Remove SOAP-ENV tags from xml RECEIVER RESPONSE payload (XSL needed?)
Hi
I need to remove some tags from the payload of a RESPONSE message in a SOAP webservice scenarion.
The received payload looks like this:
before -
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://tempuri.org/what.xsd">
<SOAP-ENV:Body>
<ns:crejob-resp>
<response-data>
<Result>0</Result>
</response-data>
</ns:crejob-resp>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
after it should look like this
after -
<?xml version="1.0" encoding="UTF-8"?>
<crejob-resp>
<response-data>
<Result>0</Result>
</response-data>
</crejob-resp>
I was thinking of using XSL as a "pre-burner" step before my mapping program but need help to XSL on this.
Hope somebody can help
Cheers
I am sorry to be such a pain in the a..
But I still get the wrong result (with your first option, 2nd option is not working):
<?xml version="1.0" encoding="UTF-8"?>
<crejob-resp>
<response-data>0<Result>0</Result></response-data>
</crejob-resp>
Hope u can help again
and also my source can look like: (unbounded on response-data)
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://tempuri.org/what.xsd">
<SOAP-ENV:Body>
<ns:crejob-resp>
<response-data>
<Result>0</Result>
</response-data>
<response-data>
<Result>1</Result>
</response-data>
<response-data>
<Result>2</Result>
</response-data>
</ns:crejob-resp>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Edited by: Bowie on Jul 2, 2009 3:08 PM
Similar Messages
-
Remove XML tags from XML element in Oracle
Hi,
I have a requirement where I have to remove all the xml tags from xml element with banks, currently I'm using replace 4 times to replace all different types of xml tags, performance is really bad. is there any better option to remove xml tags from xml data leaving the actual data. please find the example data below.
select
TO_CLOB(REPLACE(REPLACE(REPLACE(REPLACE
('<Concatcolumn><ConcatGroupID>MyText Data goes here </ConcatGroupID><ConcatGroupID>Data agian</ConcatGroupID></Concatcolumn>','<ConcatGroupID>'),'<Concatcolumn>'),'</ConcatGroupID>',';'),';</Concatcolumn>')) AS Concatcolumn
from dual
**************Out put*************
MyText Data goes here ;Data agianOne way is to use xquery:
SQL> with t as
select xmltype('<Concatcolumn>
<ConcatGroupID>MyText Data goes here </ConcatGroupID><ConcatGroupID>Data agian</ConcatGroupID></Concatcolumn>'
) xml from dual
select xmlquery('string-join(//text(), ";")' passing xml returning content).getclobval() xml from t
XML
MyText Data goes here ;Data agian
1 row selected. -
How do I remove the acronym tags from menu items in Business Catalyst?
Hello, can anybody answer this for me please? Not having any success googling or foruming it so far.
How do I remove the acronym tags from menu items in Business Catalyst?
Thanks in advance
GrantThese are titles and in the dynamic menu will be the item description per item.
