the view) must be included in the view.
This ensures that the records inserted with a maintenance view can be written correctly in the tables contained in the view.
5.On the Selection conditions tab page, you can (optionally) formulate restrictions for the data records that can be displayed with the view (see Maintaining Selection Conditions for Views).
The selection conditions define the data records that can be selected with the view.
6.In the Maintenance status tab page, define the maintenance status of the view.
The maintenance status defines how you can access the view data with the standard maintenance transaction (SM30).
7.Choose   activate
8.Go to Transaction SE54 with Environment ® Tab.maint.generator.
From the view definition you can generate maintenance modules and maintenance interfaces that distribute the data entered with the view to the base tables of the view. You can find more information in Creating a Maintenance Dialog.
here is the link for creating Tcode .
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
Girish

Sample coding for multiple table join

Hi,
i need a sample coding for multiple table join. can anyone help me out.
regards
Gokul

SELECT AVBELN AFKDAT AVTWEG ASPART AWAERK AKURRF AKUNAG AKNUMV
         BPOSNR BFKIMG BNETWR BMATNR
         DBEGRU ELABOR E~MATKL
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM VBRK AS A INNER JOIN VBRP AS B
              ON AVBELN EQ BVBELN
         INNER JOIN J_1IEXCHDR AS C
              ON AVBELN EQ CRDOC
         INNER JOIN KNVV AS D
              ON DKUNNR EQ AKUNAG AND
                 DVKORG EQ AVKORG AND
                 DSPART EQ ASPART AND
                 D~BEGRU NE SPACE
         INNER JOIN MARA AS E
              ON EMATNR EQ BMATNR
         WHERE A~FKDAT IN S_FKDAT AND
               A~FKART EQ 'F2'    AND
               A~VTWEG IN S_VTWEG AND
               A~SPART IN S_SPART AND
               A~KUNAG IN S_KUNAG AND
               A~FKSTO NE 'X'     AND
               B~WERKS IN S_WERKS AND
               C~TRNTYP = 'DLFC' AND
               E~LABOR IN S_LABOR AND
            C~SRGRP IN ('01','02','03','31','32','33','41','42','43',
                        '81','82','83','95','55','45', '48') AND
               B~MATNR IN S_MATNR AND
               D~BEGRU IN S_BEGRU AND
               E~MATKL IN S_MATKL.
but my suggestion not to use more than 2 table in inner join it will affect in performance use for all entries instead of join.
regards
shiba dutta

Context index can't be used in complicated multiple tables join?

hello
thank you for view this page.
i have a comlicated sql :
SELECT count(*)
from
((app_AssetBasicInfo left join app_AssetBasicInfoExt on
app_AssetBasicInfo.id=app_AssetBasicInfoExt.id) left join
(app_AssetCustominfo1 left join app_AssetCustominfoExt1 on
app_AssetCustominfo1.id=app_AssetCustominfoExt1.id) on
app_AssetBasicInfo.id=app_AssetCustominfo1.id) WHERE
app_AssetBasicInfo.CategoryID=1 AND Del_tag=0 and contains(description,'department')>0;
the table app_AssetBasicInfo and app_AssetBasicInfoExt have multiple columns and large recoord size. i create a context index on app_assetbasicinfoext(description) which description is 4000 varchar2.
but the sql doesn't use context index. i suspect that the complicated multiple table join can't use context index? does it correct?
thanks very much!

Could you please post an explain plan? I'm not quite sure what is the issue.

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to build table join query in Jdeveloper

Hi,
Can someone tell me how to build table join query in Jdeveloper's Expression Builder UI?

[Is it possible to create a table of contents in Crystal Reports?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333133303330%7D.do]

Strange behaviour of view based on several tables join with union all

Dear fellows we r facing a strange problem we have a view based on several tables joined by union all ,when we issue an ordered query on date,rows returned are unusually different than they should be .
Is oracle has some special behaviour for view based on union all ?
I m using oracle 8.1.6 on windows 2000
Kashif Sohail

Did you ever solve this problem? I have two select statements based on 4 tables and 3 views using about 5 more tables. When I execute each select individually I get exactly what is expected. When I UNION ALL both selects together, I get "no rows returned", however when I UNION them I get exactly what is expected. I should get the same answer for both UNION ALL and UNION. The two select statements are identical, except for one column where I changed the constant to be different. Any thoughts?

Regarding table join in SQVI

Similar Messages

Maybe you are looking for