Regarding Table maintenance genrator

Hi friends,
I have created table . I want to use events of table maintenance generator. After creating table i had gone to utilites -> table maintanace generator , there i have written Authorization Group , function group and maintain screen no.
When i gone to environment -> modification -> events it is in disable mode, how to keep enable mode. Please sepecify it.

Hi ,
1. check whether the checked table maintainence in Attributes section.
2. give function group name and and authorisation group to create a general Table Maintainece.
3, Then go to menu -> environment->Modifications->Events.
check according to this conditions .
Regards,
Madhavi

Similar Messages

Regarding Table Maintenance Generator of a Database Table.

Hi,
I have two DB tables (These tables were developed previously) i am asked to maintain entries in these tables.
The delivery class of both tables is 'C' and in the table maintenace generator both have the "Recording routine" as "STANDARD RECORDING ROUTINE". But one of the tables is prompting for Work Bench request and the other for Customizing Request.
Could anyone please guide me when a table asks for a Customizing Request and WorkBench request.
Thanks in Advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hi Raghavendra,
this is from help.sap.com
The delivery class controls the transport of table data for installation, upgrade, client copy and when transporting between customer systems. The delivery class is also used in the extended table maintenance.
The delivery class is also used in the Extended Table Maintenance (SM30).
It is not possible to transport the entered data using the transport connection of the generated maintenance interface for tables having delivery classes W and L.
Data that is entered is checked to see if it violates the namespace defined in table TRESC. If the data violates the namespace, the input is rejected.
Check this link for more info..
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21eb6e446011d189700000e8322d00/frameset.htm
Regards
Suresh Datti

Hi...Regarding Table maintenance generator

Hi..
What is the purpose of table maintenance generator.
In which scenario, we will create table maintenace.
Regards
Sandeep.

Hi Sandeep
hope it will help you.
Reward if help.
table maintanance Generator is used to manually
input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under
attributes tab
2) utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
3)
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers
this dialog box appears when you click on create
button
6) save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Regarding table maintenance generator

hi
i have one scenario . supppose there are 4 fields in a table. user enters data into it using table maintenance generator. he enters data only for 2 fields remaining 2 fields should get populated automatically.
is it possible?

Go to SE11->Table Maintenance generator -> Environment->Modification-> Events
Here you can define events and the form routines that will be invoked on that particular event.
Say for example you want to populate details for the user who created the records, define the form FRM_CR_DATE (any form routine name) for populating the Create Details using event 05.
Event 05 is fired for "Creating a new entry".
Click on the EDITOR Button and write the following code for saving the user details while creating a new record.
*       FORM FRM_CR_DATE                                              *
form frm_cr_date .
ztablename-created_by      = sy-uname .
ztablename-created_on      = sy-datum .
ztablename-create_time     = sy-uzeit.
endform .
The current username, system date and time will be moved to the table work area for each record created.

Regarding Table Maintenance Generator querry

Hi Friends,
Can anybody pls tell me how stop the custom code from overwriting in overview screen from overwritng upon re-generation of TMG?
Thanks in advance.

Hello there.
You can play around with field exits to control regeneration Table Maintanance screens.
Choose one of the fields on the TMG screen, say BRGRU.
Run report RSMODPRF for BRGRU, and choose an exit number (between 1 to 9).
Execute this and it generates a function module which is a field exit and will be triggered when the TMG is called.
Within this Function module, you can write code to restrict regeneration.
For example:
function field_exit_brgru_1.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(INPUT)
*" EXPORTING
*"     REFERENCE(OUTPUT)
field-symbols: <f_tabname> type any.
assign ('(SAPMSVIM)VIMDYNFLDS-VIEWNAME') to <fg_tabname>.
if sy-subrc = 0.
    if sy-ucomm = 'DLFU' or sy-ucomm = 'RESE' or sy-ucomm = 'SAVE'.
      if <f_tabname> eq 'Z_MYTABLE'           " Field Exit Added for object
         message e017(z_msgclass) with <f_tabname>.
      endif.
    endif.
endif.
output = input.
endfunction.
This means for, Z_MYTABLE, if someone tries to regenerate the TMG, it ends with an error .
Hope this helps.

Table maintenance generator

Hi All,
I have created a table maintenance generator and maintained data in that.
After that I added one more field in that table, but when I goto SM30 to add entries I cannot find that field.
Please suggest,
Thanks ,
Salman Zahir

Hi,
Whenever you do any changes in a database table, and then activate it, you need to create a new maintenance genrator for your table, else no changes would be reflect in SM30.
As you have added a new field in your ztable, activate it, and delete the old maintenance generator and create a new maintenance generator in the similar way as created initially.
Now execute SM30 and all the modification would be displayed to the user.
Hope this helps you.
Regards,
Tarun

