Cannot remove file menu from split screen monitors.
Hello, I installed the latest update from Apple which was the new Safari 7. I run 2 added monitors with my iMac being the primary. After update installed, both of my split monitors have the file menu on the top of the monitors. I went into the system menu under display and everything is as it should be yet I cannot remove the file menu from my secondary monitors....
Thanks for the info however this still didnt solve the issue. I unselected and closed window but no changes were detected. I re opened the mission control and the box was selected again. I still have the file menues on both secondary monitiors. After i installed the latest update from apple, the one with the new safari update, is when i started having this issue. Everything worked fine before. My computer seems to be runing much slower now and when i click to open safri, it takes about 40 seconds to open safari..On both secondary monitiors, the file menues operate as if they are the main monitor, which my imac should be operating as the main....This is anoying...
Similar Messages
-
How can I remove exportpdf window from my screen?
how can I remove exportpdf window from my screen? It clutters things up and is very annoying
EdI accessed it via reader, thinking it was a free part of Reader, but don’t have a use for it, and now I cannot get it off the screen where it takes up the right-hand 2 inches of my screen as clutter.
Any ideas?
Ed
<removed by admin> -
Howto remove apple icons from home screen
Hello!
How do i remove all icons from home screen (include apples default icons), and just show the application icon for the program that should be used in our warehouse?The icons of the homescreen reflect the top line of those located on your main menu.
So, you will need a different theme that has the features you desire.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cannot remove adobe reader from IE7 version8
Please advise I have tried everything!!
ThanksKeep getting
1606 error.
Posted previous ( cannot remove adobe reader from IE7 version8 in error) -
I cannot remove syncronized photos from my iphone 5 iOS8.1.3
I cannot remove syncronized photos from my iphone 5 iOS8.1.3
The only photos you can delete on the iPhone are in the Camera Roll. If the photos you want to delete are in albums you've synced, you need to unsync them through iTunes.
-
I cannot remove photo library from iPhone 4s? No option or delete for individual photos...HELP!!! Some of the topics list how you should be able to delete them, but cannot.
In response to Ocean20...IT WORKED!!! Thanks a million! I tried 3-4 different suggestions people had posted, but none worked. Thanks again!
-
Cannot remove a song from iTunes list
Hi all!
I cannot remove a song from iTunes->iPhone->Music. I've deleted the song from the iPhone, but it remains in iTunes with a "!" .
I attach a screenshot
Many thanks!!I use iTunes for Win7
-
ON IOS8 UPDATE FOR IPHONE 5C, HOW DO YOU REMOVE RECENTS LIST FROM HOME SCREEN
HOW DO YOU REMOVE RECENTS LIST FROM HOME SCREEN ON IOS8 UPDATE FOR IPHONE 5C
SSettings/mail etc/show in app switcher turn that off
-
I am having problems removing an autocomplete entry from my address bar; I have tried clearing my history, so it's no longer in that, and I do not have it bookmarked either, so it's not getting the URL from that location either. The autocomplete entry isn't even showing up in the drop down menu, so I can't even scroll through that to delete it.
Basically, I want to be able to type "st" and go to "store.steampowered.com"; however, despite numerous times of typing in "st" and then going down into the drop-down menu to choose "store.steampowered.com", the bar continues to autocomplete "steamtrades.com", which is exceptionally annoying because I do not have that website bookmarked, or in my history, yet it continues to autocomplete to that address, which I do not want it to autocomplete to, and cannot figure out how to remove because I've already cleared my history multiple times, do not have it bookmarked, and it is not showing up in the drop down of the address bar for me to go down and force delete it.Did you try to remove some letters from steamtrades.com to see if that bring this entry up in the drop-down list?
If it is not in the history then it might be present with a typed=1 flag indicating that you have typed or pasted it in the location bar.
You can use the SQLite Manager extension in Firefox to inspect the places.sqlite file to see if this entry comes up in the moz_places table.
*SQLite Manager: https://addons.mozilla.org/firefox/addon/sqlite-manager/
<pre><nowiki>SELECT datetime(visit_date/1000000,'unixepoch') AS visit_date, url, title, visit_count, frecency
FROM moz_places, moz_historyvisits
WHERE moz_places.id = moz_historyvisits.place_id AND url LIKE '%steamtrades.com%'</nowiki></pre> -
Cannot remove warning message from screen
I work remotely and use Outlook Web App to access my emails.
