Relative humidity vs time VI

Hello everyone I am having some trouble trying to make a VI for relative humidity. I've already correctly scaled the unit within NI MAX and its displaying the correct output in RH% already as opposed to mA.
I ultimately want to have the VI show/do:
Current RH% gauge (working)
Current time as X-axis but is scrollable (not sure if scrolling works)
Current RH as Y-axis (not working)
Export information to excel document with column for time and rh% (not even coded...)
I was able to change the "absolute time" to show correctly as opposed to the default which was some strange 1904 year. I got this to populate on the X-axis for the wave form chart but I cannot get the Y axis to work for humidity. I'd also like to be able to scroll right to left to see previous time values for RH on that chart but I haven't really gotten that far either.
Lastly I'd like to export this data to an excel file with headers/columns for time and RH. Since it doesn't necessarily have to be real-time, I'd also like to make the "data intervals" to be every 10 minutes if possible.
I've never really used labVIEW before so I'm a bit confused as to what to do and I would greatly appreciate any help. Please forgive the very noobish VI setup....The VI and screenshot of blockdiagram is attached
THANK YOU!
Attachments:
Vaisala HMD40Y.vi ‏31 KB
Block Diagram.png ‏29 KB

Hello,
So I've changed the loops and added a user-editable timer to determine how often the VI adds to the chart. I believe it checks out now, so please let me know.
I believe the date/time is being run only once now, however the problem I am facing now is that if I set the interval to anything other than 1 second, the X-axis display get's out of sync. IE: If I select 0, it runs at hyper speed and the X-axis blazes by 24 hours in a short period. The reverse is true if I increase the time.
@Jeff·Þ·Bohrer
Is this the excel function you were talking about? (above the stop button)
Thanks again
Attachments:
Block Diagram Screenshot.png ‏28 KB

Similar Messages

Relation between RFC time and Roll wait time

Hello
What is the relation between RFC time and Roll wait time?
In a diagram from E2E100 training I took recently the relationship is made out to be:
RFC+CPIC = some processing time + Roll wait time
Something like this
Processing----
Roll wait-------
Roll in
RFC+CPIC----
In the diagram I saw it shows that roll out occurs during processing.
Assumming that the user context rolls out and then rolls in again, wouldn't "Wait" time occur when the request comes back and the dispatcher has to assign the request to a work process?
Is this wait time calculated as "Wait" time or is it calculated as "Roll wait" time?
I was forced to think about this because of a STAD record I have with high Roll wait time, but with low RFC time as well as zero GUI time. If "Wait" time when the request comes back from RFC is included in "Roll wait" then it might explain what i'm seeing.
Kind regards,
Peter

Hello Santosh,
Thank you for your reply.
I would like to know how time spend in the dispatcher by a request coming back from an RFC is calculated.
When the RFC is made the user context is rolled out of the work process so the work process becomes free. When the RFC comes back it has to be assigned to a new work process. This means that a bit of time would need to be spent in the dispatcher. Would this time be measured as "wait" time or is it part of "Roll wait time?
From the definition you gave of "Roll wait time", "it is the time dedicated by the R/3 system to waiting for the return value of an RFC call plus the CPIC time required to create the connection for that RFC to an outside system", one would think that the time spent in the dispatcher by a returning RFC would be measured as "wait time" the same as when the dialog request first comes in from the front end. I've never seen a diagram that explained this satisfactorily.
Kind regards,
Peter

Q: Create a Pivot showing 3 sets of facts that relate to diff time periods

I am having difficulties trying to simply display, in a pivot table format, a query for:
- Budget by month for the past year
- Variance for the entire year
- Budget for the entire year.
I want to show the Budget MTD broken down over 12 months, then the Variance consolidated to 1 column for 2012, then the Yearly Budget consolidated into 1 column for 2012.
Unfortunately, I get 12 months of Budget MTD, 12 columns of Varience and 12 columns of Yearly budget.
This feels like a very easy solution, but I just don't know how to do this.
Thank you in advance for any help!
Charles

