Registry LDAP - Multiple search bases x single search base

Hi all,
I have a doubt, in my scenario I have two LDAP domains and isn't clear to me if I need to use the Oracle Registry configured to multiple search or single search. In the documentation the explanation is: To use single configuration when you have one single search base and to use multiple configuration when you hava multiple search bases, besides that, the Registry documentation says multiple search bases scenario it will looking for a user in all domains, in case a domain isn't specified by the user. The questions are what the diference between single and multiple configuration and what is a search base?
Any idea,
Afonso

Hi BBCR,
I'm not sure if the use of groups provides a solution to this requirement. One way to do it would be to define attribute access controls using a filter with substitution syntax. For example, you could have a filter for Modify access on a user's attributes defined like:
(&(o=$o$)(admin=true))
which means that anyone who has a value of the "o" attribute the same as the target user AND has a value of "true" for the admin attribute can write to those attributes. You can also add Self as a role so that users can view/modify their own attributes.
The above filter means that instead of defining group membership and group admin membership, you manipulate attribute values in users profiles to say whether or not a user is an admin, and which users they administer (all users which share the same value of the "o" attribute, in the above case).
Would something like this be an option?
Regards,
Colin

Similar Messages

Multiple Field as a Part of the Single Search

WOW, Jheadstart is the way to go!!
Here is a quick question to expedite my learning process if you don't mind since my customer needs to see something in couple of weeks.
I created a single search screen from a group based on what has been generated by the Jheadstart Designer, but only one field is generated. Now, at this point, is there a way to have multiple field generated or I need to customize the generated JSP or UIX screen? Same things for the methods that are involved, will I need to customized certain Action Class methods to include to two attributes as a part of this search.
I thank you for your explanations and would greatly appreciate any sample codes available that you can refer to or explain.
Kamran

hi,Shalini.
Using Message directly, you can not achieve what you want easily.
Instead, i thought out one way, you can judge and check whether it can help you a little.
You don't use the Message manager directly, that means: don't display your message.
Now, you have one context attribute named "context_msg" which has type "String".
In addition, you have defined one Link-to-action UI element which is bound with the context attribute "context_msg".
When you get the message, use the following
message e001(ID) with <variable> into lw_msg.
or if you use Exception class
lw_msg = lo_exp->get_text( ).
Then you can set the context attribute "context_msg" with the "lw_msg".
Now, you can implement your action handler for the action of Link-to-action as you want, i.e. open another pop-up window.
I don't know whether it can fit your requirement or not.
Hope it can help you a little.
Best wishes.

Multiple search using a single box...

in a form i have got aroun 10 rows and 10 columns.....is it possible to search the forms for the required information(i.e 10 different columns) using a single search box

You can use colon in any database item on runtime in entery query mode and it will prompt you to enter values/conditions on execute query where you can check any database item value. It will add the conditions in the where clause of the block. May be it will help in what you are looking for.

Multipe AD yet Single Search Scope - CUCM/CUC

Hi all,
Wondering if anyone has had experience integrating mutiple ADs (different forests and domains) with a single CUCM. The CUCM has a limit of 5 ldap directories but even more impotantly only a single search scope.
The following document describes using ADLDS which would solve the multiple AD scenario but would this solve the single search scope issue as well (same goes for CUC)?
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b2b103.shtml
Any pointers appreciated.
Thanks,
Kamran

Hi Chris,
Thanks tip, thats the solution i was alluding to above. It would solve the 5 ldap directory limit issue but I am not clear about the single search scope limitation.
From my testing, it seems that the LDAP would sync multiple ADs (in their own domains) into a separate partition - will try to get some screenshots. So my questions are:
1) Is this correct? would ADLDS sync separete ADs (in separate domains) in a separate partition? I am basing this on an assumption we will need to run the ADLDS sync with all ADs separately.
2) Where do we point our search scope on the ADLDS so that it syncs all ADs sync'ed to the ADLDS?
Thanks,
Kamrna

