Regarding the routine in infopackage

Hi Experts,
I have an infopackage with only full load update,i am loading a daily load into the target with that ..now what i want to know is that i want to create a routine in infopackage so that it deletes the previous day data automatically ..so that if i am loading todays data it wont be duplicated..so can any one give me the code and step by step ways to do that ..i would appreciate the answers and assign maximum points for the valuable one...
regards,
Rk

If it is going to be full load, you have some options like:-
a. At Infopackage Level:- Under the data-targets tab, you have a check box for deleting the targets contents before loading, if you check that tab, the data will be deleted automatically before loading.
But beware that ALL data will be deleted and only today's data will remain there.
b. Process Chains:- If your selections are same, you can use a process type "Delete Overlapping Request" in the process chain, and it will delete the contents before reloading them.
Hope this helps.
Cheers,
Sumit

Similar Messages

An issue regarding the routines in a transformation rule

Hi experts,
I have two fields in my transformation rule which i fill through characteristic routines. The second routine needs information provided by the first routine. For example:
First char. A
Sec. char. B
In the routine for B i am using the field A which has to be filled in this moment through the first routine for a certain assignment.
The problem is that i recognized that i get here the wrong assignment because in this moment in which the routine B is running the information provided by routine A is still not there. So i have analyzed and saw that the char. B has the position 25 in the transformation rule and the char. A has the position 27. Does it really mean that in the loading the char. B is filled at first and the char. A after that because of the order? Is that the problem why I don't still have information of char. A while i am filling char. B?
If yes has anyone a good idea how to handle it? The further problem is that we can not change the order because the cube is filled and we have to delete the data at first in order to do it and it is not possible at the moment.
I would really appreciate it.
Thank you in advance.
Kind regards,
Ali

Hi,
AS we do not know what logic you are trying to write in field level routine so its pretty difficult to understand the scenario.
I can suggest you to write the same logic in END Routine based on your requirement.
Share your logic and code for more inputs.
Hope it helps.
Regards,
AL

What is use of routine in Infopackage screen

Hi,
What is use of routine in Infopackage screen.
can anyone provide me a scenerio.
Thanks,
cheta.

Yes they are very helpful...
I will explain you one scenario....
Because of certain irregularities in the system, I have to take a full upload everyday from 1st Apr 2007 to the current date...earlier I was extracting that data manually because I have to give the current date in the "TO" field....now my From date is 1st April 2007 and From Date is Sy-Datum...now this package is scheduled and I have removed the manual intervention.
Hope this clears you.
Regards
Gajendra

Routine in Infopackage data selection doesnt give appropriate results...

Hi Gurus,
I need to pull data into PSA (BW 3.5) based on a certain selections in the Infopackage. Selection is based on specific values of Infoobject 0PLANT , however, as these values are multiple and do not fall in a specific range I have written a routine to derive these values.
The routine does the following steps :
- creates an internal table from /bio/mplant and deletes the plant values that I do not wish to consider in the extraction.
- delete data from l_t_range for fieldname = 'PLANT'
- Appends data from the internal table to l_t_range.
However, when I execute the infopackage, the extraction is done for ALL the 0PLANT values i.e it includes the data for 0PLANT value which have been delete from the internal table.
My routine is :
$$ end of global - insert your declaration only before this line   -
    InfoObject      = 0PLANT
    Fieldname       = PLANT
    data type       = CHAR
    length          = 000004
    convexit        =
form compute_PLANT
tables   l_t_range      structure rssdlrange
using    p_infopackage type rslogdpid
           p_fieldname    type rsfnm
changing p_subrc        like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
TYPES ls_range like l_t_range.
data: l_idx like sy-tabix.
DATA: lt_plant like /bi0/mplant OCCURS 0 with header line.
          SELECT PLANT from /bi0/mplant into lt_Plant WHERE objvers = 'A
          ENDSELECT.
          delete lt_plant WHERE plant = 'W206'.
          delete lt_plant WHERE plant = 'WF11'.
          delete lt_plant WHERE plant = 'W945'.
          DELETE lt_plant WHERE plant = 'W530'.
          read table l_t_range with key
               fieldname = 'PLANT'.
          l_idx = sy-tabix.
          DELETE l_t_range where fieldname = 'PLANT'.
          Loop at lt_plant.
                l_t_range-sign = 'I' .
                l_t_range-low = lt_plant-plant.
                l_t_range-OPTION = 'EQ'.
                append l_t_range.
          endloop.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
Any bugs in the routines ?

