Regarding the Qm Status

Hi,
I have loaded data into an InfoCube. The Data is loaded successfully into the InfoCube and the Status in Monitoring tab is Greeen. Also the Tech Status under Manage tab is Green. But the Qm Status is Yellow. Also I am unable to display the data in BEx.
I have refreshed several times and still the Qm Status is not changing to Green. In SM 37 it is showing that the job is finished.
Now how to make the Qm status to Green and make the data available for Reporting....
Regards
YJ

Jayanth,
Please find effects of SettingQM Status Forcefully.
1. aggregating the relevant InfoCubes ,         
2. compressing the relevant InfoCubes  ,        
3. activating relevant ODS Objects      ,       
4 updating relevant ODS Objects          ,     
5. query content of the relevant InfoCubes and ODS Objects.
I hope you know how to assign points and close the issue.
Thanks
Ramu

Similar Messages

  • Regarding the change status of leave workflow.

    hi friends,
    i have copied the standard leave worklfow "WS12300111" and customized it just to meet our requirement means for multiple approvers.
    everything is working fine in production  means if user ID "AIHR01' raise a leave request the workitem will go to "AIHR02" after his approving the workitem will go to the final approver means "AIHR03" after his approval the leave request will be completed and the status in the TC - PTARQ is coming as "APPROVED" means only after the approving of "AIHR03" the status is coming "APPROVED" but in some cases when user id "AIHR02" is approved instead of coming status "SENT" it is coming "APPROVED"  in TC-PTARQ and because of this status the workitem is coming blank in UWL of "AIHR03".
    I have already incorporated the given below method in the "WORKFLOW" just to change the status from "APPROVED"  to "SENT" after the approval of user ID "AIHR02" but in some cases it is not working fine it is giving BUG.
    begin_method changestatus changing container.
    DATA:request TYPE ptreq_header-request_id,
              wi_id TYPE swwwihead-wi_id.
    DATA: request_instance TYPE REF TO if_pt_req_request,
               event   TYPE tim_req_xfer_event VALUE
               cl_pt_req_const=>c_reqtrans_send,
               ex_status TYPE tim_req_status,
               container_wi TYPE swcont OCCURS 0,
               agents TYPE STANDARD TABLE OF swhactor WITH HEADER LINE.
              swc_get_element container 'REQUEST' request.
              swc_get_element container 'Wi_id' wi_id.
    DO.
      CALL FUNCTION 'ENQUEUE_EPTREQ'
       EXPORTING
        MODE_PTREQ_HEADER       = 'S'
        MANDT                   = SY-MANDT
         request_id              = request
        X_REQUEST_ID            = ' '
        _SCOPE                  = '2'
        _WAIT                   = ' '
        _COLLECT                = ' '
       EXCEPTIONS
         foreign_lock            = 1
          system_failure          = 2
          OTHERS                  = 3
        IF sy-subrc = 0.
          EXIT.
        ENDIF.
        WAIT UP TO 60 SECONDS.
      ENDDO.
      IF sy-subrc = 0.
        CALL METHOD ca_pt_req_header=>agent->get_request
          EXPORTING
            im_request_id     = request
          IMPORTING
            ex_request        = request_instance
          EXCEPTIONS
            request_not_found = 1
            OTHERS            = 2.
        IF sy-subrc = 0.
          CALL METHOD request_instance->initiate_state_trans
            EXPORTING
              im_transfer_event = event
               im_external_call  = 'X'
       im_ret_value      = 0
                     ex_new_status     = ex_status
       ex_ret_code       =
          swc_set_element container 'Ex_Status' ex_status.
        ENDIF.
        CALL FUNCTION 'DEQUEUE_EPTREQ'
         EXPORTING
      MODE_PTREQ_HEADER       = 'S'
      MANDT                   = SY-MANDT
           request_id              = request
      X_REQUEST_ID            = ' '
      _SCOPE                  = '3'
      _SYNCHRON               = ' '
      _COLLECT                = ' '
      ENDIF.
      swc_create_container container_wi.
      swc_set_element container_wi 'WI_ID' wi_id.
      agents-otype = 'US'.
      agents-objid = sy-uname.
      APPEND agents.
      CALL FUNCTION 'SWW_WI_START_SIMPLE'
        EXPORTING
          task                         = 'TS90000089'
          called_in_background         = 'X'
        TABLES
          agents                       = agents
          wi_container                 = container_wi
        EXCEPTIONS
          id_not_created               = 1
          read_failed                  = 2
          immediate_start_not_possible = 3
          execution_failed             = 4
          invalid_status               = 5
          OTHERS                       = 6.
      end_method.
    Request you to plesase help me to solve this issue .why in some cases instead of coming status "SENT" it is coming "APPROVED"  after the approval of user id "AIHR02".
    BECAUSE of the  "APPROVED" staus the same workitem is coming blank in the UWL OF "AIHR03".

