Releasing Mass Change Worklist-Error Message No Administrator for this task

Using transaction AR01 we create a Worklist and assign it to the Substitution Rule. When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message. "No Administrator for this task". We've tried a user id with SAPALL and still get this error message.
Does anyone know what this means and how we can get around this message?

We have this working in our Test system without having to set up any workflow tasks for Fixed Assets. I'm wondering if this has to do with the Productive client settings. We had to make some changes so that we could use transaction OA02 in a Productive client.
Any suggestions would be greatly appreciated.

Similar Messages

Workflow message - No administrator for this task

Hello:
I got message " No administrator found for this task" when I double click workflow e-mail.
Please advise.

Hello,
If you execute a work item (And finish execution) then this work item
should no longer be in your inbox (Unless it is an asynchronous task
and it hasn't received its terminating event yet) and you should not
the option to Repleace. If it is an asynchronopus work item and
is still in your inbox and you try to reaplace then the message
5W 141 is correct.
Also check SAP note 1103387.
Regards,
David

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

Hi,
One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
isn't enough memory to complete this action. Try using less data or closing other applications."

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
Did you using Excel 2013 32bit version and Excel 2010 64bit version?
General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
Here is a similar issue, we also could try it:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Basic 64
How is your product connected to your PC? : Network
Problem description : In Device Manager I've got an error message with the
Officejet pro 8600 icon - "The drivers for this device are not installed.
(Code 28)
There is no driver selected for the device information set or element." I
have uninstalled and re-installed the driver to no effect. The printer
appears to be functioning properly.
This question was solved.
View Solution.

Hello,
Yes, i too would suggest a clean re-installation of the software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

OSX error message - the software for this printer is currently unavailable

OSX error message when loading driver for photosmart 7520 - "the software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software."

I searched the web for you and found this.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=51994...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

When you update you iOS, have you seen this error message: not eligible for this build? The serial

Dear Mr. Jobs,
My husband has been an avid supporter of Apple, having purchased a great deal from you over the past many years. Personally, I have been an iPhone user since it was introduced a few years ago.
In July 2010, I stood in line at the Apple Store in the Stanford Shopping Center to purchase the iPhone 4. In February of this year, I tried to update the iPhone and got the 'sign of death'. My iPhone turned into a piece of brick and I was not able to make any phone calls, which at that time, was very inconvenient. I remember having to coordinate a pick up at the airport early the next morning and my phone was dead. Apparently, in trying to update the phone, it corrupted the firmware and I could no longer activate that phone. It was a frustrating experience on the eve that I had to go to the airport and I spent hours trying to see if there is anything that I could do to get the phone back in working order.
The following day, I made an appointment with the genius and my husband and I took the iPhone to the Stanford Apple Store to see if there was a problem with the phone. Without hesitation, we were asked if we purchased the phone overseas. Of course, as Asians, they probably thought that we purchased it in the black market in China. After hearing our response, their next question was whether we hacked the phone. Why would they bring up these issues? Rather than immediately delving into the problem, we found it very annoying that the employees would tried to divert Apple's problem to us. After trying to diagnose the problem, they gave us a new phone and activated it using their in-store computer.
We took the phone home, thinking that the problem had been solved. When we got home, we tried to update the iPhone to no avail. The firmware was corrupted and we had to once again, bring the phone back to the Apple Store in the Oakridge Mall in San Jose. The Apple employee told my husband to go to the AT&T store, as there was potentially a SIM problem. My husband went to the AT&T Store and was told that they couldn't help him, as the SIM was fine. They did, however, replace the SIM so that there would be no issue.
In April, when there was an upgrade to the iPhone software, we once again tried to update the software and was unable to. Once again, the firmware was corrupted and we were forced to take the phone back to the Stanford store. Again, they asked us if we purchased the phone overseas. Why? They could have easily looked at the records, but no, your records are so bad that you are unable to pull it up. That afternoon, we spent four hours at the store, updating the OS on the computer as well as updating the iPhone. They assured us that they solved the problem.
This past weekend, as there was another update to the iPhone software, we were once again unable to update it and were forced to take it back to Apple. Again, we were asked, did you buy the phone overseas. It's very frustrating and annoying to repeatedly get asked that question. After a series of back and forth communications between the genius and my husband, we were told that they didn't know what the problem was. This time, we told them that we would not be leaving the store until they solved the problem. We have an Apple computer and an Apple iPhone, so 'Apple' should find the source of the problem and fix it once and for all. The genius then suggested that we migrate the data from my computer to my husband's computer and try to update the phone using my husband's computer. We didn't accept that answer.
Our genius then asked the help of a second genius and after taking his suggestion, they found that the serial number for my iPhone had been assigned to France Telecom. Once again, they asked if we bought the phone overseas. Why? Please train your employees to not accuse the customers of doing this. Many of us are honest and we take offense to this. In fact, we told them that we purchased the phone from the Stanford Store (where we were at). After looking for the record, they said that we must not have purchased it from them. The onus, then, was up to us to prove that the phone was, in fact, purchased from the Stanford Store. Fortunately, my husband saved the email and was able to show the genius that the phone was purchased from them. How could your records be so poor as not to be able to find our purchase?
After two hours at the store, we were told that we, not Apple Stanford, had to call customer care to resolve the problem. Being that this is an Apple problem, I would have expected Apple to follow up on our behalf. Why is it that the customer has to spend additional time to deal with an issue that was caused by Apple.
My husband has been dealing with customer care, who apparently has escalated the problem to other divisions within the organization. It's been two days and the problem still has not been resolved. In fact, the answer remains that they are not sure how to resolve the problem. Why can't you update your system and redo the record so that I can go on in peace. Every time I try to update the software, I'm afraid that I won't have a working phone. Do you blame me?
This has been one of the worst experiences that I have had with an Apple product and it still is not over. Collectively, my husband and I have spent over 25 hours dealing with this issue both at home and at various Apple Stores. It has been a hassle having to go from place to place, having to sync the phone multiple times, having to update the software multiple times on both the computer and iPhone and ultimately, not having it fixed once and for all. Please let me know how you expect to compensate us for this experience and how and when you expect to fix my iPhone issues.
Mr. Jobs, I know that you expect perfection from your team. This has been a tremendous waste of time for my husband and me and has been a less than stellar experience.
Regards,
Lea Anne Ng

