Relation between campagin and process type

Hi All,
Please let me know the relation between Campaign Id and Process Type. ie. based on a campaign id how to find the transaction process type?
Regards,
Vinny

Hi Vinny,
As I know, Campaign is different from other document like Sales Order or
Complaint. For Campaign there is special setting where there is no need
to define transaction type. Even, there is no number range defined for
this Campaign. There is only Campaign number masking.
Hope this helps,
Gun.

Similar Messages

  • Relation between CorrelationSet and process's operations.

    Hi,
    When playing with C:\orabpel\samples\tutorials\109.CorrelationSets
    I end up with a big question:
    If I create a proces that works with other deployed process, like the Seller. How could I know which method (operation) or that process requires correlation set?
    Because I think, I have to know that information inorder to create my process correctly. However, I couldn't find such information in the WSDL of the deployed process.
    Thanks alot.

    Same question here.....
    For the Buyer/Seller Sample in C:\orabpel\samples\tutorials\109.CorrelationSets, I found that the sample still works after I deleted the Correlation Set. So, what is the use of Correlation Set in this sample?

  • Event and Process Types - Urgent

    Hi All,
    I am little confused between Events and Process Types in a PC. How an event can be used in a PC ?
    I know that SM62- To create event, SM64 – Execute Event. But how its used in PC.
    Thanks in adv for your reply.

    Events can be used to start the process chain based on the event raise. In order to use the events
    1. Create an event using SM62
    2. Go to your process chain start variant and select the start type as After event and give the event name which you created and then activate and schedule the process chain
    3.Now go back to sm64 and trigger the event that should actually start the Process chain. This can be monitored using the Process chain log.
    Regards,
    Jagadeesh.

  • What are the Relations between Journalizing and IKM?

    What is the best method to use in the following scenario:
    I have about 20 source tables with large amount of data.
    I need to create interfaces that join the source tables into target tables.
    The source tables are inserted every few secondes with about hundreds to thousands rows.
    There can be a gap of few seconds between the insert of different tables that sould be joined.
    The source and target tables are on the same Oracle instance and schema.
    I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
    how can i use it in my scenario?
    In general What are the relations between 'Journalizing' and 'IKM'?
    Should i use both of them? Or maybe it is better to deelte and insert to the target tables?
    I want to understand what is the role of 'Journalizing CDC'?
    Can 'IKM - Incremental Update' work without 'Journalizing'?
    Does 'Journalizing' need to have PK on the tables?
    What should i do if i can't put PK (there can be multiple identical rows)?
    Thanks in advance Yael

