Regexp_like(source,pattern) to find and replace certain set of data

Hi,
Am having oracle 9i DB,
and created functions for regexp_replace and regex_like from the following link
http://phil-sqltips.blogspot.com/2009/06/regexpreplace-regexplike-for-oracle-9i.html
Am having a table
CREATE TABLE moto
MCC NUMBER,
HANDOVER CLOB
INSERT INTO MOTO ('40','40-064-3202-202-4221 40-64-101-1031 404-64-101-1291 40-064-3202-202-4222 ')here i need to write a select query to get the output as below
MCC, Handover
40,40-64-101-1031 404-64-101-1291
That is the data with 40-064 as first six characters in the handover column needs to be removed till the first space character (40-064-3202-202-4221 ).
pls advice how to go about this.?

Aemunathan wrote:
Hi,
Am having oracle 9i DB,
and created functions for regexp_replace and regex_like from the following link
http://phil-sqltips.blogspot.com/2009/06/regexpreplace-regexplike-for-oracle-9i.html
Am having a table
CREATE TABLE moto
MCC          NUMBER,
HANDOVER     CLOB
INSERT INTO MOTO ('40','40-064-3202-202-4221 40-64-101-1031 404-64-101-1291 40-064-3202-202-4222 ')here i need to write a select query to get the output as below
MCC, Handover
40,40-64-101-1031 404-64-101-1291
That is the data with 40-064 as first six characters in the handover column needs to be removed till the first space character (40-064-3202-202-4221 ).
pls advice how to go about this.?Check out this
1 with t
2 as (
3 select '40-064-3202-202-4221 40-64-101-1031 404-64-101-1291 40-064-3202-202-4222 ' col from dual)
4* select col,substr(col,instr(col,' ',1,1)+1) OUTPUT from t
SQL> /
COL                                                                       OUTPUT
40-064-3202-202-4221 40-64-101-1031 404-64-101-1291 40-064-3202-202-4222 40-64-101-1031 404-64-101-1291 40-064-3202-202-4222Is this the expected output??
Regards,
Achyut

Similar Messages

How to find and replace certain text in Excel.

I am new to Automator. And I would like some help how I can create a service that will allow me to find and replace certain text in Excel. I noticed that there is an action to do this for Word documents, but not for Excel documents.
Any suggestions how I can do this?
Thanks so much for your help.

Marga,
I think the best place to ask about Office for Mac would be in the MS forums.
Jerry

How to find and replace text in Excel with Automator

I am new to Automator. And I would like some help how I can create a service that will allow me to find and replace certain text in Excel. I noticed that there is an action to do this for Word documents, but not for Excel document.
Any suggestions how I can do this?
Thanks so much for your help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