These are actually important though and you do not really want to remove them but make them better and reword them other then the same as the link test. These are good for the user experience as well as SEO. A bot knowing a description of a link and where it is going coupled with the URL's and the title of an anchor are all important aspects of your sites SEO. -
Conversion from xml to csv using xsl
hi i am converting from xml to csv using xsl i am getting the extra junk character(space) in the csv file.below i written the xml file and xsl file
xml file
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<?xml-stylesheet type="text/xsl"?>
<DOCUMENTS>
<FILE>
<DOCUMENT>
<BUSINESS>finance</BUSINESS>
<PROGRAM>CM</PROGRAM>
<PROJECT>Testing Area</PROJECT>
<NAME>121940~1.doc</NAME>
<TEXT>SQL</TEXT>
<LINK>http://www.sql.org/</LINK>
</DOCUMENT>
<DOCUMENT>
<BUSINESS>finance</BUSINESS>
<PROGRAM>CM</PROGRAM>
<PROJECT>Testing Area</PROJECT>
<NAME>121940~1.doc</NAME>
<TEXT>Information</TEXT>
<LINK>http://google.com/</LINK>
</DOCUMENT>
<DOCUMENT>
<BUSINESS>finance</BUSINESS>
<PROGRAM>CM</PROGRAM>
<PROJECT>Testing Area</PROJECT>
<NAME>121940~1.doc</NAME>
<TEXT>Configuration</TEXT>
<LINK>http://msdn.microsoft.com/</LINK>
</DOCUMENT>
</FILE>
</DOCUMENTS>
xsl file
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="text" indent="yes"/>
<xsl:template match="DOCUMENTS">
<xsl:text>Business,Program,Project,DocumentName,Textforlink,Hyperlink</xsl:text>
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="FILE">
<xsl:value-of select="DOCUMENT/BUSINESS"/>
<xsl:value-of select="','"/>
<xsl:value-of select="DOCUMENT/PROGRAM"/>
<xsl:value-of select="','"/>
<xsl:value-of select="DOCUMENT/PROJECT"/>
<xsl:value-of select="','"/>
<xsl:value-of select="DOCUMENT/NAME"/>
<xsl:apply-templates/>
</xsl:template>
<xsl:template match="DOCUMENT">
<xsl:value-of select="','"/>
<xsl:value-of select="','"/>
<xsl:value-of select="','"/>
<xsl:value-of select="','"/>
<xsl:value-of select="TEXT"/>
<xsl:value-of select="','"/>
<xsl:value-of select="LINK"/>
</xsl:template>
</xsl:stylesheet>
for converting to csv i am using java program.
please go through it.<xsl:value-of select="','"/>That's not the correct way to output a literal comma. Just write the comma directly, or use xsl:text. And don't put in those line breaks either. You can reduce the rule for FILE to something like this:
xsl:template match="FILE">
<xsl:value-of select="DOCUMENT/BUSINESS"/>, <xsl:value-of select="DOCUMENT/PROGRAM"/>, <xsl:value-of select="DOCUMENT/PROJECT"/>, <xsl:value-of select="DOCUMENT/NAME"/>
<xsl:apply-templates/>
</xsl:template> -
How to remove empty tags from XML
Hello,
I have a XML file which contains some empty tags and some values with "?". I need to remove all empty tags and tags which have a value "?".
Sample Data:
<a>
<b></b>
<c> Hello </c>
<d>world ?</d>
<e>oracle</e>
</a>
Expected result:
<a>
<c> Hello </c>
<e>oracle</e>
</a>
Thank you for your time.
Thanks,
Edited by: 850749 on Apr 7, 2011 6:25 PMDear Odie,
May I make your example a bit more complicated by adding an additional complexType, please:
---Original ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
</DEPT>
----- New ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
<EMPLMNT_HISTORY>
<DEVISION>1</DEVISION>
<FROM_DATE>2011-01-01 </FROM_DATE>
<TO_DATE></TO_DATE>
</EMPLMNT_HISTORY>
</DEPT>
Your solution works perfectly for <SALARY>, but how would you suggest also to deal with <TO_DATE> ?
Massive thanks for your help!
N.B. Just to emphasise, in my case I have 3 levels (complexType > complexType > complexType) and many elements and I would like to know if there is any generic option to say
to remove all the empty elements from the result, as it causes to the SSJ (Systinet) Webservice to crash. -
Remove Cdata tags from XML body
Integration Broker message is being publish from the Peoplecode in the savepostchange event of a page......So basically when they click on the save, it is being published.
ok, I have title field on a page and the user entered special character "&" and there is a HTML definition being used and that definition goes through parsexmlstring function.
For example In the cust_title field on a page the user entered " A & B"
I went to the HTML definition and wrapped cust_title field in the CDATA tags like <![CDATA[<Title>%BIND(:8)</Title>]]>
Now , there is no error, XML is getting published. But in the xml message
I see Cdata tags and string is appearing exactly as it was entered.....