    Hi Yael,
    I will try and answer as many of your points as I can in one post :-)
    Journalizing is way of tracking only changed data in your source system, if your source tables had a date_modified you could always use this as a filter when scanning for changes rather than CDC, Log based CDC (Asynchronous in ODI, Logminer/Streams or Goldengate for example) removes the overhead of of placing a trigger on the source table to track changes but be aware that it doesnt fully remove the need to scan the source tables, in answer to you question about Primary keys, Oracle CDC with ODI will create an unconditional log group on the columns that you have defined in ODI as your PK, the PK columns are tracked by the database and presented in a Journal table (J$<source_table_name>) this Journal table is joined back to source table via a journalizing view (JV$<source_table_name>) to get the rest of the row (ie none PK columns) - So be aware that when ODI comes around to get all data in the Journalizing view (ie Inserts, Updates and Deletes) the source database performs a join back to the source table. You can negate this by specifying ALL source table columns in your PK in ODI - This forces all columns into the unconditional log group, the journal table etc. - You will need to tweak the JKM to then change the syntax sent to the database when starting the journal - I have done this in the past, using a flexfield in the datastore to toggle 'Full Column' / 'Primary Key Cols' to go into the JKM set up (there are a few Ebusiness suite tables with no primary key so we had to do this) - The only problem with this approach is that with no PK , you need to make sure you only get the 'last' update and in the right order to apply to your target tables, without so , you might process the update before the insert for example, and be out of sync.
    So JKM's provide a mechanism for 'Change data only' to be provided to ODI, if you want to handle deletes in your source table CDC is usefull (otherwise you dont capture the delete with a normal LKM / IKM set up)
    IKM Incremental update can be used with or without JKM's, its for integrating data into your target table, typically it will do a NOT EXISTS or a Minus when loading the integration table (I$<target_table_name>) to ensure you only get 'Changed' rows on the load into the target.
    user604062 wrote:
    I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
    how can i use it in my scenario?Hopefully I have explained it above, its the type of thing you really need to play around with, and throroughly review the operator logs to see what is actually going on (I think this is a very good guide to setting it up : http://soainfrastructure.blogspot.ie/2009/02/setting-up-oracle-data-integrator-odi.html)
    In general What are the relations between 'Journalizing' and 'IKM'?JKM simply presents (only) changed data to ODI, it removes the need for you to decide 'how' to get the updates and removes the need for costly scans on the source table (full source to target table comparisons, scanning for updates based on last update date etc)
    Should i use both of them? Or maybe it is better to deelte and insert to the target tables?Delete and insert into target is fine , but ask yourself how do you identify which rows to process, inserts and updates are generally OK , to spot a delete you need to compare the table in full, target table minus source table = deleted rows , do you want to copy the whole source table every time to perform this ? Are they in the same database ?
    I want to understand what is the role of 'Journalizing CDC'?Its the ODI mechanism for configuring, starting, stopping the change data capture process in the source systems , there are different KM's for seperate technologies and a few to choose for Oracle (Triggers (Synchronous), Streams / Logminer (Asynchronous), Goldengate etc)
    Can 'IKM - Incremental Update' work without 'Journalizing'?Yes of course, Without CDC your process would look something like :
    Source target ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
    With CDC your process looks like :
    Source Journal (J$ table with JV$ view) ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
    as you can see its the same process after the source table (there is an option in the interface to enable the J$ source , the IKM step changes with CDC as you can use 'Synchronise Journal Deletes'
    Does 'Journalizing' need to have PK on the tables?Yes - at least a logical PK in the datastore, see my reply at the top for reasons why (Log Groups, joining back the J$ table to the source table etc)
    What should i do if i can't put PK (there can be multiple identical rows)? Either talk to the source system people about adding one, or be prepared to change the JKM (and maybe LKM, IKM's) , you can try putting all columns in the PK in ODI. Ask yourself this , if you have 10 identical rows in your source and target tables, and one row gets updated - how can you identify which row in the target table to update ?
    >
    Thanks in advance YaelA lot to take in, as I advised I would reccomend you get a little test area set up and also read the Oracle database documentation on CDC as it covers a lot of the theory that ODI is simply implementing.
    Hope this helps!
    Alastair

  • Relation between GR and Theoritical qty

    Hi,
    I have an issue with a report program which fetches the PO and material data from ME23n.The program should display PO, material head, material quantity, GR qty, vendor, theoretical qty, Actual qty.
    Here for one of the POs, the GR qty is 1CU but theoretical qty is getting as 8640.
    Can anyone explain what is the relation between GR and theoretical qty ? and how to solve this issue?
    How to calculate theoretical qty ?
    Thanks.

    Hi
    By GR you mean Goods Receipt.There is no Idoc for this process.SRM uses XML format for Confirmation which is equivalent to Goods confirmation process in ERP system.
    GR Idoc - You can try WE09. Give the message type and all the details that you have. you will get the Idoc number.
    If you are in position to tell what is your exact requirement with table in SRM system,i should be in position to help.
    There is a transaction called BBP_PD using which you can get the required table.
    Just go to this transaction in SRM EASY Access Menu.
    Select Object Type as (Take F4 Help here)
    for confirmation ,object type = BUS2203.
    You will get an interactive list and you can browse the list and in the last node ,you will get some table names which may be helpful.
    If you have the PO# you can use the FM BBP_PD_CONF_GETLIST with the parameter I_FOR_PO_ID, this will return a E_PDLIST table with the GR numbers related to the PO that you used as input.
    Useful related pointers ->
    Goods Receipt and Invoice Receipt
    Re: interface required to post invoice in EBP system in SRM4.0
    Re: BAPI or FM to create Invoice in SRM , without reference to PO ?
    Do let me know.
    Regards
    - Atul

  • Relation between sapstartsrv and saphostexec

    I am trying to implement note 1826767 which says:
    Resolution
    Configure https for the sapstartsrv process. The necessary steps are described in the chapter 'Configuring HTTPS for the SAP Host Agent' in the SAP HANA Automated update guide.
    My question is what is the relation between sapstartsrv and saphostexec here, i.e. why configuring HTTPS  saphostexec is equivalent to configuring HTTPS for sapstartsrv?   sapstartsrv and saphostexec are 2 different executables.
    Thanks!