Everything works fine other than I always get this warning message:
which I cannot remove as the 'Continue' option is unresponsive to clicks.
Anyone have any ideas how to cure this??
Many thanks.The server has a self-signed certificate, which means that the people in charge of it don't know how to do their job. That's not a problem I can help you with. However, the warning dialog should not be unresponsive.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
This is occuring on my wife's MacBook Pro Retina 15" early 2013 running 10.9.2
I've never run into this problem before, any helpt would be much appreciated.I mean that I cannot move files from folders that are in my dock.
That is, when I try to drag something from my Downloads folder in the Dock to my Desktop, it doesn't go anywhere, but simply remains in the Downloads folder in the Dock.
A restart has cured the problem for a while, but it is not the first time it has happened and I worry it will return. -
I cannot remove embedded barcode from the image. Due to saving compression.
Hi guys,
I recreate a thread to prevent confusing on my previous one. Please only reply to this thread thanks.
Ok, for a start I will give some general description about the application I made.
I had some problem with the image being compressed while it is saved.
Because saving an image will cause it to compress and had its pixel valued changed, I could not successfully remove the bardcode that is embedded inside a image(although some of the pixel value will be returned to original normally). I had placed my code below and will accept any opinion that will help me solve the removal of barcode problem.
What my application does is actually very simple. It will take the pixel value of the area inside the image that will be embed with the barcode first, then it will take the pixel value of the barcode and use the formula (1-alpha * Image pixel value) + (alpha * barcode pixel value) = new pixel value which will contain the barcode that had been embedded inside. The formula works great but when I saved the image the pixel value will change due to compression. On the removal of barcode my application will read every pixel value from the image embedded with barcode (only the area with barcode embedded), then it will go on to read every pixel value of the barcode used for embedding and then use the formula (Embedded image pixel value - (alpha * Barcode pixel value) - (1 - alpha) = original pixel value. But due to the reason that compression will change some of the pixel inside the saved image to drop in its value, the result from the removal formula will be negative and hence caused my result image to become wierd as it will red colors instead of original color on some of its pixel. I tried saving under PNG format which people said to be lossless compression but the result is still the same.
So I need to ask you guys for opinion or help me find the part where I actually did wrongly and caused the image pixel value to change.
Thanks. Please proceed and read below for the codes that I used. It is messy and I will sort it out later.
When alpha is set as 1 the barcode will appear to be overwrite onto the image. But when alpha is set as 0.1 the barcode will appear to be transparent and almost seems to be not there on the image when embedded.
This is the code I used to retrieve image pixel when embedding:
public static int[] getImagePixelValue(BufferedImage image, int x, int y){
//Create an array to store image RGB value
int[] imageRGB = new int[3];
//Get height and width from input image
int imageWidth = image.getWidth();
int imageHeight = image.getHeight();
//Get raw RGB value from image
int imageValue = image.getRGB(x, y);
//Convert image raw RGB value
int imageRed = ((image.getRGB(x, y) >> 16) & 0xff);
int imageGreen = ((image.getRGB(x, y) >> 8) & 0xff);
int imageBlue = image.getRGB(x, y) & 0xff;
//Input the converted RGB value into the array
imageRGB[0] = imageRed;
imageRGB[1] = imageGreen;
imageRGB[2] = imageBlue;
/*//Print out the pixel value to check
System.out.println("Image red pixel: "+imageRGB[0]);
System.out.println("Image green pixel: "+imageRGB[1]);
System.out.println("Image blue pixel: "+imageRGB[2]);*/
//Return image RGB value
return imageRGB;
}This is the code I used to retrieve barcode pixel for embedding:
