Change default error messages

Hello..
I want to change the default error message in apex. for example I wanna change the Not-Null default error message so instead of "Field1 must have some value" I wanna get "Field1 must not be null".
Thanks

Hi Patrick,
It’s an interesting reply, especially as the OP marked it as correct, but still I’m trying to understand something.
As far as I can tell, you can use the translation system only for messages that was defined under a different language from the application primary language. For example, if you are working in English, and you are defining new text messages under English, with new text content, the Application Builder will ignore them as long as your application language is English (i.e. you can’t change/edit the internally used messages of your primary language). So, is this particular text message different?
Thanks,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Similar Messages

How to change the error message Invalid login credentials

Hi all,
How to change the default error messages .
1) In the Login page while giving wrong username or password .It showing
Error message "Invalid login credentials".
But requirement is change the above error message.
2) I need to change the error message instead of "1 error has occureed"
Thanks in Advance
Sudhakar

On the Login Page of the application create a 'Before Header' process with this code if apex_application.g_notification ='Invalid Login Credentials' then
apex_application.g_notification :='Your Altered Failed Login Message Here';
end if;varad

Default error message

1. Is there an administrator setting that can make the path and name of the referring template be left out in a default error message but still be recorded in application.log?
2. If the answer to 1. is yes, does the ColdFusion service need to be turned off and back on for it to take effect?
3. Is cferror with type of request or exception as good as usiing cfcatch/try blocks?
Thank you very much.

1. Yes. The referrer of a page is CGI.HTTP_Referer. The administrator allows you to switch off CGI variables from the debugging output. The settings are under Debugging & Logging => Debug Output Settings. You simply have to uncheck the CGI checkbox.
2. No, you don't have to restart Coldfusion. Just press the button to submit the changes.
3. Cferror is just as good as cfcatch/try. However, cferror is suited to site-wide error-handling, whereas try-catch is suited for error-handling within a block of code or page.

Changing the error message

Hi,
 
 How do I change the error message generated for a function such as an expired login.
 
 <?php echo $tNGs->getErrorMsg(); ?>
 
 Thanks
 
 Laurence

Hi Laurence,
ADDT´s error messages are spread across all those XYZ.res.php files located in the includes/resources folder -- and in your case it seems to be the file "tNG_pro.res.php" which provides the error messages related to the login.
In here you´ll find two message variants : one for ADDT´s "development" mode, and the other for the "production" mode. As you most likely will not need to edit the "development mode" messages which are identified by a trailing "_D" in the variable name
(e.g. BADWORDS_SQL_ERROR_D), you´ll just need to adapt the "production mode" messages
(e.g. BADWORDS_SQL_ERROR)
Cheers
Günter Schenk
Adobe Community Expert, Dreamweaver

How i can display default error message in alert window

how i can display default error message in alert window
i.e.,
i have a text field with datatype Alpha
if i am giving numbers.etc then it is displaying
FRM-50001: Acceptable characters are a-z,A-z and space
I want to display this message in alert window
please tell how to do this

In the on-error trigger :
Capture error_code and error_text in a variable.
Set the alert title to something meaningful.
Set the alert message equal to the captured error information.
Display the alert.
declare
v_alert varchar2(100) := 'ERROR' ; -- name of alert to use
v_title varchar2(100) := 'Error !' ; -- text to display as title
v_msg varchar2(200) := error_code || ':' || error_text; -- message to display
v_btn number ; -- button pressed
begin
set_alert_property( v_alert, TITLE, v_title );
set_alert_property( v_alert, ALERT_MESSAGE_TEXT, v_msg );
v_btn := show_alert( v_alert );
end;
----------

Programatically change the error message thrown by ADF Method validator

Can I change an error message being displayed by an ADF Method Validator?
The message of the method validator can be specified declaratively using the Wizard. But is there anyway I can programatically change it inside the body of the method validator?
Inside a method validator i will check for about 5 conditions and each condition will have a separate error message to reflect the error correctly. I can't use a single message declared by the wizard.
regards,
Anton

Hi,
I think you should look at the follow links, hope they can
help you
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
#Troubleshooting a 404.13 issue using IIS and Failed Request Tracing logs
http://blogs.msdn.com/b/amb/archive/2012/10/10/troubleshooting-a-404-13-issue-using-iis-and-failed-request-tracing-logs.aspx