    Hi Christina,
    In newer versions of SAP, SAPHostExec
    saphostexec is an executable that runs under root (UNIX) or the Local System Account (Microsoft Windows). It controls all of the functions for which a special user of this type are required, such as the operating system collector saposcol and sapacosprep. It is connected to sapstartsrv in host mode using a local socket, which ensures quick and secure communication and is also started during the startup of the host.
    Refer SAP help Monitoring Hosts with SAPHostControl and saphostexec - Infrastructure of the SAP NetWeaver Management Agents - SAP Libra…
    When you check the status of saphostexec using the command
    /usr/sap/hostctrl/exe/saphostexec -status
    You will see below processes
    saphostexec running (pid = 4729)
    sapstartsrv running (pid = 4732)
    saposcol running (pid = 0)
    I guess the relation is clear for you.
    Hope this helps.
    Regards,
    Deepak Kori

  • Table relations between vbrk and bkpf for  Accounting Document Number

    hello,
    i am using 4 tables to get data into my programs.
    vbrk,vbrp konv and bkpf.
    i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
    can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
    regards,
    soniya s.

    hi,
    chekc this. its working for me.
    data : WA_AWKEY LIKE BKPF-AWKEY.
    data :  WA_BELNR LIKE BKPF-BELNR.
    data : LENGTH TYPE I.
    *BREAK MTABAP.
    LENGTH = STRLEN( IT_VBRK-VBELN ).
    if  LENGTH = '10' .
    MOVE it_vbrk-VBELN TO WA_AWKEY.
    SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
      WHERE AWKEY = WA_AWKEY
      AND AWTYP = 'VBRK'
      and blart = 'RV'.
    it_final-acc_doc = WA_BELNR.
      CLEAR WA_BELNR .
      CLEAR WA_AWKEY .
    else.
    CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
    SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
      WHERE AWKEY = WA_AWKEY
      AND AWTYP = 'VBRK'
      and blart = 'RV'.
    it_final-acc_doc = WA_BELNR .
      CLEAR WA_BELNR .
      CLEAR WA_AWKEY.
    endif.

