Remote jconsole JMX using mystery port

I am trying to use jconsole to monitor a JVM running on a remote machine. I am doing this over ssh. So I told the remote JVM to start with
-Dcom.sun.management.jmxremote.ssl=false
-Dcom.sun.management.jmxremote.authenticate=false
-Dcom.sun.management.jmxremote.port=8010
also I happen to have set
-Djava.rmi.server.hostlame=localhost
but I don't think that is relevant
Then I forwarded the port 8010 to the remote machine and connect with
jconsole localhost:8010
But that did not work. So I go to linux box and type
netstat -atnp | grep java
which reveals that Java is listening also on port 32796
I start and stop my process a few time to see that this is a randomly chosen port. I then use ssh to forward this port and voila, jconsole is now working across ssh.
Anyone have any idea what this mystery port is and any way to set it on the command line of the monitored JVM?

Have a look at the following link:
Monitoring Applications through a Firewall in the Java SE Monitoring and Management Guide.
Regards, 
Luis

Similar Messages

Setting up remote hard drive using air porter extreme?

Hi All,
Wondering how I set up my Mac Book Air to access a hard drive (LaCie 1 TB) thats plugged into my air porter extreme.
The intent is to be able to set this up so I can store a variety of data from my MBA and IPad and other Mac products. Not a computer guys so kinda need a set up for dummy directions....
Thanks,
j

Hello,
Here some info about setting up hard drive sharing with Airport:
http://support.apple.com/kb/ht1331

What are the pros and cons of using a port system.

Hello All,
I'm a new explorer in the OS X UNIX world, and have installed macports, and, for the most part, succeeded in building and using a number of scientific applications.
I have noted a somewhat negative attitude by some on the use of port systems, while others seem quite content with them.
When making my decision to use macports, these "selling points" seemed desirable to me:
¤ Confines ported software to a private “sandbox” that keeps it from intermingling with your operating system and its vendor-supplied software to prevent them from becoming corrupted.
¤ Allows you to create pre-compiled binary installers of ported applications to quickly install software on remote computers without compiling from source code.
Especially the first point seems valuable, but am I deluding myself? Or, am I losing functionality/ flexibility? Or, am I just missing out on manually installing lots of dependents?
_I'm not trying to start a feud, here._
I'm just looking for some pointers (preferably well-substantiated) from those more knowledgeable than me, before I am any further committed to a choice I might later regret.
Thanks,
PWK

The biggest drawback/complaint I have is that you're bound by the implementation/installation policy of whoever built the port.
For example, take the installation issue - all software gets installed into some specific directory which is great one one hand - fewer compatibility issues with conflicting versions from what Apple provide. The downside, though, is that nothing on your machine will use these versions unless/until you tweak them.
For example, maybe you want to install the MacPorts version of PHP, great, but the standard Apache won't use that, so you either need to install the MacPorts version of Apache, or tweak your Apache installation to use the non-standard PHP version.
Well, what about PATHs, I hear you ask? well, sure, you could prepend the MacPorts/fink/whatever directory to your $PATH, but then you always use the MacPorts/fink/whatever version of any installed software which might not be what you want.
This becomes more of an issue in a multi-server environment where you have multiple systems that all need tweaking/maintaining - nothing worse than setting up a new server by copying an existing installation, only to find that it depends on MacPorts/fink/whatever being installed.
The corollary to this is that these package managers often install ancillary software that you do not need, nor want. It might have improved since I last looked, but installing either MacPorts or fink, for example, installs whole new versions of perl, GNU tools (gzip/gunzip, etc.), curl, and more - they even install new copies of openssl/ssh.
I don't want these. These already exist on my system so what are they needed for? Why can't they use the standard copies? Are they 'tweaked' in some way? How? why?
The secondary issue is that you are limited to the port's implementation - especially compile options - which may not be ideal for your machine.
Unlike most GUI-based software, much open-source software uses compile-time options to configure the executable. Now the port installer might do a reasonable job of tweaking the installation, but it's not psychic so there will be cases where you end up with sub-optimal installations. Sure, they might work well enough, but that doesn't beat knowing what those options are up-front and building your own.
Now there have been cases where I've tried to install software and almost given up when faced with a daunting list of dependencies (try RRD, or PHP w/ GD, for example) and have almost given up, but when you succeed the satisfaction of getting it working, plus the fact you now know how to do it counts for a lot.
Now, do I wish that Apple would do a better job of keeping up with the latest versions of the open source software they include in Mac OS X? absolutely - isn't that what Software Update is all about??). But I also wish the port maintainers would spend more of their time updating the original source configure and make scripts to incorporate whatever changes they're making to the code so that Mac users can easily use the same source distribution as other UNIX flavors.
And right there is the final rub IMHO - all the while the port managers create their distributions of common tools Mac OS X is treated like a poor step-child that's kept in the cellar. OK, maybe not that bad, but there's no reason why anyone who wants to install open source software on a Mac should need much more than:
(download>
./configure
make
sudo make install
it really isn't all that hard. Too often the port managers perpetuate the myth that Mac OS X is too different from other UNIX systems to work with the standard tools that everyone else knows.
Now, maybe I'm also too old for this game since you always downloaded and built tools yourself when I started, and maybe package managers on Linux (which may have the same issues I've complained about) have helped elevate Linux in the mindset of a younger generation who are looking for a quick fix. All I can say to that is…
GET OFF MY LAWN! :-D