Override Default Error Messages

Hi,
We are using ADF components and want to override the default error handling mechanism. The requirement to be precise, whenever we validate an input text for mandatory, we get the default error message which shows us a cross, displays "Error: A value is required" and then our message which we specified in the requiredMessageDetail. Our requirement is that on validation the system should display only our message, both on the <af:message and <af:messages level.
Can someone please suggest a way of ovveriding the default behaviour of ADF Errors.
Thanks and Regards,
Lilly

hi all,
I got the solution for this
please refer the link below
Customize ADF component Skin
thanks
dhiraj

Changing CAT2 Error Messages

Hi,
I'm looking to change the error messages displayed from CAT2 when an error is encountered on the timesheet screen. e.g. "System Status AALK is active"
Is this possible? If so, where can I find the messages?
Thanks,

https://discussions.apple.com/thread/4749177?start=0&tstart=0
Selecting all photos and then starting to drag and drop but dropping back into place created a pop-up alert for each file which was causing the problem. Fortunately, I did not need these files, so I was able to delete them and the problem appears to be corrected.

Permanently change default error configuration in Analysis Services 2005

Hi,
Currently, I am working on a BPC 5.1 application. The data for this application is loaded(inserted via SQL statement) right to the FACT table and then a full process is run for that cube via an SSIS package using the Analysis Services Processing Task. Often records are loaded this way where a dimension member for some of the records has not been added to the Account dimension yet. These records after loading are considered 'orphan records' until the accounts are added to the account dimension.
This loading process is used because of the volume of records loaded(over 2 million at a time) and the timing of the company's business process. They will receive data sometimes weeks before the account dimension is updated in BPC with the new dimension members.
If I try and process the application from the BPC Administration area with these orphan records in the FACT table, the processing stops and an error displays. Then when I process the cube from Analysis services, an error is displayed telling me that orphan data was found.
A temporary work-around is to go into the cube properties in Analysis Services 2005, click on Error Configuration, uncheck 'Use default error configuration' and select 'Ignore errors'. Then you can process the application from BPC's Administration page successfully. But, the problem is that after processing the application successfully, the Analysis Services Error Configuration automatically switches back from 'Ignore errors' to 'Use default error configuration'.
Does anyone have any suggestions on how to permanently keep the 'Ignore errors' configuration selected so it does not automatically switch back to 'Use default error configuration'? Prior to BPC 5.0 this was not occurring.
Also, does anyone know why this was changed in BPC 5.0/5.1?
Thanks,
Glenn

Hi Glenn,
I understood the problem but I can say that it was a bad migration of appset from 4.2 to 5.0.
Any way they are using a dts package to import data into our fact table. That's means they have to add another step into that package where they have to do the verfications of records before to insert into fact table. Verfications can be done using the same mechanism from our standard import. Just edit that package and add similar steps into customer package.
Attention you need somebody with experience developing DTS packages with for BPC to avoid other problems.
One of big benefits from 5.X compare with 4.2 was the fact that we are able to use optimization schema and aggregations for cubes.
Heaving that orphan records it is not possible to use optimization schema for cubes and you are not able to create good aggregation into your cube.
So my idea is to provide all these information to customer and to try to modify that package instead to enable that option which can cause many other issues.
Sorin

Change of error message into warning message

While doing FBZP i have found the following error.
Clearing acct only allowed for an outgoing bill of exch.pmnt
Message no. F3029
I am not able to go further, the above message is coming.
I want to make the error message into warning message.
Please suggest, how to overcome

Hello BSR,
The Error message F3029 is raised when the clearing account (T042I-VKONT) is filled but the payment method in question is not defined as "Bill/exchange".
I assume that the field is not changable at the moment. You may make necessary changes (delete the entry or delete the specified account) with the instructions below.
1. Go to Tcd: FBZP -> Click [Pmt methods in country]
2. Select the entry for the erroneous country(?)/payment method
3. Change Payment method classification to 'Bill/ex' and save
Now you should be able to change "Set Up Bank Determination for Payment
Transactions" table.
If you still want to use this payment method, please change back to the original classification after making necessary changes in T042I.
I believe this information would help you in resolving the reported issue.
Best Regards,
Vanessa Barth.

How to change java error message in transaction page?

