Release date, vendor ID, and account joining?

It is great to see the continuing of updates to ADE, especially for accessiblity! I have a few questions:
1) Is there any ETA for the release of ADE 1.8? It seems it has been previewing for quite a while
2) It seems 1.8 adds support for pass-hash ("social") DRM ("B&N"). However, will ADE 1.8 support the "Vendor ID" feature?
3) opening a book fulfilled to an Adobe ID that is different than the Adobe ID ADE is activated with: ADE 1.8 now prompts for the new Adobe ID credentials.
-This is nice!
-Is this performing a "join" of those two Adobe IDs? Or is it just activating both and leaving the two Adobe IDs un-joined?
Thanks!

@asanford-EP just add a book which was fulfilled with a VendorID and the form to activate it will pop up... though... it didn't worked for me
but it worked with a previous activation of VendorID, made wrongly by our software, overwriting the data from ADE 1.7
... I opened the book with ADE 1.8 with the old activation, and that worked... I couldn't open my old books though (AdobeID activated) ... probably cause I ran out of activations
I opened up another discussion for that... http://forums.adobe.com/message/4538045#4538045

Similar Messages

Vendor address and account group

Hi experts, could you tell me where can I find the vendor address and account group as well. So I need one table or transaction which contains all the data which I need.
Thanks in advance.

Hi
You can use a Query transaction code is SQVI
select table join
Select table LFA1 and LFB1
join the table on field LIFNR
Your will get the desired output.
If the answer resolve kindly assing points
Thanks & regards
Mahesh

EDI vendor invoice and account invoice

can u please explain me
1.EDI Vendor Invoice
2.Account Invoice

EDI Vendor invoice is nothing but the LIV or FB60 invoice posted using EDI that is IDocs...
and account invoice u can say FB60 invoices, that is they are posted only in accounting. they do not have a purchase order or a gr..
Regards
Anantha

New HP Envy15 release date in France (and Taiwan?)

Hello there!
I'm very interested in getting the latest HP Envy15, but so far it seems it's only available in the US...
When will it be released in France and/or Taiwan?
Also, if it is released in those countries, will it be as customizable as it is in the US? I would like to get one with SSD drive, for instance...
If there is no plan to have it released in Europe or in Taiwan, is it possible to oreder it from the US and get it delivered in one of those countries?
Thanks in advance!

*up*
No one has an idea on that?

New firmware m1217nfw release date and other questions ...

Hi everybody!
Does anybody knows when a new firmware update will be released? It seems that the latest release (2013-09-30, version 20130912) has a serious known issue and HP recommends : "Please do not update with this version" on the web site ...
The problem is that the version installed on my printer (version 20130211) seems to have a potential security vulnerability. The vulnerability could be exploited remotely to gain unauthorized access to
data! An intermediate firmware version (2013-07-26, version 20130703) was previously released to correct this issue but I can't find it on hp web site. Does anybody knows where I can find it???
My last question is about firmware update : HP recommends to update firmware by using an USB 2.0 cable connected to the printer. I successfully updated the firmware (twice) with the network interface of the printer. Should I avoid this method and use an USB 2.0 cable?
Thanks in advance for your reply.

You can't.
They did this for a reason, as part of FairPlay.
There's no way to get around this.....
If the information on the purchase content is wrong (like wrong release date), contact Apple, and they might be able to correct it.
Message was edited by: Kento Ito

Why can't "release date" and other info be edited?

In iTunes 9 for Mac, I've noticed a new information field called "Release Date". However, that field is not in the info tab when editing the file info. Clicking on that field does not make it editable either. Does not matter which song. What is wrong? Why is this field not in the edit info tab?

You can't.
They did this for a reason, as part of FairPlay.
There's no way to get around this.....
If the information on the purchase content is wrong (like wrong release date), contact Apple, and they might be able to correct it.
Message was edited by: Kento Ito

Validation required so that invoice, billing and accounting is done on same

Validation required so that invoice, billing and accounting is done on same date as the PGI date. Very urgent please help.
Please look into the below scenario.
Excise invoice posting date u2013 07.10.2011
A/c doc posting date u2013 29.09.2011
Reflecting in dispatch report of 07.10.2011.
GL affecting in the month of Sep.
So it want that on PGI date, billing , invoice and accounting enteries are created

Dear Jalaj001,
PGI date will be taken by system as the billing date in VF01 unless the user manually changes it.
Accounting Posting date can be controlled by settings for document type RV.
For excise invoice creation and posting date, i think you will have to use EXITs.
But i am not sure and will leave it for the experts to comment upon.
Thanks & Regards,
Hegal K Charles

Oracle9i Release dates

Has Oracle9i been officially released or is it still in beta mode ?
I scanned Oracle web sit and did not find any course offerings or OCP tracks for Oracle9i leading me to believe it is still in beta.
If not what are the proposed release dates for Unix and Nt ?

