Remove Appended Structure from standard table

Hi Experts,
I have appended a Z structure to table VBAP.
I want to remove it now. How can I do?
Rajiv Ranjan

Hi Rajiv Ranjan,
to delete the append structure from the database table, follow the points
1. Goto se11
2. enter your append structure name.
3. press delete
4. It will delete this append,
also in the original table/structure
where it is used, AUTOMATICALLY.
5.now the data base table VBAP is partially active so
go to tcode se14 and give the table name and click on EDIT button
and click on ACTIVATE AND ADJUST button.
then it will work.
if it is not possible reply to me.
regards
sreenivas

Similar Messages

Append Structure in Standard Table

Hi Gurus,
My problem Is:---
I create an Append Structure on Standard Table..it create successfully..but after it, when i want to activate the standard table, it gives errors....
Not standard table is partially active...
I want to reverse it back...how it is possible....
My Solution:.. I try my besy through SE14...there I give the Table name and click on EDIT...
there i click on Activate and Adjust Database...but there it gives errors....
Append structure ZMARC11 appended to table MARC
Current enhancement classification 'enhanceable and numeric or char.type' is incorrect
The following enhancement classifications can be selected:
'Can Be Enhncd(Deep)'
Field MATNR in table MARC is specified twice. Please check
Field MATNR: Reference MATNR to class w/o interface cannot be used in DB table MARC
Field MEINS: Reference MEINS to class w/o interface cannot be used in DB table MARC
Attachment of search help MAT1 to field MARC-MATNR is deleted
Activation of Table MARC not possible (please check)
Request for MARC could not be executed..
Plz. Help....

Hi,
I know the fields name...
MARC-MATNR...and MARC-MEINS...
How can i revert back....
Plz Help...

Removing Append Structures

Hi,
how it is possible to remove append structure of a table ?
Thank you.
Marian

Hi Marian,
I don't dare to make a test, but:
enter your append (e.g. ZAMARA) in SE11, third line (data type) and press delete, afterwards active your table again (e.g. MARA).
Tell us, if your system still works.
Save way: delete all other fields and leave only one dummy char1 field of your append.
Regards,
Christian

Appending structures to the tables

Hi experts,
Why we are appending sturctures to the tables?
can any one tell me the main differences between the APPEND and INCLUDE structures
in Datadictionary.
Thanks in Advance.

Hi Ankita,
Customizing Includes
A Customizing include is a structure that satisfies a special naming convention. The name of a Customizing include begins with u2018CI_u2019 and the include is in the customer namespace.
If enhancements are already planned in the R/3 standard using customer-specific fields, such Customizing includes are included. in the corresponding standard table or standard structure. The Customizing include (that is the definition of the structure itself) is usually first created in the customer system and filled with fields by special Customizing transactions.
Customers can thus enhance tables and structures of the R/3 standard system without themselves having to modify the table and structure definitions. This means that these enhancements will not be lost when upgrading. If a table or structure of the R/3 standard system is enhanced with customer fields using a Customizing include, these customer fields are automatically inserted in the new delivered table or structure definition during an upgrade.
If you create a Customizing include for a table or structure, only those enhancements are allowed that are consistent with the enhancement category of the enhanced table or structure. For more information, see Structure Enhancements.
Customers can but need not create a Customizing include and fill it with fields. If there is no Customizing include, there is no error message when the table or structure including it is activated.
A Customizing include can be contained in several tables or structures, so that they remain consistent when the include is modified.
Append Structures
Append structures are used for enhancements that are not included in the standard. This includes special developments, country versions and adding customer fields to any tables or structures.
An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
The following enhancements can be made to a table or structure TAB with an append structure:
Insert new fields in TAB,
Define foreign keys for fields of TAB that already exist,
Attach search helps to fields of TAB that already exist,
These enhancements are part of the append structure, i.e. they must always be changed and transported with the append structure.
When a table or structure is activated, all the append structures of the table are searched and the fields of these append structures are added to the table or structure. Foreign keys and search help attachments added using the append structure are also added to the table. If an append structure is created or changed, the table or structure assigned to it is also adjusted to these changes when the append structure is activated.
Since the order of the fields in the ABAP Dictionary can differ from the order of the fields on the database, adding append structures or inserting fields in such append structures does not result in a table conversion.
The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP.
Reward if found helpful.
Anirban Bhattacharjee

Appending data from one table to another

Hello
How to append data from one table t1 to another table t2.
t1 and t2 have the same structures .
t2 contains already data so i don't want do delete it and create it as select * from t1.
If there is a mean to add t1 content without altering t2 content.
Thanks in advance

insert into t2
select * from t1

How to remove the bookmark from the table of contents?

Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...

Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again!

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

First attempt to remove duplicate rows from a table...

I have seen many people asking for a way to remove duplicate rows from data. I made up a fairly simple script. It adds a column to the table with the cell selected in it, and adds the concatenation of the data to the left into that new column. then it reads that into a list, and walks through that list to find any that are listed twice. Any that are it marks for DELETE.
It then walks through to find each one marked for delete and removes them (you must go from bottom to top to do this, otherwise your row markings for delete don't match up to the original rows anymore). Last is to delete the column we added.
tell application "Numbers"
activate
tell document 1
-- DETERMINE THE CURRENT SHEET
set currentsheetindex to 0
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of (tables whose selection range is not missing value)
end tell
if x is not 0 then
set the currentsheetindex to i
exit repeat
end if
end repeat
if the currentsheetindex is 0 then error "No sheet has a selected table."
-- GET THE TABLE WITH CELLS
tell sheet currentsheetindex
set the current_table to the first table whose selection range is not missing value
end tell
end tell
log current_table
tell current_table
set list1 to {}
add column after column (count of columns)
set z to (count of columns)
repeat with j from 1 to (count of rows)
set m to ""
repeat with i from 1 to (z - 1)
set m to m & value of (cell i of row j)
end repeat
set value of cell z of row j to m
end repeat
set MyRange to value of every cell of column z
repeat with i from 1 to (count of items of MyRange)
set n to item i of MyRange
if n is in list1 then
set end of list1 to "Delete"
else
set end of list1 to n
end if
end repeat
repeat with i from (count of items of list1) to 1 by -1
set n to item i of list1
if n = "Delete" then remove row i
end repeat
remove column z
end tell
end tell
Let me know how it works for y'all, it worked good on my machine, but I know localization is causing errors sometimes when I post things.
Thanks,
Jason
Message was edited by: jaxjason

Hi jason
I hope that with the added comments it will be clear.
Ask if something is always opaque.
set {current_Range, current_table, current_Sheet, current_Doc} to my getSelection()
tell application "Numbers09"
tell document current_Doc to tell sheet current_Sheet to tell table current_table
set list1 to {}
add column after column (count of columns)
set z to (count of columns)
repeat with j from 1 to (count of rows)
set m to ""
tell row j
repeat with i from 1 to (z - 1)
set m to m & value of cell i
end repeat
set value of cell z to m
end tell
end repeat
set theRange to value of every cell of column z
repeat with i from (count of items of theRange) to 1 by -1
(* As I scan the table backwards (starting from the bottom row),
I may remove a row immediately when I discover that it is a duplicate *)
set n to item i of theRange
if n is in list1 then
remove row i
else
set end of list1 to n
end if
end repeat
remove column z
end tell
end tell
--=====
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers09" to tell document 1
set theSheet to ""
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
(* Open a trap to catch the selection range.
The structure of this item
«class
can't be coerced as text.
So, when the instruction (selection range of table y) as text
receive 'missing value' it behaves correctly and the lup continue.
But, when it receive THE true selection range, it generates an error
whose message is errMsg and number is errNum.
We grab them just after the on error instruction *)
try
(selection range of table y) as text
on error errMsg number errNum (*
As we reached THE selection range, we are here.
We grab the errMsg here. In French it looks like:
"Impossible de transformer «class
The handler cuts it in pieces using quots as delimiters.
item 1 (_) "Impossible de transformer «class » "
item 2 (theRange) "A2:M25"
item 3 (_) " of «class NmTb» "
item 4 (theTable) "Tableau 1"
item 5 (_) " of «class NmSh» "
item 6 (theSheet) "Feuille 1"
item 7 (_) " of document "
item 8 (theDoc) "Sans titre"
item 9 ( I drop it ) " of application "
item 10 ( I drop it ) "Numbers"
item 11 (I drop it ) " en type string."
I grab these items in the list
{_, theRange, _, theTable, _, theSheet, _, theDoc}
Yes, underscore is a valid name of variable.
I often uses it when I want to drop something.
An alternate way would be to code:
set ll to my decoupe(errMsg, quote)
set theRange to item 2 of ll
set theTable to item 4 of ll
set theSheet to item 8 of ll
set theDoc to item 10 of ll
it works exactly the same but it's not so elegant.
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
exit repeat (*
as we grabbed the interesting datas, we exit the lup indexed by y.*)
end try
end repeat -- y
if theSheet > "" then exit repeat (*
If we are here after grabbing the datas, theSheet is not "" so we exit the lup indexed by i *)
end if
end tell -- sheet
end repeat -- i
(* We may arrive here with two kinds of results.
if we grabbed a selection, theSheet is something like "Feuille 1"
if we didn't grabbed a selection, theSheet is the "" defined on entry
and we generate an error which is not trapped so it stops the program *)
if theSheet = "" then error "No sheet has a selected table."
end tell -- document
(* Now, we send to the caller the interesting datas :
theRange "A2:M25"
theTable "Tableau 1"
theSheet "Feuille 1"
theDoc "Sans titre" *)
return {theRange, theTable, theSheet, theDoc}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d (*
Cut the text t in pieces using d as delimiter *)
set l to text items of t
set AppleScript's text item delimiters to "" (*
Resets the delimiters to the standard value. *)
(* Send the list to the caller *)
return l
end decoupe
--=====
Have fun
And if it's not clear enough, you may ask for more explanations.
Yvan KOENIG (from FRANCE mardi 27 janvier 2009 21:49:19)