public static int[] getWatermarkPixelValue(BufferedImage watermark, int x, int y){
//Create an array to store watermark RGB value
int[] watermarkRGB = new int[3];
//Get height and width from input watermark
int watermarkWidth = watermark.getWidth();
int watermarkHeight = watermark.getHeight();
int watermarkValue = watermark.getRGB(x, y);
//Convert watermark raw RGB value
int watermarkRed = ((watermark.getRGB(x, y) >> 16) & 0xff);
int watermarkGreen = ((watermark.getRGB(x, y) >> 8) & 0xff);
int watermarkBlue = watermark.getRGB(x, y) & 0xff;
//Input the converted RGB value into the array
watermarkRGB[0] = watermarkRed;
watermarkRGB[1] = watermarkGreen;
watermarkRGB[2] = watermarkBlue;
/*//Print out the pixel value to check
System.out.println("Watermark red pixel: "+watermarkRGB[0]);
System.out.println("Watermark green pixel: "+watermarkRGB[1]);
System.out.println("Watermark blue pixel: "+watermarkRGB[2]);*/
//Return watermark RGB value
return watermarkRGB;
}This is the code I used for merging the image pixel and barcode pixel to get the embedded pixel value:
public static int[] getEmbeddedPixelValue(int[] imagePixelValue, int[] watermarkPixelValue, double alpha){
//Create a object to hold embedded pixel value
int[] embeddedRGBValue = new int[3];
//Change image pixel value into double calculating equation
double imgRedValue = (double) imagePixelValue[0];
double imgGreenValue = (double) imagePixelValue[1];
double imgBlueValue = (double) imagePixelValue[2];
//Change watermark pixel value into double calculating equation
double wmRedValue = (double) watermarkPixelValue[0];
double wmGreenValue = (double) watermarkPixelValue[1];
double wmBlueValue = (double) watermarkPixelValue[2];
//Equation for embedding image and watermark together
double embeddedRed = ((1.0 - alpha) * imgRedValue) + (alpha * wmRedValue);
double embeddedGreen = ((1.0 - alpha) * imgGreenValue) + (alpha * wmGreenValue);
double embeddedBlue = ((1.0 - alpha) * imgBlueValue) + (alpha * wmBlueValue);
//Changing embedded value from double to int
int embeddedRedValue = (int) embeddedRed;
int embeddedGreenValue = (int) embeddedGreen;
int embeddedBlueValue = (int) embeddedBlue;
//input the embedded RGB value into the array
embeddedRGBValue[0] = embeddedRedValue;
embeddedRGBValue[1] = embeddedGreenValue;
embeddedRGBValue[2] = embeddedBlueValue;
//Return embedded pixel value
return embeddedRGBValue;
}This is the code where I used for the embedding process:
else if(target == embedButton){
String xCoordinate = JOptionPane.showInputDialog(embedButton, "Enter coordinate X", "When you want to embed the watermark?", JOptionPane.QUESTION_MESSAGE);
String yCoordinate = JOptionPane.showInputDialog(embedButton, "Enter coordinate Y", "When you want to embed the watermark?", JOptionPane.QUESTION_MESSAGE);
int xValue = Integer.parseInt(xCoordinate);
int yValue = Integer.parseInt(yCoordinate);
int wCounter = 0;
int hCounter = 0;
//Create file object to be used in embedding and removing watermark
File inputImage = new File(imagePath);
File inputWatermark = new File(watermarkPath);
//Convert string into double for calculation of embedded pixel value
try {
alphaDouble = Double.valueOf(alphaValue).doubleValue();
catch (NumberFormatException nfe) {
System.out.println("NumberFormatException: " + nfe.getMessage());
try{
//Define selected image as testPic and make java read the file selected
BufferedImage image= ImageIO.read(inputImage);
BufferedImage watermark= ImageIO.read(inputWatermark);
BufferedImage testing;
//Get height and width value from the selected image
int imageWidth = image.getWidth();
int imageHeight = image.getHeight();
//Get height and width value from the selected barcode
int watermarkWidth = watermark.getWidth();
int watermarkHeight = watermark.getHeight();
int totalWidth = watermarkWidth + xValue;
int totalHeight = watermarkHeight + yValue;
//Use nested for loop to get RGB value from every pixel that the barcode will be embedded in the selected image
if(totalWidth <= imageWidth && totalHeight <= imageHeight){
for (int h = yValue ; h < totalHeight; h++){
for (int w = xValue; w < totalWidth; w++){
int[] imagePixelValue = getImagePixelValue(image, w, h);
int[] watermarkPixelValue = getWatermarkPixelValue(watermark, wCounter, hCounter);
int[] embeddedPixelRGBValue = getEmbeddedPixelValue(imagePixelValue, watermarkPixelValue, alphaDouble);
setRed(image, w, h, embeddedPixelRGBValue[0]);
