Remove html-formatting

Hello,
is there any Function or other way to remove html-formatting from a string
example
test
i only want 'test' as result
best would be call function that returns string without formatting
thanks very much
Helmut

Hi Helmut,
Please try with following FMs:
SOTR_TAGS_REMOVE_FROM_STRING
HRDSYS_CONVERT_FROM_HTML
SWA_STRING_REMOVE_SUBSTRING
Also, have a look at following threads for more information:
Remove HTML tag
Remove HTML tags from a string
Cheers.

Similar Messages

Apple Mail.app in Leopard removes HTML formatting

Hi,
This is not something I see universally, but in many of my mails (Exchange account, company ID, hence, can't post screenshots), sometimes, Mail.app strips the html formatting! Sometimes, something as simple as a table is missing. All I see is the text that would have been inside it. The background colours, etc in certain mails also sometimes go missing.
Only when someone replies to the same mail and has the original mail included, do I see the formatting!
Also, when I open my mailbox in Thunderbird or a browser, I can see the formatting correctly in the same mail!
Am I missing something here?
Thanks,
Anup

Mail > Preferences > Composing.
You have the option there to send and receive in plain text which will remove all formatting, maybe selected...Change to what you wish to happen

How to remove Pagebreak while printing a Report in Html format

Hi there,
I am printing the Report Output as HTML format and I need to avoid pagebreaks ... Is there any way to avoid.
I did tried PAGESTREAM ... but it prints the next page in a separate file ...
Can anyone give a solution for this !!!
TIA
Vaithy. S

hello,
when you use the output-format HTML or HTMLCSS, oracle reports creates a representation of the layout as it would be created on paper in these formats; therefore there are pagebreaks.
there is no way to switch them off.
regards,
the oracle reports team --pw

HTML Format via Email

When sending output via email in HTML format (from rtf template), all the formating is lost, layout just expands horizontally.
Output is correct when displayed in pdf format.
Also occurs when previewing the output.
Further information:
This is purely a custom rtf template created for remittance report. In the rtf template we have used the filler, we have kept many conditions like if the data spills over to next page based on number of lines,and if the number of data lines is less then also it should align and fit to the table /page etc.
If we remove the filler the output will shrink to half page in HTML page and WE DO NOT want this kind of report output. We need the report output in HTML which should fir to paper size(A4 size) even we have less number of data rows.
Any assistance would be appreciated.
Thanks
Sarah

Thanks for your response.
The customer has updated with the following:
The problem here is the standard program "IBY_FD_SRA_FORMAT module: Send Separate Remittance Advices" sets the output type to HTML if the remittance advice delivery method is "MAIL". Below is the extract from the log file of the program "IBY_FD_SRA_FORMAT module: Send Separate Remittance Advices"
******** EXTRACT BEGIN ********
Since the delivery method is EMAIL, the XML Publisher output type is set to be html.
********* EXTRACT END *********
This causes the following issue: -
The concurrent program ends without generating a pdf output and hence cannot be emailed out as a pdf document.
Action required from you: -
[1] Ensure that the standard program does not default the output type to HTML for email. This should be PDF instead.
[2] Ensure that IBY XDO Delivery, sends the PDF output as an attachment.

Desktopintelligence report in HTML format

Hello Gurus,
I have to schedule a Deski report in HTML format. But when I schedule the report, the html format will will be saved in 'section by section' mode automatically.
Waht properties should I change to save in 'All in one page' mode?
Thanks,
Naveen
Edited by: NR on Apr 30, 2009 8:33 PM

Hi Naveen,
Even I am facing a similar problem while exporting the reports to HTML format. All the sections in the report appear on different pages,and there's no option for getting them on a single page. As of now, there does'nt seem to be a direct solution for this issue, however, I got rid of this problem by using 'Breaks' in my report instead of 'Sections'. For example, if you are having a report which displays section-wise data, and you have applied the section on say, 'Cities' (which means you will get the city-wise data). You can remove the section and drag the 'City' field into the table, and then apply a break on it. You may also enable the option of 'Centre Value Across Break' which would give the report a better look.
Regards,
Alok.

