Regards the ipad2 and iOS5.1

Have, under the direction of apple, updated the software on my 4 month old ipad2. Since then the ipad appears to take on a mind of its own at some times, opening up programmes, playing my music, locking up, not allowing me to use other applications. At this momemt am tempted to return it to the supplier as it is still well within its warrenty! Any one got any suggestions!

Have you tried a reset to see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

I was trying to do a favor for my gf, and I uninstalled bonjour. What are my next steps with the cloud and ios5

I was trying to do a favor for my gf, and I accidentily on purpose uninstalled bonjour. It has seemed to really screw up iTunes for me. What are my next steps to get this back to normal? I have downloaded and using the icloud and ios5. I have two iPhones 3gs and our iPad2. And our computer is windows xp(yes it is time for an upgrade)

Try the troubleshooting help here. http://www.apple.com/support/iphone/assistant/phone/
You may need to restore your iPhone.
If it won't restore, try here. http://support.apple.com/kb/ht1808
If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange.

If you are traveling in Europe, do you need both an adapter AND a voltage regulator to charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

If you are traveling in Europe, do you need both an adapter AND a voltage convertoro charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

You may only need adapters for the different kind of sockets, depending of the country you want to travel. A voltage converter is not needed.
The Apple power units are multi voltage devices, supporting a range from 110 V to 240 V. as you can see on the labels. O.K. for most of the labels you need a magnifier, but its on them.
Have a pleasnt journey
Lupunus

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

When i plug in my iPad2, iPhoto comes on not iTunes. I see iPad in system profiler under USB. I have reset, removed and re-downloaded iTunes. When I download iTunes it works until the next time i plug in the iPad2 and then the same thing all over.

When i plug in my iPad2, iPhoto comes on not iTunes. I see iPad in system profiler under USB. I have reset, removed and re-downloaded iTunes. When I download iTunes it works until the next time i plug in the iPad2 and then the same thing all over.

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I have down loaded the latest software for the ipad2 and it has now locked up and will not reset

I have just down loaded the lastest software for the iPad2 and the Pad is now frozen. I have tried the reset and nothing happens. Help

This page has some troubleshooting for problems when updating/restoring the iPad : http://support.apple.com/kb/ht4097

Regarding the Customer and Vendor insurance

Hi Gurus,
My client is dealing with food materials,the requirement of the client is he will take an insurance policy say for 1cr and is valid accross India.The moment any sale or purchase takes place and which is transported in a truck,the invoiced amount should be automatically deducted from the policy and the system should warn them if the amount or validity date is near lapse so that they can renew the policy.
If any customer is picking the goods then the amount should not be deducted from the policy.Can anyone please help me in this issue.
Thanks in advance,
Ramesh.
Edited by: malladirb on Jul 28, 2011 7:18 AM
Edited by: malladirb on Jul 29, 2011 11:37 AM

Dear Sreenivas,
My client deals with food materials.He buys the raw materials from farms and transports from different locations to the main plant where the material is processed.Similar is the scenario with the sales.The customers of the Client r in different locations in the country.The requirement here is,if the client sells or procures any material which involves transportation by a truck (in case of any accident taking place) he can claim the insurance for the amount.
What ever the amount which is invoiced in the above explained scenarios should be deducted from the insurance policy which is an Inland Transit Insurance policy and similar is the case with the expots also.
I hope my explanation is clear to u.
Thanks & Regards,
Ramesh.