But how can I get rid of the Cdata tags from the XML message?Dear Odie,
May I make your example a bit more complicated by adding an additional complexType, please:
---Original ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
</DEPT>
----- New ----
<DEPT>
<EMPID>1</EMPID>
<EMPNAME>Martin Chadderton</EMPNAME>
<SALARY>??</SALARY>
<SALARYq></SALARYq>
<EMPLMNT_HISTORY>
<DEVISION>1</DEVISION>
<FROM_DATE>2011-01-01 </FROM_DATE>
<TO_DATE></TO_DATE>
</EMPLMNT_HISTORY>
</DEPT>
Your solution works perfectly for <SALARY>, but how would you suggest also to deal with <TO_DATE> ?
Massive thanks for your help!
N.B. Just to emphasise, in my case I have 3 levels (complexType > complexType > complexType) and many elements and I would like to know if there is any generic option to say
to remove all the empty elements from the result, as it causes to the SSJ (Systinet) Webservice to crash. -
Deleting Message Type name and namespace tag from XML payload
Hi Gurus,
Need help. My payload looks like this
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_O_sss xmlns:ns1="http://sap.com/xi/tm">
- <Job>
<Field name="xxxx" value="" />
<Field name="xxx" value="" />
<Field name="xxx" value="" />
</Job>
</ns1:MT_O_sss>
But The soap webservice is expecting it in
<?xml version="1.0" encoding="utf-8" ?>
- <Job>
<Field name="xxxx" value="" />
<Field name="xxx" value="" />
<Field name="xxx" value="" />
</Job>
I have to remove the message type name and namespace tag.
So how can I achieve this. I am sending this payload using a Receiver Soap Adapter. Please help. I am kind of stuck.hi,
you have to simply add one module in your communication channel
that is XMLAnonymizerBean
you can refer below for help:
Remove namespace prefix or change XML encoding with the XMLAnonymizerBean
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
hope it helps.
regards,
ujjwal kumar -
Remove the unnecessary tags in XML using PL/SQL
Hi Friends
from the below XML, its generate by a complex SQL query, Now we need to remove all the object type tags, and all the empty tags.
Version - PL/SQL Release 11.2.0.3.0 - Production
<MajorLine>
<MAJOR_LINE_OBJECT_TYPE> -- Need to remove these Objects types showing in the XML
<LINEID>143424538</LINEID>
<ITEMNAME>TC-ABC-123</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
<SERVICELINE/> -- Need to remove all the Empty tags
<MINORLINE>
<MINOR_LINE_OBJECT_TYPE> -- Need to remove these Objects types showing in the XML
<LINEID>143424799</LINEID>
<ITEMNAME>TCC-abc</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
<SERVICELINE/>-- Need to remove all the Empty tags
<MINOR_MINOR_LINES>
<M_MINOR_LINE_TYPE> -- Need to remove these Objects types showing in the XML
<LINEID>143424798</LINEID>
<ITEMNAME>SF15-abc-xyz</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
</M_MINOR_LINE_TYPE>-- Need to remove these Objects types showing in the XML
</MINOR_MINOR_LINES>
</MINOR_LINE_OBJECT_TYPE>--Need to remove these Objects types showing in the XML
</MINORLINE>
</MAJOR_LINE_OBJECT_TYPE>-- Need to remove these Objects types showing in the XML
</MajorLine>
i tried one of the queries posted in this blog ,PFB to remove the empty tags , but it didnt work for me unfortunately. Please help.
