Related to Inspection Characteristic load issue

Hi All,
I am trying to load inspection charatceristics - please see my requirement below
Can we use the standard SAP program for Equipment Task lists to load the Inspection Characteristics associated with the Operations?
Transaction (IA01)
The program works fine for Header and Operations (One to Many, PLKO to PLPO) but does not have a separate structure for PLMK (Inspection Characteristics) but has a structure IBIPBDCD to use.
What we're trying to achieve basically is One Header, Many Operations each having many Inspection Characteristics
Also,
In the current state the program can add one Inspection Characteristic to the First operation, is it possible to add "BDC Commands" to the file in such a way to
1. "Position on particular" operation (i.e. Position Cursor and select line on screen SAPLCPDI 3400 where PLPOD-VORNR = 'xxxx')?
2. Go back to the operations screen (i.e. SAPLCPDI 3400) at the end of each Inspection Characteristic entry in order to be able to position on either the same operation to add an Inspection characteristic or to position on a different operation (not necessarily the next one)
Could you please help me with this issue?

It is possible, Get help from ABAP.
Thanks & Rgards
Rajendran

Similar Messages

Related to Inspection Characteristics load issue

Hi All,
I am trying to load inspection charatceristics - please see my requirement below
Can we use the standard SAP program for Equipment Task lists to load the Inspection Characteristics associated with the Operations?
Transaction (IA01)
The program works fine for Header and Operations (One to Many, PLKO to PLPO) but does not have a separate structure for PLMK (Inspection Characteristics) but has a structure IBIPBDCD to use.
What we're trying to achieve basically is One Header, Many Operations each having many Inspection Characteristics
Also,
In the current state the program can add one Inspection Characteristic to the First operation, is it possible to add "BDC Commands" to the file in such a way to
1. "Position on particular" operation (i.e. Position Cursor and select line on screen SAPLCPDI 3400 where PLPOD-VORNR = 'xxxx')?
2. Go back to the operations screen (i.e. SAPLCPDI 3400) at the end of each Inspection Characteristic entry in order to be able to position on either the same operation to add an Inspection characteristic or to position on a different operation (not necessarily the next one)
Could you please help me with this issue?

It is possible, Get help from ABAP.
Thanks & Rgards
Rajendran

Uregnt pls!! Inspection Plan -Load error

Hi,
I am trying to load Inspection plans using Direct input method of LSMW.
I am getting an error saying
<b> The control chart in the sampling method does not match the insp. char.</b>
When I did a F1 following is message.
where to look in this config?
     Message no. QD240
Diagnosis
     The control chart type 525 is entered in the sampling procedure used.
     This control chart type does not match the inspection characteristic.
     Examples:
     o   It is assumed that measured values are recorded for the control
         chart.
     o   The control chart is only allowed with a fixed sample size.
     o   The control chart is only allowed with partial samples.
Any ideas?
regards
Praveen
Message was edited by:
        PRAVEEN s

Hi,
May be due to
if you have inspection point defined in your task list then free inspection point indicator ON in Sampling Procedure.
I am not 100% sure
aRs

RE: Behaviour of an inspection characteristic.

Hi All,
Please help me in this issue.
The requirement is the behaviour of the inspection characteristic to be different in different material lots. Take for instance:
X- Inspection characteristic.
Now this inspection characteristic is being used in two different material lots say: TO2707 & TO2909. Now the requirement is that these inspections characteristic 'X' to behave in different manner to both of the material lots. Now as this inspection characteristic is being referenced in the inspection plan for the two materials it is not possible to behave like this.
So,
This is my client requirment which I think is not really possible. what do you think.
Regards,
vivek sharma

Hi Vivek,
Inspection points are the feature that guides the system "What to Do?" I mean hoe the result recording to be done with,
Either against Physical Sample or Freely defined inspection points or the RR\inspection is being done based on some event or Time etc.
Pls read the "F1" help for that field. that will make your concept more clear.
But the easier way to get-read off it is,
Check what is the value you have feed in as inspection point at Inspection plan header level, it must be 100 - reely-defined inspection point, That is why it is asking for inspection points.
So just provide some text or number (Logical Off course), there in Result Recording, that represents the RR or Inspection is done on what basis.
E.g. Inprocess-01, Recurring-May'08, etc.
Then you will able to see the Characteristic, and even then after you can't see it check the Indicator "Record Measured Values"
Regards,
Shyamal

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Report loading Issue

Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.

I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem?

Data Load Issue "Request is in obsolete version of DataSource"

Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
Samit

Hi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu.

Activating Subscript For Inspection characteristic Long Text in T-code QE11

Hello All
I have maintained the inspection characteristic long text in QP01 as " H2O" where 2 is in Subscript.
No when I see the inspection characteristic long text in T-Code (QE11, QE12 & QE13) it appear as (H2O) & here "2" is not shown in the subscript.
So please tell how can we activate subscript for T-Codes (QE11,QE12 & QE13) so that it is displayed correctly.
Regards
Rahul Bhardwaj

Hello All
can anyone please help me out on this. I am there must be a solution for the same.

Index.php loading issue

I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
Crissymarie

Ken might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

TileList data load issue

I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

QM - Inspection Characteristic Upload

Hi All,
   I am uploading Inspection Characteristic data through
'BAPI_INSPECTIONPLAN_CREATE' but facing error message ' In the function module interface, you can specify only fields of a specific type and length under "MATERIALTASKALLOCATION".
fields of a specific type and length under Although the currently specified field
" " is the correct type, its length is incorrect.
Please suggest me.
With regards,
Pravin

For distribution of QM data SAP uses 'normally' ALE. Have a look at
http://help.sap.com/saphelp_erp2004/helpdata/en/aa/c62537b1d2360ae10000009b38f889/frameset.htm
There are topics for inspection methods and inspection characteristics - looks like best solution to synchronize several systems (manual / BAPI creation in DEV-system, testing/checking, sending to all other systems).

BI Load issue in the transformation/DTP after SP 17

Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
Cesar

Hi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards,

BW sales load issue

I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.

Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Related to Inspection Characteristic load issue

Similar Messages

Maybe you are looking for