try this one:
Loop at lt_plant.
if lt_plant-plant ne 'WF11' or lt_plant-plant ne 'W945' or lt_plant-plant ne 'W530'.
l_t_range-sign = 'I' .
l_t_range-low = lt_plant-plant.
l_t_range-OPTION = 'EQ'.
append l_t_range.
endif.
endloop.
or
don't use a table with header ( use a standard table and use a work area to access the table ) and do an other select like this:
SELECT PLANT from /bi0/mplant
into corresponding fields of table lt_Plant
WHERE objvers = 'A
and plant ne 'WF11'
and plant ne 'W945'
and plant ne 'W530'.
I hope it helps...
Kind regard.
Tobias
Edited by: Tobias Kreuser on Aug 23, 2010 11:34 AM

Routine in Infopackage - Extraction

Hi All,
I want to know ; How to write Routine in the Infopackage Extraction?
I know that we can write Routine in Infopackage extraction.
PLease let me know the steps.
Regards,
Macwan James.

Hi
In ifopackage we use routine for selection, please find below threads related to this which will be helpfull to you:
Infopackage Selections Tab-OLAP Variable/ABAP Routine
ABAP Routine correction in the selections fields of a Infopackage
Re: how to write routine for infopackage
Regards
Ravi

*** Abap Routine in Infopackage selection ***

Hi !!!
I have the scenario below:
I have created an infoobject called CAEMPFF. In the infopackage selection under field 0COMP_CODE I want to create an abap rotine to read all vaules filled in CAEMPFF.
How can I do that using abap routine ?
Thanks in advance,
Leandro.

Hi Leandro,
In the infopackage, under 0comp_code (or probably field BUKRS if it's an ERP datasource), you should select ABAP routine (6) under Type field. Then, you'll be prompted to create the routine.
There you should create a program that reads all the values of your infoobject master data table.
Hope this helps.
Regards,
Diego

Debug abap routine in infopackage

Hi experts,
What is the easiest way to debug an abap routine used in the infopackage for dynamic selection? When I go into the code I cannot place a breakpoint. Optionally I can do a /h before hitting the schedule button but what can I look for to go directly to my abap code?
mark

HI
Below is an excerpt from a reply by AHP few months back
put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
and when run infopackage, go to sm50,
on that process, menu program->debug program,
in debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps.
Regards
Prakash

Include for Routine in Infopackages

Hi All,
i created a routine in infopackage. The extraction is working as expected.
We have several Infopackages which should work with the same logic. That means i have to copy the routine in all IP.
I would like to avoid that by inserting the routine in an include so that by changing something, the chnage should be central.
I could i do it?
Thanks

Hello,
you can write a universal routine in se38 and call it in all your IP. You can also implement OOPs concept and use a global class for your requirement. Goto tcode SE24 and declare the class with methods. Call this class in all your IP.\
Else you can write a global routine in SE38 (INCLUDE) and call this include in all your IP. This what we are doing in our project where we need to implement the same logic in all 10 IPs. We declared a subroutine and call this subroutine every where.
Regards,
satyam

ABAP routine at Infopackage selection options

Dear all,
I need to write ABAP Routine at InfoPackage Selection Options.
Requirement is to bring only the versions (contains 2 characters) starting with 'C'.
Ex. I need versions CR, CP...
Code template is the following:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'VERSB'.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
Can anybody help me to resolve this?
Regards

Hi,
here is an example:
DATA: string(40) TYPE c.
CONCATENATE 'C' '%' INTO string.
SELECT *
FROM /bi0/hwbs_elemt
INTO TABLE lt_hwbs_elemt
WHERE nodename LIKE string.
Best regards,
Frank

DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.

Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky.

ABAP routine in infopackage that runs function in ECC

Hi All
I need to have dynamic filter in the info package
I have program in ECC that brings me the value that I need to filter in my info packege
I want to use ABAP routine in infopackage that runs function in ECC and brings the value that was received from the ECC function
Is that possible?
Thanks

Hi All
my CTO found the following option
function module that is "remote-enabled module "
then you call CALL FUNCTION 'Y_FM_IDOC_CATSDB' DESTINATION 'SAP4.7E'
you need to define it in SM59
code example
data: BEGIN OF IT_SOBSL OCCURS 0,
      SOBSL(2),
      END OF IT_SOBSL.
DATA: ls_range type STANDARD TABLE OF rssdlrange WITH HEADER LINE.
SELECT /BIC/ZSPEPROCI FROM /BIC/SZSPEPROCI INTO TABLE IT_SOBSL
                      WHERE /BIC/ZSPEPROCI NOT BETWEEN 'AA' AND 'ZZ'
                      AND /bic/zspeproci ne '' .
BREAK-POINT.
LOOP AT IT_SOBSL.
ls_range-IOBJNM = 'SOBSL'.
ls_range-LOW = IT_SOBSL-SOBSL.
ls_range-SIGN = 'I'.
ls_range-OPTION = 'EQ'.
APPEND ls_range .
ENDLOOP.
loop at ls_range.
append ls_range to l_t_range.
endloop.

