Removing file system from meta devices in solaris 10

hi,
I have created a file system on meta device in solaris 10 using below command
newfs /dev/md/rdsk/d110
now i want to remove file system to make the meta device free, required command to remove file system ?
Regards
Zeeshan

Thanks for your response , actually i have performed the below steps to release the space from mount point /u05 which i want to make the space as raw device so that i can use it for ASM , so my question is that how can i unformat the file system so that it can be a raw device.
umount /u05
metaclear d110
(Now i have the below two metadevices 500gb each which i want to use as raw device so that i can allocate it to ASM (Automatic Storage management). So how can we make it as raw device ??
/dev/dsk/emcpower17a
/dev/dsk/emcpower17a

Similar Messages

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

How to Remove Business System From SLD

Hi Experts,
I Created Business System For Web As ABAP.
While Removing Business System From SLD Means I am Getting the Following Error.
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please Let me know How to Remove it from SLD.
Regards
Khanna

HI Khanna
Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
If you deleted from everywhere then it should not give that message.
Try after refresh cache using SXI_CACHE.
Finally Delete the BS from SLD
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

I accidentally removed my iPhone from manage devices in my iTunes account. How do I get back on as a device to use my account?

I accidentally removed my iPhone from manage devices in my iTunes account. How do I get my iPhone 5s back on as a device to use my account?

Hi jakefrombishop,
If you changed that old ID to your current ID using Manage your Apple ID, try the following to see if it will accept your current password:
1.     Go to Manage your Apple ID and sign on with your current Apple ID and password. EDIT the ID and change it to the old email address. This is temporary. Do NOT verify it, do NOT change the password: Apple - My Apple ID
2.     Now on the iPhone, where it is asking for your password to turn off Find My iPhone, type in your current password
3.     Go back to Manage your Apple ID and sign on with the old email address and your current password. EDIT the Apple ID back to your current email address. You may need to verify it again.
Fingers crossed!
GB

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

HT200158 How do you to access Microsoft windows 7 files systems from OSX mountain lion

http://support.apple.com/kb/HT4697 describes how to enable access to Microsoft windows file systems from an OSX lion system.
Mountain lion does not have this entry.
Now that I have a mac with Mountain LIon installed,
how do acces the files on a Microsoft windows 7 system that I have previously accessed?

Well as I pointed out in my post, "Sadly, my Text Edit documents are still all there, every single time I opened them and made a small change, there is another copy stretching all the way back to the day I installed Mountain Lion." so if you can explain to me how July 26 - Aug 16 is a week, I will concede that it is a good idea. Short of that, no I have been capable of making my own backups since I was 16 years old (16 years ago) I don't need my computer to endlessly do it for me in a way I am completely unable to shut off. That's what I have external hard drives, flash drives, a DVD burner, Drop Box, E-mail (as in emailing copies to myself) and icloud for. If I am doing something and I don't have access to a single one of those options, I don't know why I brought my computer with me in the first place. And I don't see how you can say it's an illusory gain in disk space, hundreds of copies of text documents, garageband files, Final Cut files, Motion Files and basically any program that makes files onto my comptuer that I can myself make incremental changes to, those all need to be stored somehow. Again, if you can explain to me how July 26 - Aug 16 is a week, I will agree with you that that is a good thing because IF it only saved for a week, it wouldn't be an issue. Sadly, no matter how many links you post, I still have text edit backups stretching from today back to July 26. They're not going away and I have no reason to beleive any other file I edit is going to go away either since they haven't been. They're all there eating up HD space and this imaginary "week" limit is simply not coming into effect. I hate it and there needs to be a simple way to simply shut it off. I didn't spend hundreds of dollars on external drives just for my main hard drive to be filled up with hundreds un useless, undeletable backups of stuff I already have backed up.

HT204406 What's the best way/order with which to remove itunes match from my devices?

Itunes Match is too much trouble for what it's worth, particularly after the ios 6 changes. It seems a little difficult to remove it permanently from my devices. Anyone have any advice on the matter?

Turn it off on your computer you sync with.
Settings > Music on your iOS device.