    solved by own

  • How to send a report for particular job chain every hour regarding the job

    Hi Gerben/Anton
    We are running one jobchain for all billing jobs . Is any chance is there to send a report automatically to certain pupils for every one hour regarding the job status(excel format ) .
    Coudl you please help on this it should be good if i get any reply on this .
    Thanks
    Ramkumar

    Hi Ram,
    I need your help on getting mail alert with  log file.
    here is how i have provide the parameter valure for job definition: system_mail_sent.
    Step1 with one job1 and step2 with one job1
    In step2 , i have included the job definition to send mail. with below parameter.
    Relative Job: Step 1, Job 1
    Job File: step 1, job 1: step 1/log.txt
    Please let me  know if the above method is correct or not.
    NOTE: mail server and from address are configured.
    Thanks,
    Karthik

  • Question over the appraisal status change

    Dear All,
    Our appraisal has ( following the flexible template ) has planning, mid year review and final phases. With in each main status we have sub status configured. Example - In the planning stage ( say in the month of February ) , employee add objectives, change weights etc and send to manager for approval. If manager approves, the document status will be changed from planning  to mid year status and employee's form is changed to the display mode ( so he cannot update objectives / weight etc)
    Then again in the mid year  status ( say a few months later - June ist ), the employee needs to review the appraisal, add or update the objectives etc and submit for manager approval.
    My issue is -  After the employee's appraisal form is changed to display only from planning to review status - How the employee's appraisal  form can be changed from a read only to change mode in the same status ? As it is necessary for employee to add/ update in the form.
    I am seeking the best approaches for the below as I am considering two options ( as mentioned below )
    1)   For the  mid year status  , I will configure a sub status ( called start mid year ) and attach a push button. The employee select the push button during the mid year  period ( say June 1st ) and this push button triggers the status change from Mid year to Mid Year / Start Mid year. We also plan to apply a custom implementation for  BADI for column access and badi  (HRHAP00_COL_ACCESS) will decide the access control for columns etc.
    2) The other approach I am considering is we are considering a workflow (INFO_APPRAISEE_CHANGE_REVIEW ) to notify th employee 7 days before the mid year review starts. Can this workflow trigger the status change or read the column access from the BADI (HRHAP00_COL_ACCESS) ?
    Any other simpler approaches ?
    I saw in the Process config ( tabs and process ) that we can define the phase with dates and status / substatus etc. Can this be useful for the above scenario. For eg. On June 1st when the mid year review start, can the status be changed  like from Mid year  to Mid Year / Start Mid year ?
    Please let me know . Greatly Appreciated!
    Aneez Hameed

    Hi Aneez, both options are great,   HRHAP00_COL_ACCESS is configurable at each sub-status, so you have many options.  You can have the manager "approve" at beginning of year, but keep it in "in planning" by having a 3rd sub-status.
    You can have the employee or manager have access to the pushbutton so that mid-term can start. 
    you can also do a workflow option where it is changed automatically, your option 2.
    the final option is the HR adminstrator can change the status, by doing a mass select in phap_admin and then they change to the status to move it to "in review" with all of your mid-term substatuses. 
    they key to making this work is the additional config that goes along with HRHAP00_COL_ACCESS.  here you will want to do define a Z table with the following columns:
    object id - your template ID
    role - which are the same roles values defined at your template - apee for apraisee
    template status - integer - represents status ID
    template sub-status - ID
    column id - FAPP, OBJO, etc..
    availability indicator (char) - here you will configure H, X etc... which the badi uses to know how to handle it. 
    best regards - michael

  • How to change & see the PO Status (Purchase Order Status) ?