Email smartform in html format

Hello all,
I've been searching SDN for help with creating an email in html format via smartforms. Pavan Bayyapu's blog was really helpful and I've also used program SF_XSF_DEMO_MAIL as the basis for my program. I followed their examples exactly but my emails always appear as a .MTL attachment, never as just the body of the email.
I tried removing the file name from lo_mime_helper->set_main_html and from lo_mime_helper->add_binary_part as suggested by some other folks but I haven't had any success.
Has anyone solved this same issue? Maximum points will be given to helpful suggestions.
Thank you.

<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/59/cd7da407d711d5b66f006094192fe3/content.htm">converting SF to html format</a>
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
regards,
srinivas
*reward for useful answers*

Blank message body when sending or receiving HTML formated emails Exchange 2010

I Have just installed Exchange Server 2010 over the weekend on a customers system. All clients using either Outlook 2003 or 2007 are unable to see any text in the body of emails that are formatted in HTML. If they receive an email formatted as HTML there is no body text, if they send an Plain Text formatted email the recipient sees the text in the body. This problem presents across all Exchange users and affects all HTML formatted emails sent or received since transitioning from Exchange 2007 to 2010. Plain Text and Rich Text email present with no issues. If we import old email via a pst they afre able to see all email text both HTML and plain text. when we access the clients email account via OWA all emails work but then if we go into outlook 2003/2007 and click the email it removes the body text from the email in both the client and OWA have tried Outlook connection issues with Exchange 2010 mailboxes due to RPC encryption requirement
http://support.microsoft.com/default.aspx/kb/2006508 and it made no difference at all.
Thanks
Update: Have just tested further and all pc seem to work ok with either 2003 or outlook 2007 on. The problem only seems to be happening on the remothe desktop services server which has outlook 2007 ( have also tried outlook 2003 with same results)

We have just migrated to Exchange 2010 and have had some blank emails come in to our system. We think we have a reason and fix for
it. Hopefully this helps someone else…
Staffs have their own private mailbox (as you would expect) but also share common mailboxes like "Support" and "Info". When an email came
into the inbox on a shared mailbox, it might be blank. Plain text emails seemed to be okay.
We found that when an email came in, it was readable for about two or three seconds (you need to be setup to send a test and check the inbox quickly - we used Outlook 2007 with the reading pane turned on) and then it blanked out!. We checked the incoming
email by using the arrow keys to select it and then select the email below the new email, if you go back and forth between them you can see the good new email suddenly goes blank.
So send another test, but this time make sure the email is set to “Plain Text”. Our email turned up fine, two seconds latter
it had a NOD32 signature appended to the end of it saying that it had been scanned by NOD32 (you may have seen this kind of note appended to the end of emails before).
What appeared to be happening is that one or more users sitting at their desks in Outlook had different settings configured in NOD32 (they
were supposed to be using the server based profile that we control). We thought we had the server doing the AV work, but several of our client PCs had NOD32 enabled to integrate with Outlook. New items received in the shared Inbox’s were being scanned
by the client PCs and having a signature appended which was mucking up the HTML format of the email and Exchange 2010 blanked them out.
Make sure your AV products aren’t corrupting the email formats causing them to be displayed blank. Try tests using OWA only and don't
access the mailbox using Outlook.
Thanks.