setGreen(image, w, h, embeddedPixelRGBValue[1]);
setBlue(image, w, h, embeddedPixelRGBValue[2]);
wCounter++;
if(wCounter == watermarkWidth){
wCounter = 0;
hCounter++;
else{
JOptionPane.showMessageDialog(embedButton, "The watermark cannot be embedded at the coordinates.");
tempImage = image;
imageIcon = new ImageIcon(tempImage);
labelImage.setIcon(imageIcon);
imagePanel.add(labelImage);
container.add(imagePanel, BorderLayout.CENTER);
setVisible(true);
System.out.println("Embedding completed");
catch(Exception errorEmbedding){
//If there is any error, the try and catch function will tell you the error
System.out.println("The following error occured: "+errorEmbedding);
}This is the code I use to save the image that had been embedded with the barcode:
else if(target == saveAction){
JFileChooser chooser = new JFileChooser();
FileNameExtensionFilter filter = new FileNameExtensionFilter("JPG & GIF Images", "jpg", "gif");
chooser.setFileFilter(filter);
chooser.setCurrentDirectory(new File("."));
int returnVal = chooser.showSaveDialog(getParent());
if(returnVal == JFileChooser.APPROVE_OPTION) {
String name = chooser.getSelectedFile().getAbsolutePath();
//Create a string instant to hold outputImage path name
String saveFile = chooser.getSelectedFile().getName()+"."+fileType;
//Create file output to decide what name will be used to save the file
File outputImage = new File(saveFile);
try{
//Save the file with the name used
ImageIO.write((RenderedImage) tempImage,fileType,outputImage);
catch(Exception errorSaving){
//If there is any error, the try and catch function will tell you the error
System.out.println("The following error occured: "+errorSaving);
else{
}This is the code I used for removal process of barcode:
else if(target == removeButton){
//Create file object to be used in embedding and removing watermark
File inputImage = new File("removalTesting.jpg");
//File inputWatermark = new File(watermarkPath);
//Used a defined barcode for testing of removing barcode from embedded image
File inputWatermark = new File("barcode.jpg");
/*//Convert string into double for calculation of embedded pixel value
try {
alphaDouble = Double.valueOf(alphaValue).doubleValue();
catch (NumberFormatException nfe) {
System.out.println("NumberFormatException: " + nfe.getMessage());
//Used a defined alpha value for testing of removing barcode from embedded image
//alphaDouble = 0.5;
//Create x and y value for the starting coordinates of barcode embedded in the embedded image
int xValue = 0;
int yValue = 0;
int wCounter = 0;
int hCounter = 0;
try{
//Define selected image as testPic and make java read the file selected
BufferedImage image= ImageIO.read(inputImage);
BufferedImage watermark= ImageIO.read(inputWatermark);
//Get height and width value from the selected image
int imageWidth = image.getWidth();
int imageHeight = image.getHeight();
//Get height and width value from the selected barcode
int watermarkWidth = watermark.getWidth();
int watermarkHeight = watermark.getHeight();
int totalWidth = watermarkWidth + xValue;
int totalHeight = watermarkHeight + yValue;
//Use nested for loop to get RGB value from every pixel that the barcode had been embedded in the embedded image
if(totalWidth <= imageWidth && totalHeight <= imageHeight){
for (int h = yValue ; h < totalHeight; h++){
for (int w = xValue; w < totalWidth; w++){
int[] imagePixelValue = getImagePixelValue(image, w, h);
int[] watermarkPixelValue = getWatermarkPixelValue(watermark, wCounter, hCounter);
int[] removedPixelRGBValue = getOriginalImagePixelValue(imagePixelValue, watermarkPixelValue, alphaDouble);
setRed(image, w, h, removedPixelRGBValue[0]);
setGreen(image, w, h, removedPixelRGBValue[1]);
setBlue(image, w, h, removedPixelRGBValue[2]);
wCounter++;
if(wCounter == watermarkWidth){
wCounter = 0;
hCounter++;
tempImage = image;
imageIcon = new ImageIcon(tempImage);
labelImage.setIcon(imageIcon);
imagePanel.add(labelImage);
container.add(imagePanel, BorderLayout.CENTER);
setVisible(true);
System.out.println("Embedding completed");
catch(Exception errorEmbedding){
//If there is any error, the try and catch function will tell you the error
System.out.println("The following error occured: "+errorEmbedding);
}Sorry if the codes are in a mess, I did not had the time to sort it out yet but most likely do it when I got the removal of barcode done.