  • How to make relation between  gl_je_lines  and wip_transaction_accounts

    I try to write script to make relation between GL and WIP, wip_transaction_accounts and mtl_material_transactions
    1.
    SELECT
    (SELECT meaning
    FROM mfg_lookups
    WHERE lookup_type = 'WIP_TRANSACTION_TYPE'
    AND lookup_code =
    (SELECT TRANSACTION_TYPE
    FROM wip_transactions
    WHERE transaction_id = wta.transaction_id
    ) "Transaction Type" ,
    gjb.NAME "Journal Batch Name" ,
    gjh.NAME "Journal Name" ,
    gjh.je_source "JE Source" ,
    gjh.je_category "JE Category" ,
    glp.period_num "GL Month" ,
    glp.period_year "GL Year" ,
    gjh.default_effective_date "GL Date" ,
    NVL(gje.accounted_dr,0) -NVL( gje.accounted_cr,0) "GL Line Amount" ,
    gje.description "GL Line Description" ,
    (SELECT organization_code
    FROM mtl_parameters
    WHERE organization_id = wta.organization_id
    ) "ORG Name" ,
    NULL "Vendor/Customer Name" ,
    NULL "SO/PO Number" ,
    NULL "Reference Number" ,
    NULL "AP/AR Invoice Number" ,
    NULL "Doc Sequence Value" ,
    NULL "Invoice Type Lookup Code" ,
    NULL "Check Number" ,
    NULL "Line Type" ,
    NULL "Category" ,
    NVL (wta.base_transaction_value, 0) "Transaction Amt" ,
    NULL "AR/PO Receipt Number" ,
    NULL "Applied Invoice Number" ,
    (SELECT a.segment1
    FROM mtl_system_items_b a ,
    wip_discrete_jobs b
    WHERE a.inventory_item_id = b.primary_item_id
    AND a.organization_id = b.organization_id
    AND b.wip_entity_id = wta.wip_entity_id
    AND b.organization_id = wta.organization_id
    ) "Item Name" ,
    gcc.segment1 "Company" ,
    gcc.segment2 "Department" ,
    gcc.segment3 "Account" ,
    (SELECT description
    FROM fnd_flex_values_vl fnd
    WHERE flex_value_set_id = 1009707
    AND TO_CHAR (fnd.flex_value) = gcc.segment3
    ) "Account Description" ,
    gcc.segment4 "Intercompany" ,
    NULL "JE Category Description" ,
    NULL "AP Invoice Line Description"
    TRUNC (wta.transaction_date) "JE Creation/Inv Trans Date" ,
    NULL "JE Created By" ,
    NULL "Reversal Flag" ,
    NULL "Reason Code" ,
    NULL "Subinventory Name" ,
    wta.primary_quantity "Quantity" ,
    NVL (wta.base_transaction_value, 0) "Value" ,
    gje.context ,
    gje.attribute1 ,
    gje.attribute2 ,
    gje.attribute3 ,
    gje.attribute4 ,
    gje.attribute5 ,
    DECODE(gjh.status,'P','Posted','U','Unposted','Error') "Post Status"
    FROM gl_je_lines gje ,
    gl_je_headers gjh ,
    gl_je_batches gjb ,
    wip_transaction_accounts wta ,
    gl_code_combinations gcc ,
    gl_periods glp
    WHERE 1 =1
    AND gje.je_header_id = gjh.je_header_id
    AND gjh.je_batch_id = gjb.je_batch_id
    AND UPPER (gjh.je_source) = 'INVENTORY'
    AND gcc.code_combination_id = gje.code_combination_id
    AND wta.reference_account = gje.code_combination_id
    AND TRUNC(wta.transaction_date) BETWEEN glp.START_DATE AND glp.END_DATE
    AND gje.reference_1 = wta.gl_batch_id
    AND gje.gl_sl_link_table = 'WTA'
    AND glp.period_name = gjh.period_name
    AND glp.period_set_name = 'OVT_US_CAL'
    ==
    2.
    SELECT mtt.transaction_type_name "Transaction Type" ,to_char(mmt.transaction_date,'mm/dd/yyyy hh:mi:ss') as teas, mta.transaction_id,mta.organization_id, mmt.organization_id,
    gjb.NAME "Journal Batch Name" ,
    gjh.NAME "Journal Name" ,
    gjh.je_source "JE Source" ,
    gjh.je_category "JE Category" ,
    glp.period_num "GL Month" ,
    glp.period_year "GL Year" ,
    gjh.default_effective_date "GL Date" ,
    NVL(gje.accounted_dr,0) - NVL(gje.accounted_cr,0) "GL Line Amount" ,
    gje.description "GL Line Description" ,
    (SELECT organization_code
    FROM mtl_parameters
    WHERE organization_id = mta.organization_id
    ) "ORG Name" ,
    NULL "Vendor/Customer Name" ,
    NULL "SO/PO Number" ,
    mmt.TRANSACTION_REFERENCE "Reference Number" ,
    NULL "AP/AR Invoice Number" ,
    NULL "Doc Sequence Value" ,
    NULL "Invoice Type Lookup Code" ,
    NULL "Check Number" ,
    NULL "Line Type" ,
    NULL "Category" ,
    NVL (mta.base_transaction_value, 0) "Transaction Amt" ,
    NULL "AR/PO Receipt Number" ,
    NULL "Applied Invoice Number" ,
    (SELECT segment1
    FROM mtl_system_items_b
    WHERE inventory_item_id = mmt.inventory_item_id
    AND organization_id = mmt.organization_id
    ) "Item Name" ,
    gcc.segment1 "Company" ,
    gcc.segment2 "Department" ,
    gcc.segment3 "Account" ,
    (SELECT description
    FROM fnd_flex_values_vl fnd
    WHERE flex_value_set_id = 1009707
    AND TO_CHAR (fnd.flex_value) = gcc.segment3
    ) "Account Description" ,
    gcc.segment4 "Intercompany" ,
    NULL "JE Category Description" ,
    NULL "AP Invoice Line Description"
    TRUNC (mta.transaction_date) "JE Creation/Inv Trans Date" ,
    NULL "JE Created By" ,
    NULL "Reversal Flag" ,
    (SELECT MGD.SEGMENT1
    FROM MTL_GENERIC_DISPOSITIONS MGD,
    MTL_MATERIAL_TRANSACTIONS MMTT
    WHERE MGD.DISPOSITION_ID = MMTT.TRANSACTION_SOURCE_ID
    AND MMTT.TRANSACTION_SOURCE_TYPE_ID = 6
    AND MGD.ORGANIZATION_ID = MMTT.ORGANIZATION_ID
    AND MMTT.TRANSACTION_ID = MMT.TRANSACTION_ID
    ) "Reason Code" ,
    mmt.SUBINVENTORY_CODE "Subinventory Name" ,
    mta.primary_quantity "Quantity" ,
    NVL (mta.base_transaction_value, 0) "Value" ,
    gje.context ,
    gje.attribute1 ,
    gje.attribute2 ,
    gje.attribute3 ,
    gje.attribute4 ,
    gje.attribute5 ,
    DECODE(gjh.status,'P','Posted','U','Unposted','Error') "Post Status" -
    FROM gl_je_lines gje ,
    gl_je_headers gjh ,
    gl_je_batches gjb ,
    mtl_transaction_accounts mta ,
    mtl_material_transactions mmt ,
    mtl_transaction_types mtt ,
    gl_code_combinations gcc ,
    gl_periods glp
    WHERE 1 =1
    AND mta.transaction_id = mmt.transaction_id
    AND gje.je_header_id = gjh.je_header_id
    AND gjh.je_batch_id = gjb.je_batch_id
    AND UPPER (gjh.je_source) = 'INVENTORY'
    AND gcc.code_combination_id = gje.code_combination_id
    AND mta.reference_account = gje.code_combination_id
    AND TRUNC(mta.transaction_date) BETWEEN glp.START_DATE AND glp.END_DATE
    and mta.request_id=mmt.request_id
    and mta.inventory_item_id=mmt.inventory_item_id
    AND gje.reference_1 = mta.gl_batch_id
    AND gje.gl_sl_link_table = 'MTA'
    AND mtt.transaction_type_id = mmt.transaction_type_id
    AND glp.period_name = gjh.period_name
    AND glp.period_set_name = 'OVT_US_CAL'
    When gl_je_lines have multiple line this script on the same transaction_id it will get wrong information. By setup all wip_transaction_accounts.GL_SL_Lind_id and mtl_transaction_accounts.GL_SL_Lind_id is null
    Anyone can help?

