Release Strategy @ Company Code Level

Hi Guys:
We have a two plants under one compant code, when we issue PO to the vendor it consists quantities that are required for both plants ( Central purchasing org).
Release strategy for PO is at header level , I.e Total PO Value can we release strategy @ company code Level?
with Characteristics as Company Code ,PO Document Type and PO Value?
Thanks
Sweth

Hi
For example if the release strategy set at c.code level all the documents created for several plants belonging to the c.code will affect the release strategy,so that is not the purpose of release strategy,
The main purpose of release strategy is certain documents created for particular plant or particular purchasing group or more than the value need to be blocked based on your business,so you cant able to set the release at c.code level because thre is no logic.
The characteristics for release strategy for external purchasing documents are
Plant                - WERKS
Pur.group        - EKGRP
Pur.org            -EKORG
Acc.assignment category-KNTTP
Document value-GNETW
Document type-BSART
The table is CEKKO
Thanks

Similar Messages

  • MRP at company code level

    Dear Experts,
    We required MRP at Company code level.
    We have 33 plants for MRP run , While running MRP system has to consider Finish Goods stocks of all plant's location should be consider for Availiblity check
    MRP run carried with scope of planning , in this scope of planning all the
    required plants are assigned , during planning Run , the stocks at other
    plants are not consider during NET requirement calculation.
    In turn it creates the planned independent requirement directly.
    So kindly suggest where we are going wroung. 
    Thanks 
    Material with scope of planning for all required plants.
    1. material with MRP type --- PD
    2.procurement type --- F and X (since planning external )
    3.Planning strategy --10

    Don,
    We required MRP at Company code level
    SAP PP does not explicitly support this requirement.  Since each plant is owned by a single company, you can run MRP against all plants owned by a specific company.  This will at least select the right materials for processing.
    While running MRP system has to consider Finish Goods stocks of all plant's location should be consider for Availability check
    MRP is not related to availability check.  FYI, if you are actually talking about availability check, and not MRP, there is no availability check available in ECC that will check inventory across plants.
    the stocks at other plants are not consider during NET requirement calculation.
    Yes.  This is normal.
    In turn it creates the planned independent requirement directly.
    MRP does not create Planned independent requirements.
    In short, you are doing nothing wrong.  This is the way that it works.  If this is unacceptable, then you will need to create a customized solution with Enhancements or BADIs.
    Best Regards,
    DB49

  • F.01 - extract to consolidation on company code level

    Hi everyone
    We're trying to do an extract to consolidation on company code level (1). When popup dialog "Filename for extraction file" appears we can choose between presentation server or application server.
    When choosing presentation server and logical filename ECCS_FILE we get error GC027 (Error opening file c:\temp\EXTRACT_CS_CO.txt).
    Doing so choosing application server however works (whereas path isn't the same).
    We already checked and double-checked settings of logical file name and logical path in transaction FILE.
    Any suggestions what to do or isn't it supposed to work via presentation server?
    Thanks in advance and best regards to all
    Renaud

    I have not seen anything that you have mentioned to enter file path?
    Is this being customised for your Company?
    How did you download this before?

  • Addition of a field in vendor master table at company code level

    Hi Champs,
    My requirement is to add a field in LFB1 table.
    I have added the field in the table using append structure, that was fine.
    I need to add the same for input/output on the screen 215 of program SAPMF02K (for the screen of Payment transaction Accounting at company code level).
    As far as I know there are only screen enhancements for Vendor master(no screen exits). The screen enhacements are  "Prepare Modification-Free Enhancement in Vendor Master Record". But using that i need to create a subscreen, but in my requirement I need to add the field on the same screen.
    Is there any solution for that???
    Please let me know if my doubt is not clear.
    Regards,
    Nishant

    Hi Krish,
    I am not able to find the screen exit for my requirement.There is only screen enhancement for Vendor master.If you have any idea of the same pls let me know.
    I am ok with the solution that i need to change in the standard screen using access key,  but do i need to code anything in the PAI or PBO of the screen or it will be taken care automatically. Details of the program and screen is already given.
    Thanks
    Reagrds,
    Nishant

  • PO and SchdAgreem Release Strategy at Item Level

    Hello!!
    I have the request to setup a the release strategy for the PO and Schedule agreements at line item level....
    as far I know for PurReqs is possible to do that... but for PO and SAs it is only at header level...
    Do you know if is possible to do that in configuration??