HT4191 How do I get to "When prompted, select Delete Notes to remove the duplicates from the device."? I can't get to this!

I have duplicate Notes on my iphone 4 (upgraded to iOS 5.1.1) I have followed your instructions to remove the duplicates. How do I get "select Detete Notes" to appear on my Mac? I have connected my phone to my Mac and selected it in iTunes. I clicked the Info pane and deselected the option to Sync Notes. THEN WHAT should I do? How do I get the prompt "Select Delete Notes to remove the duplicates from the device. (I do want to sync them using the over-the-air feature.)

I would try the following:
First sync your phone with iTunes to create a new backup (just in case). When done, disconnect your phone from your computer.
Next be sure that all of your Notes are on your mac (Don't proceed any further if they aren't). If so, turn off iCloud syncing for Notes on your phone go to Settings>iCloud and turning Notes to Off. When prompted choose to delete the notes from your phone.
Next, without connecting your phone to your computer, open iTunes and go to iTunes>Preferences, on the Devices tab check "Prevent...from syncing automatically".
Now connect your phone to your computer, click on the name of your phone when it appears in iTunes on the left sidebar.
Go to the Info tab and under Other check Sync Notes, then further down under Advanced: Replace information on this iPhone, check Notes.
Click Apply at the bottom right to sync your phone. This should sync the Notes from your mac to your phone and you should no longer have duplicate Notes.
Next, on the Info tab uncheck Sync Notes and click Apply, when prompted select to keep the Notes on your phone (haven't tested this step but I believe you will be given the option to keep them on your phone).
Now disconnect your phone from your computer and check the Notes on your phone to confirm that they are still there and that you don't have any duplicates.
Next turn on iCloud syncing on your phone again by going to Settings>iCloud and turning Notes to On.
On your computer, without connecting your phone, go back to iTunes>Preferences>Devices and uncheck "Prevent…from syncing automatically" to re-enable automatic syncing.
That should do it.

Can someone please tell me how to remove music just from my device please? Many thanks. Steve.

Can someone please tell me how to remove music just from my device please? Many thanks. Steve.

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Access linux file system from windows and vice versa

Friends
Do anyone of you have any idea about how to access linux file system from windows using java. Thanx in advance.
Regards
Rakesh

"Accessing" is vague. Do you want to read? write? Both?
Here are two ways I'll mention.
1. Write an ftp client for the "cleint" computer. I beleive java has some framework functions for doing this.
2. Write java RMI client and server to open, read or write, and close a file. Pass a byte array parameter containing each block of data.

I tried to access my books on my IPad through the Kindle app. The message reads Please remove the book from your device and redownload it from your Cloud items if possible. I the problem persists trrey to deregister your applications and reregister it

I tried to access my books on the IPad Mini through the Kindle app. The message reads "Please remove the books from your device and redownload them from your Cloud items if possible. If the problem persists, try to deregister your applications and register it again."

When the Kindle app was updated - none of my books showed up on my iPad. Here is what I did and I did it all on the iPad.
Go to amazon.com
Sign into your account
Tap on - Your Account - in the upper right corner
Tap on Manage your Kindle - next to the Digital Content section on the left side.
Find your books in the next window
Tap on the Actions Icon next to the book title
Tap on deliver to - select your iPad
Go back to your Kindle app and see if it downloads

Restoring root file system from netbackup

Recently one of the hard disk containing root file system in my T2000 got many hard errors suddenly but the system continued to run. I dont have os mirroring. So I took backup of the root file system using veritas netbackup & restored those in the second hard disk. Also installed boot block for the same. I tried booting from the second hard disk & it booted, came to the prompt. But i found that most of the commands are not working. I tried df -h & it gave me error message like "unable to open /etc/mnttab". Is this approach incorrect?
My guess is that it doesnt work as i dint set partition table same for both the disks.