Upload a jar file in remote Weblogic server using wlst

Is there a way to upload a jar file to a specific location on remote weblogic server using wlst? This is my scenario - I need to upload aspectjweaver.jar to the remote server. This needs to be done before weblogic startup, as weaving takes place during startup . FTP is not an option because those ports are blocked

Hi,
You don't have such option through upload files as what FTP do but you can deploy the application through wlst.
eg:
deploy('Web14','C:/TEMP/Web14.war',targets='Cluster1',stageMode='stage',upload='true',remote='true')
Or you can use Deploy option to deploy app directly.
eg:
java weblogic.Deployer -adminurl http://localhost:7001
-username weblogic -password weblogic
-deploy ./myapp.ear -id myDeployment
This will upload file and place the file there from there you can manipulate the file.
Hope this will work for you.
Regards,
Kal

Sql server 2012 express - tcp/ip connection to named instance using dynamic port not working

I have a named instance on a SQL 2012 Express server that won't connect via TCP/IP when wanting to connect off of the dynamic port. I can connect via shared memory locally on the server.   I can connect to the namespace when specifying the
dynamic port listed in the configuration manager.
This is the only named instance on the server and it is not the default.
TCP/IP is enabled
Allow Remote connections is enabled
the server browser service is running
I can connect via the dynamic port number
I am testing the connection locally on the server, so I don't believe a firewall is the issue. I get the same results if I test it from a remote computer.
When using the sqlcmd (sqlcmd -S tcp:SQLSRVR\NAMEINST -E) I get the message that "the requested protocol isn't supported [xfffffffff]".   The command (sqlcmd -S tcp:SQLSRVR\NAMEINST,59992 -E) works.
Through SSMS, I get the message "the connection was actively refused".
On other boxes, I can connect with the named instance without having to specify the port.
I have looked through the sql logs and nothing much shows up. The log does show that is listening on the port # for ipv4 and ipv6.   There is also a line in there talking about the SPN not being registered and not to worry about it if
you are not using Kerberos. I logged in through shared memory and it said I was using NTLM.
Any help would be appreciated.
thanks.

Hi clw,
I’m writing to follow up with you on this post. According to your description, I do a test, if you configure the database engine to listen on a specific TCP port (59992), and
the port is opened in the firewall. If you want to connect to the SQL Server instance, you 'd better to
use the port number.
In my opinion, by default, the default instance of the Database Engine uses port 1433, usually, if you have configured the server to listen on a non-default port number, when an instance of SQL Server uses dynamic port allocation, the connection string that
is built at the SQL Server client does not specify the destination TCP/IP port unless the user or the programmer explicitly specifies the port. Therefore, the SQL Server client library queries the server on UDP port 1434 to collect the information about the
destination instance of SQL Server.
If UDP port 1434 is disabled, the SQL Server client cannot dynamically determine the port of the named instance of SQL Server. Therefore, the SQL Server client may be unable to connect to the named instance of SQL Server. In this situation, the SQL Server
client must specify the dynamically allocated port where the named instance of SQL Server is listening.
For more information about configuring an instance of SQL Server to listen on a specific TCP port or dynamic port, you can review the following article.
https://support.transfrm.com/entries/503111-How-to-configure-an-instance-of-SQL-Server-to-listen-on-a-specific-TCP-port-or-dynamic-port
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Connecting to remote database without using db links