Batch-find-and-replace.jsx

Hi there, I wrote a batch-processing script for find change queries and thought I share it with you. You can get it over here
You can process GREP, TEXT, GLYPH and OBJECT searches.
Purpouse
While creating books in InDesign with several documents we always come across some find change queries that need to be used again, and again, and again. To make this process easier you can just grab their names and put them into a list. The script will than try to process all your queries in one click.
prerequisites
make sure you have a toml file.
make sure the toml file is next to the script.
make sure the toml file has the right formatting (see below in section TOML)
if you want the script to autoexecute (without toml file selection), make sure the .toml file has the right name: "batch-find-and-replace.toml"
make sure your fcqueries work right
Usage
Place the script and the toml file into your Scripts Panel Folder
define some find and change queries and save them via the InDesign dialogue.
get the xml file names and add them to the "batch-find-and-replace.toml" file in the right spot. text search goes into text.files = [], grep search goes into grep.files = [] and so on. Make shure to remove the .xml from the filename. You can find these files on:
Mac OS Users[username]\Library\Preferences\Adobe InDesign[Version][Language]\Find-Change Queries[query type]
Windows XP Documents and Settings[username]\Application Data\Adobe\InDesign[Version][Language]\Find-Change Queries[query type]
Windows Vista and Windows 7 Users[username]\AppData\Roaming\Adobe\InDesign[Version][Language]\Find-Change Queries[query type]
the .toml file should be located next to the script file and have the appropriate name (batch-find-and-replace.toml). If so the script wont ask for the toml file and process the data right away. If not the script will ask you to select the .toml file.
Thats it. Watch the magick happen.
TOML
Tom's Obvious, Minimal Language is a simple markup language that makes settings human readable. It is still in development and may change a lot. But still. It is a pretty easy language and can be learned by anyone.
The basic toml filer looks like this:
# these are the basic settings
# the MUST be there
do_text = true
do_grep = true
do_glyph = true
do_object = false
# now the file names
# they have to be in one line
# the toml specs say you can break lines in arrays
# but the toml.js does not allow that at the moment
[text]
files = ["my_first_text_find_and_change","another one"]
[grep]
files = ["somegrepsearch", "find tabs", "something else"]
[glyph]
files = []
[objects]
files = []
MUST HAVE Settings
With the do_text, do_object, do_grep and do_glyph you can define if the script should do the corresponding find and replace. Set them to true or false.
CAN HAVE Settings
In the [text],[grep],[glyph] and [objects] areas you can define the filenames that should be processed. Make sure the filenames are written right. If there is a file mentioned that does not exist the script will throw an error. It will try to process all the .xml files it can find.
!IMPORTANT! you MUST remove the .xml from the filename in the list as shown above.
The Script is here --> https://raw.github.com/...find-and-replace.jsx
The basic .toml file here --> https://raw.github.com/...ind-and-replace.toml
The Readme here --> https://github.com/...lob/master/README.md
And the whole package here --> https://github.com/...e/archive/master.zip

Great script, it worked perfectly with grep, text, glyph, not only worked with OBJECTS, because I do the same operation and does not work. Can you give me a hand? Thank you.
In arquivo.toml is thus:
# These are the basic settings
# The MUST be there
do_text = true
do_grep = false
do_glyph = false
do_object = true
do_all_docs = false
# Now the file names
# They have to be in one line
# TomL the specs say you can break lines in arrays
# But does not allow the toml.js que momento
[text]
files = ["_OVER_BLACK_TXT", "_OVER_CORPROF_TXT"]
[grep]
files = []
[glyph]
files = []
[object]
files = ["_OVER_BLACK_FILL", "_OVER_BLACK_STRK"]
This is the image of the Scripts Panel folder:

VBA Word Find and Replace characters but excluding certain characters

I am trying to write VBA code in Word that I will eventually run from a VBA Excel module. The aim of the project is to find specific strings in the open Word document that have length of either one or two characters and are of a certain format, and replace
them with other strings in the same format. This is to do with transposing (i.e. changing the musical key) of chord symbols in a songsheet in Word. The Find and Replace strings are contained in ranges in an Excel workbook, which is why I want to eventually
run the code from Excel. I'm much more experienced in writing VBA code in Excel than in Word, and I'm fairly confident with transferring the 'Word VBA' code into an Excel module.
At the moment I'm trying out code entirely in Word, and I've come across a stumbling block. For example, I want it to Find "A" and replace with "B",
BUT only if the "A" is NOT followed by "#" (sharp) or "b" (flat).
Here is the code I've got in Word VBA, which I obtained by editing code produced by the recorder:
Sub F_R()
'Find text must have specific font
With Selection.Find.Font
.Bold = True
.Underline = wdUnderlineWords
.Superscript = False
.Subscript = False
End With
'Replacement text must have specific font
With Selection.Find.Replacement.Font
.Bold = True
.Underline = wdUnderlineWords
.Superscript = False
.Subscript = False
End With
'Find & Replace strings
With Selection.Find
.Text = "A" 'hard-coded here for testing, but this will
'eventually be referenced to a cell in Excel
.Replacement.Text = "B" 'hard-coded here for testing, but this will
'eventually be referenced to a cell in Excel
.Forward = True
.Wrap = wdFindContinue
.Format = True
.MatchCase = True
.MatchWholeWord = False
End With
Selection.Find.Execute Replace:=wdReplaceAll
End Sub
For the Find & Replace section I want to do something like:
With Selection.Find
.Text = "A"
.Text <> "A#"
.Text <> "Ab"
.Replacement.Text = "B"
End With
- but this produces a syntax error, presumably because you can have only one .Text line (or it won't accept <>?)
I tried adopting the way of excluding chars when using the Like operator, and while it compiles, it will not replace
any "A":
With Selection.Find
.Text = "A[!b#]"
.Replacement.Text = "B"
End With
I suspect that I'm going to have to change tack completely in the way I'm doing this. Do you have any suggestions, please?
The chord names/symbols are preceded/succeeded by either spaces or paragraph returns and can look like these, for example (all Font Bold and Underlined words only):
C7
Dm7
Eb-5
Bb+11
F#m7
i.e. [ABCDEFG][b # | optional][m |optional][- + | superscript, optional][2 3
5 6 7 9 11 13 | superscript, optional]
The crux of my problem is that the note A should be treated as entirely distinct from Ab or A# (and similar for other flattened/sharpened notes).
Sorry for long post.