    Hello.
    How are you reaching the inconsistencies ? Are you comparing report's results?
    Octavio

  • What is the relation between bw and netweaver

    Hi all
    what is the relation between bw and netweaver? any one give answer for this

    Hi
    SAP NetWeaver
    The SAP NetWeaver technology platform is the open integration and
    application platform that reduces total cost of ownership (TCO) across the
    entire IT landscape.
    SAP NetWeaver integrates and aligns people, information, and business
    processes across technologies and organizations
    And BW is a part of Composite Application framework for Information Integration
    This framework also contains Other Components such
    o     Enterprise Portals (EP)
    o     Exchange Infrastructure (XI)
    o     Master data management (MDM)
    o     Solution manager
    o     Web Application server (WAS)
    o     xApps
    Hope this solves ur question.as if any further doubts
    Sonal...

  • What is the relation between UTXJ and JMOD, how JMOD determine in order

    Hi All,
    What is the relation between UTXJ and JMOD! 
    How JMOD determine in order! ( For TAXINJ).
    Please help me
    Regards
    raj

    Dear Raj
    Both are not related in anyway.  UTXJ is for sales tax and JMOD is for excise condition.  For UTXJ, you need to create a tax code in FTXP and assign it in VK11 / UTXJ, whereas, JMOD is an excise condition type for which, you need to maintain the relevant datas in J1ID.
    Coming to your question, how JMOD is determined in sale order, it is based on delivering plant.  This delivering plant, as already said above, you will have to maintain in J1ID with the indicator "1" under declared tab in Material Chapter ID combination.
    thanks
    G. Lakshmipathi

  • Relation between URL and content in JSF navigation

    Hello,
    I've tried lots of JSF examples and there always occoured a strange kind of navigation to me:
    The URL you see in the browser's address bar has nothing to do with the actually displayed JSP. Instead of that, the URL is always pointing to the previously called JSP - where the call to the current JSP comes from.
    I know where this comes from:
    If the form tags don't define an action, they are pointing to the current page itself.
    And the actually called navigation case is chosen by a (hidden) post parameter.
    So the JSF controller servlet doesn't actually care, which URL is called - it just regards the mentioned parameter.
    This kind of navigation seems quite confusing, especcially since JSF claims to make navigation clearer.
    One of the basic demands of the web applications we are developing is, to have a clear relation between URL and page content.
    E.g. it must be possible to index the pages with search engines. Or to simply bookmark distinct pages in the browsers favourites.
    Another problem about this navigation concept is, that it always works with forms and with post method (you can't choose get method), even if you just have simple links - e.g. detail view of a single item after selecting it from a list of items. That way it's not possible to ever use the back button of your browser.
    I'm new to JSF, so my question:
    Is this the (one-and-only) navigation concept of JSF, or are there alternative concepts as well?
    I would be surprised, since the mentioned demands are basic web standard - although I didn't find any alternatives so far.
    Thanks,
    Chily