Motion-guru Marc Spencer from rippletraining.com has an episode upon Rigging at MacBreak Studio
MacBreak Studio - Episode 151: Setting up a Rig in Motion 5 for Final Cut Pro X
… I'm no expert (as you notice in my first post ), but I'm really overwhelmed by the endless options, esp. in correlation with FCPX… on first sight, 'rigging' looked like 'bundled color sliders' to me, but by creating your very own drop-down menus you can create extremely powerful tools, handcrafted for your very own needs.
For sport-reports, with its tons of statistics and inserts, you can create a box of 'title genrators' - once done, multiple times used, and extreeeemly fast then.
… And when a 'nnob' like me manages it, it is really no rocket-science…
Kudos to the DevTeam at Cupertino!!!

Time shift problem NOT RELATED TO WINTER TIME

I have a problem since yesterday : when I let my iPhone set the hour automatically, it goes one hour late!
It IS NOT the "winter time" problem. When I set manually the time, it is OK. As soon as I reset the automatic hour set (in the general settings), it goes one our late immediately and that stays even if I synchronise with iTune on a computer set to the correct time.

Hi jsonxp,
What is language of your PC Operating system you are using? Nokia Photos language installed on your PC etc?

Saving a relative chart time.

I noticed that when taking data the time displayed on the chart is moving slower then actual time. The other data displayed in the chart appears to have good response however. I suppose for the time being I can live with only having relative time as long as all displays are somewhat synchronized on display. I am trying to write all my data to a fileto graph in excel but dont want to use real time as a synch cause it seams that the relative time displayed by the chart is goes with the data. I dont know exactly how this data is synched in time. Any help would be great. Thanks so much.
Attachments:
Scan_Loop.vi ‏205 KB

Hi Tim,
The x-axis on your Waveform Chart is controlled by the Loop Delay and the XScale.Multiplier. In case the code in your loop takes longer than the Loop Delay, the loop will not continue until next iteration of the Loop Delay. This could cause some timing issues, since the code inside the loop may have non-consisting execution times.
You can include a timestamp to your data using the timing functions, and that way make sure that the x-scale will be relative to the time � being absolute or relative.
I hope this answered your question.
Best regards,
Philip C.
Applications Engineer
National Instruments
www.ni.com/ask
- Philip Courtois, Thinkbot Solutions

Noticed a time related issue in version: 6.22.0.10...

1) Recently updated to version: 6.22.0.107 and in my opinion the look & feel doesn't seem to be that great. Please provide users choice to revert back to older skin or continue with newer one...
2) Noticed a bug related to the time display associated with a contact:
I opted for Simple list view and when you click on a contact name (who is in a different country), the chat window opens up. Further, when you click on the thumb nail photo of a contact, a pop-up window with an enlarged image and details of : skype name of contact, location information, his country time, phone number, gender, language etc is displayed on it.
I normally observe this time before I call my contact in another country. The time displayed on this pop-up window never gets updated and always shows the time at which this window was opened. It gets updated only when the window is closed. The user will be mis-led to assume that the time of the contact shown on the pop-up window is the current time.
Have attached a screen shot of local contact, which clearly shows the time variations shown on pop-up window and the current time.
Elicit your response.
Thanks,
PK_Rao

Hi and welcome to the Skype Community,
Thanks for your feedback which I've shared with the product team.
Regarding the feedback on the new chat UI in 6.22: Please take a look at Skype 7.0 and the new options available and documented here: http://community.skype.com/t5/Windows-desktop-client/7-0-and-your-feedback-on-the-new-chat-UI/td-p/3...
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

The reason why time capsule running so slow

Temperature is the killer of Time Capsule!
I am live in Hong Kong, a very hot city, and using 500GB TC for a few weeks and experiencing all the problem other user mentioned already in this Forum. Base on my experience, if I turn on Time Capsule and running in Room temperature, it only running slowly and slowly and slowly! But after i turn on my room air-conditioner, TC working fine without any problem~~~
The reason why TC can't work in room temperature (I guess) is TC using Server HardDisk which designed for high performance server and running in GOOOOOOOOD temperature controller environment~~
If you don't have or don't want to turn on air-con. for TC, turn to put a big FAN near your TC and I hope it help.