Hi Ian,
It is not easy to find Microsoft forums. However this forum is for the Visual Studio Net version.
Try this forum for VBA.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=isvvba
Success
Cor

Find and replace source code

i have to change a menu in 100 sites. The find and replace
menu is helpful but.....the menu has Behaviors/Effects, the find
and replace tool has find and replaced to all sites but the effects
from the Behaviors won't work, and it shows me that the effects are
there in the Behaviors panel but when i pres F12 the effects are
not there.

I'm not sure I understand your question but please tell us
HOW you want to
change this menu? And do you *REALLY* mean 100 sites, or 100
files?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Edward82" <[email protected]> wrote in
message
news:fun8gm$58q$[email protected]..
>i have to change a menu in 100 sites. The find and
replace menu is helpful
> but.....the menu has Behaviors/Effects, the find and
replace tool has find
> and
> replaced to all sites but the effects from the Behaviors
won't work, and
> it
> shows me that the effects are there in the Behaviors
panel but when i pres
> F12
> the effects are not there.
>

How do I find and replace text in PHP files?

How can I in CS3 make sitewide changes to the text in PHP pages without changing variable names etc that have the same name?
For example if I have an installation of a PHP forum and I want to change every instance of the word 'forum' to 'message board'...
If I used the 'inside tag' search with " as the tag, then if "" contained a variable called 'forum' it would also be changed and therefore corrupt the code....
Is there a simple way around this?
Thanks!
I'm using CS3 on Windows Vista.

It looks like you're trying to find and replace source code, so you may be able to look at the various places that are looked at when finding and uncheck the ones that don't apply.
But, if it's all source code then that won't help. One thing that may work is to expand the search option - for example if the work "forum" that you're wanting to change it preceded by another word, or character or something that sets it apart, then do you find on that. You can expand that search phrase as far out in either direction that you need to to make it different, if of course that is practical in your situation.
The only other way I can think of is to somehow create an exception rule, but I'm not sure if that's possible or how to do it.

Using applescript for Find and Replace All in Pages 2.0

i saw that Pages 2.0 is scriptable
i try to create a script for merge use to find and replace all occurence of a certain string using a script but Pages doesn't seems to respond to "Find" even using "System Events"
how can i do to use this function with a script
Thanx for any help
S.B.
ibook G3 Mac OS X (10.4.6)