HTML Formatting using SSIS

Hi Forum ,
I need to do cleanup on a column to display clean data by eliminating the various <HTML> in the source. I would like to do a replace using the charindex, but my query becomes too big and i might miss some tags. What would be the best approach removing
the <tags> or formating them to display in correct format? .
Please give me some example if we can format data according to the tags using SSIS components.
DAVID BACKER, JR
L

 11111 Erwin 185th Ter Jersey Gardens, NJ 10156

/* Microsoft SQL Server Integration Services Script Component
* Write scripts using Microsoft Visual C# 2008.
* ScriptMain is the entry point class of the script.*/
// C# code
using System;
using System.Data;
using System.Text.RegularExpressions; // Added
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
 // Method that will be executed for each row.
 public override void Input0_ProcessInputRow(Input0Buffer Row)
 // Replace the value of the message column
 Row.Notes = RemoveHtml(Row.Notes).Replace(" ", " ")
 .Replace("&", " ").Replace("-->", "
").Replace(""", "\"")
 .Replace("<", "<").Replace(":
YES", ": YES ").Replace(": NO", ": NO ");
 // A string method that removes html tags
 // with a regex pattern
 public String RemoveHtml(String message)
 // The pattern for a html tag
 String htmlTagPattern = "<(.|\n)+?>";
 /// ///"<(.|\n)+?>"
 /// ///"(?<=<[^>]*)&nbsp"
 // Create a regex object with the pattern
 Regex objRegExp = new Regex(htmlTagPattern);
 // Replace html tag by an empty string
 message = objRegExp.Replace(message, String.Empty);
 // Return the message without html tags
 return message;
 Ntext Source DataType
I convert the columns to convert(varchar(max),jr.NOTES) as Notes

How assign an HTML format in a Prompt

I want to build а prompt with hierarchy list, so strings are padding by blanks. But OBIEE remove blanks. To avoid this OBIEE issue we must replace blanks on nbsp. But how I may to say OBIEE that the column in html format? It's easy for reports, but how do it for prompts?
Edited by: AnTonic on Dec 22, 2009 6:21 PM

hi,
please look into this
Re: Chane Name(Title) of Delivered Dashboard
here if u select that option you can set html or css for prompt
thanks,
saichand.v

Remove HTML tags from a text area

Hi, here is my problem:
I have a form with a text area item; this item is “Display as Editor HTML standard”. So it is possible to enter formatted text with tags HTML. Then I save the text in a table. In the column the text maintain the HTML tags. Afterwards I can put the text in a report, and I can see the formatted text with the tags HTML interpreted.
But I need also to use that text for other aims, (i.e. sending it in a mail) with the html tags removed.
Is there any way to remove HTML tags from a text item?
Regards
Dario

From http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:769425837805
 FUNCTION str_html (line IN VARCHAR2)
 RETURN VARCHAR2
 IS
 x VARCHAR2 (32767) := NULL;
 in_html BOOLEAN := FALSE;
 s VARCHAR2 (1);
 BEGIN
 IF line IS NULL
 THEN
 RETURN line;
 END IF;
 FOR i IN 1 .. LENGTH (line)
 LOOP
 s := SUBSTR (line, i, 1);
 IF in_html
 THEN
 IF s = '>'
 THEN
 in_html := FALSE;
 END IF;
 ELSE
 IF s = '<'
 THEN
 in_html := TRUE;
 END IF;
 END IF;
 IF NOT in_html AND s != '>'
 THEN
 x := x || s;
 END IF;
 END LOOP;
 RETURN x;
 END str_html;There's also a reqular expression approach that I've not tried. Remove HTML Tags and parse the text out of it

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

PZ11 - REM Statement in HTML format in ESS

Hi
Can we display the Remuneration statement in HTML format instead of the PDF format in ESS? If yes, how do we do that ?
Currently our system is converting the smart_form to PDF and displaying in the PDF through PZ11 transaction.
Thanks

Hi VAB
You need to call BAPI BAPI_GET_PAYSLIP_HTML (FM) to meet your business requirement.
The conversion from ABAP-listobject to HTML will be done via function module WWW_HTML_FROM_LISTOBJECT
Also please notice: Note 425548 says that we must "adapt our list" so that it's layout is
similar to an HTML table. The ESS documentation for renumeration statement says that if we change the form we must also change the HTML templates. The HTML appears to be generated from the form by a "converter routine". Documentation refers to templates HR_PAY_PAYSLIP and HR_PAY_PAYSLIP_PAGE for building the renumeration statement. using SMW0 to see them.
Regards,
Jun