Read the specs of TC - it clearly states that max operating temperature shouldn't exceed 35 degrees Celsius. Place a thermometer next to TC and monitor the temperature - you'll see that area around TC is always few to several degrees higher than your room temperature in any other place. So, if you are not using AC then your room temperature easy gets now to well above 30 C when outside is exactly 30 C. All your computer stuff and your body are generating heat and adding to the temperature. Thus you are for sure exceed max allowed operating temperature of 35 C around TC.
Also TC needs humidity below 80% (non condensing) to operate - at this moment there is 91% humidity in HK and if you are not running AC and keep windows open then you are again trying to operate TC in humidity well above max allowed.
TC's Environmental requirements:
Operating temperature: 50° to 95° F (10° to 35° C)
Relative humidity (operational): 20% to 80% (non-condensing)
Keep AC on at all time in HK my friend, except in the winter when humidity goes down. And keep good device monitoring temperature and humidity next to TC as well.

Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!

The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

My Mac Pro 2009 has the wrong time

I have an early 2009 Mac Pro 2.66GHz quad core Xeon processor, 20 GB RAM 2TB HD and a second 2TB HD for backup. Running OS 10.10.2. I have Parallels installed.
Starting with 10.9, I noticed that sometimes the clock was wrong. After the installation of 10.10, it seemed to get worse, although that may be unrelated. I have not seen my exact symptoms described in any posts related to this subject. Here is what I see:
I notice the time is wrong. It is never wrong by a certain number of hours. It can be off by 4 hours and 19 minutes and the next time 7 hours and 12 minutes. The day, however is usually correct. If I open the Date and Time control panel, the "Set date and time automatically" is checked and the Apple US server is chosen. The time is wrong. If I uncheck and then re-check the SD&TA checkbox, the time then corrects. However, a few minutes to hours later, the time will be wrong again. If I leave the Date and Time control panel open, the correct time seems to persist longer but eventually the time goes rogue. I even tried setting the time manually, turning off SD&TA and leaving the machine on without sleeping and it still became corrupted.
I have tried the following
Obviously, set the time and date automatically
Adjusting the time zones
Rebooting
Doing an NVRAM reset
Resetting the SMC
Reinstalling the OS (10.10)
Replacing the battery on the motherboard. When I removed the battery, I tested it and it was fine. I checked the position of the battery and it appears to be correct. It is the correct type of battery and fits perfectly into the slot. Just to be sure, I replaced it again.
Hitting it with a hammer (not really)
I saw some posts relating to the time zone being a problem, but the time is not off by an hourly interval, so that seems less likely. The one thing I thought was that perhaps Parallels is causing some sort of problem, but I could find no posts.
The machine is still great after 6 year. I use it almost every day all day. While this problem is small, it has large consequences because my calendar is off and I'm missing meetings, the time on my emails is weird, my file creation times are off and anything related to time is corrupted. I'm facile with Unix so if the solution involves the command line, so be it. I've had macs since a Centris 650 back in the dark ages 20 years ago but this one has stumped me.
Thanks for any help.

You have done all the appropriate things.
There have been reports of odd bugs related to Date & Time when a group of non-standard settings was set (deliberately or "just because") in the "Language & Region" Preferences.
I recommend you actively change those settings to a standard setting (that you do NOT intend to keep, e.g. Europe --United Kingdom), save Changes, close the Preferences pane, then re-Open, change to a standard set of Preferences (that you DO Intend to keep, e.g., Americas -- United States) save changes, close the preference pane, then check and reset the date&time and test. [If I have guessed incorrectly about your location in the world, no offense was intended.]

How can I collect and record data in LabVIEW from Sensirion Temperature/Humidity Sensor connected to myRIO?