OK, here's another example. This one gets the text as a string and uses the offset property to find "[", presuming it to be a merge delimiter. (Pages' text doesn't support "offset of").
One failing of this scheme is that the offsets are incorrect if you have inline objects (pictures, shapes, tables, etc.). While it is probably possible to compensate for them, that's a trickier proposition.
<PRE>-- Example merge replacements:
property mergeText : {"[name]", "John Smith", "[address]", "1234 Anystreet"}
on lookup(mergeWord)
set theCount to count of mergeText
repeat with x from 1 to theCount by 2
if item x of mergeText = mergeWord then
return item (x + 1) of mergeText
end if
end repeat
-- If merge field is not found, delete it (replace it with the empty string)
return ""
end lookup
tell application "Pages"
repeat
tell body text of document 1
-- Get text as a string so that "offset of" can be used.
set allText to it as string
set startOffset to offset of "[" in allText
if (startOffset = 0) then
exit repeat
end if
set endOffset to offset of "]" in allText
select (text from character startOffset to character endOffset)
end tell
set mergeWord to contents of selection
tell me to lookup(mergeWord)
set replacement to result
set selection to replacement
if (replacement is "") then
-- Get rid of extra whitespace (space or return)
-- Do it in a "try" block to handle edge cases at start or end of text.
try
set theSel to (get selection)
set ch1 to character before theSel
set ch2 to character after theSel
if ((ch1 is " " or ch1 is return) and (ch2 is " " or ch2 is return)) then
select character after theSel
delete selection
end if
end try
end if
end repeat
end tell</PRE>
Titanium PowerBook Mac OS X (10.4.6)

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to use Microsoft Word's Find and Replace with HTML tags?

Hello to all!
I'm trying to figure out how to use the find and replace function in Word to replace html tags. I'd like to be able to change something like this:
random text
To something like this:
random text
I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly.
Anyone able to lend a hand?

Here is my latest regular expression with Perl. I think it matches the spirit of the request in the original post.
Note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html.
perl -0660pe 's^<[sS][pP][aA][nN]\s+class="B01-K-ITAL"\s*>(.*?)</[sS][pP][aA][nN]>^$1^gs' i.html >|o.html
input text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>
output text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>

How do you find and replace "within selected text" in a textedit document (version 1.8, mountain lion)

In the textedit version on Snow leopard it was possible to search and replace within a peice of selected text only i.e. not the entire file. This was a very useful feature because you could select a paragraph and replace all occurences of word1 with word2 within that paragraph only! This feature appears to be missing from the mountain lion version of textedit (version 1.8). Or can anyone tell me how to do it ... ?

Having 46 people view a post without replying is not unusual. Some people look at a question to see if it's something they'd like to know the answer to, and then come back when it has eventually been answered.
I'm not sure if you need to escape forward slashes in Dreamweaver's Find and Replace dialog box, but I normally do because both JavaScript and PHP normally use forward slashes as delimiters to mark the beginning and end of the regex like this:
var pattern = /[A-Z]{4}/; // JavaScript
$pattern = '/[A-Z]{4}/'; // PHP
When a forward slash appears inside the regex, you need to escape it with a backslash to avoid confusion with the closing delimiter.
As you have worked out, a capturing group is created by wrapping part of the regex in parentheses.
If you want to match exactly 38 characters, you can use [\S\s]{38}. That includes spaces, newline characters, symbols, everything.
If you're trying to find everything between two tags, you can do this:
(<\/tag_name>)([^<]+)
The closing tag is captured as $1 and everything up to the next opening tag is captured as $2.
Learning regular expressions is not easy. I don't claim to be an expert, but I enjoy the challenge of trying to solve them. If you're interested in regular expressions, there are several books published by O'Reilly. "Mastering Regular Expressions" is the ultimate authority, but it's a difficult read (not because it's badly written, but because of the complexity of the subject). "Regular Expressions Cookbook" is very good. There's also a new "Introducing Regular Expressions", but I haven't read it.

How can i find and replace xml tags?

Hi, i am using xml in my workflow and want to be able to remove certain tags if they contain particular text.
here is an example of my xml structure…
<entry>
 <name>DEFAULT</name>
 <tel>DEFAULT</tel>
 <address>DEFAULT</address>
</entry>
I am using this initial structure to set the paragraph styles to be followed when the xml data is imported.
This leaves DEFAULT in place wherever an entry doesn't have any content for that field.
I want to be able to import my XML then run a script that removes any tags that include DEFAULT, - I need the entire xml tag to be removed not just the text, if i do a normal find and replace it will only remove the text not the tags which is causing problems with styling. I also want to remove the end of para/return (^p) that i've placed at the end of the line. So it would be the same as opening up story editor and removing the content + tags + hard return in there, but i want to automate the process…
So i think this is what i need to search for in each case
"<name>DEFAULT</name>^p"
and i want to replace it with nothing ""
Can this be done through scripting (ideally javascript)?
I have a little knowledge of javascript but am not sure how to search and target that kind of string in indesign...
using indesign cs5
many thanks