PFB
WITH sample_data AS (
SELECT xmltype('<MajorLine>
<MAJOR_LINE_OBJECT_TYPE>
<LINEID>143424538</LINEID>
<ITEMNAME>hijk</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
<SERVICELINE/>
<MINORLINE>
<MINOR_LINE_OBJECT_TYPE>
<LINEID>143424799</LINEID>
<ITEMNAME>efg</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
<SERVICELINE/>
<MINOR_MINOR_LINES>
<M_MINOR_LINE_TYPE>
<LINEID>143424798</LINEID>
<ITEMNAME>abc</ITEMNAME>
<ITEMPATH>78245</ITEMPATH>
<QUANTITY>10</QUANTITY>
</M_MINOR_LINE_TYPE>
</MINOR_MINOR_LINES>
</MINOR_LINE_OBJECT_TYPE>
</MINORLINE>
</MAJOR_LINE_OBJECT_TYPE>
</MajorLine>') xmldoc
FROM dual
SELECT deleteXML( t.xmldoc
, '/MajorLine/*[.="" or contains(.,"?")]'
) as result
FROM sample_data t
My email ID is [email protected] -- You can reach me
thanks in advance ... Arun thomas THey Odie. Great to see you again, the query is
SELECT XMLELEMENT (
"MajorLine",
major_line_object_type (
oola_major.line_id,
oola_major.ordered_item,
oola_major.header_id,
oola_major.ordered_quantity,
CAST (
MULTISET (
SELECT oola_ser.line_id,
oola_ser.ordered_item,
--oola_ser.header_id,
oola_ser.ordered_quantity,
CAST (
MULTISET (
SELECT oola_ser2.service_start_date,
oola_ser2.service_end_date,
oola_ser2.service_duration
FROM oe_order_lines_all oola_ser2
WHERE oola_major.line_id =
oola_ser2.service_reference_line_id
AND oola_ser2.header_id =
oola_major.header_id) AS service_period_table_type)
FROM oe_order_lines_all oola_ser
WHERE oola_major.line_id =
oola_ser.service_reference_line_id
AND oola_ser.header_id = oola_major.header_id) --As of now excluding cross order service line
AS SERVICE_TABLE_TYPE),
CAST (
MULTISET (
SELECT oola_minor.line_id,
oola_minor.ordered_item,
oola_minor.header_id,
oola_minor.ordered_quantity,
CAST (
MULTISET (
SELECT oola_ser1.line_id,
oola_ser1.ordered_item,
-- oola_ser1.header_id,
oola_ser1.ordered_quantity,
CAST (
MULTISET (
SELECT oola_ser3.
service_start_date,
oola_ser3.
service_end_date,
oola_ser3.
service_duration
FROM oe_order_lines_all oola_ser3
WHERE oola_minor.line_id =
oola_ser3.
service_reference_line_id
AND oola_ser3.header_id =
oola_major.
header_id) AS service_period_table_type)
FROM oe_order_lines_all oola_ser1
WHERE oola_minor.line_id =
oola_ser1.service_reference_line_id
AND oola_ser1.header_id =
oola_major.header_id) --As of now excluding cross order service line
AS SERVICE_TABLE_TYPE),
CAST (
MULTISET (
SELECT oola_minor_m.line_id,
oola_minor_m.ordered_item,
oola_minor_m.header_id,
oola_minor_m.ordered_quantity
FROM oe_order_lines_all oola_minor_m
WHERE oola_minor.line_id =
oola_minor_m.link_to_line_id
AND oola_minor_m.header_id =
oola_major.header_id) --As of now excluding cross order service line
AS m_minor_line_table_type)
FROM oe_order_lines_all oola_minor
WHERE --oola_minor.top_model_line_id=oola_major.line_id
oola_minor.link_to_line_id = oola_major.line_id
AND oola_minor.header_id = oola_major.header_id
AND oola_minor.item_type_code != 'SERVICE') AS MINOR_LINE_TABLE_TYPE)))
AS "XMLOutput"
FROM oe_order_lines_all oola_major
WHERE oola_major.line_id = 143424538 AND oola_major.link_to_line_id IS NULL;
can we rewirte it to get the desired out put ..
Desired output is Just remove the Object_type tags and empty tags coming in the output xml.
The previous issues i mentioned are not solved yet . actually will update the challenges ..
Odie .. thanks.. again -
How do I remove the blue tag from my HD?