Referred Thread:
Re: Remote DB connection without DB link
In reference to the thread above, my question goes like this:
Let's say I want to run a query from a database and use data from another database. I have the user, password, SID and port number of the other database but do not want to create a separate connection using sqlplus or connect commands.
Something like this:
SQL> show user
USER is "A"
SQL> select a.col1, b.col2 from tab1 a, tab2@????? where <some condition>;
Can this connection be done on the fly ?? I agree that a DB link will do the trick, but let's say I am not supposed to create objects on the other database.

You need two sets of privs on the remote database to view data in that database schema:
- create session (the schema must allow client connections to create schema sessions)
- select on other schema tables whose contents to view
You need a single priv on the local database, to connect to that remote schema on the other database:
- create database link
You also need the following in order to create the db link:
- the remote schema name and password
- IP address or hostname of the remote db server
- the remote Listener's tcp endpoint port
- the name of the remote database (SID, instance or service name)
If you do not have these privs, you cannot use/access the remote database from the local database session via a database link.
Other alternative methods needs additional privileges and objects on both the remote and local database sides - and are more complex (e.g. using web services, using web-enabled procedures, etc).

How to connect Portege M700 to TV using VGA port?

I bought a VGA to S-video/audio adapter and connected it to my VGA port and to the TV.
Nothing happened.
In control panel.... no other display/external display was detected.
The only postings I have come across use a port emulator or something.
I have the Portege M700 preinstalled with Vista Business tablet.
Any ideas would be most welcome.
Thanks

Thanks for answering.
I used an adapter which plugs into the VGA port on my M700 and allows either audio/display or S-video to connect to it. That is what I used, trying to connect via S-video or scart... and I'm afraid it did not work for me ;-(
It is a VGA to S-video/audio convertor.
Here is thye ebay link to the adapter I bought for this:
http://cgi.ebay.co.uk/VGA-to-TV-Converter-S-Video-RCA-Out-Cable-Adapter-UK_W0QQitemZ120343643231QQihZ002QQcategoryZ41993QQ tcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
I may be doing something stoopid... I hope I am but it worries me that if it works for you, there must be something wrong with my notebook :-(
The graphics adapter shows "single display" and the multiple display option is not available there.
I am confused as my old laptop used to work just fine.
I am wondering if there is something I need to activate, but there is nothing in the bios setup or control panel.
I just physically connected them and then clicked on the "connect to external display" as well as checking the graphics options.
Perhaps the cable is the wrong one ?
Message was edited by: cinnamongirl
Also, when I use FN + F5, nothing happens. No windows come up.

Using just the TV screen when using HDMI port?

Hi,
I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid. The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Problem in using serial port.

I am using serial port to get data from a fusion splicer. The number of bytes at the port is 4096 but the read buffer of VISA read is empty. I am reading the same number of bytes. Can any one tell me what is the maximum size of VISA Read buffer? I am trying to put the contents of the buffer in a file. I am using labVIEW 6.1 on linux.I am also attaching the VI.
I also noticed this problem...If I read the number of bytes in the serial buffer many times, sometimes it reads it as 0 and I have to keep trying until it reads this 4096 bytes.
Thanx for any help.
S.Vijayalakshmi
Attachments:
serail_comm.vi ‏52 KB

Hey Viji,
In your application it looks like you are just checking to see how many bytes are at the serial port. Is it possible that your application is check for the serial data at the port before the data actually gets there. If you are looping this code as a subVI or just running it over and over it is possible that one of the iterations could occur faster than your device can write the information to the bus. In this instance you are checking the number of bytes at the port and there might not be any there yet. In this case the port reads 0 as you have designed it.
If you want the read function to wait and always read 4096 then don't wire the bytes at port to the read function. Just wire a constant/control equal to 4096 to the read function instead o
f the bytes at port. In this case, if there are not any bytes at the port the read function will wait for the bytes to show up or until the timeout period is reached.
I would also, suggest lowering your time to something more reasonable, because if your instrument quits transmitting your application is going to wait for 33 minutes. That is a long time for a program to hang.
I hope this helps out.
JoshuaP
National Instruments