    Hi Everybody,
    I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
    Please help me out asap.
    Thanks & Regrds,
    Nagaraju Maddi
    Message was edited by: Nagaraju Maddi

    Hi ,
    It is possible to Update the Pricing procedure in Old PO. For this what you need  to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
    Hope this will help you
    Best Regards,
    Pradeep Naik

  • Change the transaction status when creating a follow up activity

    Hello All
    We need to change the activity status if a follow up document is created from. E.g. If an activity is created type 001  then a follow-up activity type 003 as a follow up document from 001 the system automatically changes the activity status from open to in process. I need detailed steps regarding how to reach this
    Regards
    Jacopo

    See if you can "exploit" CRM_COPY_BADI and function modules CRM_STATUS_CHANGE_EXTERN to change the User status or CRM_STATUS_CHANGE_INTERN for System status.

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

    Hi All,
    I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    awebsctl.log file has below errors:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
    Catalog Website is working.
    Thanks & Regards, Kedar

    Hi Jason,
    Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
    IIS Website: Default Web Site
    Port Number: 80
    with default value for Web Application Name configured.
    For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate. 
    Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
    Possible cause: The designated Web Site is disabled in IIS. 
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    For more information, refer to Microsoft Knowledge Base.
    And awebsctl.log has the below error lines:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    STATMSG: ID=8100
    What should I check from IIS side?
    Application Catalog Website is functioning properly.
    Thanks & regards,
    Kedar
    Thanks & Regards, Kedar

  • A few queries regarding the beauty that is Nokia 5...

    I got this beautiful lil machine a lil over a week back. It looks lovely, and sounds even better. And even though, being a student/intern, it cost me more than my monthly salary, I am mighty pleased I got it. And despite the opposition before, it's a great hit, both at home and work. 
    Just a few queries regarding the usage from my experience so far, the answers to which I could not find in this forum and a few other review sites. [Apologies if I'd missed something.]
     1- First, the battery. It only lasts for a little over a day on full charge. From what I'd heard and read, it looked like it should last quite a bit a more, atleast 2 full days. The phone even hung up a couple of times, while recording/playing video. Upon which I had to remove and reinsert the battery. How seriously wrong is this ?
    2- How do you forcefully exit an application, if need be ? It suggests in the guide, and from the reviews I read, there's supposed to be an exit and a start button with the applications when you bring up the task manager. Where're they?
    3- There's this option where you can insert a Slideshow as your Wallpaper. But when I go to it, select the desired images, [ Tried various random images, yes ]it only shows Options and Back button, when select Back, it just goes, well, back. Nothing really happens to the wallpaper. How does that work ?
    4- This might seem like a petty issue, but it can be pretty annoying. Once you go to Options and tell it you are marking, e.g. in the Inbox or the File Manager, how do you mark multiple items, WITHOUT having to go to Options >Mark >Mark/Unmark for each item ? What's the point of having a seperate Marking option in the first place then, when I could just Move or Delete each item seperately anyway. 
    5- And last, any news on a free full version of a document viewer ? From what I looked up, it costs around US$70, which is about a quarter of the phone's purchase price itself. And that's not a modest sum, that too for a basic application such as this, for a anyone with my status.
    Just so any prospective buyer or amateur user such as myself doesn't get scared off by the seemingly long list of inquiries, the phone's an absolute pleasure to use. Specially, for someone with their first Touchscreen/Symbian experience. I got this phone after a LOT of research, both online and in the field. And it's bloody well worth it so far. 
    I know, it's a huge post, but you'd have my utmost gratitude for an accurately detailed response. Thankyou. =)
    Solved!
    Go to Solution.

