Getting Error in Append Structure for Standard

Hi all,
Here i want to Append Structure in table RFPOS so i done all procedure . in this i have four field like ZZKUNNR , ZZNAMED , ZZLIFNR, ZZNAMEK. But when i active this structure this time i get error like
"Field name INDEX is reserved (Do not use structure as include in DB table)"
and
"Field name ORDER is reserved (Do not use structure as include in DB table)"
BUT structure is activated . now i can see my change in fbl3n T-code so i get proper change in this.
But when i transport a request in Quality this time i am not getting same output which i get in Development .
And yes request is transported with warning (YELLOW SIGN). So is it possible for this warning i am not geeting my proper output in FBL3N.
Please kindly help me out
Thanks
Keyur

Hello,
Did you do anything else also that you might have missed to mention here?
For example, was your Append structure already present in the table RFPOS & you deleted some of the fields & inserted the new ones. In this case, you might have to activate the table from database utility (transaction SE14).
If this is an append structure & if it was pre-existing (not created by you), then this structure might already had been assigned to any other table. In such a case, system will not allow you to directly assign it to a different table. You may have to first assign it to an INCLUDE structure.
Also, as you described, it indicates that there might be some problem with the fields named INDEX & ORDER. Try checking for it.
May be you should check with your BASIS guy if the transport was successful & if not, the error description.
Also, try checking the quality system for your changes.
Hope that helps you in getting some direction.
Let me know if that work out for you or not.
Regards,
Saurabh

Similar Messages

  • I am getting error while doing MFBF for semifinisg good

    Hi,
    i am getting error while doing MFBF for semifinisg good
    Existing standard cost estimate cannot be used
    Message no. RM175
    Diagnosis
    This error appears under the following circumstances:
    The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
    The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
    Procedure
    The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
    Use product costing to create the standard cost estimate.

    I had already check REM profile repetitive mfg profile final backflush w. activities.
    this particular material is semifinish material attached in BOM of finish material.
    backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
    i had assign production version , done routing and maintain REM profile,
    created material cost with quantity structure ck11n then run the costing in ck40n.
    still getting the error what else is to done to able to book this thru MFBF.

  • Append Structure in Standard Table

    Hi Gurus,
    My problem Is:---
    I create an Append Structure on Standard Table..it create successfully..but after it, when i want to activate the standard table, it gives errors....
    Not standard table is partially active...
    I want to reverse it back...how it is possible....
    My Solution:.. I try my besy through SE14...there I give the Table name and click on EDIT...
    there i click on Activate and Adjust Database...but there it gives errors....
    Append structure ZMARC11 appended to table MARC
    Current enhancement classification 'enhanceable and numeric or char.type' is incorrect
    The following enhancement classifications can be selected:
        'Can Be Enhncd(Deep)'
    Field MATNR in table MARC is specified twice. Please check
    Field MATNR: Reference MATNR to class w/o interface cannot be used in DB table MARC
    Field MEINS: Reference MEINS to class w/o interface cannot be used in DB table MARC
    Attachment of search help MAT1 to field MARC-MATNR is deleted
    Activation of Table MARC not possible (please check)
    Request for MARC could not be executed..
    Plz. Help....

    Hi,
    I know the fields name...
    MARC-MATNR...and MARC-MEINS...
    How can i revert back....
    Plz Help...

  • Append Structure for Table

    Hi All,
    I have added an append structure to a table in SE11. While adding the append structure i opened the table in display mode and added the append structure. I have also activated the append structure.
    But in my transport request i can  only see the append structure and not the original table. Is it safe to transport such a request ?

    Hello,
    When you're APPEND'ing a table you're not modifying the original table.
    You are linking the APPEND structure to the original table & the linkage is maintained in the APPEND structure(see the "Attributes" tab of the APPEND structure).
    Yes, the original table gets activated & adjusted when you activate the APPEND structure but it won't ask you for a TR. Whenever the TR is imported to the subsequent system the original table will automatically get activated & adjusted.
    Hope i'm clear. You can read the F1 documentation on APPEND structures for further info.
    BR,
    Suhas

  • Source of xslt mapping and XSD/ XMT target structures for standard Idocs

    Hi,
    I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
    Thank you in advance.
    Anand More.

    Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
    As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
    For some help on XSLT mapping check the following threads,
    https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
    https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
    Also have a look at my code samples,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
    cheers
    Sameer

  • How to find where the code for append structures for LIS extractors?

    Hi,
    I found 4 append structures for extractor 2LIS_03_BF,
    Out of 4 append structures, I found code for one, using where-used option. But in vain for other 3. Is it possible they didn't transport the code for remaining structures? how to find that?
    Cheers,
    Kannan N

    Kannan,
    When ever you apply a logic to populate tdata for the appended filed then you will be writing some code in CMOD transaction code where you will find a ZXRSAU01
    program, just double click on that then it will take you to the complete exit. Ther you can find with your data source name.
    Hope it helps...
    ****Assign Points if it helps******
    Gattu

  • Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

    Hi, Experts:
    I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
    In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
    I have done the following in client 200:
    - Activated datasources for for PM 2LIS_17_I3HDR in RSA5.  
    - Made selection in RSA6.
    - Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
    - I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
       No extraction structure for event I3: Messages active
       Message no. MCEX106
       Diagnosis
       You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
       System Response
       Data for event I3 is not transferred to the BW interface.
       Procedure
       First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
    - I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
    - I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
    Would anyone please help me with what to do to fix this?
    Thanks,
    Jenny
    Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

    Hi, thanks for the reply!
    Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
    Thanks,
    Jenny

  • Error  invalid location structure for this operating unit

    Dear all
    when go to Receivables > setup> tax > locations i get this error and i can't solve it
    invalid location structure for this operating unit
    any one can help

    Hi
    In system option u have to define the tax type .there is a tab in system option Tax and Defaults.select u r tax type and enter the tax code.
    Regards
    Ahmed

  • Error while appending structure into BSEG Table

    We had appended BSEG table with a ZSTRUCTURE to enable Custom field in MIRO. Subsequently there was a change required in the appended field. After Changing the field there was adjustment required to activate the appended table . However due to slow system performance during that time the Adjustment SE14 timed out. And created inconsistency in BSEG table.
    If I Do the Table adjustment now it is showing below error.
    We tried to delete the append structure also but the structure is not appearing in the append structure list to delete.
    Even if we try deleting the Z structure from se11 it is throwing below error.
    Any one could help me out to resolve this..

    hi Ramesh,
    Please First Check if the Database version and disctionary version are in sync.
    Also, it could be the case that you would have enhanced an already existing Append stucture. which might be being used in other BKPF dependent tables.
    Please check

  • I am getting error messages installing update for CS6 Design & Web Premium

    I am getting error messages after trying to install an update for CS6 Design & Web Premium on my Imac running OS 10.6.8. The errors are all U44M1I215 with one U44M1D207 for Fireworks. Please assist.   dand45036
    Here are all the errors.
    DPS Desktop Tools CS6 32.0.0 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Dynamic Link Media Server CS6 1.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Extension Manager 6.0.8 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Adobe Photoshop 13.0.6
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Dreamweaver CS5.5 11.5.3 Updater
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
    Flash Pro CS6 update 2
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I215
    Fireworks CS5 11.0.2 Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
    Fireworks CS6 update to improve Mac 10.8 platform compatibility and resolve usability bugs.
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Adobe Bridge CS6 5.0.2 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Adobe InDesign CS6 (8.1.0) update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Dreamweaver CS6 (to version 12.0.3) to address HiDPI-compliance and resolve critical bugs.
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15
    Adobe Illustrator CS6 Update (version 16.0.4)
    There was an error installing this update. Please quit and try again later. Error Code: U44M1U15

    you can update manually:
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2014 updates:  win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