Follow this link to have a look of the result I see in my application when I got the barcode embedded into the image I selected:
[http://img356.imageshack.us/my.php?image=beforeremovalresultmg2.jpg]
Follow this link to have a look of the result I see in my application after I got the barcode removed:
[http://img523.imageshack.us/my.php?image=removalresultmx4.jpg]
As you can see from the link, after I remove the barcode from the image. Some of the pixel actually went back to normal in the barcode area when the the barcode is embedded into the image. But some pixel in the barcode area had its value changed due to compression when I save the image file I think.
Anyone can help me find out the problem?
Thanks.KamenRider wrote:
I suspect the problem lies in the code when I save the image. Because people said that PNG was loseless compression but when I saved in PNG some of the pixel went back to normal while some did not. This is obviously the cause from changing of pixel value when I saved the image.You are almost certainly wrong. This is trivially easy to check. Print out the color of a certain pixel immediately before you save it. Open the saved PNG in your favorite image manipulation program and check the saved value of that same pixel. When you re-load the saved PNG, print out the color again. It should be unchanged.
Thanks you for trying to help me spot the problem but the formula is correct. The alpha value i used in my application is used to set the transparency of the barcode that will be embedded in the image. Hence, when alpha = 1 the new pixel value should be the barcode value. ^^The formula isn't wrong, it's just not doing what you think it's doing. Remember that you're working with ints here, not floating point numbers, so they have finite precision. When you case from double to int, fractions are dropped. As morgalr pointed out, your formula is:
(1-alpha * Image pixel value) + (alpha * barcode pixel value) = new pixel value You didn't show us the code for getOriginalImagePixelValue but I imagine it's:
original pixel value = (new pixel value - alpha * barcode pixel value) / (1 - alpha)On a piece of paper, take alpha = 0.9, image pixel = 17 and barcode pixel = 100. Calculate out what you should get for new pixel value and then calculate what you should get for original pixel value. You will find they don't match. -
Cannot copy files to/from external drive
Hi All,
Bit of a cry for help. I run an iMac 3.06 Ghz Intel Core 2 Duo with 10.7.3 and I'm having some serious problems with an external drive. Some history first - I have a large iTunes library (~3Tb) of everytype of media which I stored on an external NAS (iomega StorCenter) with no problems - then this NAS started to report a drive error with imminent failure. I purchased a new DAS (Western Digital) drive and moved all my content from the NAS to the DAS and everything was ok. Then I started to get errors through iTunes about cannot find the file and cannot read the files - and then I couldn't access anything on the drive. At this time I thought this was a different problem because I was running preview Mountain Lion, or there was an actual fault with the disk. After investigation, and coughing out for Data Rescue 3 I found that somehow the entire file structure had been corrupted and all my files had been orphaned. So at this point I had one dying NAS drive and one DAS which wasn't usable and no space to recover any files to.
So - next step was to purchase another external drive (and returned the WD) - this time I went for a G-Raid 4Tb (non-thunderbolt) drive and I've been in the process of recovering files from backups and iTunes. I've had no problems until today when yet again I've started getting errors and now I have problems copying files to/from this G-Raid drive.
Technical details - OS-X 10.7.3 - G-Raid 4Tb formatted as Mac OS Extended (Journaled) - currently showing 1,163 folders and 15,452 files.
Symptoms - using finder drag and drop copy a file from the g-Raid to desktop results in 'The operation can't be completed because the item 'xxx' is in use. - 'The operation can't be completed because one or more required items can't be found (error code -43).' and the copy fails.
Using the cp command I get a 'Resource Busy' error.
However, this is not for all files - I've managed to copy all my books back to the desktop ok, when a couple came up with the above error I tried again and it copied successfully.
I have run Disk Utility - here are the details :-
- 4TB G-Tech - Verify
Verifying partition map for “G-TECH”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
The partition map appears to be OK
Volume (Media) - Verify
Verifying volume “Media”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Unused node is not erased (node = 24190)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 24784)
Checking volume bitmap.
Volume bitmap needs minor repair for under-allocation
Checking volume information.