    Hi,
    Release strategy for PO & SA is only at Header level, since these documents are external purchase documents.
    But, PR is internal purchase document and release strategy is possible at both item and header level.
    i think, it is not possible to do release strategy at item level for PO & SA as you said,
    Regards,
    Srinu.K

  • Where we assign Exchange rate type at company code level,

    Dear All,
    Where we assign Exchange rate type at company code level, In 0BA7 we assign by Document type wise and OB22 will assign by controlling area wise , but we are not maintain Controlling area, exactly where we assign , and how it will pick at the time of PO creation ,
    Thanks in advance
    Vijay

    Hi,
    In OB22 we assign Exchange rate type against company code and not against controlling area .
    Regards,
    Shayam

  • Manage vendor bank account in company code level - Best practice

    hi,
    we have on our client several company codes, and we are thinking how to manage the vendor bank accounts in company codes level or in centeral level.
    our problem with company codes level is that the vendor bank accounts define in a centeral level so technically with sap standard it is not possible. if anyone can tell me that this is possible i will be very happy to know.
    in centeral level our problem is with the business process because of we do not have a person (functionalism ) that can be responsible for all the company codes, basically every company shoule be responsible for her vendors
    please advice what is the best practice to manage vendor bank accounts in enviroment of several company code
    regards,
    meir

    hi Raghu,
    i know that but this is not my qusition.
    which company code will be responsible to enter the bank account in the vendor master data? as i say the vendor bank accounts manage in centeral level and not in company code level and this is our problem and i like to know how other companies with the same situation handle with this issue
    and also after we have the bank accounts in the vendor master data what happend if for one vendor has several bank accounts one for every company code? how the payment program F110 could know automaticaly which bank account to take (i know that there is an optoin to use Partner bank type in the vendor master data, and enter this PBT when posting the invoice of the vednor, but this is not good because of we do not want the the accountant will be responsible from which bank the vendor get his money).
    regards,
    meir

  • Material Ledger activation at Company Code Level

    Hi All,
    I have a requirement where Material Ledger need to be activated at Company level and not at single Plant Level. We are about to implement ML and would like to have periodic unit price calculated at company code level  (e.g. 1 material, 4 plants, 1 company = 1 periodic unit price).
    I went through the customization , it only refers to Plant level (Valuation area level)
    Could anybody throw light on this.
    Regards
    Barbara

    Hi,
    What is the valuation level?
    If the valuation is at plant level you can maintain different views at different plants of these company codes.
    If only name is different i think you would do better with the same material code, and if you still want to differentiate please create two different materials
    Regards,
    Prithviraj
    Edited by: Prithviraj Talekar on Feb 11, 2009 5:25 AM

  • Customer-based BP role, Company Code level data

    System ECC 5.0.
    May be somebody can help me in a problem with Company code level data for BP.
    I'm trying to create new BP in custom Z role (created by me), on company code data screen I cannot set "Company Code Is Valid for Customer" indicator on company code selection dialog box.
    I use custom Z role with assigned custom Z rolecategory (with active BP-customer syncronizaton), It seems that there is a missing setting in SPRO for rolecategory that activate possibility to enter company code data.....

    After some investigation.... the problem was not in customising, but in some requirements from code: BP role should have the same name as s BP rolecategory. After renaming it goes.

  • Budgeting at the company code level

    Hi Experts,
    My client is in Sales and Distribtuion company and they are having sales budget and procurement budget along with financial budget at the company code level down to the branches.And also they will budgeted the advertisement and sales promotion expenses based on sales value and quantity.
    And we are not using any Treasury and Cash Management,Fund Management modules but client is asking the above requirement so How we can do the same ?
    Guide me in this and I will award you the points.