Single search help MAT1L looses matchcodes

A client asked to limit the MAT1 help for some users. We implemented succesfully a single search help with MAT0M (by erasing all others from shlp_tab) and filters by maktl and t023-begru (which has a very usefull authorization object).
Now he asked to add a second help window, and I've met an anoying difficulty. If I add the MAT1L and keep the MAT0M, I get the two help tabs, but the MAT1L help doesn't use my MAT1 user exit function. If I delete the MAT0M and keep only the MAT1L, that help uses my MAT1 user exit function, but looses it's internal matchcodes for spras and maktl.
I've been trying to adjust some parameters in shlp and shlp_tab, but so far with no success.
I need some pointers to either keep both views and have them use my user exit function or have only the MAT1L with matchcodes enabled.

Hi Gustavo,
Maybe you could write your restriction in search help exit(each elementrysearch help could have one exit).
Regards,
Markus

WAD, I can´t search 0COSTCENTER key single values

Dear,
when i search 0COSTCENTER key single values on WAD, view following tex;
Enter a valid value for the property 0COSTCENTER.
diagnosis:
indicated an invalid property value for a property.
activities in the system:
procedure:
Enter a valid value for the property. Support for entries, for example, will provide proposals. If no information is available is because there are no values for the property.
in other case, when i search 0COSTCENTER key single values on BEx Analyzer, don't have problems, the same query.
best regards, and thank you very much.
Osvaldo Arenas
Edited by: Osvaldo_Arenas_T on Dec 1, 2011 4:04 PM

Dear Vineet;
search is effectively by;
CO_AREA/COSTCENTER
in PORTAL only have the problem.
Best regards
Osvaldo Arenas

Searching by a single date or date range.

I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.

Hi MJohnson629,
According to your description, you want to use @StartDate and @Enddate parameters to filter report, right?
In your scenario, you could create two report parameters (@StartDate and @Enddate), then specify a filter as date field between @StartDate and @Enddate in main dataset. Please refer to steps below:
1. Create two parameters, select the Date/Time for Data type. You could specify the date field as available values or not give available values.
2. In main dataset, specify the filter like below:
3. Preview the report, select values for parameters.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

UME user search with multiple search fields (AND / OR search)

Hi,
I'm struggling with a UME user search problem. I have multiple search fields: lastname, firstname, department
Searching in this fields is working with the default IPrincipalSearchFilter.SEARCHMETHOD_AND (default)
<a href="http://help.sap.com/javadocs/NW04/current/um/com/sap/security/api/IPrincipalSearchFilter.html#setSearchMethod(int)">JavaDocs SearchMethod_AND</a>
Now I would like to add an additional search field for searching in telephone, cellphone as well. BUT searching for a phone number with searching for one of the other fields should not be a AND search. Is this possible?
Here is the actual non-working code:
     Vector retVector = new Vector();
     //get Userdata with IUserFactory
     IResourceFactory resourceFactory = ResourceFactory.getInstance();
     IURLGeneratorService urlGen = (IURLGeneratorService)resourceFactory.getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
     IUserFactory userFac = UMFactory.getUserFactory();
     IUserSearchFilter srcFilter = null;
     try
          srcFilter = userFac.getUserSearchFilter();
     } catch (UMException e)
          // TODO Auto-generated catch block
          e.printStackTrace();
     if(lastName.length() > 0)
          srcFilter.setLastName(lastName + "*",ISearchAttribute.LIKE_OPERATOR, false);
     if(firstName.length() > 0)
          srcFilter.setFirstName(firstName + "*",ISearchAttribute.LIKE_OPERATOR, false);
     if(department.length() > 0)
          srcFilter.setDepartment(department + "*", ISearchAttribute.LIKE_OPERATOR, false);
//Here I need help!!!!!!! Please advice!!!
     if(telephone.length() > 0)
          srcFilter.setTelephone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
          srcFilter.setCellPhone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
     //if(mobil.length() > 0)
     //     srcFilter.setCellPhone("*" + mobil, ISearchAttribute.LIKE_OPERATOR, false);
     //Set maxium value for Result and thus limit the static variable SIZE_LIMIT_EXCEEDED
     //This method can only be used, if only one search attribute is specified -> thanks SAP
     if(srcFilter.getElementSize() <= 1)
          srcFilter.setMaxSearchResultSize(300);
     ISearchResult srcResult = null;
     try
          srcResult = userFac.searchUsers(srcFilter);
     } catch (UMException e1)
          // TODO Auto-generated catch block
          e1.printStackTrace();
Thanks for any help...
Stefan

