Release of a transport does not copy file to other system

Hi All
I am struck with an issue. When I release a transport request from my DEV server, The corresponding files donot get copied to the local transport directory of QAS system, resulting in the non listing in the import queue of the QAS system.
I have checked the mentioned
1. STMS configuration is all active and all nodes are attached to the domain controller (DEV) with all green buttons
2. Single global transport group is configured for all the systems
3. QAS server can access the global transport directory in DEV system
4. RFC connection to QAS server from DEV server is fine
5. RDDIMPDP is scheduled in 000 client of DEV system through DDIC using Report RDDNEWPP
6. RDDIMPDP is scheduled in 000 client of QAS system through DDIC using Report RDDNEWPP. However, in SM37, the schedule does not get displayed.
7. The /sapmnt/sap/trans directory of QAS system is writable
8. /usr/sap directories of DEV and QAS system is shared as saploc and sapmnt
Any ideas of what could be the error.
Regards
Lokesh

>
Lokesh Gupta wrote:
> 2. Single global transport group is configured for all the systems
>
> Lokesh
Hi,
All Systems belonging to the same transport group must share
the same DIR_TRANS. You need to setup diffrent Groups, if you like
to use a local transport directory.
WARNING: When using diffrent groups, but DIR_TRANS on these systems
points to the physical same directory, your transport files will get damaged
when trying to operate them !!! Read the documentation carefully to know
about the pitfalls of local transport directories.
Volker

Similar Messages

  • Release Management vNext Powershell Could not load file or assembly System.Management.Automation Version=3.0.0.0

    Hi,
    I'm running TFS2013.4 with a number of build servers and all working fine. 
    I'm also running Release Management with update 4 (12.0.31101.0) and am running into trouble when trying to run my first dummy release.
    I have setup my servers, stages, releases paths, components and release template (all vNext) with out issue.
    When I run my Release Template (Deploy Using PS/DSC) I'm getting the following error :-
    System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> System.IO.FileNotFoundException:
    Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
    The system cannot find the file specified.
       at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.PowershellExecutor.DisposeCurrentSession()
       at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.RemoteDeploymentHelper.Dispose()
       at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunAsync>d__11.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunPowerShellAsync>d__1.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<CopyBuildsLocally>d__5.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<RunScript>d__0.MoveNext()
       --- End of inner exception stack trace ---
       at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
       at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.InvokePlatform(String activityId, MachineSpecification machineSpecification, StorageSpecification storageSpecification, String scriptPath, String configurationPath,
    Dictionary`2 configurationVariables)
       at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.RunScript(DscComponent dscComponentParameters, String serverName, String userName, String password, String componentName, String scriptPath, String configurationPath,
    String useCredSecuritySupportProvider, String useHttps, String skipCACheck)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.Dsc.DscComponentInstaller.InvokeMethodByReflection(String methodArguments)
    I can't work out if my target machine (2008 R2 SP1) has a problem with WMA 3.0 or if the Release Template can't find the powershell script that I'm trying to call.  I figured that the relative path to the script could be wrong and have tried numerous
    iterations to no effect.  The error clearly points to a problem with WMA right?
    The target machine has .Net Framework 4.0, WMA Framework 3.0 and I can run Enter-PSSession to remote to it etc...
    Before I trash and rebuild my target machine I hoping someone may have some insight to my problem?
    Thanks in Advance
    Jason
    shroomie

    Daniel,
    The PS Script is taken from an MSDN blog and is fairly standard.  I'm sure it will run fine when executed, but I've not run it as it requires environment variables ($applicationPath) that will be present in the Release Management session calling it. 
    Here's the script :-
    configuration InstallModules
        param
            # Target nodes to apply the configuration
            [string[]]$NodeName = 'localhost',
            # Source Path for Modules
            [String]$SourcePath = "$applicationPath\Deploy\Modules",
            # Destination path for Modules
            [String]$DestinationPath = "$env:ProgramFiles\WindowsPowershell\Modules"
        Node $NodeName
            # Copy the Modules
            File ModuleContent
                Ensure          = "Present"
                SourcePath      = $SourcePath
                DestinationPath = $DestinationPath
                Recurse         = $true
                Type            = "Directory"
    InstallModules
    Thanks
    Jason
    shroomie

  • Playing but not copying file from other drive?