ABAP Routine in InfoPackage for selection

Hello,
I have 2 InfoPackages for loading from ODS1 to ODS2. InfoPackage 1 is restricted via ABAP Routine to load only certain customer numbers.
InfoPackage 2 is supposed to load all other customer numbers - therefore the ABAP Routine makes ranges that exclude the customer numbers selected in InfoPackage 1.
Now I face the fact that the selection of InfoPackage 2 is much to small in numbers. Problem is, the ranges only work when entered manually - but via ABAP entry these ranges don`t work. I can`t understand why this problem happens. Do you have an idea?
Example (first number is from, 2nd number is to)
InfoPackage 1: customer numbers
5| 5
100|100
999|999
InfoPackage 2: customer numbers
0|4
4|99
101|998
1000|99999
But selection of InfoPackage 2 does not work propberly...
Thanks for your help,
Angelika

Hi,
no, that was just a typing mistake. Sorry.
The problem is, that in Monitoring I can see the selection and it looks good.
But when I check the number of datasets selected it is far to small. Therefore I don`t believe the selection works.
I tried manually to put all the ranges selected by ABAP Routine in InfoPackage 2 in another InfoPackage 3 - the selection is identically to InfoPackage 2 (but not made via ABAP, but manually) and in Monitoring the selection looks absolutly alike.
But the manuall InfoPackage 3 selects far more records than InfoPackage 2.
I can`t understand the problem. Can you? Can you give me advice?
Thanks,
Angelika

Routine in Infopackage not working

Hi all..
I wrote a routine in Infopackage with the selection Abap routine 6. for some reason the code is not selecting..i mean if the code has to get fisc year 2007, instead its getting all the records from all the years. i tested out the code in abap se38, it works fine, the function module is working fine, i am missing something here in infopackage, can anyone please let me know.
Here is the code.
data: l_idx like sy-tabix,
        Year type /BIC/CS8ZCBFCOPA-FISCYEAR.
data : begin of itab occurs 0.
include structure /BIC/PZOCDPYCTA.
data : end of itab.
CALL FUNCTION 'ZBW_GET_FY_PKG_SELECTIONS'
    EXPORTING
      VTYPE     = '010'
    IMPORTING
      ZOCDPYCTA = itab.
loop at itab.
read table l_t_range with key
       fieldname = 'FISCYEAR'.
l_idx = sy-tabix.
l_t_range-SIGN = ' I '.
l_t_range-OPTION = ' EQ '.
l_t_range-LOW = itab-FISCYEAR.
modify l_t_range index l_idx.
endloop.
p_subrc = 0.
The FM takes the input as 010 and gets all the records related to that..which is 2007 year records instead its getting all the records from all years..please help me.
Thanks
Vj

Check the monitor to see what values are entered as the restrictions in the infopackages for fiscal year. if the correct values don't show up in the monitor you know the routine is the problem and not a system bug.
Also, you may want to consider doing a range if the multiple single values isnt working.

Capturing line items in the routine-mail order sending problem

Hi
I am sending Sales Order Output to the Email.
I have configured the output type Using Option 'External Send' Option.
But the Problem is Whenever there are blocks for Sales Order Email Should not be send.
1.    When there is a block in Sales Order Header, then no email should be sent.
2.    Similary when there is a block Sales Order Item , then no email should be sent.
There is some standard routine attached to Outputtype Procedures .
First Condition we can met using routine, in the routine if the block is there , then no output will
be triggered.
But in the same routine we couldn't able to capture item level data to validate the second condition.
If anybody is having the idea to validate second condition, Please help me.
Thanks&Regards
(YUGANDHAR.P)

hi check this simple example which is sending the sales order email........
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
             con_tab(5) TYPE c VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.
regards,
venkat

Needed the functionality of the routine PROCESS_BAI_FILE

needed the functionality of the routine PROCESS_BAI_FILE in the standard program RFEBLB20

Hi,
Please close your current powershell console, and start a new Window, and then check the result.
Like David replied, this is a strange issue, hard to find the cuase, but I will report the issue, hope
someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support

Regarding the routine in infopackage

Similar Messages

Maybe you are looking for