Remote Debug - .SDA File or Adapter

I have configured PCK Server and deployed sample Adapter. I have enabled debug mode on server to debug java code on NWDS.
.SDA file consists of .rar and inturnally consists of .jar file (JAva Application). I have manually build .rar from NWDS JAva Application generated .jar file, and also manually generated .sda file. These file generations are 100% successful and deployed 100% Successful.
Now I want to debug java code enabling remote debug, however, after I attached to remote server, it is not kicking java code even I put any breakpoints.
Server environment is on SAP PI 7.0 PCK Environment.
NOTE: You get double points for right answer with my subscription.

Hi Ravi,
Could you tell me how did you achieve this? I am trying to do the same.
VJ

Similar Messages

How to debug .sda files

Hi Guys,
Could anyone tell how to debug the .SDA files.I mean i couldn't found any option to deploy .sda files that i have built through ANT builder in NDS.Till now i am deploying it through SDM only.Is it possible to debug the .SDA files which i am deploying through SDM and debug them through NDS.
Actually i am trying to debug the Sample Adapter of SAP XI.
regards,
Gowtham K.

Hi Heiko,
>>>have you tried to start your J2EE engine in debug mode and attached to your server using the debug perspecive and JPDA?
Yes, i have started J2EE engine in debug mode and from NWDS i kept that application in debug mode.
But the problem is i am not deploying my .SDA file through NDS.I can only deploy it through SDM on J2EE server.But the same SDA file i have imported into NDS and set it to debug. But it is not getting debug. Can i deploy .SDA file through NDS.
regards,
Gowtham K.

Remote debugging information file out of date

I am unable to remotely debug a project. I get "The debugging information file for this file is out of date".
This is very strange because the project resides on the remote computer and I am working on it as a network share. I had it working yesterday, but not today.
I assume that I have the 2 system configured properly since I am getting this error on my development system when I launch the program on the remote system. I am connecting remotely with TeamViewer 10.
CVi 2012 SP1.

Mjl,
Have you made changes to what you are trying to debug since yesterday? I would make sure that the application versions match for both computers you are using.
Also, are you following this link to debug your project?
http://www.ni.com/tutorial/3384/en/
Matt J
Professional Googler and Kudo Addict
National Instruments

Remote debug a Flash file running inside an application

Hello everyone.
I'm an application developer, and my standard usage of Flash is as follows:
I'm creating an executable application, which contains a ShockwaveFlash object instance, which in turn is displaying a Flash Movie Clip - also created by myself. The executable application and the contained Flash clip are communicating via the ActionScript ExternalInterface (using XML strings) and the FSCommand.
I'd like to be able to debug the ActionScript code of the Flash file while I'm running/debugging my executable application. For that, I need to be able to start a remote debugging session from the Flash object running inside my executable. Problem is, I did not find any way of doing this.
When I publish the Flash SWF file with "permit debugging" checked, I'm able to start a remote debugging session when I'm displaying the file in a player or a browser (the "debugging" option is shown at the right-click menu of the Flash object), but I'm not able to do the same with the object inside my executable (the "debugging" option doesn't exist on the menu).
Environment Details:
The executable application is using the ShockwaveFlash COM file to create the ShockwaveFlash object.
The executable application is created using VB.NET, Visual Studio 2008, .NET 3.5.
The Flash SWF file is created using Adobe Flash Professional CS4.
I'm developing under Windows XP (SP3).
Any bits of information will be much appreciated!
M.A. Hanin

I'm not sure how to do specifically what you are looking for (if possible at all.....)
But, I recommend checking out deMonsterDebugger. It is an AIR application with some classes for use. You simply import the classes into your Flash project, instantiate a debugger object, and then compile.
If you open the AIR application when the SWF is running (locally, in a browser, and I imagine in another application) the AIR application serves as a debugging engine, similar to the in-Flash debugging.
There is a bit more to it than that, but I think that this is your best bet for what you are looking for.
http://demonsterdebugger.com/

How to create SDA file for using AXIS Framework in the SOAP Adapter

Hi experts,
I have the following question:
How I can create the SDA file aii_af_axisprovider.sda for using the AXIS Framework in the SOAP Adpater described in http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm ?
I have downloaded the files axis.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, commons-net-1.0.0-dev.jar and wsdl4j-1.5.1.jar. But how to create the SDA file aii_af_axisprovider.sda? Which tool I have to use for this? It is enough to compress these 5 jar-files in the sda file or need I further files with further information (meta information etc.)?
Thanks and best regards
Christopher

Hi Christopher,
Check this discussion if you have not checked already.
Re: NTLM Authentication dosent work with XI ?
Regards,
Ravi

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

How to extract SDA file..........