    How can I play an audio file or a video off an external hard drive connected directly to my mac or accessed over a wireless network without the file being copied to the mac that it is being played on?
    Thanks.

    Turn off the option in iTunes to "copy files to iTunes Music folder when adding to library" in the iTunes -> Advanced -> General preferences). Then when you add the track to iTunes, it won't be copied to the internal drive.

  • File transport does not have read/write privileges for receive location???

    Hi all.
    I try to read an EDI-file from a file location.
    In configured the receive location but when I enable it I get an error message in the log saying:
    File transport does not have read/write privileges for receive location "Location"  (Event ID: 7183)
    The location is correct (I used the browse option) and the folder is shared with all users (full access for everybody).
    How can I get rid of this error

    There can be many reasons for this error. First of all try the KB article http://support.microsoft.com/kb/888498 . Then try the solution on this link http://bluebiztalk.blogspot.com/2008/05/file-transport-does-not-have-readwrite.htmlAbdul Rafay
    http://abdulrafaysbiztalk.wordpress.com/
    Please mark this as answer if it helps

  • Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

    Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
    Can anyone please help?
    Thanks

    The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
    You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
    What you are doing to sync them should work i.e.
    - connecting the iPad to your Mac
    - selecting the iPad on your Mac's iTunes
    - selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
    You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there  then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
    By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
    And do a soft-reset and retry syncing.
    I assume that music and other items sync ok ?

  • Re:Which port does the copy file function use?

    Hi ,
    How does the Copy File Function work?
    Which port is used?
    My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
    Regards .

    Hi hussein ,
    Please find the details
    1)Please post the details of the application release, database version and OS .
    App Release: 11.5.10.2
    DB Version: 10.2.0.4
    IBM AIX on POWER Systems (32-bit)
    2)How does the Copy File Function work?
    What copy file function you are referring to? Please post the navigation path.
    1. Submit Request
    2. View Output File
    3. Tools --> Copy File
    3)Which port is used?
    My problem is … When user copies the large request output file, the network is slow. So I want to manage bandwidth such as using Qos .
    How are you planning to manage the bandwidth of specific port?
    If I know which port is used, I can manage it (give it to low priority)
    Regards .

  • Mac OS X can not copy files...?

    I am very new to Mac OS X and I found it strange that I can not copy files from my hard drive (docs, spreadsheets) to a blank CD-ROM disk. I called the local Apple store and they said I have to buy a third party application to copy(burn) files to CD-ROM disks. I am not talking about copying copyrighted files, just plain old Word and Excel docs. Does anyone know if this is true? I have to get a separate application to do this? Thanks, Tony.

    You can certainly copy files to to a blank CD without extra programs. But once there is data on the disc, it becomes much more complicated to add data at a later date.
    Windows, however, had a proprietary CD filesystem that let you use the CD like a floppy disc, where you could add and "erase" files randomly.
    You can buy an inexpensive program called BurnAgain that does something similar on the Mac.
    http://freeridecoding.com/burnagaindvd/
    Frankly, though, I think CDs make bad floppy discs. There is much more chance for data corruption when they are re-written.
    I'd recommend an inexpensive USB Thumbdrive (Flashdrive). They come in all sizes and really do work like a giant floppy disk -- only much faster. They are dirt cheap. You can find one the capacity of a CD for about $10 or less. DVD-size flashdrives are now under $40 some places.
    The easy way to burn data (once) to a CD or DVD is to create a Burn Folder. Hold down the CTL key and click once on your desktop. You'll get a pop-up menu with a choice to create a New Burn Folder. Name the Folder what you want the Disc to be named. Then open the folder and drag the files or folders you want to Burn onto the burn folder. It will actually create links (aliases or shortcuts in Windows terms) to those items. Click on the burn button at the top of the folder and it will ask for you to insert a blank CD or DVD.
    You can discard the burn folder if you are through with it, because it just contains alias (shortcuts). But I must warn you that if you navigate into the subfolders of those shortcuts, you will be dealing with your actual files. So please, don't delete anything inside a folder inside a burn folder -- those are your real files!

