RemoteUpdateManager Error code: UpdaterCore failed for DownloadUpdates errorCode(207) curRefId(Adobe

Similar Messages

Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line. What is this and how do I correct it. This happens whenmaking a Blu ray ISO with Menu or no menu created
Using: I7 Windows7 machine with Production Premium CS5.5
I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
I encoded with no errors in Premiere.
I get this jsut after Encore starts to transcode the files.
Please help,
Steve

Go back to http://forums.adobe.com/community/encore and enter
Error Code 19
in the area just under Ask a Question
You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3

I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi

Hi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

What can I do about "LabVIEW load error code 38: Failed to uncompress part of the VI."

While attempting to load an executable LabVIEW application for LabVIEW 2009 SP1 on a Windows-XP machine when the following pop-up message occurs. "LabVIEW: Memory or data structure corrupt. An error occurs in loading VI 'NI_Gmath.lblib: Backward Bracket Search.VI'. LabVIEW load error code 38: Failed to uncompress part of the VI. The VI is most likely corrupt." What seems odd is that the same LabVIEW application loads fine when logged on as a privileged user account, but fails to load on a private user account.
Attachments:
2012-07-18 LabVIEW Load error code 38.jpg ‏1314 KB

Here's a thought:
So when something is decompressed, a temp folder is often used.
I have no idea why LabVIEW would be decompressing anything, but I suspect it is trying to put the decompressed file into a temp folder where the user does not have write permissions.
In the .ini file for your executable, you can add a line that specified the location of the temp folder to use:
tmpdir=C:\Temp
On my Win7 machine, the location is:
C:\Users\MyUserName\AppData\Local\Temp
On WinXP, it is probably:
C:\Documents And Settings\YourUserName\local settings\temp
Try changing the tmpdir key in your ini file to something to C:\Temp and see if that helps.
- john

Error code:-2147467259 Error code name:failed

Hi everyone,
i am using IBM websphere studio apllication developer integration edition with crystal reports 11 release 2.
while running jsp program i got following exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: The supplied keycode is not valid for this version of the Java Reporting Component---- Error code:-2147467259 Error code name:failed
I tried but i am not able to resolve this problem.
can anybody tell me what to do with this problem.
Thanks in advance.

Hi everyone,
i am using IBM websphere studio apllication developer integration edition with crystal reports 11 release 2.
while running jsp program i got following exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: The supplied keycode is not valid for this version of the Java Reporting Component---- Error code:-2147467259 Error code name:failed
I tried but i am not able to resolve this problem.
can anybody tell me what to do with this problem.
Thanks in advance.

Error code:-2147467259 Error code name:failed Java desktop application

Hi guys,
I'm trying to run
Java_JRC_Desktop_View_Report_and_set_database_logon downloaded from this link:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0d6f979-3e11-2c10-35a8-ac93994a30ed
but at runtime my java desktop application throws this Exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: org/apache/log4j/Logger---- Error code:-2147467259 Error code name:failed
From what depends?
thx all.

Hi,
     I am trying to run a java code to export .rtf file to .pdf format. Below is the code
*String reportname = "D:\\multiLingual.rpt";;*
*String exportfilename ="D:\\multiLingual.pdf";*
*//Open report.*
*ReportClientDocument reportClientDoc = new ReportClientDocument();*
*reportClientDoc.open(reportname, 0);*
*//NOTE: If parameters or database login credentials are required, they need to be set before.*
*//calling the export() method of the PrintOutputController.*
*//Export report and obtain an input stream that can be written to disk.*
*//See the Java Reporting Component Developer's Guide for more information on the supported export format enumerations*
*//possible with the JRC.*
*ByteArrayInputStream byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);*
*//Release report.*
*reportClientDoc.close();*
*//Use the Java I/O libraries to write the exported content to the file system.*
*byte byteArray[] = new byte[byteArrayInputStream.available()];*
*//Create a new file that will contain the exported result.*
*File file = new File(exportfilename);*
*FileOutputStream fileOutputStream = new FileOutputStream(file);*
*ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream(byteArrayInputStream.available());*
*int x = byteArrayInputStream.read(byteArray, 0, byteArrayInputStream.available());*
*byteArrayOutputStream.write(byteArray, 0, x);*
*byteArrayOutputStream.writeTo(fileOutputStream);*
*//Close streams.*
*byteArrayInputStream.close();*
*byteArrayOutputStream.close();*
*fileOutputStream.close();*
I am running it through eclipse as a standalone with all the required jar files in the buildpath. However when i run it gives following error in console.
*com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: An error occured while exporting the report---- Error* *code:-2147467259 Error code name:failed*
*     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)*
*     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)*
*     at com.crystaldecisions.reports.sdk.PrintOutputController.export(SourceFile:54)*
*     at test.main(test.java:34)*
Thanks in advance
Abhijeet
Edited by: Abhijeet D on Jul 7, 2010 5:10 PM
Edited by: Abhijeet D on Jul 7, 2010 5:24 PM