Hi All
how do we extract SDA files.......
we started adapter development by testing sample code in 'sample_ra.jar' file, available in sample_ra.sda, and deployed on XI server. now we want to see all jar files available in 'sample_ra.sda'.
if any one already gone through adapter development have any idea, how to extract SDA file, help me out Pls .......... very urgent.
Regards
Rajesh

HI,
In general SDA files are to be deployed into Server using SDM.
see the below link , how to deploy
http://help.sap.com/saphelp_webas630/helpdata/en/05/4fac3e00c8b014e10000000a114084/content.htm
Also
you can unzip the file with WinZip or WinRar edit the xml configuration file and zip it back together (in ZIP format and not RAR!).
Also
how to deploy ear files from command line
Tools like zipgenius http://www.zipgenius.it/intweb/features.htm#Innovazione, Private encryptor http://www.filesweb.com/private-encryptor/ and securefile http://www.devsolutions.net/htmlpages/securefile.html should help you further.
Regards
Chilla

Advantages of using Oracle JVM over JPDA for Remote Debugging?

What are the "additional features" that the documentation hints at when using the Oracle JVM for remote debugging vs. the JPDA protocoL? Can a member of the JDEV briefly address this? What exactly am I losing when using JPDA?

I am not getting anywhere with 'NCOMPing' the stuff. Attempts to NCOMP keeps erroring out . The first of the errors is
'Error while determining classes contained in jsch-1.29_minimalClassListAndTCD
mper.java
Exception oracle.aurora.sqljdecl.ParseException: Encountered "-" at line 14
column 18.
Was expecting one of:
"extends" ...
"implements" ...
The following operations failed
jsch-0.1.29_minimalClassListAndTCDumper.java: creation
exiting : Failures occurred during processing
Kuassi, I have looked at a few of your posts where you make mention of a file titled 'Settings_os.properties'. I see no such file in my Oracle installation. What am I missing here ?

Unable to see any SDA file in inbox of JSPM

Hi Experts,
I am deploying MQ series JMS drivers into PI 7.1 system, i added the drivers to com.sap.aii.adapter.lib.sda archive file and i changed provider.xml and i place the file in JSPM inbox directory (Drive:\usr\sap\trans\EPS\in). but when i try to deploy using JSPM, JSPM is not identifying the SDA file. i am getting the following error in JSPM
"No applicable development components found for deployment in inbox directory"
Can anyone help me what could be the problem.
Thanks,
Rachana

Hi there,
Create SCA files for standard deployment and shipment to customers.
The Java SP manager (JSPM) can only process SCA files and not RAR files.
The SAP NetWeaver migration controller only accepts SCA files.
This is relevant if you have already shipped an adapter with a previous release.
For your reference in how to create them, please check:
http://help.sap.com/saphelp_nw70/helpdata/en/9d/5dbbec61c448298d804b1d3aeabd25/frameset.htm
and
https://cw.sdn.sap.com/cw/docs/DOC-110532
Regards,
Caio Cagnani

Remote Debug in eclipse

Hello!
I am new to eclipse...Can someone tell me how to use remote debug? I thought it is done by running "Debug..." after selecting the java file...Sorry for being so ignorant about this...I will really appreciate your help. Thank you.

You do not have to have a main() method in the application. In fact you can have a breakpoint in any Java component. It just has to be in debugger's scope and it'll get visited.
Example: Let's say you're rinning a Tomcat app. You can have a breakpoint inside a servlet's doGet() methof and when you invkoke the servlet from Firefox, Eclipse will pause the excution and will bring the debugger perspective up.
From the article "Eclipse Debug window should automatically pop-up with the stack pointer on your first breakpoint (See Figure 3: Breakpoint hit in Eclipse's debugger). After that, you can use all the various functions that the debugger has to offer, namely variable assignments, step-into, drop to frame, etc."
If you're not seeining anything, chances are that you're not executing that piece of code. Double check that and let me know.
Levent Gurses

Remote Debugging (Jdev 10.1.3 to AS 10.1.3)

Hi,
I have been trying to do a remote debugging by connecting Jdeveloper (version 10.1.3 production) to AS 10.1.3 mid-tier but the OC4J instance seems to be crashing the moment the jdeveloper makes the connection. However, before the crash, jdeveloper takes about 5minutes to connect to the server.
The OC4J is managed by opmn and not a standalone process. I am not sure if this makes any difference. Here are the changes that I made in the 10.1.3 server:
*) Modified opmn.xml to add the below:
<data id="java-options" value="-server -verbose:gc -Xmx512M -Xms128M -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=43503 -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
(also tried removing "-server" option)
*) Modified orion-web.xml to add the below:
<init-param>
<param-name>debug_mode</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>emit_debuginfo</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>jspjavacompiler</param-name>
<param-value>oracle.jdevimpl.jsp.JspOjcCompiler</param-value>
</init-param>
*) Modified global-web-application.xml to add the below:
<orion-web-app
jsp-cache-directory="./persistence"
servlet-webdir="/servlet"
development="true" >
I see the below message in the jdeveloper debug window when the OC4J instance crashes:
Debuggee process virtual machine is Java HotSpot(TM) Server VM.
Debuggee process is application server OC4J.
To test JSPs or servlets, you must start a browser.
Debugger disconnected from remote process.
I do not see any error in application.log file.
By setting up the remote debugging, I am hoping for a better portlet development experience.
Any help is appreciated.
Thanks,
Pandian.
Message was edited by:
apandian

