Remove Local System from Change The System Time

Hello,
Is there any way to remove the Local Service account from policy "Change the system time"?
I created a policy to only give permission for the Administrators and Power Users group, but when I run the AccessChk tool, the result is:
administrators
Power Users
Local System
Regards

> Is there any way to remove the Local Service account from policy "Change
> the system time"?
No. Local System is the "godfather of your computer" and cannot be
restricted.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Preventing local admin from changing root password

Is it possible to prevent a local admin from changing the root password? I would like to set up a computer so that the user has admin rights, but cannot change the root password via a terminal shell to gain root access.

I can't provide you with details, but I'm sure that all you need to do is to edit the sudoers file. It needs to be edited with <visudo> when logged in as root in a Terminal. The location is </private/etc/sudoers>, but you don't need to know that when using <visudo>. From a first look I'd suppose you only have to uncomment the %admin line, but better get some more information. I never did this myself.

How do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards.

How can I change the shipping time from 1-2 weeks to 2 days

How can I change the shipping time from 1-2 weeks to 2 days. Thank you in advance.

Right you are, R_Kelly. Thanks, that did the trick. Ukgaurav also pointed out some choices in the Displays and Cursors Preferences with which I fine-tuned the tool cursor appearance.

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

How to change the defrag times

Can you change the defragmentation times because i dont want to leave my laptop on all night?

MartyFromTauranga wrote:
Can you change the defragmentation times because i dont want to leave my laptop on all night?
There is no need to leave the MBook on over night. There are a couple of clean-up-scripts starting if the system is idle (cpu usage is under a specific value) and if system starts up / shoot down.
If you (like I do) let the system run for weeks, by only putting the Mac to sleep state, it could be necesary to let the Mac run to idle state (first close all unneeded applications) every two weeks or so for a while.
The HFS+ filesystem needs no "defrag" as HFS+ optimizes the filestructure "on the fly" when deleting or adding files to the drive.
HFS+ uses a number of optimizations to the allocation algorithms in an attempt to defragment files while they are being accessed without a separate defragmenter.
If (very unlikely in normal operations) the filesystem does become fragmented, the only way to defragment it is to use a 3rd Party tool; or to wipe the hard drive completely and install the system from scratch.
Cheers - Lupunus

Restrict Local Administrators from change Network property

In my office Environment we are using Development machines on which every developer has Local Administrator rights on there system. We are using 2 Internet lines in which one line is fast speed and another one is slow one, due to slow internet speed on
second line some peoples manually change the Gateway IP and switch from slow to Fast one, to stop this we need to restrict those users from changing IP on windows 7. Only domain Administrator can able to change that Setting. we are using Window Server 2008
R2 as ADDS. is there any way to stop this using domain group Policy? or Local security policy?

Hi Siddheshrsawant,
Sorry, we can’t restrict local administrators from changing network property via Group Policy, and this is by design.
For confirmation, the following thread also focused on the similar issue and can be referred to for information.
Unable to lock down Network Connections settings with Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/32045ab3-0496-4f5e-b2c2-71ba0f2ed073/unable-to-lock-down-network-connections-settings-with-group-policy?forum=winserverGP
Best regards,
Frank Shen

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

Change the start time of track 1

Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

CATS - Status after changing the approves times

Hi gurus,
Scenario -
1) Employee enters time through ESS with profile lets say ZESS
2) MAnager apporves the times
3) HR administrator can change the apporved times, if they want to lets say with another profile ZADM
What happens:
1) What would be the the statf us of the records changed by Time administrator after approval by Manager. Would it be in process or approved.
CAC2 - I did not find any settings under the cats profile definition where we can determine this behaviour
Requirement
we want the status to go to In process so that manager approves ti again
Any ideas if ther eis any setting to do this.
regards
Raj

Hi,
The status of the records changed after approval becomes 50 "changed after approval". you can view the records and its status in table CATSDB. Goto SE16 and give CATSDB.
For those records which have been changed, system will automatically create new records in CATSDB table with status 20 "released for approval".
Now, these records will be picked up for approval by the manager.
The connection between the old and the new records is the reference counter field in CATSDB. Check the fields "counter" and "reference counter" for the connection.
I hope this helps.
Thanks
Manoj Krishna

How do I stop GoLive from changing the location of my CSScriptLib.js file?

How do I stop GoLive from changing the location of my CSScriptLib.js file?
I am making rollovers and want my CSScriptLib.js to be in the same folder as my HTML files.
Every time I edit the rollovers GoLIve recreates the path of the CSScriptLib.js to file:///Users/xxx/Library/Preferences/Adobe/GoLive/Settings8/JScripts/GlobalScripts/CSScr iptLib.js so it won't work when uploaded. I always need to edit my HTML before uploading. All I want it to say is src="CSScriptLib.js" as the default.

The site file is a database that keeps track of all your assets (and much more), including the scriptLib file. As soon as the page is saved (when you use the site file and it's open) the link will be change to the correct path that will work on the server.
If you're not using the site file you might as well use a text editor, since most of GL functionality is gone.

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

How to change the screen time on 2330c.....

is there any option to change the screen time from center to a top end.....?
Solved!
Go to Solution.

Date and timeSelect Menu > Settings > Date and time.To set the date and time, select Date and time settings.To set the formats for date and time, select Date and time format settings.To set the phone to update the time and date automatically according to the current
time zone, select Auto-update of date & time (network service).
here is online guide which may contain more info
http://nds1.nokia.com/phones/files/guides/Nokia_2330_classic_en.pdf
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

On Game Center how do you stop players from seeing the last time you have played a game?

on Game Center how do you stop players from seeing the last time you have played a game? Or the last time you signed in.

hello, this should be addressed in a later version of firefox. as a workaround in the meanwhile you could try this: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

How to stop screen from changing size every time I touch cursor

how to stop screen from changing size every time I touch cursor

If you're using Windows 8 it has to do with the mouse. Go to Control Panel - Mouse - Click Pad Settings. Uncheck pinch zoom then appy.

Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

Is there a way to change the specific time when subscriptions to podcasts are downloaded? I seem to be locked in to 6:29 pm.
Thanks.

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

Remove Local System from Change The System Time

Similar Messages

Maybe you are looking for