  • Ipod failing to sync properly and cover art does not copy

    Hello. My ipod wont sync properly, fails after about 10 albums with unknown error -53, and album cover art does not copy (fine in itunes). Have restored etc. Have uninstalled and reinstalled itunes software etc.
    Have tried apple support helpline; send ipod off twice, just received replacement new/refurbished ipod today (as on 2nd attempt apple technicians found a problem they called "specific performance symptoms" with the old one).
    New replacement one has the same problem as old one!
    Has anyone seen this problem or had any joy getting a refund?... Any help much appreciated, thanks.

    Select the iPod in iTunes.
    Click the Music tab.
    Are you selecting Sync all playlists?
    Or if you are choosing Selected p[laylist, mkae sure all the playlists you want to sync are checked.

  • Folders that I copy from my Macbook to my External Hard Disk does NOT appear on any other drive that I connect the Hard disk to (TV, PC, ... etc.)

    I'm facing a bit of a problem.
    Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
    The Hard disk format is "MS-DOS (FAT)".
    The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
    I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
    I'd appreciate some help. Thank you.

    Hi Simon.  How is it formatted, FAT or NTFS? 
    I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS.

  • Java does not get file list from shared folder in another server.

    Hi,
    I'm using java 1.4.2.16,
    Command below does not get file list.
    import java.io.;*..
    File file = new File("\\\\10.242.22.28\\SapMII");
    File[] files = file.listFiles();
    SapMII folder is Everyone full Control permission.
    How can i solve this problem?
    Thanks.

    Could you please post replies in a more helpful way? Just informing me that it was an NPE doesn't really tell me anything. Post the stacktrace (Exception#printStackTrace()). And the listFile() methods API has this to say:
    Returns null if this abstract pathname does not denote a directory, or if an I/O error occurs.I'm able to run this sample code easily:
    import java.io.File;
    public class TestFileList {
         public static void main(String[] args) {
              File file = new File("\\\\10.40.55.33\\shared");
              File [] files = file.listFiles();
              for(File currentFile: files )
                   System.out.println(currentFile.getName());
    }

  • Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9.  Why?

    I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files.  For instance,  when trying to open a PDF file with the name
    filename10.5.11.pdf  in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
    I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

    The version is Adobe Reader 10.1.0    I will request the latest version
    and let you know if that fixes the problem
    Actually I had changed the name of the file so our associates could access
    the file (changed the  .  to a hyphen)  It still made me wonder why Reader
    wouldn't open it at that time.
    Thanks again for you assistance and I will let you know if this resolves
    the  issue.
    Regards,
    Susan
    From:   Ankit_Jain <[email protected]>
    To:     SusanPleso <[email protected]>
    Date:   10/19/2011 12:56 AM
    Subject:        Adobe Reader does not recognize file name
    (filename10.5.11.pdf) but does in Adobe Standard 9.  Why?
    Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
    does in Adobe Standard 9. Why?
    created by Ankit_Jain in Adobe Reader - View the full discussion
    Hi Susan,
    Thanks for providing the information.
    Could you also let me know what is the exact version of Adobe Reader on
    your system. You can check the same y clicking on Help > About Adobe
    Reader X.
    In case its not 10.1.1, please try updating to the latest version and see
    if the problem persists.
    Also, does any other PDF with a different filename open in Internet
    Explorer correctly?
    Thanks
    Ankit
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3979020#3979020]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • ITunes could not copy ''file'' because the file could not be written

    Recently, I have been experiencing some problems with iTunes and my iPad 2. Whenever I try to sync movies into my iPad, I get the error message ''iTunes could not copy ''file'' because the file could not be written''. This message always appears whenever I try to sync a few movies at once. When I check my iPad after it's synced, I find that a few of my movies successfully sync into my iPad, and can be played. However, some movies show up on my iPad but cannot be played. The video thumbnail just shows a picture of a blank TV screen. Is there any way where I can fix this problem? Thanks.

    Hi JimmySlax.
    I was having the same issue with music and movies but it had been ok before. The sync would freeze on a random file and then i had to take out the USB cable to clear it. After trying all sorts of things i saw someone mentioning about Anti virus and firewalls. I am using McAfee so i disabled it as a test. After this i could sync music and movies without issue!!!!! So in my case the firewall/anti virus was causing a problem. McAfee updates itself a lot so I am guessing something has happened in a recent update that impacted iTunes.I am not sure if this kind of thing is also causing your problem but it sounds very familiar.
    Hope this helps.

  • I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything...  should I restore the iPad?

    iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything...  should I restore the iPad?

    Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

Maybe you are looking for