If you are asking about 9i Application Server, the production version of Oracle 9i Application Server is available TODAY from the Oracle store and via trial download from the Oracle Technology Network (http://technet.oracle.com).
However, I suspect that you are asking about the 9i Database.. For that, I am checking with the beta program folks for that, and expect an answer soon..

What are the T-codes that contain the master data for material and vendor?

what are the T-codes that contain the master data for material and vendor?

hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat.

Difference between Invoice Date, GL Date and Accounting Date Oracle AP

Hello,
I have a question that might help a lot of people too later.
I tried to run these queries
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.INVOICE_DATE <> aida.ACCOUNTING_DATE
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.GL_DATE <> aida.ACCOUNTING_DATE
I can see that there are lot of results for these queries, where the Invoice Date is not equal to the Accounting date and the GL_Date of an invoice is not equal to the accounting date in the distributions table.
So, what is the difference between these dates.
And if I had to take the Invoice Accounting document entry date, which date do i have to take for these invoices in AP
Thanks
Bob

Hi
Let me try to explain this with an example.
Suppose I buy some stationary from a vendor and he provides me with a detailed invoice of the goods puchased.
In this case the invoice will always have a date printed on it and this date should ideally be entered in the invoice date at AP_INVOICES_ALL level.
Now suppose the invoice happens to be received by me in february and for some reason I could not capture the invoice in my books in february and made a provision for the liabilities and close the books.
However in march i want to book the invoice say on 10th of march in my books and pay the vendor the amount payable.(I Have to reverse the already provided liability in march to reverse the accounting effect).
In this case my book entry date of invoice is the accounting date i.e. 10 March.
In case of oracle, the accounting is maintained so that the invoice header hits the liability account while the invoice distribution hits the charge account(expense account so to say). And to gain more flexibility oracle provides date in both header and distributions to provide an option of booking liability and charge on different dates..
As per the 11i checks there is no check on any of these dates except that accounting date at header and ditribution level must be in an open AP and GL period.
Thanks
MAV.

Release date set to 1/5/11 for all podcasts and iTunes U files

I have an ongoing problem with iTunes on my MacBook Pro where the release date is set to 1/5/11 for all podcasts and iTunes U files. Although I can seemingly correctly sort by release date, the date is the same across all files. Can someone advise as to how I might go about correcting this such that the actual, proper, release date is shown? Thanks in advance for the help! - mvrb

@King_Penguin thanks for your help
See below some additional info:
I have 3 Macs:
1 X MBPr 2012 (OS X 10.9.1
1 X MBPr 2012 (OS X 10.8.5)
1 X iMac 2009 (OS X 10.8.5)
1) All 3 Macs have access to same accounts and have same apps in iTunes.
2) Problem is only found on both MBPr's 2012 with one NL and 1 US account. With one NL account (inactive) I have no issue on all three.
FYI I have multiple iTunes accounts: 2 for the Netherlands and 1 for US.
I also tried this after deleting the only 2 apps I got from the US iTunes Store but that did not solve my issue.
I think the matter is related to my iTunes account(s) and NOT to a computer (prefs file)

Credit block and release Date and time

Dear All,
I require a report which can display credit block status date and time and credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
Kinldy help
Thank you,
NoMi

Hi,
IF it is not mentioned in single program .
You can develop a query by using multiple program. Please find the list of programs for CM
+Reports for Credit Management+
The following table provides an overview of all the reports available to you in the area of credit
management
Program Function
RFDKLI10 Customers with missing credit data
This report checks the data for the credit limit for completeness, and produces
the corresponding error lists. These can be used to re-maintain the
corresponding definitions manually, or per Batch Input.
RFDKLI20 Reorganization of credit limit for customers
This report enables you to reorganize the credit limit information in the control
areas.
RFDKLI30 Short overview credit limit
The report lists the central and control area-related data per customer.
RFDKLI40 Overview credit limit
The report provides you with an extensive overview of the customeru2019s credit
situation.
RFDKLI41 Credit master sheet
The credit master sheet enables you to display and print out the customer
master data for a single account, which is needed for the area of credit
management.
RFDKLI42 Early warning list
The early warning list enables you to display and print out customers in credit
management, who are viewed as critical customers in the area of credit checks
in SD.
RFDKLI43 Master data list
The master data list enables you to display and print out customersu2019 credit cards.
In particular, you can display information not contained in the standard system,
for example, user-defined fields or external data, which you have created with
specific additonal software.
RFDKLI50 Mass change credit limit data
This report allows quick mass change for master data in credit management.
RFDKLIAB Change display, credit management
With this report, you can display changes for credit management master data for
all accounts.
RVKRED06 Checking blocked credit documents
The report checks all blocked documents from credit view. The report is started
in the background, and should run after the incoming payments programs.
FI/SD - Credit Management/Risk Management SAP AG
Reports for Credit Management
RVKRED77 Reorganization credit data SD
The report enables you to reorganize open credit, delivery and billing document
values. It is used, for example, when updating errors occur.
RVKRED08 Checking sales documents which reach the credit horizon
The report checks all sales documents, which reach the dynamic credit check
horizon, as new. The report runs periodically, and should run at the start of a
period. The period for the u2018date of the next credit checku2019 is proposed from the
current date, with the help of the period split for open sales order values.
RVKRED09 Checking the credit documents from credit view
Released documents are only checked if the validity period for the release has
run out (number days).
RVKRED88 Simulation reorganization credit data SD
REgards,
Krishna O
Edited by: Krishna O on May 20, 2010 11:30 AM