How to use table maintenance view in module pool screen

hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
       exporting
            action                       = 'U'
            view_name                    = 'Z_Table_Name'
       exceptions
            client_reference             = 1
            foreign_lock                 = 2
            invalid_action               = 3
            no_clientindependent_auth    = 4
            no_database_function         = 5
            no_editor_function           = 6
            no_show_auth                 = 7
            no_tvdir_entry               = 8
            no_upd_auth                  = 9
            only_show_allowed            = 10
            system_failure               = 11
            unknown_field_in_dba_sellist = 12
            view_not_found               = 13
            others                       = 14.
Regards,
RIch Heilman

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

Open T-code on double click of field in table maintenance

Hi Gurus,
I have one scenario, I have to show a transaction on double click event on a field of Table Maintence.
Please guide me in this .
Is there is any event in Table Maintenance Events to capture double_click of a field.
Regards,
Sowmen

1. In the field attributes of the particular field there is a chechbox in display tab which says respond to double click, check that.
2. Assign the fuction code "PICK" for function code F2 in GUI status.
3.Now whenver you double click the field function code "PICK" gettes triggeed.
Now you can wrie yyou code based on this function code.
CASE sy-comm.
WHEN 'PICK'.
*If you want the name of the field and the value in that field use the below code.
GET CURSOR FIELD gv_field VALUE gv_cursor_value.
*DO your operation based on the field and the value.
ENDCASE.
Regards,
Smithesh

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to create event in table maintenance generator

Hi guys,
I need to create an event for my table maintenace generator such that when the field land1 is filled, the landx field should take its data from t005t table. and the ladnx field should be display only, it can not be modified in table maintenance.
How can i create an event in table maint. gen? How am i going to do it?
thanks always,
mark

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

EVENTS in table maintenance Generator

Hi, can u people help me while using EVENTS in Table Maintenance Generator. Means how can I perform different task using events.

Hi,
Using events in table maintenace generator, you can validate the fields, update the fields etc..There are events(01-New Entry), (02-Before Save); (03-After Save) etc... The respective events trigger on the action performed.
To create events : Goto table maintenace generator screen->Enviorement->Modifications->Events.
Select the from the list of events and peform based on ur requirement
Regards
Shiva

Events in table maintenance generator 01

Hi all,
       I have an urgent requirement regarding the events in table maintenance generator.The requirement is i have a qty field in table i want to change the existing value it should allow only a lesser value.How to use TOTAL and EXTRACT structures.
it is urgent.please help me out.
Thanks & regards,
Kranthi

Follow the example below:
form get_vendor_name.
data w_extract type z_table.
data begin of w_total.
          include structure z_table.
data: action,
        mark,
end of w_total.
loop at extract into w_extract.
    check not w_extract-z_vend_no is initial.
    select single name1 from lfa1
                       into w_extract-z_vend_name
                       where lifnr = w_extract-z_vend_no.
    modify extract from w_extract.
endloop.
loop at total into w_total.
    check not w_total-z_vend_no is initial.
    select single name1 from lfa1
                       into w_total-z_vend_name
                       where lifnr eq w_total-z_vend_no.
    modify total from w_total.
endloop.
endform.
Reward points if useful.
Regards.

Using an event in table maintenance view to populate a field

I have a table maintenance view, and I would like to populate one field of the table with derived data. I am trying to do this by coding a routine for one of the events, but so far no luck. I have been able to chege the data in the TOTAL table, but still it does not populate the field on the screen.
Note this is not for one row as it is entered, but I want all rows of the table displayed to show this field with derived data.
So the question is: what is the correct event to use, and what is the correct internal table to update? Can I make changes to EXTRACT or TOTAL to do this?
Kind Regards,
Tony.

Hi Rob,
Sorry for being lazy; I'll close this and off and search :-}
BR,
Tony.

Refresh data in Table Maintenance view

Hi,
I have created a table maintenance view for db table A and added my function button to this view. When I click the button I append a few records to the table A from table B. But this recoreds are not displaied in the view.
If I rerun the view I can see added records.
How I have to refresh the view to display added records?
Regards,
Ilya

Hi Jesus,
COMMIT WORK isn't help me.
I found that I have to use TOTAL and EXTRACT structures to modify data in maintenance view.
It's fine. I do something like this in my FM
MODULE 9CUSTOM_PF_BUTTON INPUT.
lt_total[] = total[].
lt_extract[] = extract[].
CASE function.
      WHEN '9DOWNSH'.
         modify lt_total from wa_total.
         modify lt_extract from wa_extract
ENDCASE.
total[]   = lt_total[].
extract[] = lt_extract[].
ENDMODULE.                 " 9CUSTOM_PF_BUTTON INPUT
But TOTL and EXTRACT tables contain data of the current maintenance view.
I work with a view cluster and I have to append or delete records from one view if I do something in other view.
How I can modify data one view from another maintenance view?
If I have modified database tables directly I don't see changes in the view cluster.
Regards,
Malnor
Edited by: Malnor on Nov 23, 2010 9:19 AM
Edited by: Malnor on Nov 23, 2010 9:38 AM

Regarding Table maintenance genrator

Similar Messages

Maybe you are looking for