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

Receiving error message "Login failed for user 'NT AUTHORITY\SYSTEM'" every minute on server which is the mirror

Hello,
I have 2 SQL Server 2008 R2 machines that are configured with database mirroring (using certificates as authentication), there is no witness configured. My issue is that the mirror server is receiving at least one of the below pared messages every
second and filling up my sql error log quickly.
SYSTEM is the service account user for the MSSQLSERVER service.
[298] SQLServer Error: 4060, Cannot open database "<databasename>" requested by the login. The login failed. [SQLSTATE 42000]
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\SYSTEM'. [SQLSTATE 28000]
The database has a status of: Affected database state is: Mirror, Synchronized/Restoring...
When I checking the database mirror monitor, it shows that its mirroring ok and everything has green checkboxes.
Is there a way to stop all these errors being logged, I'm assuming this isn't normal.
Marcus

Yes i have faced the same issues and tried everything and nothing was using this account, system was ended up with creating few GB's sql error log files everday.. and finally i had two options, 1 -- Rebuild the instance completely 2. Change the SQL Server
Audit settings to Only successful logins and restart the instance.. ( May be your current sql server level Audit setting is set to Failed & Successful logins..
Remeber my server was a DR so I have changed the SQL Server Audit settings to only Successful logins.. but production servers we will monitor both... :)
Raju Rasagounder Sr MSSQL DBA

SMTP Error Code : 530 . For more information, see your SMTP server manual.

Hello,
I am Getting
"SMTP Error Code : <530>. For more information, see your SMTP server manual" error, While configuring SMTP in Data Services 4.0 system. I have tried executing the SMTP_TO function on another DS machine which has 3.2 verion installed, but getting the same error.
FYI,
1) Able to telnet the Exchange server through Data service machine
2) Maintained SMTP settings in Data services server manager
3) using the same SMTP server host name in other SAP systems (ECC,BI,PI) etc and able to send mails.
Regards
Puneet

Thanks for the reply Julian.
There was a problem in SMTP relay rights on Exchange server. Able to send mails now. Thanks!
Getting another problem wherein I am not able to send mails to multiple recipients i.e. If I specify 5 recipients in SMTP_TO function and execute the job then Every individual is getting E-Mail having there own ID in TO field, other Id's are not gettting displayed in TO field.
I hve checked note "1276348 - smtp_to function - multiple recipients not displayed"
Settings mentioned in the note have been done and job is getting executed without any error but the mails are not getting delivered.
It would be great if anyone can suggest on how to proceed here.
Thanks & Regards
Puneet

Error:Registered login failed for shared services...

Hi All
while i was configuring the Calc Manager after foundation services ,the window display the error:Registered login failed for shared services....
I try to use the correct user name and password for it .check the installation guide for Hyperion version is 11.1.2 .do not know where to look for correct information to make this configuration work.
Any help would be very useful .
Thanks

Which is the process connecting using machine account?
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

RemoteUpdateManager Error code: UpdaterCore failed for DownloadUpdates errorCode(207) curRefId(Adobe

Similar Messages

Maybe you are looking for