How do you remove the borders from a table item

In OAF I have a set of data stored in a table that I must display. However, I must make it look like it is not in a table. I can't use a tablelayout because it is a set of records and records are constantly being added. How do I remove the borders and the pagination from the table?

I think you can't do anything about this.
Change you design as per Browser Look and Feel standards.
http://www.oracle.com/technology/tech/blaf/index.html
--Prasanna

Error while appending structure into BSEG Table

We had appended BSEG table with a ZSTRUCTURE to enable Custom field in MIRO. Subsequently there was a change required in the appended field. After Changing the field there was adjustment required to activate the appended table . However due to slow system performance during that time the Adjustment SE14 timed out. And created inconsistency in BSEG table.
If I Do the Table adjustment now it is showing below error.
We tried to delete the append structure also but the structure is not appearing in the append structure list to delete.
Even if we try deleting the Z structure from se11 it is throwing below error.
Any one could help me out to resolve this..

hi Ramesh,
Please First Check if the Database version and disctionary version are in sync.
Also, it could be the case that you would have enhanced an already existing Append stucture. which might be being used in other BKPF dependent tables.
Please check

Getting Error in Append Structure for Standard

Hi all,
Here i want to Append Structure in table RFPOS so i done all procedure . in this i have four field like ZZKUNNR , ZZNAMED , ZZLIFNR, ZZNAMEK. But when i active this structure this time i get error like
"Field name INDEX is reserved (Do not use structure as include in DB table)"
and
"Field name ORDER is reserved (Do not use structure as include in DB table)"
BUT structure is activated . now i can see my change in fbl3n T-code so i get proper change in this.
But when i transport a request in Quality this time i am not getting same output which i get in Development .
And yes request is transported with warning (YELLOW SIGN). So is it possible for this warning i am not geeting my proper output in FBL3N.
Please kindly help me out
Thanks
Keyur

Hello,
Did you do anything else also that you might have missed to mention here?
For example, was your Append structure already present in the table RFPOS & you deleted some of the fields & inserted the new ones. In this case, you might have to activate the table from database utility (transaction SE14).
If this is an append structure & if it was pre-existing (not created by you), then this structure might already had been assigned to any other table. In such a case, system will not allow you to directly assign it to a different table. You may have to first assign it to an INCLUDE structure.
Also, as you described, it indicates that there might be some problem with the fields named INDEX & ORDER. Try checking for it.
May be you should check with your BASIS guy if the transport was successful & if not, the error description.
Also, try checking the quality system for your changes.
Hope that helps you in getting some direction.
Let me know if that work out for you or not.
Regards,
Saurabh