To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
Regards

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

Regarding the focusGained and iteratorBindingChange events

Dear Jdev/JClient team,
I'm trying to build up a self-style API based upon the
JClient classes to emulate more or less the mechanisms
of the Developer tool. My first efforts were to match
next concepts:
JUApplication <---> Application (Frame)
JPanelBinding <---> Form
JUIteratorBinding <---> Block
Moreover, I'm using my own toolbar that I want it to
act at application level. This toolbar uses the
JUActionBinding dynamically because it's able to target
the current panel binding "in focus". I'm also intercepting
the focusGained events to perform the typical navigation
triggers in Developer: WHEN-NEW-ITEM-INSTANCE,
WHEN-NEW-RECORD-INSTANCE, WHEN-NEW-BLOCK-INSTANCE and
WHEN-NEW-FORM-INSTANCE.
In this context, I have some major concerns:
1) I've reading about the next 9.0.3 version, and I'm very
interested, and quite worried, about possible changes
in the way the focusGained and iteratorBindingChange
events will be delivered. I mean, these events will be
delivered in the same situations in the next version??
Knowledge about this is vital due to the fact that my
API relies in the JClient current behavior.
2) Regarding the structure of bindings, I've read and
I've seen that the JPanelBinding really don't act
at "Form" level. That is, you can associate all your
panels to only one JPanelBinding. However, I prefer
to use one JPanelBinding for each "Form". In this
context, I have the next particular problem. I have
two or more JUPanelBinding and I have a class that
implements the JUNavigationBarInterface to track
the current JUIteratorBinding by registering itself to
all these JUPanelBinding, and one of these JUPanelBinding
has only one JUIteratorBinding. In this case, when
I navigate to this last JUPanelBinding from another one
I don't receive the iteratorBindingChange event.
Browsing the source code this is "normal" because a
JUPanelBinding with only one JUIteratorBinding is
expected to delivered this event once. However, this
mechanism seems very restrictive (or maybe a bug). The
problem seems to be that the standard toolbar are
expected to receive these events and track the iterator
binding, and this standard toolbar only acts at
JUIteratorBinding or JUPanelBinding level. Nevertheless,
I want a toolbar that can share all the panel bindings!!
Is this something you plan to change in 9.0.3? is this
a bug? a non-supported functionality? What can I do?
I'm thinking in ignoring the iteratorBindingChange
events and generating them by myself upon receiving
the focusGained events which act at JUApplication level.
Is this a good idea? Will this be compatible with 9.0.3?
The next piece of code is part of the current implementation
of the JUPanelBinding. You can see that the mNavBarInit
variable make the class to only deliver the iteratorBindingChange
event once if we have only one JUIteratorBinding. This is
issue I'm referring to.
public void focusGained(...)
if (mNavigationBarList != null)
JUIteratorBinding currentIter = null;
ArrayList al = getIterBindingList();
if (al.size() > 1)
//this could be optimized by keeping track of current iterator.
currentIter = iterBinding;
else if (!mNavBarInit)
mNavBarInit = true;
currentIter = (JUIteratorBinding)al.get(0);
if (currentIter != null)
al = mNavigationBarList;
for (int i = 0; i < al.size(); i++)
((JUNavigationBarInterface)al.get(i)).iteratorBindingChanged(currentIter);
I would appreciate any comments, advice or information you
can address to me.
Thanks in advance.
Jaume Espriu
Software engineer
[email protected]
SAME S.I. S.A.