  • Field in Append Structure for Generic Datasource

    Hi:
    I created a Generic Datasource based on a view. After that, I created an Append to the Extraction Structure to include a field not originally on the view (and not related to any table in the view) to be calculated using customer exit in CMOD.
    At the moment of activating the Datasource, this new field doesn't appear in the selection window but in RSA6 it shows there with options "Hide Field" and "Field only Known in Customer Exit" checked.
    Again, I try to edit the Datasource but this field is not in the list to change those two checks.
    Any idea?
    Thanks.
    Luis Sales

    Dear Luis Sales,
    I was having the same requirement. I tried it hard for removing the tick mark on the HIDE option. But it was not working at all.
    I tried these steps.
    1. From RSO2 went to Extract structure. Edit Mode-> append structure.
    2. Appended required fields and activated both append structure and extract structure.
    3. Back to datasource and Save it.
    4. Came out of transaction RSO2. ( latter Logged of system )
    5. after re login - RSA6 selected given Datasource and change. there I could change the selection of HIDE field. ( Even earlier I was not able to do that)
    May be these steps help you out.

  • Getting error back to XI for Asyn Proxy scenario

    Hi All,
        I am working on proxy scenario. i am using fault message type for  rising exception and scenario is asynchronous.  if ther is any application is throwing some exception, now it is not coming to xi. we can monitor it in R3. but i need to rise alert if ther is any application error. is ther any way to get the error back to XI for async proxy scenario...?
    Please help me
    Regard
    Pradeep P N

    Hi
       I will explain my scenario, suppose the message from xi reaches R3 succefully, but due to some back end configuration the data is not getting updated(eg for creating sale order ther should be some back end configuration), in that case the proxy will raise exception and message will get failed in R3,  i can monitor that in SXI_MONITOR in R3 as failed. but for XI it is success, When ever a message is getting failed in R3, i need to rise one exception.
    In XI sxi_monitor i can see it as success, but in message monitoring while monitoring Proxy Bussiness system i can show the status as Apllication error, if iam aable to get this proxy business system in Alert configuration then i think we can rise alert. is ther any way to get proxy business system with Adapter engine and Integration engine.  Please help me....
    Regards
    Pradeep P N

  • Getting error while Configuring NWA for PI 7.1

    Hello All,
    I'm presently working on PI 7.1, trying to configure /nwapi and for that purpose, implementing note # Note 1160261 - NWA for PI: Incomplete Component Tree.
    I'm presently in step # 5 for running Template Installer step -Configuring the Central NWA and getting error "Validation Error: Failed to retrieve CCMS Agents."
    To sort out, i did install CCMS agents for both ABAP & Java stack keeping Solution manager as my central system, although my both agents are running fine, still i'm getting this error, due to which i'm not able to proceed ahead. Please help me, if anyone has come across the same & wat should be the path forward for it.
    Eagerly waiting for some inputs...
    Thanks,
    Anand.

    Hi Anand,
    When configuring NWA for PI, it wants the PI system as CEN. So you have to register the CCMS agents at the PI system.
    With kind regards,
    Henk.
    Sorry for the same remark twice. The Expert Forums were experiencing a little hickup, I suppose...
    Edited by: H. Steenwijk on May 28, 2009 12:22 PM

  • TS1717 i keep getting error r6025 when searching for music.i have downloaded what itunes suggest but no change

    i keep getting error r6025 when searching store.i have downloaded the itunes suggestion but no change

    I was getting -3231 and kept seeing references online about routers and firewalls and connectivity issues.  I merely turned off my WiFi and went hardwired with ethernet and problem solved.  Give it a try and see if it works for you.

  • Remove Appended Structure from standard table

    Hi Experts,
    I have appended a Z structure to table VBAP.
    I want to remove it now. How can I do?
    Rajiv Ranjan

    Hi Rajiv Ranjan,
    to delete the append structure from the database table, follow the points
    1. Goto se11
    2. enter your append structure name.
    3. press delete
    4. It will delete this append,
    also in the original table/structure
    where it is used, AUTOMATICALLY.
    5.now the data base table VBAP is partially active so
    go to tcode se14 and give the table name and click on EDIT button
    and click on ACTIVATE AND ADJUST button.
    then it will work.
    if it is not possible reply to me.
    regards
    sreenivas

Maybe you are looking for