Hello,
I could still need some help. Is there no one who could give me a tip? Could I explain my problem clearly enough or do you need some more information about my problem?
Or is the search topic with searchFilter not a very common used thing?
Is there a possibility to do a search in the received search result? Can anyone explain how this would work?
Any ideas are welcome.
Regards,
Stefan

Is there a way to search for a single problem IP in Incidents?

How do I search for a single IP in Incidents? Or do I search somewhere else?

You can run a query and enter the problem IP as the source or destination IP.
Here's the configuration guide for your reference:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/q_report.html

Couldnt work with multiple key fields in keyword search

Hi,
I have some issue while working keyword search uder free form search in datamanager. in my repository i have two keyfields name(default field) and nation(lookup flat). but while working with keyword search if i pass any value that is comparing with only the values under keyfield name not comparing with other keyfield nation values. i am working with MDM 5.5 sp6. It would be appreciable if any one solve this issue.
Regards
Ravi

Hi Ravi,
If you want to perform Keyword search for Nation field as well without changing it's field type; then plz follow these steps:
1. Set the Keyword property for Nation Field as Normal in Main table.
2. Now go to the lookup table to which Nation field is looking into (say the Lookup table name is Nations).
3. Now set the Keyword property for Nation field as Normal in the lookup table (Nations table) as well.
4. Go back to Main table and now perform Keyword search. This time it will perform the search on both the fields (i.e., Name as well as Nation).
Please let us know, if problem still persists.
Regards,
Varun

How do I use "Search Query" for nontrivial searches?

After a few years in the community, this is my _first_ question to the boards ;-)
In speaking with a colleague today, I learned about an NI forum feature that would be useful for me. When I tried to configure it, I then learned that I didn't know how to use it. When I tried to learn how to use it, I further learned that it wasn't fully documented. So, I'd like some clarification :-)
The feature in question is "Search Query" which will send you an email when a forum search matches your query. What I don't know is:
What are the rules (syntax) for search queries? For example, I would like to search for single words, all the words that I specify, as well as exact phrases. How do I differentiate between multiword queries and exact phrase queries?
Is it possible to have more than one Search Query?
If so, how do you delineate them? Would I use commas, a new line, something else?
I'm asking because the available (and discoverable) documentation doesn't mention what to do when you want more than one Search Query. The help text on the subscription page [1] makes me think that only one query is possible, and says a Search Query:
Sends you mail every time a message matching your query is submitted. Search queries take up to 15 minutes to take effect. Saving a blank query will disable this feature and will stop any mail from being sent.
The other place I tried was the NI Forum FAQ [2], which makes me think that more than one query is possible:
If you add a board, thread, message, or search term to your subscriptions, the system will send you an e-mail every time someone posts to the board, or replies to the message or thread. If you prefer not to receive an e-mail for your subscriptions, you can subscribe to the RSS feed of a board, thread, user, or search term.
The FAQ goes on about what to do with board, thread, and message subscriptions, but doesn't say anything more about search subscriptions.
The last place I looked was on the search results page itself. In the blue header that precedes the results, there's a link on the far left that says "Search Options" with a single option that says "Subscribe to this search's RSS Feed". While I could subscribe and use an RSS reader, I really would prefer email. I suppose if only one Search Query is possible, then this will be my workaround.
As a comment, why does the Search Options menu not also have a "Subscribe to this search" option, which would add another entry in the Search Query box? This is a noticeably different interface than the Thread Options menu.
[1] Subscriptions & Bookmarks
http://forums.ni.com/ni/user_subscriptions
[2] Frequently Asked Questions
http://forums.ni.com/ni/help_faq
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
Solved!
Go to Solution.