Hi,
Script should do it in two steps:
1. find all occurences of i.e. ">DEFAULT<"
2. remove whole paragraph which is a found_text's container.
For example this way -JS - (a textFrame filled with your text should be selected) :
var mStory = app.selection[0].parentStory;
app.findTextPreferences = null;
app.findTextPreferences.findWhat = ">DEFAULT<";
var myF = mStory.findText();
var count = myF.length;
while (count--)
 myF[count].paragraphs[0].remove();
rgds

Is there a script to find and replace glyphs?

I am using Adobe Illustrator CC 2014, Build 10.1.0.70.
I am looking for a way to quickly find and change certain glyphs within a typeface much like InDesign's Find/Change feature with a script that runs through saved queries. Is this at all possible..?

Hi Steve, thanks for your quick response.
My apologies I should've made myself clearer... I was more thinking about a script to run a chain of preset saved find and replace queries together. I have 48 individual glyphs from one typeface that I need to consistently apply across whole ducunents. Rather than click through each glyph for every single document I come across I was hoping there was a way to automate the process.
Thanks

Dreamweaver CS6 "Find and Replace" not working

Since I've started working in DW CS6 I've noticed that the Find and Replace feature isn't working completely.
E.g. If I select a block of code, then open Find and Replace, tell it to find " " and replace it with "</li>" it only replaces the first instance. The rest of the 's are still 's.
Is this happening to anyone else? I may have to switch back to CS5.

bracdiver wrote:
** ANSWER/Workaround
Change the selection in the 'Search:' dropdown from the default 'Source:' to 'Text' or 'Text (Advanced)' and you will get the desired result.
bracdiver, your post may be useful in some examples, like the ones I posted above. However, this does not work in my intended example below (which is source code specific), where the actual source code needs to be replaced:
Sample
 These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen</li>
 <li>35% of people are going to school.</li>
 <li>There are seven books in the Harry Potter series.</li>
 <li>The longest running play is "Les Miserables"</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
Using these options
Find in: Selected Text (first four list items)
Search: Source code:
Find: </li>
Replace: ___________________</li>
Options enabled: Match case
Desired output:
These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen ___________________</li>
 <li>35% of people are going to school. ___________________</li>
 <li>There are seven books in the Harry Potter series. ___________________</li>
 <li>The longest running play is "Les Miserables" ___________________</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
CS6 DW output:
These are true or false questions. Place your answer on the blank under each question.
<ol>
 <li>There are twelve in a baker's dozen ___________________</li>
 <li>35% of people are going to school.</li>
 <li>There are seven books in the Harry Potter series.</li>
 <li>The longest running play is "Les Miserables"</li>
 <li>There is no blank under this question. Answer beside this question instead.</li>
</ol>
Using your workaround (with 'Inside Tag' option set to li), this will not work as does not change any text at all.

Automatic Find and Replace

Is there any way to apply some kind of macro in CS3 that
would automatically run a list of commands to change things such as
specific strings of text to specific links I define. For example
any time the words "Jeff Jefferson" come up in my Dream Weaver HTML
file they are automatically changed to a link (to bio page) of
"Jeff Jefferson"?
I know I can save my find and replace as a query but is there
a quicker way that can run a list of these find and replace
commands with a single push of a button?
Thanks!

booova wrote:
>
> I know I can save my find and replace as a query but is
there a quicker way
> that can run a list of these find and replace commands
with a single push of a
> button?
>
Once you have saved the search pattern, you can, if you wish,
with one
push of a button, apply the search and replace to all of the
web pages
residing on your computer.
Mick

Regexp_like(source,pattern) to find and replace certain set of data

Similar Messages

Maybe you are looking for