Remove the report location from reports.

How can I remove the report location from reports?
Thanks.
Andrea.

Hi.
If you sue the resubmit function, on Report menÃ¹, the new notification contains the Report Location with the report's URL.
Andrea.

Similar Messages

How to remove the Failure Chain from report header?

I want to remove the Failure Chain from the report header. Failure chain displays only the 1st test which is failed rather than displaying all failed teststeps. so i want to remove this failure chain section from the report header.
Please can anyone suggest me how to remove that. ?
thanks & regards
sameer kulkarni

Hi Sameer,
I am an Application Engineer at National Instruments and will try and help you with your enquiry.
Am I right in thinking you want to be able to display all the failed steps displayed in the failure chain and you are using a Test Stand version 2 or later?
As default Test Stand only reports the first test that failed in the failure chain. However, it is possible to expand the failure chain to show all failed steps. Below is included a KnowledgeBase article that will highlight the process for doing this:
http://zone.ni.com/devzone/cda/tut/p/id/4563
Please try the above steps and let me know if this solves your problem. If you require any further assistance please get in touch,
Regards,
Aaron. E
Applications Engineer Team Lead
National Instruments
ni.com/support

How to remove the buttons coming from report program?

Hi All,
I need to remove the buttons from an iview which is a sap transaction. when i execute the report program which uses a ldb (PCH) shows a selection screen having all the buttons.
We have created variants for this.Now i want to remove the buttons which are coming from the report program.how to do this ?
Lakshmi.

Goto sicf ->sap->bc->gui->sap->its->
open Webgui application
in the GUI Config enter the following parameters.
~noHeaderOkCode = 1
~webTransactionType = EWT.
All buttons can also be removed by ~webgui_simple_toolbar =0 ..
Also now open the trancsaction of the program form SE93 for which you want to hide
the Menu bar, in its properties select the EASY WEB TRANSACTION radio button.

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated

Hi,
When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated, I get the following unhandled exception:
************** Exception Text **************
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: Instance validation error: '2' is not a valid value for Microsoft.PerformancePoint.Scorecards.SqlReportViewData.SqlReportViewDataServerMode.
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write1_SqlReportViewDataServerMode(SqlReportViewDataServerMode v)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write3_SqlReportViewData(String n, String ns, SqlReportViewData o, Boolean isNullable, Boolean needType)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write4_SqlReportViewData(Object o)
   --- End of inner exception stack trace ---

Hi,
According to your post, an error occurred when you integrate SQL Server Reporting Services with SharePoint.
1. Please check the steps as the link below:
http://technet.microsoft.com/en-us/library/ff724283(v=office.14).aspx
2. Try to clean the configuration cache on all of your SharePoint servers and re-tested.
http://blogs.msdn.com/b/josrod/archive/2007/12/12/clear-the-sharepoint-configuration-cache-for-timer-job-and-psconfig-errors.aspx
Best Regards
Dennis Guo
TechNet Community Support

Removing the Statistical Price from VA05

Is there a way that you can remove the statistical pricing from the VA05 report? I need to have the statistical pricing so I can not remove that from the item category. However, we use the VA05 report for looking at item level material to still be shipped and also dollar expected value on the line items. This is causing a discrepancy due to the statistical value shows up. I have searched the forum and also google...but to no avail. We are using ECC6. Your direction is greatly appreciated.

There is a user exit available for VA05, wich can be used to add another column and show whatever information is needed in it. You might want to also review the pricing configuration and see if the statistical conditions need to be excluded from the totals/subtotals. Also you could set it up so that the number needed is put into one of the subtotal fields. This would facilitate reporting, printing in forms, etc.

How can I remove the Demo Viewer from my MacBook?

How can I remove the Demo Viewer from my MacBook?

Drag it to the Trash.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

Subject in Email is always "Report sent from Report Builder"

We run Forms 6.08 in C/S - architecture.
Forms calls reports:
ADD_PARAMETER(pl_id, 'SUBJECT',TEXT_PARAMETER, 'Please read appending pdf' );
add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER, 'Mail');
Run_Product(reports, 'MY_Report', SYNCHRONOUS, BATCH, Filesystem, pl_id);
This works: Lotus pops up and a Email is initialized with a pdf appended.
But the subject isn't filled in properly. There is always a constant text: "Report sent from Report Builder"
How can I control the subject?
Is it possible to fill in some text into the Email-body?
Wolfram

Hi,
Please find my comments below :
1. Subject is coming properly in EN but for DE taking the subject from standard task , BASIC DATA tab, Abbrevatio or Name ...
which i am not able to rectify. i am not required to translate in DE , have to send email as it is in EN. but subject is only missing
and everything is working fine. Can you please suggest me here ?
Ans. Your problem here is not clear...Is this a Work Item or mail ?.. Is your subject missing with Work Item in DE ?...
2. For the (sent) From email address instead of email something like WF_USER , i have to display like below :
densapwfadmin
Ans. Are you using talking about Extended notification here?... or just about mail step in your workflow?...
Regards
Gautam

How do I remove the SD card from my Mac?

How do I remove the SD card from my MacBook Air?

First, you should "unmount" the loaded drive from the operating system. You can do this in Finder, or you can Command-Click the desktop icon and select "Eject". Wait for the icon to disappear from Finder or the desktop, then simple pull the SD card from the slot.
To unmount/eject the drive in Finder, scoll to the drive in the left shaded collumn of a finder window, until you locate the drive uner the heading, "devices". Then click the tiny eject icon to the right of the drive listing.

Generate Reports Automatically From Report Server

Hi all,
Can anyone please give me some clues on how to generate reports automatically from report server? e.g. generate daily sales reports on everyday 11:00pm.
Thank you.

You can use scheduling feature of reports.
You need to give in cmd line
schedule=schedule_param
Refer in [     Publishing reports to web - 10G ] (see link below)
the command line param - "schedule"
http://download-uk.oracle.com/docs/html/B10314_01/pbr_cla.htm#641338
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

Removing the business area from the WBS element

Hi Experts,
I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
Now I want to remove the business area from WBS element.
Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
But still Business area field is grayed out for that WBS element.
Could you please let me know how to remove the business area in this case ???
Regards,
Pradip

Hi,
Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
Create new wbse with correct BA & then create pr & po.
Regards,
Sandeep

I had an iphone. I have a new iphone and no longer use the old one. How to do remove the old one from my icloud account?

I had an iphone 4 on Sprint. I switched to Verizon and purchased a 5S. Kept the same phone number and affiliated the new phone to my existing icloud ID. How do I remove the old device from my icloud ID?

and this if not already done
iCloud: Remove your device from Find My iPhone

HT3702 how can i remove the authorization hold from my card...

how can i remove the authorization hold from my card

You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

Remove the report location from reports.

Similar Messages

Maybe you are looking for