Remove a row from multiple tables

Hello,
I have a form that has what appears to be one table. Since I needed 30 columns (29 of them are single character fields) I had to use 2 table objects. Then I needed the ability to add and remove rows. Adding a row at the end is easy enough. Deleting a specific row is the problem. At the moment, I added a third table which has a header row and a item body row. the body row is a button with the intention of removing that entire row from the large table. This means it needs to remove the row from all 3 tables.
My structure is:
form1
(Some other flowed subform that doesn't matter for us)
SubformPersonnel (a flowed subform)
SubformHeader (a positioned subform)
TextOverallHeader (text to label the oeverall 3 tables)
ButtonAddRow (adds a row to the end of all 3 tables)
SubformPersonnelTable (a positioned subform)
ContractorTableRemove (a table with 1 column for the Remove button)
HeaderRow (A hidden row to align the table with the other 2)
Item (A row with the Remove button)CellRemoveButton (the cell with the remove button and associated JavaScript)
ContractorTableLeft (a table with the left 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
ContractorTableRight (a table with the right 15 printed columns)
HeaderRow
Contractor (A row of data to be removed when CellButton above is clicked)
(Some other flowed subforms that I am not worried about at the moment)
The 3 tables are aligned so the headers all line up, with no spaces between them. The body rows then line up and this looks like one large table. From left to right, they are:
ContractorTableRemove, ContractorTableLeft, ContractorTableRight
So Item and Contractor rows are added when ButtonAddRow is clicked in the overall header. The intial count is set to 8 for each table, so I get 8 rows at startup. The minimum count is set to 1 for each. I know that each row of each table has the same index number because I filled those into a cell in each table durig the cell's initialize. This line, in the CellRemoveButton's click event deletes that cell's row in that table:
this.parent.parent._Item.removeInstance(this.parent.index);
I have tried all sorts of ways to delete the same row (using same index #) in the other 2 tables: ContractorTableLeft and ContractorTableRight, but don't seem to be getting the correct syntax correct. I have tried hard coding the references, using .parent as shown below, and also tried using an index of 1 just to try deleting a row with no results.
     this.parent.parent.parent.ContractorTableLeft._Contractor.removeInstance(this.parent.inde x);
Can someone get me the correct syntax here?
I have seen examples of putting a hidden delete button on each table and clicking that, but I am concerned that it will get in the way of the tables on either side of the table it is in. I reeally want to just reference the row and remove it so I can avoid any problems these additional delete problems may cause.
I have copied the form to https://acrobat.com/#d=7M8R50rEHf4AaVXppwyKLw

Thank you, Niall. Much appreciated!
The Delete button was more to make sure one could delete these outside a button in the actual row and I see I had the index wrong such that I was deleting the second row and not the first. I had toyed with using this as a hidden button if I could pass the index to the event's function.
I had not thought of adding the reference to each row as a variable. It seems to work very well.
For future reference to others, here is the code from the cellRemoveButton click event:
     // Declare some variables
     var i = this.parent.index;
     var oContractorLeft = ContractorTableLeft.Contractor;
     var oContractorRight = ContractorTableRight.Contractor;
     // Remove this row by accessing its index within the set of 'Item' row instances of the parent table
     _Item.removeInstance(i);
      // Since this table is actually 3 tables, we need to remove the other two table's instances as well.
     // Their index should be the same, so we just need to get their names correct.
     oContractorLeft.instanceManager.removeInstance(i);
     oContractorRight.instanceManager.removeInstance(i);
      // removing the row doesn't trigger calculations in tables in the form's current target (fixed in later versions of Acrobat)
     // force calculations to fire so the ItemIndex field's value is updated according to the remaining row's indexes
     // see http://forms.stefcameron.com/2006/05/20/add-recalculate/
     xfa.form.recalculate(1);
Again, thank you!
Karl

Assignment between include/Append structures and Database Tables

Hi All,
I need to find the list of all Append/Include Structures in my system and Their assignment to Tables.
(For Each Append/Include structure, to which table it was assigned)
Is there any way to find it?
Thanks,
Krishna.

Hi,
Go to se11 - data type - give Z* and press F4.
Pop-up will come - click on search for structures - u will get standard structures.
Then take any structure name and check for where used list ( cont + shift + F3) .
U will get all the DB tables where and all they have used that include / append structure.
Regards,
Kusuma.

How to delete append structure in a table?

Hi guys,
How can I delete the structure appended to a table?
Thanks in advance!

hi,
select the structure in the table which the atructure is available by going to SE11
and choose the Delete line option by right clicking.
or
Go to SE11
enter the structure name
choose the delete option from Application toolbar.
<b><i>Reward points if useful</i></b>
Chandra
Message was edited by:
Chandrasekhar Velpula

Append Structure in FPLT table

Hi,
I'm posting this query after going through various posts on the subject.
We are in 4.7 version and would like to add custom fields to table FPLT, to store additional information.
Since there are no customer includes in FPLT table, we intend to add append structure with our new fields.
Want to know if anyone has done similar enhancement? and if there is any negative impact on billing etc?
In some posts the exits RV60FUS1 & RV60FUST has been suggested to use. However,not sure how these can be used to store data in custom fields without modifying FPLT table. Appreciate any suggestion/solution. Thanks

Hi Sanjay,
That is indeed the reason why I wanted you to use a Z table.
You can of course draft the entire set of business processes and how the table needs to be updated in all those scenarios. The scenarios can include
Inclusion of a billing record in the billing plan
Deletion of a billing record
Change of billing percentage, value , date category, billing type, billing block etc on a billing plan
Creation of billing document for a billing plan item etc....
You need to think of all these scenarios and update the Z table. Innovatively, you can also delete the records from this Z table (if that is possible in ur process flow) when the last billing plan item is processed for billing creation. We have such scenarios and we enable the deletion of some Z tables in some our processes

Remove Appended Structure from standard table

Similar Messages

Maybe you are looking for