    Why of course. Something happening to your phone during the process would brick it, not to mention that the attempt would install something in your phone that voids the warranty, meaning that you just made yourself a very expensive paperweight. ^_^. We're not really allowed to talk about it, other than the fact that with the above possibility, I strongly advise you not to do so. There is a way to do it without hacking it. I know of people who have managed to do it without hacking, but it was on the 5800. Hmm, ok, maybe they'll work for you too though.
    http://forum.dailymobile.se/index.php/topic,4254.0.html 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Regarding the error ORA-01841: (full) year must be between -4713 and +9999,

    The issue is the code is not inserting the good records into the MIE table. This is becasue of the error 'OtherError GFSTM_INS_SNURK_NEW_TABLES_PA.gfstm_ins_asn_journal_pr:ORA-01841: (full) year must be between -4713 and +9999, and not be 0' This error is throwing out because of space issue in dt_asn_shipped.
    My requirement is to log error if any if not get the next record in the loop and insert it in the table if it has no error. The issue is good records are not getting inserted. The snurk_cmms_crct018_asn_journl in the cursor is a synonym which uses dblionk to connect to the remote db. The dt_asn_shipped data type is char(6) and the format is YYMMDD.
    declare
    CURSOR cur_asn_journal IS
    SELECT NVL(TRIM(cd_asn_plant),' ') cd_asn_plant,
         NVL(TRIM(no_journal),0) no_journal,
    NVL(TRIM(cd_ship_from),' ') cd_ship_from,
         TRIM(no_asn) no_asn,
    DECODE(LENGTH(dt_asn_shipped),6, to_date(to_char(to_date(trim(dt_asn_shipped),'YYMMDD'),
    'DD-MON-YY'),'DD-MON-YY'), '') dt_asn_shipped,
    TRIM(dt_processed) dt_processed,
    TRIM(in_manual) in_manual,
         TRIM(ts_last_update) ts_last_update     
    FROM snurk_cmms_crct018_asn_journl;
    BEGIN
    FOR l_rec_asn_journal IN cur_asn_journal LOOP
    BEGIN
    INSERT INTO gfstmie_st_cmms_asn_journal
    gsdb_site_code ,
    journal_num,
    gsdb_site_from_code,
    adv_shipping_notice_cnum,
    adv_sn_shipping_date,
    processed_date,
    manual_in_code,
    cmms_last_update_cdate,
    create_userid,
    create_dts,
    update_userid,
    update_dts
    ) VALUES
    l_rec_asn_journal.cd_asn_plant,
    l_rec_asn_journal.no_journal,
    l_rec_asn_journal.cd_ship_from,
    l_rec_asn_journal.no_asn,
    l_rec_asn_journal.dt_asn_shipped,
    l_rec_asn_journal.dt_processed,
    l_rec_asn_journal.in_manual,
    l_rec_asn_journal.ts_last_update,
    g_con_user_id,
         l_dts_current_gmt,
    g_con_user_id,
    l_dts_current_gmt
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('l_num_exception_pt_7');
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_invalid_date;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END;
    END LOOP;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_12');
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_2 '||l_str_procg_mode_code);
    --Rollback uncommitted transactions
    ROLLBACK;
    --Assigning failure status
    o_num_status := g_con_status_failure;
    --Assigning procedure end time in GMT
    l_dts_end_time := GFSTU_DATETIME_UTILITIES_PA.gfstu_to_gmt_fn;
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_oracle;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    --Calling procedure to update the job status
    GFSTM_COMMON_UTL_PA.gfstm_update_job_status_pr(
    l_num_job_run_id,
    GFSTM_PARM_SPECIFICATION_PA.g_con_process_abort,
    l_dts_end_time,
    g_con_perf_metric_code,
    g_con_zero,
    g_con_n,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END ;
    Thanks,
    Vinodh