With that one, I'd check on your Hosts file on your PC, Lea.
Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".

Error message "the certificate for this server is invalid"

unable to connect to itunes or app store

Go to Settings>General>Date and Time>Set automatically>On. If it is set to on, turn it off, then turn it on again and go back and try to update or download your apps or music again.

How to change the error message Invalid login credentials

Hi all,
How to change the default error messages .
1) In the Login page while giving wrong username or password .It showing
Error message "Invalid login credentials".
But requirement is change the above error message.
2) I need to change the error message instead of "1 error has occureed"
Thanks in Advance
Sudhakar

On the Login Page of the application create a 'Before Header' process with this code if apex_application.g_notification ='Invalid Login Credentials' then
apex_application.g_notification :='Your Altered Failed Login Message Here';
end if;varad

Changing the error message

Hi,
 
 How do I change the error message generated for a function such as an expired login.
 
 <?php echo $tNGs->getErrorMsg(); ?>
 
 Thanks
 
 Laurence

Hi Laurence,
ADDT´s error messages are spread across all those XYZ.res.php files located in the includes/resources folder -- and in your case it seems to be the file "tNG_pro.res.php" which provides the error messages related to the login.
In here you´ll find two message variants : one for ADDT´s "development" mode, and the other for the "production" mode. As you most likely will not need to edit the "development mode" messages which are identified by a trailing "_D" in the variable name
(e.g. BADWORDS_SQL_ERROR_D), you´ll just need to adapt the "production mode" messages
(e.g. BADWORDS_SQL_ERROR)
Cheers
Günter Schenk
Adobe Community Expert, Dreamweaver

Programatically change the error message thrown by ADF Method validator

Can I change an error message being displayed by an ADF Method Validator?
The message of the method validator can be specified declaratively using the Wizard. But is there anyway I can programatically change it inside the body of the method validator?
Inside a method validator i will check for about 5 conditions and each condition will have a separate error message to reflect the error correctly. I can't use a single message declared by the wizard.
regards,
Anton

Hi,
I think you should look at the follow links, hope they can
help you
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
#Troubleshooting a 404.13 issue using IIS and Failed Request Tracing logs
http://blogs.msdn.com/b/amb/archive/2012/10/10/troubleshooting-a-404-13-issue-using-iis-and-failed-request-tracing-logs.aspx

I cannot utilize my Adobe documents - I get this error message - "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for h

I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”

Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.

Changing CAT2 Error Messages

Hi,
I'm looking to change the error messages displayed from CAT2 when an error is encountered on the timesheet screen. e.g. "System Status AALK is active"
Is this possible? If so, where can I find the messages?
Thanks,

https://discussions.apple.com/thread/4749177?start=0&tstart=0
Selecting all photos and then starting to drag and drop but dropping back into place created a pop-up alert for each file which was causing the problem. Fortunately, I did not need these files, so I was able to delete them and the problem appears to be corrected.

Change default error messages

Hello..
I want to change the default error message in apex. for example I wanna change the Not-Null default error message so instead of "Field1 must have some value" I wanna get "Field1 must not be null".
Thanks

Hi Patrick,
It’s an interesting reply, especially as the OP marked it as correct, but still I’m trying to understand something.
As far as I can tell, you can use the translation system only for messages that was defined under a different language from the application primary language. For example, if you are working in English, and you are defining new text messages under English, with new text content, the Application Builder will ignore them as long as your application language is English (i.e. you can’t change/edit the internally used messages of your primary language). So, is this particular text message different?
Thanks,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Releasing Mass Change Worklist-Error Message No Administrator for this task

Similar Messages

Maybe you are looking for