The product documentation of the sensor and the datasheet is attached. Also Digilent MXP Breadboard's image is attached.
I've connected the sensor to myRIO using the starter kit's MXP breadboard: http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,842,1216&Prod=MXP-BB
The output of the sensor is in digital. My initial goal is to get digital output in form of 8 or 12 or 14 bits and then convert them to decimal numbers and record them.
Pin 1 of sensor is Data, which is connected to myRIO's connector A, DIO1 pin 13.
Pin 3 of sensor is Clock, which is connected to myRIO's connector B DIO5/SPI.CLK pin 21. According to the datasheet of the sensor, if VDD < 4.5V then Clock should be set to 1MHz.
Pin 4 of sensor is Ground, which is connected to Digilent MXP Breadboard GND pin.
Pin 8 of sensor is VDD, which is connected to Digilent MXP Breadboard +3.3V pin. Supply voltage range is 2.4-5.5V and recommended voltage is 3.3V.
I need to be able to send the following commands to the sensor from LabVIEW.
Measure temperature: 00000011
Measure relative humidity: 00000101
Then, myRIO has to wait for maximum 20 milliseconds (ms) for 8-bit measurement, 80 ms for 12-bit measurement, and 320 ms for 14-bit measurement.
Two bytes of measurement data will then be transmitted. myRIO as microcontroller must acknowledge each byte by pulling the DATA line (pin 13) low. All values are Most Significant Bit (MSB) first. Note that for 8-bit result, the first byte is not used. Finally, myRIO has to terminate the communication after the measurement data Least Significant Bit (LSB) has been received by keeping ACK bit, which is the LSB bit, as high.
Attachments:
Digilent MXP Breadboard.jpg ‏96 KB
Sensirion-Temerature-Humidity-Sensor-Documentation.pdf ‏136 KB
Temperature-Humidity-Manufacturer-Datasheet.pdf ‏323 KB

Have you searched the forum?
http://forums.ni.com/t5/LabVIEW/Sensirion-sht7x-labview/m-p/350958/highlight/true#M179022
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

When using the LabVIEW Simulation Module, how can I start a frequency sweep with the Simulation Chirp signal generation VI at an arbitrary time after the simulation initial time?

I'm using the Simulation Loop on LV RT when interacting with some hardware (i.e. all I/O is happening in the Sim loop). I'm going to conduct a frequency sweep test on the hardware and want to use the Simulation Chirp function. However, there is no way (that I can see) to trigger the Chirp to start at some event (i.e. I click a boolean on the front panel and enter a case statement). The Chirp is tied to the global time of the Simulation loop and so are it's input parameters. Is there a way to make it relative to some time at which an event happens?

Craig,
Your solution will 'cut' the beginning of the signal and only show the signal afterwards.
To control when the chirp should start, the best option is to use the Chirp Pattern.vi ( in the Signal Generation palette) and use a Lookup table to control when to feed the time. The shipping example (in LabVIEW 2013) shows how to code using a lookup table.
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Chirp.vi
Then, to start from a toggled boolean, look at the example:
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Step.vi
and Here is the example in 2013 (in attachment):
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments
Attachments:
SimEx Chirp with Delay.vi ‏241 KB

ITunes sometimes won't see media on my time capsule, and I have to remind it where it is !!

Hello,
I use a MacBook Pro to run iTunes, and my media sits in two locations.
1 Music, books, Apps etc are locally on the MacBook
2 Movies and TV Shows are on my Time capsule.
iTunes never has a problem with finding local hard drive content, however it only seems to find 50% of the time capsule media.
I get the apostrophe that suggests iTunes cannot find it, however if I select "get info" it knows where it is. (and will work fine from there)
It has become very frustrating, as it is never the same files it cant find, always different !!
When speaking to Apple (in-store) he was convinced it was a network speed issue related to the time capsule, however after speaking to Apple Care, they say it is not a recognised configuration (to store files away from the local Mac) and hence wont help me !!
Im convinced I cannot be the only one with this issue as we download more and more content our local hard drives are just not big enough to cope.
In summary, I just want to open iTunes and all my content be visible !!
Thanks

Your Time Capsule is on and running well before starting iTunes?
Although I think the AC person was going a bit by the book in the configuration comment, the person does have a point and it is not recommended you keep content other than backup files on a Time Capsule. If for no other reason you do not have a backup for your content you are keeping there.
Since you are saying this is happening with different files each time, but iTunes is able to find them when you get info on the file, I think it could well be a network issue and because you are using your Time Capsule for multiple purposes which includes large files. When you are starting iTunes it is trying to do something with the files and there isn't enough capacity for iTunes to do it and it is reporting files as missing. When you do it more leisurely one-by-ne by getting info it is having time to find them and is reporting them as okay. Which files this happens with may just be am atter of slight differences in what is happening each time you start iTunes and your network drive.