    Hi,
    Could you not have reduced your question to what is relevant?
    You seem to be saying that this is your problem:
    SELECT DECODE ( LENGTH (dt_asn_shipped),
              6,
              TO_DATE ( TO_CHAR ( TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD'), 'DD-MON-YY'), 'DD-MON-YY'),
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;As far as I can see, problem might be that you decode on UNTRIMMED length.
    Also, you could get rid of some the to_date(to_char(to_date), which is nothing more than simply to_date()
    Try something like
    SELECT CASE LENGTH (TRIM (dt_asn_shipped))
             WHEN 6 THEN TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD')
           END
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;Regards
    Peter

  • Error: Validation failed for the field - Status While creating Sales Order

    Hi,
    I am getting an error while trying to create sales order header.
    I have tried using provided in the metalink as well but it still doesn't seem to work.
    I am on R12.1.1
    Can somebody help me out on this?
    The code is
    set serveroutput on
    DECLARE
    l_header_rec OE_ORDER_PUB.Header_Rec_Type;
    l_header_rec1 OE_ORDER_PUB.Header_Rec_Type;
    l_line_tbl OE_ORDER_PUB.Line_Tbl_Type;
    l_line_tbl1 OE_ORDER_PUB.Line_Tbl_Type;
    l_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type;
    l_header_adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type;
    l_line_adj_tbl OE_ORDER_PUB.line_adj_tbl_Type;
    l_header_scr_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type;
    l_line_scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type;
    l_request_rec OE_ORDER_PUB.Request_Rec_Type ;
    l_return_status VARCHAR2(1000);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(1000);
    p_api_version_number NUMBER :=1.0;
    p_init_msg_list VARCHAR2(10) := FND_API.G_FALSE;
    p_return_values VARCHAR2(10) := FND_API.G_FALSE;
    p_action_commit VARCHAR2(10) := FND_API.G_FALSE;
    x_return_status VARCHAR2(1);
    x_msg_count NUMBER;
    x_msg_data VARCHAR2(100);
    p_header_rec OE_ORDER_PUB.Header_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_REC; 
    p_old_header_rec OE_ORDER_PUB.Header_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_REC;
    p_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_VAL_REC;
    p_old_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type := OE_ORDER_PUB.G_MISS_HEADER_VAL_REC;
    p_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_TBL;
    p_old_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_TBL;
    p_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_VAL_TBL;
    p_old_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_VAL_TBL;
    p_Header_price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_PRICE_ATT_TBL;
    p_old_Header_Price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_PRICE_ATT_TBL;
    p_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ATT_TBL;
    p_old_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ATT_TBL;
    p_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ASSOC_TBL;
    p_old_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_ADJ_ASSOC_TBL;
    p_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_TBL;
    p_old_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_TBL;
    p_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_VAL_TBL;
    p_old_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_HEADER_SCREDIT_VAL_TBL;
    p_line_tbl OE_ORDER_PUB.Line_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_TBL;
    p_old_line_tbl OE_ORDER_PUB.Line_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_TBL;
    p_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_VAL_TBL;
    p_old_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_VAL_TBL;
    p_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_TBL;
    p_old_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_TBL;
    p_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_TBL;
    p_old_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_TBL;
    p_Line_price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_TBL;
    p_old_Line_Price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_TBL;
    p_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_TBL;
    p_old_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_TBL;
    p_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_TBL;
    p_old_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_TBL;
    p_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_TBL;
    p_old_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_TBL;
    p_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_TBL;
    p_old_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_TBL;
    p_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_TBL;
    p_old_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_TBL;
    p_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_TBL;
    p_old_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_TBL;
    p_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type := OE_ORDER_PUB.G_MISS_REQUEST_TBL;