1) I've reading about the next 9.0.3 version, and I'm very
interested, and quite worried, about possible changes
in the way the focusGained and iteratorBindingChange
events will be delivered. I mean, these events will be
delivered in the same situations in the next version??
Knowledge about this is vital due to the fact that my
API relies in the JClient current behavior. I'm not sure where you get the "impression" that raising of focusGained and iteratorBindingChanged events will be changed?
- focusGained is generated by Swing and should stay the same. JClient does not raise/block raising of this event.
- iteratorBindingChanged event is generated by JClient when the RowSetIterator for an iteratorBinding is changed
No bugs were fixed/resolved for this area of the code.
2) Regarding the structure of bindings, I've read and
I've seen that the JPanelBinding really don't act
at "Form" level. That is, you can associate all your
panels to only one JPanelBinding. However, I prefer
to use one JPanelBinding for each "Form". In this
context, I have the next particular problem. I have
two or more JUPanelBinding and I have a class that
implements the JUNavigationBarInterface to track
the current JUIteratorBinding by registering itself to
all these JUPanelBinding, and one of these JUPanelBinding
has only one JUIteratorBinding. In this case, when
I navigate to this last JUPanelBinding from another one
I don't receive the iteratorBindingChange event.
Browsing the source code this is "normal" because a
JUPanelBinding with only one JUIteratorBinding is
expected to delivered this event once. However, this
mechanism seems very restrictive (or maybe a bug). The
problem seems to be that the standard toolbar are
expected to receive these events and track the iterator
binding, and this standard toolbar only acts at
JUIteratorBinding or JUPanelBinding level. Nevertheless,
I want a toolbar that can share all the panel bindings!!
Is this something you plan to change in 9.0.3?No.
is this
a bug? a non-supported functionality? What can I do?You may want to implement some kind of focus changed mechanism where you "common" toolbar is notified of the current panel in focus so that it can then update it's iterator binding to current panel's iterator binding.
Default raising of the event iteratorBindingChanged(), is only within the context of one JUPanelBinding instance.
I'm thinking in ignoring the iteratorBindingChange
events and generating them by myself upon receiving
the focusGained events which act at JUApplication level.
Is this a good idea? Will this be compatible with 9.0.3?I believe so.
The next piece of code is part of the current implementation
of the JUPanelBinding. You can see that the mNavBarInit
variable make the class to only deliver the iteratorBindingChange
event once if we have only one JUIteratorBinding. This is
issue I'm referring to.
public void focusGained(...)
if (mNavigationBarList != null)
JUIteratorBinding currentIter = null;
ArrayList al = getIterBindingList();
if (al.size() > 1)
//this could be optimized by keeping track of current iterator.
currentIter = iterBinding;
else if (!mNavBarInit)
mNavBarInit = true;
currentIter = (JUIteratorBinding)al.get(0);
if (currentIter != null)
al = mNavigationBarList;
for (int i = 0; i < al.size(); i++)
((JUNavigationBarInterface)al.get(i)).iteratorBindingChanged(currentIter);
I would appreciate any comments, advice or information you
can address to me.
Thanks in advance.
Jaume Espriu
Software engineer
[email protected]
SAME S.I. S.A.

TS3217 Wher's my water has stopped working. We have both the free and paid versions on the IPAD2 and the paid version stopped working suddenly. I updated both the free and paid versions and the IOS and it still does not work(the free version works).

Where's my water suddenly stopped working. We have both the free and paid version installed and the free one works. The paid version fails during initilazation. Bothe have been updated from Itunes and the IPAD was rebooted. My wife playes it every day and yesterday it failed to run, any suggestions?

Are they apps?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod/iPad
BTW this is the iPod touch forum

Regarding the GR and the IR

Hi ,
Is there any way to relate the GR value and the IR value that is take for example
i have three GRs 10 20 50 for the first 10 and 20 an IR is created and for the third another seperate IR is created is there any way to match the IR and GR

hi,
go to purchasing doc ie ME23N, and then go to purchase history tab.
there you can see against which GR which Invoce is done.
to find PO for particular GR : go to Tcode migo - display - enter gr no.- in purchase order history tab - you get OP no.

I live out in the county where WiFi is not available. I don't have internet either. I have purchased the ipad2 and have been told that I can print from the ipad2 directly to the HP Officejet Pro 8500A eprint all-in-one. Is that true?

I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.

kathyfrompalmyra wrote:
I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.
Apple says that it will work.

How can I sync bookmarks from my iPad BACK to ie6? My laptop had a rebuild and I lost all of my ie6 favourites, but they ar still on my iPad as bookmarks - just can figure out how to transfer back. I have ipad2 and ios5

My laptop running ms and outlook had to be re-loaded and as a result I lost all of my Internet explorer favourites. As I run iTunes on my laptop I do have all of th favourites synced through iTunes to my ipad2. How can I reverse synch my ipad2 so that the bookmarks are transferred back to my outlook pc

Follow the instructions here > Learn how to set up iCloud on all your devices
Make sure you select, "Bookmarks" in the iCloud window.
"Outlook 2007 or 2010 is required for accessing iCloud email, contacts, and calendars. Safari 5.1.1 or Internet Explorer 8 or later is required for accessing bookmarks."

Regards the ipad2 and iOS5.1

Similar Messages

Maybe you are looking for