Remove the existing value in Search item for FK02

Hi,
How to remove the current field value in the serach item1 for the transaction fk02, and want to insert a value in number of records.
Thanks in advance .
Viji.

Hi,
Do it using BDC recording of FK02.
Regards,
Sujeet

Similar Messages

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

How can i remove the bar (where i search for websites) when i full screen for my macbook pro

how can i remove the bar (where i search for websites) when i full screen

ohhh k i got it but thats not what i am looking for, so when i full screen i want it to be like fully full screen like when i watch a movie i want nothing but the movie on the screen and when i bring the mouse up then the tab shows again thats what exactly I'm asking about.

How to remove the default value of "Inventory No." in Equipment Master

Hi Experts,
Need your advise
How to remove the default value for the field "Inventory No" in Equipment Master? It will goes back to the default value(TRANSIT) when i delete or change the value.
Thank You
Best Regards

i think you cannot default this value from configuration, check is there any screen variant exist for your transactions IE01/IE02, else may be any user exit is active on the equipment master transactions.
Take help of your ABAPer and verify the above.
Praveen.

Setting Default Values in Search Criteria for COSTCENTER

Hi ALL,
I need Help for setting default values in search criteria for COST CENTER.
Basically the issue is when creating a Shopping Cart, i need to assign a COST CENTER at Item level under COST ASSIGNMENT Tab.
While searching the cost center i need to default the following fields in my search criteria based on the Login User :
1. Controlling Area,
2. Language Key.
Please suggest some solution.
Thanks & Best Regards,
Surya

Hi Vani,
Sorry for the delay reply and Thanks a Lot for your timely support......I would like confirm once again is the name of the BADI is <b>bbp_f4_read_on_exit</b> or <b>bbp_f4_read_on_entry</b>. In this BADI i've not found a method to default Controlling Area. Can you please suggest me which method i can use.
Thanks & Regards,
Surya

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Cannot set the default value of an item in the detailed table

Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
Mohamed

I think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed

Read two CSV files and remove the duplicate values within them.

Hi,
I want to read two CSV files(which contains more than 100 rows and 100 columns) and remove the duplicate values within that two files and merge all the unique values and display it as a single file.
Can anyone help me out.
Thanks in advance.

kirthi wrote:
Can you help me....Yeah, I've just finished... Here's a skeleton of my solution.
The first thing I think you should do is write a line-parser which splits your input data up into fields, and test it.
Then fill out the below parse method, and test it with that debugPrint method.
Then go to work on the print method.
I can help a bit along the way, but if you want to do this then you have to do it yourself. I'm not going to do it for you.
Cheers. Keith.
package forums.kirthi;
import java.util.*;
import java.io.PrintStream;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.IOException;
import krc.utilz.io.ParseException;
import krc.utilz.io.Filez.LineParser;
import krc.utilz.io.Filez.CsvLineParser;
public class DistinctColumnValuesFromCsvFiles
public static void main(String[] args) {
    if (args.length==0) args = new String[] {"input1.csv", "input2.csv"};
    try {
      // data is a Map of ColumnNames to Sets-Of-Values
      Map<String,Set<String>> data = new HashMap<String,Set<String>>();
      // add the contents of each file to the data
      for ( String filename : args ) {
        data.putAll(parse(filename));
      // print the data to output.csv
      print(data);
    } catch (Exception e) {
      e.printStackTrace();
private static Map<String,Set<String>> parse(String filename) throws IOException, ParseException {
    BufferedReader reader = null;
    try {
      reader = new BufferedReader(new FileReader(filename));
      CsvLineParser.squeeze = true; // field.trim().replaceAll("\\s+"," ")
      LineParser<String[]> parser = new CsvLineParser();
      int lineNumber = 1;
      // 1. read the column names (first line of file) into a List
      // 2. read the column values (subsequent lines of file) into a List of Set's of String's
      // 3. build a Map of columnName --> columnValues and return it
    } finally {
      if(reader!=null)reader.close();
private static void debugPrint(Map<String,Set<String>> data) {
    for ( Map.Entry<String,Set<String>> entry : data.entrySet() ) {
      System.out.println("DEBUG: "+entry.getKey()+" "+Arrays.toString(entry.getValue().toArray(new String[0])));
private static void print(Map<String,Set<String>> data) {
    // 1. get the column names from the table.
    // 2. create a List of List's of String's called matrix; logically [COL][ROW]
    // 3. print the column names and add the List<String> for this col to the matrix
    // 4. print the matrix by inerating columns and then rows
}

Remove the decimals value

Dear All,
Any Idea to remove the decimals value from the text ? my parameter declare as Character type.
eg : i want from 10000.000 become 10000
thanks

Dear All,
Any Idea to remove the decimals value from the text ? my parameter declare as Character type.
eg : i want from 10000.000 become 10000
thanks
hi,
for this we can use two method one is,
data : value type p decimals 0.
value = '10000.000'.
write : / value.
Output is = 10000
Second method,
data : value type i.
value = '10000.000'.
write : / value.
Output is = 10000
If u use packed decimals
data : value type p decimals 1.
value = '10000.000'.
write : / value.
Output is = 10000.0

How do I remove the acronym tags from menu items in Business Catalyst?

Hello, can anybody answer this for me please? Not having any success googling or foruming it so far.
How do I remove the acronym tags from menu items in Business Catalyst?
Thanks in advance
Grant

These are titles and in the dynamic menu will be the item description per item.
These are actually important though and you do not really want to remove them but make them better and reword them other then the same as the link test. These are good for the user experience as well as SEO. A bot knowing a description of a link and where it is going coupled with the URL's and the title of an anchor are all important aspects of your sites SEO.

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Want to remove the default value of a column in a table

HI
I have a table called User_ind. This table columns have default values as 'n' like
create table user_ind(
ind_num varchar2(1)
,group_allowed varchar2(1) default 'y'
,view_allowed varchar2(1) default 'y'
now i want to remove the default values How can i procede with this.
Urgent .
Thanks in advance.
Chaitanya.

In Oracle 9i you cannot remove the DEFAULT, you can only change it to null:
alter table user_ind modify group_allowed varchar2(1) default null
You can check it using this one:
select table_name,column_name,data_default
from user_tab_columns
where table_name = 'USER_IND'
Best Regards
Krystian Zieja / mob

How do I remove the space key on my keyboard for cleaning underneath?

How do I remove the space key on my keyboard for cleaning underneath?

Don't. It will void the warranty. Take is to an Apple store or an AASP and have them do it.

How to set the default value of an item type DATE PICKER to the day of yest

Hi
How to set the default value of an item type DATE PICKER to the day of yesterday ?
Thank you very much !
Christian.

Hi Christian,
Have a look at this thread Re: Default the Date Picker to Today
It covers this issue in detail.
Regards
Paul

Remove the existing value in Search item for FK02

Similar Messages

Maybe you are looking for