SSAS Date Parameter times out

Environment: We are running SQL Server 2012 Standard Edition with Analysis Services. Reporting Services on a separate machine. Visual Studio 2010.
I have a Date dimension with a generated table named Time. To the table I have added custom columns to show Week_Ending and Short_Date_Alpha that are used in Excel Reports from the Analysis Services Cubes.
When I attempt to use this dimension in Reporting Services, it times out if I try to use it as a parameter. The report will run for 30 minutes, never surface the parameter selection box and then eventually time-out with an unknown error related to
the time dimension. This is in Visual Studio.
If I pull the dimension directly from the SQL table I can produce a report on it. If I run the full query for the measures with the default date selected it runs in seconds in the query builder.    Here are 10 rows of the relevant
table structure:
PK_Date Date_Name Reporting_Year Reporting_Year_Name Reporting_Month Reporting_Month_Name Reporting_Week Reporting_Week_Name Reporting_Day Reporting_Day_Name Short_Date_Alpha End_of_Week_Name Week_Ending WorkDay
2008-01-01 00:00:00.000 Tuesday, January 01 2008 2007-01-07 00:00:00.000 2007 2007-12-02 00:00:00.000 Rpt Dec 2007 2007-12-30 00:00:00.000 Reporting Week 52, 2007 2008-01-01 00:00:00.000 Tuesday, January 01 2008 Jan
1 2008 WE 01/07/08 2008-01-07 00:00:00.000 1
2008-01-02 00:00:00.000 Wednesday, January 02 2008 2007-01-07 00:00:00.000 2007 2007-12-02 00:00:00.000 Rpt Dec 2007 2007-12-30 00:00:00.000 Reporting Week 52, 2007 2008-01-02 00:00:00.000 Wednesday, January 02 2008 Jan
2 2008 WE 01/07/08 2008-01-07 00:00:00.000 1
2008-01-03 00:00:00.000 Thursday, January 03 2008 2007-01-07 00:00:00.000 2007 2007-12-02 00:00:00.000 Rpt Dec 2007 2007-12-30 00:00:00.000 Reporting Week 52, 2007 2008-01-03 00:00:00.000 Thursday, January 03 2008 Jan
3 2008 WE 01/07/08 2008-01-07 00:00:00.000 1
2008-01-04 00:00:00.000 Friday, January 04 2008 2007-01-07 00:00:00.000 2007 2007-12-02 00:00:00.000 Rpt Dec 2007 2007-12-30 00:00:00.000 Reporting Week 52, 2007 2008-01-04 00:00:00.000 Friday, January 04 2008 Jan
4 2008 WE 01/07/08 2008-01-07 00:00:00.000 1
2008-01-10 00:00:00.000 Thursday, January 10 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-06 00:00:00.000 Reporting Week 1, 2008 2008-01-10 00:00:00.000 Thursday, January 10 2008 Jan
10 2008 WE 01/12/08 2008-01-12 00:00:00.000 1
2008-01-11 00:00:00.000 Friday, January 11 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-06 00:00:00.000 Reporting Week 1, 2008 2008-01-11 00:00:00.000 Friday, January 11 2008 Jan
11 2008 WE 01/12/08 2008-01-12 00:00:00.000 1
2008-01-12 00:00:00.000 Saturday, January 12 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-06 00:00:00.000 Reporting Week 1, 2008 2008-01-12 00:00:00.000 Saturday, January 12 2008 Jan
12 2008 WE 01/12/08 2008-01-12 00:00:00.000 0
2008-01-13 00:00:00.000 Sunday, January 13 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-13 00:00:00.000 Reporting Week 2, 2008 2008-01-13 00:00:00.000 Sunday, January 13 2008 Jan
13 2008 WE 01/19/08 2008-01-19 00:00:00.000 0
2008-01-19 00:00:00.000 Saturday, January 19 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-13 00:00:00.000 Reporting Week 2, 2008 2008-01-19 00:00:00.000 Saturday, January 19 2008 Jan
19 2008 WE 01/19/08 2008-01-19 00:00:00.000 0
2008-01-20 00:00:00.000 Sunday, January 20 2008 2008-01-06 00:00:00.000 2008 2008-01-06 00:00:00.000 Rpt Jan 2008 2008-01-20 00:00:00.000 Reporting Week 3, 2008 2008-01-20 00:00:00.000 Sunday, January 20 2008 Jan
20 2008 WE 01/26/08 2008-01-26 00:00:00.000 0
The dimension looks fine when I browse it.   It produces the correct information in the Excel Reports, but I cannot get it to work in Reporting Services.
I have deleted dates out of the cubes and processed, then added the Time dimension back in and processed and it still won't work.   I have a cube running off a table called Date and that seems to work.
Is the issue with the table name? With the custom descriptions?   Something else?