Hi experts,
I want to ask, how to change ess critical error message to a user friendly message?
the message appear because of user exit that we used on the back end.
so here's the case:
we use user exit of travel management to check end date of trip maximum is 2week from now.
the user exit run correctly,
but, the problem is it(error message) is appear in a new page. (and we can't undo or go back to the transaction page)
how to make it appear in the transaction page? so the employee could easily change the date without input the transaction again from beginning?
thanks.

here is the error
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
, error key: RFC_ERROR_SYSTEM_FAILURE
this error come from user exit.
i made validation for employee that they can't make travel request and expense more than 2 weeks (the end date)

Releasing Mass Change Worklist-Error Message No Administrator for this task

Using transaction AR01 we create a Worklist and assign it to the Substitution Rule. When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message. "No Administrator for this task". We've tried a user id with SAPALL and still get this error message.
Does anyone know what this means and how we can get around this message?

We have this working in our Test system without having to set up any workflow tasks for Fixed Assets. I'm wondering if this has to do with the Productive client settings. We had to make some changes so that we could use transaction OA02 in a Productive client.
Any suggestions would be greatly appreciated.

Change B2B error message: "Error in R/3 system: document cannot be sent"

Hi experts!!
I had the requirement the B2B user not to be able to change orders from the past days.
I wrote some ABAP code in MV45AFZZ user exit and the functionality works fine! I even receive my custom error message in the B2B but before my message i also get "Error in R/3 system: document cannot be sent. Call our hotline.."
Is there anyway i can change this standard message in JAVA side???
Thank you in advance!!

In the ABAP side, set break point in BAPI_SALESORDER_SIMULATE and check the BAPIRETURN table.. Depending upon the stage and action on the order, the other RFCs you might focus on are SD_SALESDOCUMENT_CREATE or SD_SALESDOCUMENT_CHANGE. The return structure is BAPIRET2 for this set of RFC.
You might remove the "unwanted messages here.. or let them flow into the Java layer and tackle them there. That will require you to extend different xxxxStrategyR3 classes and overwrite certain methods in certain classes. The development is NOT streamlined here.
Read the classes CreateStrategyR3 - there is a method performCustExitAfterR3SimulateCall
in ReadStrategyR3 - there is a method called replaceR3MessageTexts and in change..
in ChangeStrategyR3 - there is a method called performCustExitAfterR3Call
In all these places you have to read the appropriate table that contains the message and remove it. See ReadStrategyR3~replaceR3MessageTexts for some idea..

Changing the Error message in the background

Hi Experts,
Is there any way to catch the Error message in the background apart from changing the message type.
Because the error message is coming from a standard function and I want my program should handle the error message. Whether this can be possible if possible can anyone please let me know the process.
Thanks in advance.
Regards,
Srinivas
Edited by: Srinivas Hari on Jun 23, 2009 10:08 AM

Hi Srini,
The question is not very clear still I am trying to answer this.
If my understanding is correct you are trying to run a standard function module in background task in your custom program and that FM is giving some error messages but not raising any exceptions and you are trying to catch those exceptions in your program. If that is be the case then yes you can definitely catch that error messages.
Step 1 : Call function 'XXXX' IN BACKGROUND TASK
Step 2: Call function 'ID_OF_BACKGROUNDTASK'
Step 3: COMMIT WORK and WAIT.
Step 4: Call function 'STATUS_OF_BACKGROUNDTASK' ---> passing the id number which you will receive in Stpe 2.
Basically the step 4 would return you the error messages which would be visible in Transaction SM58.
Regs,
Somnath

Colo change on Error Message

Hello,
somewhere I have seen an example how to change the color of an label if an error message is there.
Knows someone about this?
Thanke,
ThomasW.

Not that I know of. You have no control over the standard validator.
The solution I offered you is not exactly a custom validator. A custom validator is a class that implements Validator (and, when required, the StateHolder).
I don't know what your requirements are but if you want to control a Label's color based on validation, I don't know any other ways.
An easier way to tell the user an error occured on a certain field, is to add a message close to the field in question. If you opt for that, then you can do it with the standard validators like this:
<h:message for="yearOfBirth" styleClass="error"/>
The "for" attribute identify the component ID for whom you want the error message(s) displayed.
Then, it's just a matter of adding the message(s) in JSF context...
this.getFacesContext().addMessage(clientId, new FacesMessage(message));
Look at the APIs for FacesMessage for more details on how to add a global or specific message for a given component id (clientId).
Cheers

Change default error messages

Similar Messages

Maybe you are looking for