Since upgrading to Mavericks I have had a blue 'dot' tag next to my HD's name on my desktop.
I have figured out how to assign and remove tags from folders generally, but I just cannot find how to remove the blue dot from the main HD on the desktop.
For example, if I right-click on the desktop icon I can see that the blue tag is selected in the tag options, but it just cannot be deselected there at all.
If I right-click on the desktop HD icon and select 'Get Info' I can then see the top box in the Get Info panel has 'Blue' showing in it, but there appears to be no way to get rid of it there either.
How can I switch of this unwanted blue tag on my HD icon?Looks like all you guys out there have all been a little too busy to post a reply to this one, but that's fine because life can be a little too full at times.
The good news is that I found a solution, quite accidentally really. I simply renamed the HD Drive (Get Info > Name & Extension). The new name appeared under the drive icon without the blue tag. Job done. I am guessing that the blue tag was just a bug that was a hangover left by upgrading from a previous version of OS X, but whatever it was it has now gone.
Thank you. -
How to retrieve SOAP Original Header from request and response
Hi,
Does anyone know how to retrieve SOAP original header from SOAP request and response? I surfed but I'm able to see only the retrieval of SOAP custom headers via BPM mediator. Can anyone please help me regarding this? Also Please tell me how to check the headers in the Enterprise Manager.HI Chandra,
Thanks for your suggestions.
But i think in my case we do not want to get the complete list. We still want to get only 100 items initially and then if the user would scroll down he/she would see more items. But we already need to know the total number of items for the purpose of showing a message to the user. For e.g. Total issues (515), but the table would initially show only 100 and then another 100 after scroll. So setting the size litmit to max would not help.
And to be able to use the $count you mentioned, we have to still make another oData service call which we do not want.
But as i mentioned there is already a property named "__count" in the response of the bindItems() method call and i see that it has correct count but not sure how to retrieve it inside the controller. Thanks.
Regards,
Ashish -
Removing the [Spam] tag from non Spam emails
I have a few emails which come through to my Inbox with [Spam] in the subject field. These emails are not Spam. How do I remove the [Spam] tag and tell the system that they are not Spam.
If the system thinks they are Spam, why don't they go straight into the Spam folder?Hi orange_dude,
Check out this link for more info on how to filter spam. Let me know if this helps.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Remove SOAP Header Element from ALSB Proxy Service Response
I've got a client of one of my ALSB Proxy services that needs the SOAP header element removed from the response. I'm struggling to find a way to do that with a WSDL-based proxy service. Do I need to change my service to an Any XML Service or is there an easier way?
At the same time, could you please also tell me how do i convert a XML Response from a business service to a SOAP Response in Proxy Service.
My client is expecting a soap response and the backend gives back only the XML Response
Thanks in advance!!
~Swagat -
Remove tags from XML using transformation
Can anybody tell me how to remove empty tags using xsl transformation.
<App_Data App="MOD" Name="Metadata_Id" Value="SP1282"/>
<App_Data App="MOD" Name="Metadata_Spec_Major_Version" Value=""/>
<App_Data App="MOD" Name="Metadata_Spec_Minor_Version" Value=""/>
My XML will have tags similar to above. My requirement is to remove all tags having attribute Value="". How can i achieve this using transformation.
Thanks
KrishYou need to add the xsi:nil="true" attribute to your xsl-construct to be able to ommit the xml-element which are empty.
To be able to do this you need to add a choose-when-otherwise xsl construct inside your mapping file to test for ""-values.
The xsi:nill='true' isn't supported in the transform-activity yet, you need to add this attribute manually inside your xsl-mapping file.
Kind regards,
Nathalie -
How to pick up values of particular tag from XMl file & store into an array
Hi , i m using sax parser to read below xml file.