The volume Media was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
Verify and Repair volume “Media”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 94)
Checking catalog file.
Invalid sibling link
Rebuilding catalog B-tree.
The volume Media could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
and it's just got worse - in getting the info for this post I no longer have access to the drive.
This is the second time this has now happened on two different directly connected drives (USB and Firewire) - which means the problem is elswhere. I've a stack of errors in the system.log file
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:52:46: --- last message repeated 1 time ---
May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:01: --- last message repeated 1 time ---
May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:35: --- last message repeated 3 times ---
May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:50: --- last message repeated 3 times ---
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:55: --- last message repeated 5 times ---
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:52:46: --- last message repeated 1 time ---
May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:01: --- last message repeated 1 time ---
May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:35: --- last message repeated 3 times ---
May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:50: --- last message repeated 3 times ---
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
May 10 17:54:55: --- last message repeated 5 times ---
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
I'm now out of ideas and when I got in touch with G-Tech support I got "Unfortunately the drive seems to have been corrupted. You can try to retrieve the data using third party data recovery software such as Data Rescue 3. You can find the software at a discounted rate at the following page:http://www.thedatarescuecenter.com/gtech-data-recovery-software.html If you have any further questions, please feel free to ask."
any help/advice/pointers very much appreciated as I really don't want to have to start recovering again :-(
Thanks all.Hi Ncat,
I might have had similar problems with yours. Finder stuck at 'Not Responding' while I boot my Macbook Pro with external HDD plugged in, my macbook heats up considerably maybe because it keeps trying to access the external disk. And Finder can only proceed after I unplugged my external hard disk.
So what I did was:
I rebooted my macbook into recovery mode (by holding cmd+R before / during the booting chime
I used the Disk Utility from there (instead of from normal booting)
Then I proceed to with 'Repair Permissions' and 'Repair Disk' for each and every partition of the external harddisk, and also my internal hard disk.
Rebooted after everything's done, and now it seems to work.
I hope that it will work for you -
Sync audio with two different video files to create split screen
I want to sync two different video files to a high quality audio file and create a split screen from there in Final Cut Pro X. Help please?
I'm following along at home, Tom, trying to make sense out of your instructions. (Editorially: This kind of operation is among the reasons I thoroughly loathe FCPX.) This would have been easy in FCP7. Perhaps it's actually the same amount of work (you are describing operations in FCPX I have not bothered to try yet—too scared) but it's far more direct the old way: Find sync points for all three files, stack them up in a timeline, nudge till precisely matched, apply effects.
But I'm glad you're here to help us through this stuff! -
I do my banking online, and have previously been able to print my statements off the website. Since the last update, although the page shows in the browser as normal, the option to print from the drop-down file menu is greyed out and I cannot print anything, even if I try and select a portion. It is not a problem with the website as I can print without a problem in another browser program. This problem has now persisted for quite a while with no resolution over time. How do I get Firefox to allow print from a secure website (I assume that is the problem?) It occurs with more than one secure site (two different banks)
I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.
Maybe you are looking for
-
Error in CRM box after executing client proxy
Hi , I am executing client proxy program from CRM box. It is getting the following error in CRM sxmb_moni I checked the sm59 in CRM box. the RFC connection ( type 3) is configured for XI box (XI1CLNT100_RFC). In SXMB_ADM of CRM box the correspoindin
-
How to make an EditText with CFL act like a system "Item Description" ?
Hello, I have added an EditText with a CFL linked to "lf_items". I want the EditText to act like a system "Item Description" EditText, so that when the user enters a value and presses on CTRL+TAB in it, a CFL event will not be triggered and the focus
-
Wrong Selection for Organisational Units
Hello all, While I am trying to create Quotation, getting pop up for selection for organisational units, which does not belongs to me. I am struggling to know how to solve this for past 2 days, if any one can help, will be greatly appreciated. Regard
-
Open Recent - CS3 Complete File Path
In CS2 my open recent files showed the complete file path. e.g. d:\jobs\clients name\file name.indd. In CS3 it only shows file name without the complete path. Is there a setting to change this or am I stuck with it?
-
Is it possible to add a preloader to show while the graphics are loading?
I created a web site that has quite a few show/hide divs to work with the navigational menu on the left, which I believe is making the site load slowly. Is it possible to add a preloader to show up until the site is fully loaded? The site originally