How would you best suggest limiting the time frame?   Add a filter to the query so that the future dates are not part of the selection?   I'm doing some data refresh in the data mart so won't be able to try limiting the selection
for a few hours.
Hi Diane,
Could you please let us know how many available values for your date parameter(the quantity of date dimension in SSAS)? One workaround that we can try to add an additional text parameter which will prefilter the available values in the large parameter list.
Here is similar thread about this topic for your reference, please see:
http://dataqueen.unlimitedviz.com/2012/02/filter-a-parameter-with-long-list-of-values-using-type-ahead/
Regards,
Elvis Long
TechNet Community Support

Run-time error '1004' -- Method 'Container' of object '_Workbook' failed

Dear All,
One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
Run-time error '1004'
Method 'Container' of object '_Workbook' failed.
I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
Could anyone please tell me how this error can be eliminated for the user?
Regards,
Lakshmi.

Dear Arpan,
We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
Regards,
Lakshmi Venigala.

Adding a second time capsule?

I've reviewed some of he discussion on adding a second Time Machine but two issues arise. The information relates to older Time Machine software and leads to confusion.
I have an Airport Extreme with S/W version 7.6.4 and would like to add a newer Airport Extreme to back up the older one. Reading the suggestions on adding a new TC didn't cover the newer Time Machines and I could find Apple's instructions for doing it.
Somewhere I read that the new TC could be connected to the old TC but forgot the port setup. Also, newer instructions for adding a second TC so both the old and the new acquire the same data could not be found.
Hope This question is clear. Is there help on this?

The network setup is fairly trivial.
Plug TC2 into TC1. (the hardware is Time Capsule.. TC as per your title.. or is it Airport Extreme as per your question..?? Time Machine is software on your computer.. and totally unrelated to the hardware.)
Makes no difference which way around you do it. Plug WAN of the 2nd device into LAN of the 1st device. And setup the 2nd device in bridge.. wireless is up to you.. off or on?? Roaming or not??
As far as backup is concerned.. you need to be clear in the question. And sorry it is a bit mixed up now.
But I can tell you what you cannot do.
You cannot backup to both units at once. You can however setup Time Machine in the computer to backup sequentially to both.
See Q34 http://pondini.org/TM/FAQ.html
The TC itself cannot backup to another TC.
(extreme with hard disk amounts to the same thing.. with caveats)
You can backup one TC to another manually via a computer.. it is slow and I do not recommend it.. if a fault creeps into backup1, you are simply copying said fault to backup2.. AND it is poor for another reason.. Time Machine cannot do it.. you will need another utility eg Carbon Copy Cloner.. and even then you will probably end up backing up a huge amount of data every time.. since TM works so strangely you cannot just backup differences.

Relative humidity vs time VI

Similar Messages

Maybe you are looking for