The doc is kind of vague, but here's the root reference:
http://download.oracle.com/docs/cd/B25221_04/core.1013/b15976/opmnxml.htm#sthref144
There's a FAQ document that prescribes how the "restart" algorithm works, see 1.3:
http://www.oracle.com/technology/products/ias/ohs/htdocs/opmn-1013-faq.pdf
So to tweak this behaviour, you specify a speciifc <ping> element inside of the opmn.xml for the managed process you are using -- and set the timeout, interval, retry attributes to some combination that gives you a longer pause time.
http://download.oracle.com/docs/cd/B25221_04/core.1013/b15976/common.htm#CACGAIGH
         <ias-component id="default_group">
            <process-type id="home" module-id="OC4J" status="enabled">
               <module-data>
                  <category id="start-parameters">
                     <data id="java-options" value="-Xrs -server -XX:MaxPermSize=128M -ms512M -mx1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
                  </category>
                  <category id="stop-parameters">
                     <data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
                  </category>
               </module-data>
               <start timeout="600" retry="2"/>
               <stop timeout="120"/>
               <restart timeout="720" retry="2"/>
               <ping timeout="300" />
               <port id="default-web-site" range="8888" protocol="ajp"/>
               <port id="rmi" range="12401-12500"/>
               <port id="rmis" range="12701-12800"/>
               <port id="jms" range="12601-12700"/>
               <process-set id="default_group" numprocs="1"/>
            </process-type>
         </ias-component>Now I did just see something that is either a bug, or a doc error. In the doc, it shows the attributes of the <ping> tag to be: timeout, retry, interval. However when you configure opmn.xml with these, it report an error.
Looking at the $ORACLE_HOME/opmn/conf/opmn.xsd file, it shows that only attributes are timeout and interval. You can't add a retry attribute. I'm not sure if this is a doc bug or an error in the XSD file.
Anyways, using the timeout parameter, for your DEBUGGING phase (not production!) you should be able to bump that up to a higher value to allow OPMN to wait longer for a response from OC4J before it nukes it.
-steve-

How to use Remote Debugging in JDeveloper 3.1 ?

I am trying to use the Remote Debugging option with EJBs in JDeveloper 3.1 with Oracle8i 8.1.6.
I checking all steps the online walkthrough for Remote Debugging EJB in 8i and it didn't work.
I'm using Oracle8i EJB/CORBA debug option in project properties, but it does not stop in my EJB's break points.
I tried deploying the EJB again ( with break points) and again it didn't work.
The error message I got in the trace file is:
Errors in file D:\Oracle\admin\SCT\udump\sctS000.TRC:
ORA-29516: Aurora assertion failure: Java thread deadlock detected
Could someone please tell me how to use it?
null

Which platform is the database running on ??
Other things you should check -
when debugging the EJB, JDev
3.1 looks through your IIOP connections to find the one to use.
Make sure that the IIOP connection that JDev is using for the debugging matches the IIOP connection that the EJB client application is using.
raghu
null

CF Builder w/ Coldfusion 9 remote debugging problem

Have coldfusion9 installed on my linux server, everything works fine, can access the admin page, run basic files, etc.
Have CF Builder Beta installed on mac, can write CF files and run them from linux server.
Trying to get remote debugging working and following the directions for starting up the Authentication server via adminstart.sh, runs fine, changed security.properties ips to be *. When I create the server definition in CF Builder I see on the Authentication server:
error Authentication failed: Login Failed
Even though I have enabled RDS, Debugging, etc via server config and i enter same name/pw (admin/mypassword) as when I login via web.
Therefore, I'm unable to control the server and when I try to debug, it says it launches but refuses to stop at any breakpoints.
Any help appreciated as I've read through as many docs as I can find and haven't been able to resolve this.
Thanks

Make sure that the port is not blocked by the firewall. Also, check this : http://forums.adobe.com/message/2636413

FINEST debug logs for ftp adapter

Hi All,
How do I turn on the FINEST debug level for ftp adapter in SOA application.
Thanks

Not sure you can do it just for file but
login to EM and navigate to SOA -> soa_infra
right-click on soa_infra and select logs -> log configuration
expand oracle.soa
you will see
oracle.soa.adapter
set this to the level you desire
cheers
James