    x_header_val_rec OE_ORDER_PUB.Header_Val_Rec_Type;
    x_Header_Adj_tbl OE_ORDER_PUB.Header_Adj_Tbl_Type;
    x_Header_Adj_val_tbl OE_ORDER_PUB.Header_Adj_Val_Tbl_Type;
    x_Header_price_Att_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type;
    x_Header_Adj_Att_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type;
    x_Header_Adj_Assoc_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type;
    x_Header_Scredit_tbl OE_ORDER_PUB.Header_Scredit_Tbl_Type;
    x_Header_Scredit_val_tbl OE_ORDER_PUB.Header_Scredit_Val_Tbl_Type; 
    x_line_val_tbl OE_ORDER_PUB.Line_Val_Tbl_Type;
    x_Line_Adj_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type;
    x_Line_Adj_val_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type;
    x_Line_price_Att_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type;
    x_Line_Adj_Att_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type;
    x_Line_Adj_Assoc_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type;
    x_Line_Scredit_tbl OE_ORDER_PUB.Line_Scredit_Tbl_Type;
    x_Line_Scredit_val_tbl OE_ORDER_PUB.Line_Scredit_Val_Tbl_Type;
    x_Lot_Serial_tbl OE_ORDER_PUB.Lot_Serial_Tbl_Type;
    x_Lot_Serial_val_tbl OE_ORDER_PUB.Lot_Serial_Val_Tbl_Type;
    x_action_request_tbl OE_ORDER_PUB.Request_Tbl_Type; 
    X_DEBUG_FILE VARCHAR2(100);
    l_line_tbl_index NUMBER;
    l_msg_index_out NUMBER(10);
    BEGIN
    oe_debug_pub.debug_on;
    DBMS_APPLICATION_INFO.set_client_info (121);
    dbms_output.enable(1000000);
    fnd_global.apps_initialize(2787,50703,660); -- pass in user_id, responsibility_id, and application_id
    oe_msg_pub.initialize;
    oe_debug_pub.initialize;
    MO_GLOBAL.init('ONT');
    X_DEBUG_FILE := OE_DEBUG_PUB.Set_Debug_Mode('FILE');
    oe_debug_pub.SetDebugLevel(5); -- Use 5 for the most debuging output, I warn you its a lot of data
    dbms_output.put_line('START OF NEW DEBUG');
    --This is to CREATE an order header and an order line
    --Create Header record
    --Initialize header record to missing
    l_header_rec := OE_ORDER_PUB.G_MISS_HEADER_REC;
    l_header_rec.pricing_date := SYSDATE;
    l_header_rec.sold_to_org_id := 2096;
    l_header_rec.ordered_date := SYSDATE;
    l_header_rec.sold_from_org_id := 121     ;
    l_header_rec.salesrep_id := -3;
    l_header_rec.order_type_id := 1003;
    l_header_rec.operation := OE_GLOBALS.G_OPR_CREATE;
    l_line_tbl_index :=1;
    -- FIRST LINE RECORD
    -- Initialize record to missing
    l_line_tbl(l_line_tbl_index) := OE_ORDER_PUB.G_MISS_LINE_REC;
    -- Line attributes
    l_line_tbl(l_line_tbl_index).inventory_item_id := 124516;
    l_line_tbl(l_line_tbl_index).ordered_quantity := 500;
    l_line_tbl(l_line_tbl_index).ship_from_org_id := 563;
    l_line_tbl(l_line_tbl_index).operation := OE_GLOBALS.G_OPR_CREATE;
    -- CALL TO PROCESS ORDER Check the return status and then commit.
    OE_ORDER_PUB.process_order (
      p_api_version_number => 1.0
      , p_init_msg_list => fnd_api.g_false
      , p_return_values => fnd_api.g_false
      , p_action_commit => fnd_api.g_false
      , x_return_status => l_return_status
      , x_msg_count => l_msg_count
      , x_msg_data => l_msg_data
      , p_header_rec => l_header_rec
      , p_line_tbl => l_line_tbl
      , p_action_request_tbl => l_action_request_tbl
       -- OUT PARAMETERS
      , x_header_rec => l_header_rec1
      , x_header_val_rec => x_header_val_rec
      , x_Header_Adj_tbl => x_Header_Adj_tbl
      , x_Header_Adj_val_tbl => x_Header_Adj_val_tbl
      , x_Header_price_Att_tbl => x_Header_price_Att_tbl
      , x_Header_Adj_Att_tbl => x_Header_Adj_Att_tbl
      , x_Header_Adj_Assoc_tbl => x_Header_Adj_Assoc_tbl
      , x_Header_Scredit_tbl => x_Header_Scredit_tbl
      , x_Header_Scredit_val_tbl => x_Header_Scredit_val_tbl
      , x_line_tbl => l_line_tbl1
      , x_line_val_tbl => x_line_val_tbl
      , x_Line_Adj_tbl => x_Line_Adj_tbl
      , x_Line_Adj_val_tbl => x_Line_Adj_val_tbl
      , x_Line_price_Att_tbl => x_Line_price_Att_tbl
      , x_Line_Adj_Att_tbl => x_Line_Adj_Att_tbl
      , x_Line_Adj_Assoc_tbl => x_Line_Adj_Assoc_tbl
      , x_Line_Scredit_tbl => x_Line_Scredit_tbl
      , x_Line_Scredit_val_tbl => x_Line_Scredit_val_tbl
      , x_Lot_Serial_tbl => x_Lot_Serial_tbl
      , x_Lot_Serial_val_tbl => x_Lot_Serial_val_tbl
      , x_action_request_tbl => l_action_request_tbl
      dbms_output.put_line('OM Debug file: ' ||oe_debug_pub.G_DIR||'/'||oe_debug_pub.G_FILE); 
      oe_debug_pub.debug_off;
      -- Retrieve messages
      FOR i IN 1 .. l_msg_count
      LOOP
       Oe_Msg_Pub.get( p_msg_index => i
        , p_encoded => Fnd_Api.G_FALSE
        , p_data => l_msg_data
        , p_msg_index_out => l_msg_index_out);
       DBMS_OUTPUT.PUT_LINE('message is: ' || l_msg_data);
       DBMS_OUTPUT.PUT_LINE('message index is: ' || l_msg_index_out);
      END LOOP;
    -- Check the return status
    IF l_return_status = FND_API.G_RET_STS_SUCCESS
    THEN
      dbms_output.put_line('Process Order Sucess');
      dbms_output.put_line('new Header id:' || l_header_rec1.header_id);
    ELSE
      dbms_output.put_line('Failed');
    END IF;
    Commit;
    END; Regards
    knick