How to use thunderbolt port with disks and DVI-display

Hello,
today I use a 15" MacBookPro and have attached 1TB LaCie with FW800 (for time machine) and DVI-Display using Mini-port.
Need to add more external disk space and look for Lacie 2 TB with thunderbolt connection (for storing mass of pictures in Raid1 version)
Is it possible to connect the new disk, the other disk with an Thunderbolt->FW800 adapter and the DVI-Display to one thunderbolt port?
What are the options I have, to get all three to work at the same time?

No, or at least not without additional hardware. You have too many end-points for one Thunderbolt chain.
You also have the problem that the Thunderbolt->FW800 adapter is not yet for sale.
If the new disk you get has two Thunderbolt ports (which not all do), you could daisy-chain the Thunderbolt->FW800 adapter behind it, but that adapter has to be at the end of the chain. The Mini-port->DVI adapter likewise needs to be at the end of a chain.
So, you can probably get all three connected at one time by connecting the "1TB LaCie with FW800 (for time machine)" to your FW800 port, while connecting the Thunderbolt->FW800 adapter (when available) to the second port of the new disk. I say "probably" because nobody has the TB-FW adapter yet to try it.
As for doing it on one Thunderbolt port with additional hardware, you might look into third-party docking stations being released in the next few months. The announced prices are in the low-to-middle hundreds. I won't mention brand names, as this is an Apple forum, but they aren't too hard to find by web search.
The highest-priced solution would be the Apple Thunderbolt Display, which gives you a FW800 port for your 1TB drive, a pass-thru Thunderbolt port for your new disk, and of course a 2560x1440 display (plus ethernet and usb2 ports you may not need). It's available now, in the uppermost hundreds. There are some refurbs in the online Apple Store at the moment at 15% off.

How can I use two ports in the same time?

My application need one pc use two ports the same time.But when I open one port and my systerm is running the other port can't be opened.
I use the frame API in VC++6.0.
My OS is win2000 server;
The functions I used are ncOpenObject();

Hi DickW
Thank you for your help!
I have tried the example.But the example shows how to connect one CAN network with two ports.
I want each port connect to the net can both read and write;
I want to apply the function like this:
1.config the port1 and port2
2,open port1 and port2
But after I open port1 or port2 the other port can't be opened;
After I open the second port it always returns negative.
In the codes I use CAN0 and CAN1 as the CAN objects.
Attachments:
twoport.zip ‏1184 KB

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Kernel Panic when I use Serial Port