Remote debugging

Is it possible to set up IFS to enable remote debugging?
I'd like to be able to attach JDeveloper debugger to the IFS JVM.
I run IFS on a remote machine.
Thanks,
Roman
null

Roman,
Have you checked the online help in Jdeveloper there is a lot of information on remote debugging.
If you use 1.1 you should check the following which I've copied from the online help:
Configuring Apache JServ for Remote Debugging Java Server Pages
If you are using Apache Jserv, you can debug using either the Oracle Java Virtual Machine (JVM) debugging protocol or the Sun Java Platform Debugging Architecture (JPDA). When you start your remote debugging session, you will have to choose which method to use. Depending on which one you choose, your configuration options are a little different.
Using Oracle's JVM
To use Oracle's JVM debugging protocol, you'll need to change the JVM that Apache JServ uses, modify the parameters you send to the JVM, and modify the CLASSPATH for Apache JServ.
These changes must be made on the computer that is hosting Apache JServ. If you do not have permission to make these changes, talk with your administrator.
Changing the JVM
In the jserv.properties file, set the wrapper.bin parameter to the full path of the JDeveloper JVM (java.exe). For example,
wrapper.bin=C:\Program Files\jdeveloper\java1.2\bin\java.exe
Setting parameters
In jserv.properties, set the wrapper.bin parameter to
wrapper.bin.parameters=-XXdebugondemandquietport4000
The -XXdebug parameter options are the following:
ondemand
Start the java program right away and allow a debugger to connect any time. Without this option, the Java program stays halted until a debugger is connected.
port4000
Debugger must connect at the specified port. Without this option, the port is 4000.
quiet
Don't print connection messages. Without this option, connection messages are sent to standard error.
Changing the ApJServerAction entry
In jserv.conf comment out any existing ApJServAction .jsp entries by putting a # at the beginning of the line.]
#ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
Add a new ApJServAction .jsp entry
ApJServAction .jsp /servlets/oracle.jsp.JspServlet
Adding servlet init parameters
In the servlet init parameters section of the zone.properties file, add the following lines.
servlet.oracle.jsp.JspServlet.initArgs=emit_debuginfo=true
servlet.oracle.jsp.JspServlet.initArgs=jspcompiler=oracle.jdeveloper.jsp.JspOjcCompiler
servlet.oracle.jsp.JspServlet.initArgs=classpath=C:\Program Files\Oracle\JDeveloper\java1.2\jre\lib\rt.jar
Setting the CLASSPATH
In jserv.properties, set wrapper.classpath to
wrapper.classpath=C:\Program Files\Oracle\JDeveloper\jswdk-1.0\lib\servlet.jar
Make sure that the location of ApacheJServ.jar is specified.
wrapper.classpath=C:\Program Files\Apache JServ\ApacheJServ.jar
Comment out the location of jsdk.jar.
#wrapper.classpath=C:\jsdk2.0\lib\jsdk.jar
Using JPDA
To use JPDA debugging protocol, you'll need to modify the parameters you send to the JVM, tell the server how to find the JDPA library, and modify the CLASSPATH for Apache JServ.
These changes must be made on the computer that is hosting Apache JServ. If you do not have permission to make these changes, talk with your administrator.
Setting parameters
In jserv.properties, set the wrapper.bin parameter to
wrapper.bin.parameters=-classic -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=4000 -Xdebug -Xnoagent -Djava.compiler=NONE
To see the invocation options for JPDA, see Sun VM Invocation Options.
If you are running on Solaris, you may also need to include stdalloc=y as part of the -Xrunjdwp paramater, like the following:
wrapper.bin.parameters=-classic -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=4000,stdalloc=y -Xdebug -Xnoagent -Djava.compiler=NONE
Adding the JPDA library
In jserv.properties, set wrapper.path to include the location of jdwp.dll. This file is is part of the Java Platform Debugging Architecture.
wrapper.path=D:\jpda\bin
If Apache JServ is running on Unix,
setenv LD_LIBRARY_PATH /home/jpda/lib/sparc:$LD_LIBRARY_PATH
setenv PATH /home/jpda/bin:$PATH
where home/jpda is the path to your JPDA installation. In addition, you will have to pass that environment variable through Apache to the JVM. To do that, in jserv.properties, add the following line:
wrapper.env.copy=LD_LIBRARY_PATH
Setting the CLASSPATH
In jserv.properties, set wrapper.classpath to
wrapper.classpath=C:\Program Files\Oracle\JDeveloper\jswdk-1.0\lib\servlet.jar
Make sure that the location of ApacheJServ.jar is specified.
wrapper.classpath=C:\Program Files\Apache JServ\ApacheJServ.jar
Comment out the location of jsdk.jar.
#wrapper.classpath=C:\jsdk2.0\lib\jsdk.jar
Let me know if this helps

Remote Debug - .SDA File or Adapter

Similar Messages

Maybe you are looking for