Physical page is not the same in HTML format

I am using Oracle 6i to develop some reports. While running this reports using the developer, the logical page is the same size as the physical page.
When generating the same reports in HTML format the physical pages do not seem to be the same as the logical pages, since the contents of one page is being printed in two pages, whereas using the developer the report will print only in one page. I look at the Layout Model properties and I have set it in the following way :
Layout Main Section
Width : 8.5
height : 11
Horizontal Panels per PAge 1
VErtical Panels per page : 1
Orientation Default
Report Width : 80
Report Height : 66
Any Help will be appreciated

Open you QuickTime movie, go to window and select Show movie properties, select videotrack and change Transperancy (low left) and select Composition in stead of "none - allow dithering" from the drop menu. See if this helps.

Service cannot be reached while sending a smart form in html format

Hello,
I'm trying to send a smart form as email in html format and I'm getting the following error message at the beginning of the message:
Service cannot be reached
What has happened?
URL http://localhost/SAP/BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
Error code:ICF-NF-http-c:100-u:MYUSER-l:D-i:my_test_system:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#PAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#PAGE1-001.page #MAIN.win.AGGR-BILL div#B.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.AGGR-BILL div#F.par{ font-family : "Arial" ; font-size : 8pt ; font-weight : normal ; line-height : 3.39mm ; text-decoration : none ; text-align : left ; clear : both ;}.AGGR-BILL div#L.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.AGGR-BILL div#R.par{ font-family : "Arial" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : right ; clear : both ;}.AGGR-BILL a.AGGR-BILL span#H.char{ font-family : "Arial" ; font-size : 12pt ; font-weight : bold ;}.AGGR-BILL span#I.char{ font-family : "Arial" ; font-size : 12pt ; font-style : italic ;}.AGGR-BILL span#K.char{ font-family : "Arial" ; font-size : 8pt ;}.AGGR-BILL span#M.char{ font-family : "Arial" ; font-size : 10pt ;}.AGGR-BILL span#U.char{ font-family : "Arial" ; font-size : 12pt ; text-decoration : underline ;} div#PROJEKTE.tab@media screen { div#PROJEKTE.tab table.tr{ border-collapse : collapse ;}}@media print { div#PROJEKTE.tab table.tr{ border-collapse : collapse ;}}@media screen { div#PROJEKTE.tab table.tr{ margin-top : -1px ;}}@media print { div#PROJEKTE.tab table.tr{ margin-top : 0px ;}} div#PROJEKTE.tab table.tr div#PROJEKTE.tab .topline{ border-top : 1pt solid black ;} div#PROJEKTE.tab .bottomline{ border-bottom : 1pt solid black ;} div#PROJEKTE.tab .leftline{ border-left : 1pt solid black ;} div#PROJEKTE.tab .rightline{ border-right : 1pt solid black ;}#PROJEKTE.tab #sf--LTYPE1.tr td#C1
and here comes the email's body: bla,bla,bla... bla.
Do you have any idea how can I solve the problem with the css file? Any suggestion is welcome!
Regards,
Jaime

I just solved the problem by activating the service /SAP/BC/BSP/SAP/smart_forms/ through the transaction SICF. So I close the thread!
Jaime

HTML format report for Daily basis Oracle Database health Checkup

Hi All,
Can anyone provide me the script which I can schedule in BAT file to run againt all the database and gather most of the health check related data and present the same in HTML format.
Regards,
Sphinx

Hi,
Database Health report can be obtain from my below link:
http://rafioracledba.blogspot.com/search/label/DBA%20Daily%20activities
It is a detailed one.Make use of point 20 in the above link to get the report you want.Hope it helps.
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Remove html-formatting

Similar Messages

Maybe you are looking for