    Ok

  • Material valuation at company code level

    Hi,
    We have the valuation at company code level and when we transfer material from one plant to another (Two step stock transfer) the system dont post  fi document. When the profit center of the material is assign an fi document is posted. Somebody knows why?
    Thanks
    Edited by: Elisabete Cuellar on Jul 27, 2010 11:56 AM

    you have valuation at company code level.
    both plants are in same company code, so same valuation level, so no FI document created , the FI docuement not required here
    For profit center, FI document will be ceated for that profit center.
    This is standard process only

  • SAP ISU- Can you help on Invoice Rounding steps at company code level,

    Dear Friends,
    Can you help on SAP ISU Invoice Rounding steps at company code level,
    Client requirement is: - for one company code they need round the Invoice and other company codes they does not required the round option.
    We have configured some steps, which are given below,
    Contract Accounts Receivable and Payable - Basic Functions - Postings and Documents
    1.     Define Rounding Rules for Currencies
    2.     Define Accounts for Rounding Differences
    3.     Accounts for Rounding Gross Amounts (IS-U)
    4.     IS-U: Define Acct Assignment Data Relevant to Transactions
    a.     (Main Transaction 0010 and Sub Transaction 0040)
    SAP Utilities u2013 Invoicing
    1.     Define Basic Settings for Invoicing
    2.     Define Invoice Rounding Rules
    Please provide the solution; I will be appreciating for earliest answer...
    Thanks and Regards,
    Prudhvi

    Hello Christiane,
    Thanks for your quick reply, and valuable information,
    But we have u201CNo roundingu201D option available at client level, path has given below, 
    SPRO u2013 SAP Utilities Invoicing u2013 Basic setting u2013 Define Basic setting for invoicing
    We are not authorized to change any configuration at client level,
    If you can able to guide me at company code level that could be great,
    Thanks for the support
    Thanks and Regards,
    Prudhvi

  • Payment block non editable on the basis of company code level

    Dear Gurus,
    we had made payment block "A" non editable in payment praposal through transaction code ob27.as per reqeust from
    our partent company in India but our subsidiary in France wants the payment block "a"  to be editable (to be insert
    payment block "a" in document to make document deselect). Is it possible to make payment block editable on the basis of
    company code level.
    Regards,
    Rajesh

    Hi,
    In this scenario, you need to have a NEW Payment block key like Z. Create Z with reference to A in OB27.
    For Z, you need to select check box Change in Payment Proposal and SAVE.
    Now maintain this Z in vendor masters of company code, where you want the payment block can be edited.
    Note: Payment Block codes are not company code dependent.
    Regards,
    SRinu

  • OKP1 - period lock on company code level

    Hi all,
    I wonder if anybody can help me with this issue.
    Is there an alternative transaction (or any other way) to OKP1 for locking period only on company code level?
    In standard, OKP1 locks on controlling area level.
    The only way which comes on my mind is to set a new validation rule.
    Thanks a lot
    Regards
    Peter

    Hello Peter,
    we are very interested in this issue.
    For our project we also plan to have an assignment from 7 company codes to one controlling area and we also want to control the closing by company code.
    Now we read your thread about this issue and try to work out how you have designed the validation step (OKC7) to check if one business transaction is only allowed for postings in a single/specific company code at the time.
    We are looking forward to your reply!!
    Kind regards
    Udo

  • Blocking Vendors on Company Code level

    Hi,
    Our Purchasing Organization has multiple Company Codes. Is it possible to block certain vendors for a Particular company code without affecting the other company codes which might be using that vendor??
    What exactly we are trying to do is block all future Purchase orders & Requisitions from being created for a list of Vendors for one company code. We do not want it to affect other Company codes within the same Purchasing Org which might be using the same suppliers.
    I know about XK05 but I think it puts a "Purchasing block" at the Purchasing Org level only and not on the Company code level. Is there any way to achieve this??
    Your inputs are really appreciated.

    Hi Martin,
    If you want to Block the Vendor for a Particular Purchase Organization and Company code then Go to XK05 and Select Vendor Pur Org and Comp Code and in Posting Block tab Activate for Selected Company code and in Purchasing Block tab Activate for Selected Purchase Organization and Save.
    Before this you need to set the following to Error.
    SPRO-MM-Purchasing-Environment data-Define attributes for System messages
    ME 023 Vendor & blocked for purchasing organization &
    ME 024 Vendor & flagged for deletion
    ME 025 Vendor & flagged for deletion for purchasing organization &
    For XK05 Message ME 023 would work.
    Regards,
    Nani.

Maybe you are looking for