<dvd-list>
<dvd>
<id>001</id>
<title>Bollywood</title>
<name>Lord of the rings</name>
<length>150</length>
<actor>Jonathan Austin</actor>
<actor>Nicole Kidman</actor>
</dvd>
<dvd>
<id>002</id>
<title>Hollywood</title>
<name>Taare Zamin pe</name>
<length>200</length>
<actor>Amir Khan</actor>
<actor>Darsheel</actor>
</dvd>
<dvd>
<id>003</id>
<title>Bollywood</title>
<name>Matrix reloaded</name>
<length>150</length>
<actor>Mickel</actor>
<actor>Hally Berry</actor>
</dvd>
</dvd-list>
& i want to store it into an arraylist .
I declared arraylist a class var .
i want to store all ids into an arraylist ...
below is my code public void endElement (String namespaceURI, String localName, String qName, Attributes atts)
throws SAXException
if(qName.equals("id"))
for (int i = 0; i < atts.getLength (); i++) {
list.add(i,atts.getValue (i));
// showData ("</"+qName+">");
}not working ... plz help me in this regard
thanks a lotthanks , my id tag has no attribute...
but sir again i m facing 1 problem
to pick up values of tag i wrote below code public void startElement (String namespaceURI, String localName, String qName, Attributes atts)
throws SAXException
System.out.println("localName"+qName);
str=qName;
public void characters (char buf [], int offset, int len)
throws SAXException
String s = new String(buf, offset, len);
System.out.println("char>>"+s);
s.trim();
if(str.equals("id"))
list.add(s);
if(str.equals("name"))
list.add(s);
if(str.equals("title"))
list.add(s);
if(str.equals("length"))
list.add(s);
if(str.equals("actor"))
list.add(s);
public void endElement (String namespaceURI, String localName, String qName, Attributes atts)
throws SAXException
}here my list size shud be 5 ideally but it is showing 30!!!!
also debug stmt sysout(char>>+s); is showing series of
char>> ...it means charactes(0 method is being called several times ...while my xml contains
<dvd-list>
<dvd>
<id>001</id>
<title>Bollywood</title>
<name>Lord of the rings</name>
<length>150</length>
<actor>Jonathan Austin</actor>
</dvd>
</dvd-list>
plz help me in this regard to understand this flow....
thanks a lot in advance -
How to view SOAP header generated from XML Gateway ?
Hi All,
I am using XML Gateway integrate EBS and trading partner using web services.
Currently I am having problem with including wsse authorization information in the outbound message of EBS.
I am able to view the payload in the transaction monitor but not able to check the SOAP header of message.
How to view the current SOAP header generated by EBS and/or include the wsse information which are required by recipient trading partners ?
Thanks in advance for your help.
Regards,
RamNo, this XML is the whole XI message and it is not sent by the SOAP (axis) adapter. If you want to see exactly what is sent, try checking it with the TCPGateway tool as advised on the SOAP FAQ note
[Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597]
Under question "Q: How can I trace the whole message?". Otherwise, on SXMB_MONI, try selecting the PAYLOAD item on the left menu and, on the payload on the right, right-click and select "VIEW SOURCE".
Maybe you are looking for
-
Selection tool not lining up with cursor
Hi Forum On numerous occassions, when using cs4 and the selection tools, lasso and magic wand, amongst others, the selection point, is out of allignment with the cursor. What is wrong, and how do i sort the problem out? Thanx for your help.
-
I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB
-
Privacy - remove all website data doesn't work
Hi all, when I choose privacy > remove all website data - it doesn't work and all the data remains.... (details says many are in cache) Q: why is this and how to I remove the data?
-
This may not be the appropriate place but since MS Office X is creating problems for use in Tiger.......running 10.4.7, cannot use word or excel. Selection of a document format causes the program to close. Validated my fonts and all are ok......It's
-
Thinkpad T510 Windows 7 No wireless adapter found & device manager network adapters exclamations
Lenovo owners, I was wondering if you could help. I'm having issues with my laptop(Lenovo thinkpad T510) all of a sudden and cannot pinpoint a solution and it seems my laptop is getting progressively slower. One day upon startup I could not obtain a