You need to use the baremetal backup/restore options with Netbackup to make backups of your operating system. It's generally recommended that you make a backup of your OS in single user mode, or booted from alternate media, so that you don't make backups of open files.
Another backup method would be to use something like ufsdump for ufs filesystems, or ZFS send/receive
and when you do restore, first boot in single user mode from cd so that you can update the files that still point to the old disk location, like the /etc/vfstab (for ufs) and to update the device paths with a reconfiguration reboot.
Edited by: 3sth3r on Jan 25, 2012 1:04 AM

Cannot remove file menu from split screen monitors.

Hello, I installed the latest update from Apple which was the new Safari 7. I run 2 added monitors with my iMac being the primary. After update installed, both of my split monitors have the file menu on the top of the monitors. I went into the system menu under display and everything is as it should be yet I cannot remove the file menu from my secondary monitors....

Thanks for the info however this still didnt solve the issue. I unselected and closed window but no changes were detected. I re opened the mission control and the box was selected again. I still have the file menues on both secondary monitiors. After i installed the latest update from apple, the one with the new safari update, is when i started having this issue. Everything worked fine before. My computer seems to be runing much slower now and when i click to open safri, it takes about 40 seconds to open safari..On both secondary monitiors, the file menues operate as if they are the main monitor, which my imac should be operating as the main....This is anoying...

Why Can't I Remove iTunes Purchases from my Device?

Now I know this didn't used to be an issue on my old iPhone 3GS, but am just not sure if it's to do with iTunes or the iOS.
Basically, on my phone, I have two playlists that I sync - one is all my music videos, the other is songs that I want to listen to at this moment in time and this **** changes regularly. Now the problem I have is that I recently downloaded some music and video content from iTunes using my iPhone, and after clearing the 'purchased' playlist from my phone and syncing to the pc, I still have the songs I purchased. I initially added the new music videos to my video playlist but quickly realised I had duplicates so have had to delete any of the new music videos from the respective playlist. I have purchased both music and videos before and not had this problem, or am I missing something?
Thanks
Martin

This happens to me too. I sometimes get duplicate purchased songs, the thing that I do is delete one of the duplicate songs. If you accidently delete the purchased content (videos, songs, etc.), your purchased content will be still saved in iCloud. If you buy purchased content on either the iPhone or on iTunes, it will sometimes produce duplicates. I am not sure why, but all you can do is delete one. This should work.
*If you are having issues completely removing purchased content from iTunes, you would have to highlight the song that you want to delete and hit the delete key. When you hit the delete key for purchased content, a box should appear asking if you want to keep the song or delete to the recycle bin. If you want to delete it from the iTunes library completely (I believe from both your iPhone and iTunes library), click on the delete to the recycle bin. When you go into the recycle bin, you will see your purchased content in the recycle bin. On the other hand, if you just want to delete the purchased content from Just the iTunes library and not the song altogether, you would want to hit keep the file. Which ever option you choose, the purchased content will still remain in iCloud, so if you accidentally hit the wrong button the purchased content is still located in your iCloud.

Getting XML data of SSIS Package (which is located in File System) from a query

Hi,
We have around 200 SSIS packages deployed to File System. These pacakges are being scheduled using SQL Agent job.
So, currently I have a list of all the packages and their respective File Path.
Note : **They are NOT deployed to Server**.
Now, my task is to search all the packages which has a specific connection in it.
From the below blog, I got to know we can achieve this by querying the XML data of the SSIS Package.
https://www.simple-talk.com/sql/ssis/-exploring-ssis-architecture-and-execution-history-through-scripting/.
But in the above article they are getting the XML definition of the Package from msdb(as it was deployed to server).
In my requirement, SSIS Packages are in File System. Is there any way to to get the XML definition of these packages using a query.
Please let me know if the above requirement is not clear or if any further information is required.
Thanks
Raksha

Hi Visakh & Praveen,
Thanks for the response.
@Visakh: The query provided by you gives the information about all the connection strings in the package.
@Praveen: The query in the link provided by you lists the values of all the properties of the package like MaxerrorCount, CreatorName, CreatorDate and other properties.
I think, we may have to slightly modify this query to get the connection string values
Praveen, nice to hear from you after a long time and that too in this forum !! :) Hope you are doing good.
Thanks
Raksha

Removing file system from meta devices in solaris 10

Similar Messages

Maybe you are looking for