Hi Joe,
Thanks for all of the questions and congrats on posting your first question!
Unfortunately I think all of your questions come from the valid assumption that the search query functionality is more robust than it actually is. The search query functionality really only serves a single purpose and that is to email you when your phrase has been posted to the forums. For me, I use it to email me when my name is mentioned in the forums. It serves this purpose well since I have it set up to work off just a single search term. However I find that multiple word phrases are combined with an OR which is not as useful. The search query does not adhere to any common search syntax that you would expect (I believe we are the only community that uses this feature so it has not been improved upon).
The best way to set up both multiple word queries and multiple different queries is to use the RSS feed as you mentioned. This way you can tailor your search very specifically using different advanced search options and subscribe to them all in one feed reader without constantly getting emails. The search query emails do not adhere to the digest subscription settings. I find that the RSS feeds work very well for searches and I am fond of using them, but I do use an RSS Reader for many things so it is not out of my normal workflow.
Thank you for reading the Forum FAQ. I've done some work to improve it but I think it has a long way to go and it's good to know that people read it
Regards,
Laura
Web Support & Operations
National Instruments

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Multiple Lines in a Single ALV Grid Cell

Is there any way to Display Multiple Lines in a Single ALV Grid Cell.
This can be accomplished by Sorting the First 3 fields and Make it Looks like below displayed format.
But My problem is while downloading also it should be Displayed in the same format.
All inputs are highly appreciated.

there was a post similar to this some days back... search it..
any ways...
what u can do is...
arrange ur final internal table so that it will look like same line...
like...lets say ur internal table is :
A1 B1 C1 D1 123
A1 B1 C2 D2 123
A1 B2 C1 D1 123
A1 B2 C2 D2 123
and u can rearrange ur table to be like
A1 B1 C1 D1 123
C2 D2 123
A1 B2 C1 D1 123
C2 D2 123
what i mean to say is dont pass the fields if they are same in the previous line... try it out..
and then pass it two ur ALV.
it will look like they are in one line
Edited by: soumya prakash mishra on Jun 17, 2009 1:31 PM

How do I scan multiple documents to a single pdf from the ADF on my MX922?

How do I scan multiple documents to a single pdf from the ADF on my MX922?
Solved!
Go to Solution.

Hi Riceburner1,
Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer. To do this, please follow these steps:
1. Place the documents in the ADF or on the platen glass of the printer.
2. Start the IJ Scan Utility.
For Windows 8.1:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
For Windows XP:
1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file. Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name. If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

With multiple events in a single event case, how to associate value with the correct object?

I am playing with the template where an event structure takes note of user inputs and a main state machine is then used to respond to these inputs. When I only monitor one control I use the 'NewVal' output to read out the changed value. But when I monitor multiple objects with a single case I also have to associate the readout with the correct owner. After some tinkering I was able to extract the label property and use a case to assign them. Are there better ways of doing this? For example maybe there is a way to connect the label text directly to the 'bundle by name'?
Also this should be easy to accomplish by simply creating local variables of the objects and read from them, but I got the impression that the use of global and local variables is now strongly discouraged?
Thanks for any suggestions!
Attachments:
Untitled.png ‏39 KB

Well, I don't really like these theroretical discussions. Can you attach a simplified version of some of your code?
There are many other ways to identify the particular control. You could for example search an array of references for the value of the "ctlref" event data node. This would make the code much more robust (your code will fail for example if you (or some other programmer updating your code in a few years!) notices a mispelling and edits the label without also changing the case structure cases).
LabVIEW Champion . Do more with less code and in less time .

Registry LDAP - Multiple search bases x single search base

Similar Messages

Maybe you are looking for