    Kinck
    The same script worked for me in vision (R12.1). You may have issues with your defaulting of a number of attributes that you are not passing in the API (like price list, line type and so on). You may want to check them.
    Thanks
    Nagamohan

  • Updating the User Status in Sales Order Item

    Dear Gurus,
    Iam trying to update the User Status on the SO item using STATUS_CHANGE_EXTERN function module and the status is successfully getting updated.
    But the problem is if Iam updating the status it has to delete the Purchase Requisition assgined to it, which is not happening.. whereas when Iam manually changing the Status, the PR is getting deleted.. Can anyone suggest some other function module or some other way of doing it other than BDC?
    Best Regards,
    Sreenivas.

    Hi ,
    I am also need to update the Item user status. Could you please provide me the logic for the FM 'STATUS_CHANGE_EXTERN'. And also let me know the where we need to write the logic in VA01/VA02.
    It would be helpful me a lot.
    Thanks
    Srihari.

  • Remove the user status in Sales order

    how to remove the user status in sales order header? could you give the function module or BAPI to get this?

    Hi,
    You Can try this-
    BAPI_SALESORDER_CHANGE,
    FM 'I_CHANGE_STATUS'
    Regards,
    Sujit

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • I have read all the questions regarding the "Can't send photo using iMessage".

    I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
    It will try to send but it will get stuck just before it sends
    and the red ! will appear with the "Not Delivered" status.
    When i tap on the !, it just says "This iMessage was not delived".
    No other message or photo is sending as the same time as the photo.
    I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
    What's wrong?!?!?!?!

    It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Maybe you are looking for