Release date and time for Purchase order

Hi Masters,
Could you please let me know that in which table the release date ane time will get stored for purchase order.
Regards,
Panneer

Hi,
You can find out from CDHDR & CDPOS table.
Select Date Time from CDHDR table & Join with CDPOS table where CDHDR-OBJECTCLAS = EINKBELEG and CDHDR-OBJECTID = PO number and CDPOS-TABNAME = 'EKKO' and CDPOS-FNAME = FRGZU and CDPOS-VALUE_NEW = 'X'.
You will get the date time from CDHDR table.
Regards,
Udayasankar Rajagopalan

Billing document date and accounting document date varying...

Hello Experts,
There is one billing document and the date of invoice is, say today, 12/01/2009. and the accounting document date is, say 15 days ahead or behind, 27/01/2009.however, the posting date is proper and according to the billing date and that is again dated today-12/01/209. Now, the user wants to know why the difference exists between the accounting document date and the billing date. any idea? there are some user exits being used but I cant make out, neither the abaper. suggestions please.
Regards,
N.Raja Sekhar.

Dear Raja Sekhar
Document date is nothing but the date on which that particular transaction has taken place. But I dont know where you get the date as 27-01-2009.
It is a general practice that for exports billing document, there would be a Posting block and once the exporter receives the B/L, based on that date, the billing document would be released manually. For this, there is an user exit to input the B/L number and date and release the billing document.
So here, what the end users normally does is that the B/L Date might be on 02-01-2009 but he would not have updated on the same date. At a later date, say on 12-01-2009, he can input the B/L Date (in another words, it is Posting date) as 02-01-09 and execute the billing document.
If you see the accounting document here, the posting date would have been 02-01-2009 but the document date would be 12-01-09.
thanks
G. Lakshmipathi

Vendor and Account Assignment Issues

Hi All,
Iam Working in ECS SRM 5.0,
When We are trying to creat SC, we are getting following errors :
1.Vendor 0000100029 not intended for purch. org. (Item Sourcing Strategy & Plan Consulting )
SOS is automatically assiged to particular product ID thru Purchasing Contract (Purchasing Contract created locally).Vendor is assigned to the Purchasing Contract.Vendor is properly mapped to the respective Purchasing Organization as recored in the table BBPM_BUT_FRG0061.Purchasing Contract is also mapped to the same Purchasing Organization of Vendor.
2.Account 50011 requires an assignment to a CO object (Item Sourcing Strategy & Plan Consulting )
2.1 Error in account assignment for item 1
Account assignment Categories and G/L Acc. are properly maintained and activated in SRM for each Product Category. same values for G/L Acc. and Acc.Assignment Categories are maintained in R/3. In R/3 when we checked in the tables SKA1,SKB1 & SKAT all these entries are maintained properly.
In our project Scenario we don't require CO Component only AP Component is Configured for our Business Requirement.
Full points will be rewarded for the solution.
([email protected])

Hi
Please go through this ->
Please implement following SAP OSS Notes ->
Note 1026168 - Vendor &1 not intended for purch. org. &2
[ This is caused due to a program error. The reason for this error is, purchasing organization and purchasing group are always assigned at header level and in this case SRM is passing the item guid to determine the backend purchasing organization and purchasing.group. The header guid should be passed instead. ]
Q 3: Why does the system issue message KI 235 - 'Account & requires an assignment to a CO object'?
Answer ->
--> In SRM, you always have to post to a G/L account and to a CO object. Exceptions: Direct material scenario - account assignment occurs in the OLTP regardless of what was previously entered in SRM. For external requirements, the primary system is the OLTP from which the demand is issued and sent to SRM. In this case, account assignment changes are not allowed in SRM because this would lead to inconsistencies (in follow-on documents as well) when compared to the primary system.
--> In /OBA5, you can suppress the message or define it as a warning message. Since only error messages are transferred to SRM (BBP_PD 047), the message then no longer is issued in SRM. Do not consult the FI/CO team when implementing the changes.
(See related SAP Consulting Notes - Release-Independent
Note 815849 - FAQ: Account assignment system response)
Hope this will definitely help. Do let me know.
Regards
- Atul

Release date, vendor ID, and account joining?

Similar Messages

Maybe you are looking for