Hello,
I have a macbook pro 15" 2.66 Ghz 2009 running Mountain Lion.
I use Serial Ports for communicate with instruments via Matlab or CoolTerm, using bluetooth or USB. After some minute of work, my computer crash for kernel panic.
This is the log file about a crash with matlab and bluetooth, someone can help me?
Thanks in advance
Gildo
Wed Dec 19 11:59:55 2012
panic(cpu 0 caller 0xffffff8010a43d5b): "a freed zone element has been modified in zone: kalloc.1024"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:214
Backtrace (CPU 0), Frame : Return Address
0xffffff812c78b3a0 : 0xffffff8010a1d626
0xffffff812c78b410 : 0xffffff8010a43d5b
0xffffff812c78b450 : 0xffffff8010a435d2
0xffffff812c78b530 : 0xffffff8010a245ed
0xffffff812c78b560 : 0xffffff8010e22ca2
0xffffff812c78b580 : 0xffffff7f91e9b3ac
0xffffff812c78b6c0 : 0xffffff7f91dd21bd
0xffffff812c78b7f0 : 0xffffff7f91dc59aa
0xffffff812c78b9f0 : 0xffffff7f91dcba58
0xffffff812c78bad0 : 0xffffff7f91decfb3
0xffffff812c78bb40 : 0xffffff7f91decf2f
0xffffff812c78bbb0 : 0xffffff7f91e805c4
0xffffff812c78bbf0 : 0xffffff8010e47d9a
0xffffff812c78bc50 : 0xffffff7f91e81604
0xffffff812c78bc70 : 0xffffff7f91e7df64
0xffffff812c78bca0 : 0xffffff7f91c4c525
0xffffff812c78bce0 : 0xffffff7f91c4a036
0xffffff812c78bd10 : 0xffffff8010b1fe0c
0xffffff812c78bd50 : 0xffffff8010b24c56
0xffffff812c78bda0 : 0xffffff8010b11c96
0xffffff812c78bde0 : 0xffffff8010b094af
0xffffff812c78be10 : 0xffffff8010b08645
0xffffff812c78be60 : 0xffffff8010d4c56c
0xffffff812c78bed0 : 0xffffff8010d48b6f
0xffffff812c78bf20 : 0xffffff8010d4af60
0xffffff812c78bf50 : 0xffffff8010de182a
0xffffff812c78bfb0 : 0xffffff8010aced33
      Kernel Extensions in backtrace:
         com.apple.iokit.IOBluetoothFamily(4.0.9f33)[1C326A11-ADF7-353E-AD41-458D6A886E0 5]@0xffffff7f91db7000->0xffffff7f91e57fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910ea000
         com.apple.iokit.IOSerialFamily(10.0.6)[0165A9A0-F112-366C-9D82-EFC7344274F0]@0x ffffff7f91c49000->0xffffff7f91c56fff
         com.apple.iokit.IOBluetoothSerialManager(4.0.9f33)[6B6E14A7-7A68-3291-BFFF-F972 4D5B50FA]@0xffffff7f91e7b000->0xffffff7f91e84fff
            dependency: com.apple.iokit.IOSerialFamily(10.0.6)[0165A9A0-F112-366C-9D82-EFC7344274F0]@0x ffffff7f91c49000
         com.apple.iokit.AppleBluetoothHCIControllerUSBTransport(4.0.9f33)[867D6939-4D49 -3149-A1A5-380C236C8D12]@0xffffff7f91e8f000->0xffffff7f91eb5fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910ea000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f90ff2000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f910af000
BSD process name corresponding to current thread: MATLAB
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000010800000
Kernel text base: 0xffffff8010a00000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 4765863445501
last loaded kext at 2974523021770: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f91019000, size 229376)
last unloaded kext at 34978808166: com.parallels.kext.prl_usb_connect          7.0 15104.778994 (addr 0xffffff7f9114c000, size 28672)
loaded kexts:
com.nvidia.CUDA          1.1.0
org.virtualbox.kext.VBoxNetAdp          4.0.4
org.virtualbox.kext.VBoxNetFlt          4.0.4
org.virtualbox.kext.VBoxUSB          4.0.4
org.virtualbox.kext.VBoxDrv          4.0.4
com.parallels.kext.prl_vnic          7.0 15104.778994
com.parallels.kext.prl_netbridge          7.0 15104.778994
com.parallels.kext.prl_hid_hook          7.0 15104.778994
com.parallels.kext.prl_hypervisor          7.0 15104.778994
com.parallels.kext.prl_usb_connect          7.0 15104.778994
com.logmein.driver.LogMeInSoundDriver          1.0.0
at.obdev.nke.LittleSnitch          3854
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleUSBCDC          4.1.22
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.1f2
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBTCKeyEventDriver          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.AppleBluetoothHIDMouse          175.8
com.apple.driver.AppleHIDMouse          175.8
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Any or all of the following third-party system modifications may be contributing to your problem:
CUDA
VirtualBox
Parallels
LogMeIn
LittleSnitch
If the panic is recurrent, I suggest you uninstall all of them according to the developers' instructions, reboot, and see whether there's any improvement. If there is, you can experiment with putting them back, one at a time, to identify which one is at fault.

How to send to multiple people using same port?

I am trying to have one person send TWO audio sources to 10 others using same port- lets say 12345. I get "Can't open local data port:" error. The first audio is fine since I just use .addTarget(). Is there a way i can do the same for the 2nd audio source still using the same port? thanks!

As far as I know, you should transmit using even-numbered ports, eg. 22222 and 22224.
I think a port numbered 22223 and 22225 are opened respectively to handle control information.
Could be wrong, but try it anyway!
StHogan

Remote jconsole JMX using mystery port

Similar Messages

Maybe you are looking for