    Thanks for the answer!
    I'm not sure, if using a redirect on every single call is very achieveable and in the purpose of the JSF design.
    E.g. it is generating a lot of traffic overhead.
    (Identifying the navigation case by the page name instead of a hidden parameter would help a lot.)
    Or the history of the browser doesn't work with it, so you can't identify visited links.
    But anyways, there are also internal problems with it in most cases: I've inserted the <redirect/> tag in the navigation cases of a few examples. This just causes a call of the <to-view-id> page, without any parameters. So I probably have to add some non-standard-processing around the call to make it work:
    If e.g. I have the standard case of a list of items (let's say in a dataTable), which are identified by an id. And each item uses a commandLink to call it's detail view.
    * How do I get the identifier (id) as a parameter into the redirect URL?
    * And how do I access this parameter in the destination form bean to choose the item to be displayed? (see also http://forum.java.sun.com/thread.jspa?threadID=607505)
    Thanks for help,
    Chily

  • Relation between Principals and role in JAAS

    hi
    i have a problem to understand the relation between Principals and roles
    is a principal a role?
    if for example, a user A have two roles:role1 and role2
    what we should do:a principal for each role or one principal that contain the two roles
    please help me?

    thanks ejp for your response
    another question if u don't mind:
    suppose that a user A have two principal :p1 and p2
    what should i do: two classes that implements Principal, Serializable for each type of principal or simply write one class that implements Principal, Serializable and assign the type of principal to the constructor(MyPrincipal("p1") and MyPrincipal("p2"))

  • Relation between PLKO and PLPO

    Hi Friends ,
    What is the relation between PLKO and PLPO table  or MAPL and PLPO ? In PLPO table I found operation activity(VORNR) is repeating  for same group (PLNNR) , so how can we find out which is the valid one ?
    Thanks in Advance ,
    Joby

    Hi,
    goto transaction c203 give Recipe Group (ur plnnr) and press enter.......
    der in operations tab ull hav all the operations(vornr) for that recipe grp(plnnr) ok..............choose the one u want....now find the other details
    Task List Type  (plnty)
    node                (plnkn)
    counter            (zaehl).     and pass it to plpo to get unique record..................
    Cheers,
    jose.

  • Relation between PLM and QM modules

    What is the relation between PLM and QM modules?
    These two are different modules or QM is one of the module in PLM and there is no module as PLM and its just general term?
    Why QM is many times called with PLM - QM?

    Hi Sandip,
    mySAP PLM has many key features like:
    1.Collabarative Engineering and Design.
    2. Custom Product Development
    3. Knowledge Management
    4. Project Management
    5.Colloborative Maintenance management
    6. QUALITY MANAGEMENT
    <u>Begin quality planning during the product design phase, and create a foundation for quality inspection processes and in-process control during production
    and Allow employees to play a central role in quality management
    and it also Satisfy criteria for ISO 9000 and Good Manufacturing Practice (GMP)</u>
    Tracking the Product through out its life from a quality perspective is PLM-QM
    The Functionality that Spans the Entire Product & Asset Life Cycle are:
    1. Life Cycle Data Management (MM, BOM, DMS, CAD Interface, Classification System)
    2. Program & Project Management(Project System, Collaboration Folders, Collaboration Projects, XRPM, xAPPS)
    3.QUALITY MANAGEMENT
    4. Asset Life-Cycle Managment
    5. Environment, Health and Safety.
    Regards
    Rehman
    Reward Your Suitable Points if Helpful

  • Relation between tms and BBDD connections

    What is relation between TMS and BBDD connections? I want to know when a TMS (XA or
    not XA) boots how many connections are needed? When a connection are destroyed inside
    a service?
    Thanks in advance.
    Juan.

    Sorry - I'm not familiar with that term (BBDD).
    Any XA process calls the xa_open function of its resource manager. This
    includes TMSs, servers built with -r, and even clients built with -r.
    Clients and servers that participate in transactions call xa_start and
    xa_end.
    Whatever happens next is up to the RM. Any connections made as a result
    of these calls are done by the RM, not by Tuxedo.
         Scott Orshan
    Juan Martinez wrote:
    >
    What is relation between TMS and BBDD connections? I want to know when a TMS (XA or
    not XA) boots how many connections are needed? When a connection are destroyed inside
    a service?
    Thanks in advance.
    Juan.

Maybe you are looking for