Removing filter for ALV grid

Hi friends
I am using an ALV grid to display my data. Once i used the filter in grid to filter some datas and go back to selection screen & executed the report again, the filter is still active and not showing all datas. How to avoid this.
Regards
Sathar

Hi Abdul Sathar
I find the solution if you are using ALV OO.
For delete the ALV's filter call the method SET_FILTER_CRITERIA and send the parameter IT_FILTER with a itab empty.
I hope this help you.

Similar Messages

F.01 Summary Report for ALV grid

Hi all,
We have defined our financial statement version (FSV). We have been running tests in transaction F.01, when we choose ALV Tree output the transaction works perfectly.
However, if we choose ALV grid output and then choose "1" in the Summary Report field (highest summary level, only main points of Balance sheet P&L statement should be displayed) the output is not summarized at all.
In short, no matter what number we put in the Summary Report field we always get the same output.
What needs to be done in order to be able to use this summarization control?
Any help will be appreciated.
Juan
Edited by: Juan Carlos Mier Giraud on Jul 8, 2008 4:50 PM

Renata,
Thanks for your help. I am going to need a bit of help to develop the solutions described in the notes you pointed out.
Have you successfully created a summarization for ALV grid output?
I just want to know if it is worthy to devote time to it or just use classic list or ALV tree when appropiate.
Regards

I need simple example for alv grid

hi
i need code for simple example for alv grid.
thanks.

hi bharat,
 this is report with most of the functionality.
report zus_alv_demo_grid .
tables: ekko.
type-pools: slis.
types: begin of t_ekko,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
statu type ekpo-statu,
aedat type ekpo-aedat,
matnr type ekpo-matnr,
menge type ekpo-menge,
meins type ekpo-meins,
netpr type ekpo-netpr,
peinh type ekpo-peinh,
line_color(4) type c, "Used to store row color
end of t_ekko.
data: it_ekko type standard table of t_ekko initial size 0,
 wa_ekko type t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid.
Data declaration for EVENT and PRINT PARAMETER.
data: gt_events type slis_t_event,
 gd_prntparams type slis_print_alv.
data declaration for sorting.
data : it_sortcat type slis_sortinfo_alv occurs 1,
 wa_sort like line of it_sortcat.
data : i_list_comments type slis_t_listheader.
start-of-selection.
perform data_retrieval.
perform user_command.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform build_sortcat.
perform display_alv_report.
end-of-selection.
*TOP-OF-PAGE.
PERFORM top-of-page.
end-of-page.
*& Form build_fieldcatalog
 text
--> p1 text
<-- p2 text
form build_fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
fieldcatalog-do_sum = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " build_fieldcatalog
*& Form build_layout
 text
--> p1 text
<-- p2 text
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for
*when double
 "click(press f2)*
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " build_layout
*& Form data_retrieval
 text
--> p1 text
<-- p2 text
form data_retrieval.
data: ld_color(1) type c.
select ebeln ebelp statu aedat matnr menge meins netpr
peinh from ekpo into table it_ekko.
*Populate field with color attributes
loop at it_ekko into wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
 i.e. wa_ekko-line_color = 'C410'
 ld_color = ld_color + 1.
Only 7 colours so need to reset color value
 if ld_color = 8.
 ld_color = 1.
 endif.
 concatenate 'C' ld_color '10' into wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
 modify it_ekko from wa_ekko.
endloop.
endform. " data_retrieval
*& Form display_alv_report
 text
--> p1 text
<-- p2 text
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
 is_layout = gd_layout
 i_callback_top_of_page = 'TOP-OF-PAGE'
 i_callback_user_command = 'USER_COMMAND'
 i_callback_pf_status_set = 'SET_PF_STATUS'
 it_event = gt_events
 is_print = gd_prntparams
 it_fieldcat = fieldcatalog[]
 it_sort = it_sortcat
 i_save = 'X'
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form user_command
 text
--> p1 text
<-- p2 text
*& Form top-of-page
 text
--> p1 text
<-- p2 text
form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
 wa_header type slis_listheader,
 t_line like wa_header-info,
 ld_lines type i,
 ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
concatenate sy-datum+6(2) '.'
 sy-datum+4(2) '.'
 sy-datum(4) into wa_header-info."todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
 into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
 exporting
 it_list_commentary = t_header
 i_logo = 'GANESH_LOGO'.
endform. " top-of-page
 FORM user_command *
--> R_UCOMM *
--> RS_SELFIELD *
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case r_ucomm.
 when '&IC1'.
 if rs_selfield-fieldname = 'EBELN'.
 read table it_ekko into wa_ekko index rs_selfield-tabindex.
 set parameter id 'BES' field wa_ekko-ebeln.
 call transaction 'ME23N' and skip first screen.
 endif.
 when 'ULHAS'.
 if rs_selfield-fieldname = 'EBELN'.
 read table it_ekko into wa_ekko index rs_selfield-tabindex.
 set parameter id 'BES' field wa_ekko-ebeln.
 call transaction 'ME23N' and skip first screen.
 endif.
endcase.
endform.
 FORM set_pf_status *
--> RT_EXTAB *
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ZNEWSTATUS'.
endform.
*& Form build_events
 text
--> p1 text
<-- p2 text
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
 exporting
 i_list_type = 0
 importing
 et_events = gt_events[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table gt_events with key name = slis_ev_end_of_page
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_PAGE' to ls_event-form.
 append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_LIST' to ls_event-form.
 append ls_event to gt_events.
endif.
endform. " build_events
*& Form build_print_params
 text
--> p1 text
<-- p2 text
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " build_print_params
 FORM END_OF_PAGE *
form end_of_page.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip. write:/40 'Page:', sy-pagno .
endform.
 FORM END_OF_LIST *
form end_of_list.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip. write:/40 'Page:', sy-pagno .
endform.
*& Form build_sortcat
 text
--> p1 text
<-- p2 text
form build_sortcat.
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
append wa_sort to it_sortcat.
wa_sort-spos = 2.
wa_sort-fieldname = 'EBELP'.
append wa_sort to it_sortcat.
endform. " build_sortcat
Rewards if helpfull
regards
vijay dwivedi

Need a perfect example program for ALV GRID LIST

first hi to all,i am new to this community.i am still in learning process of SAP.one of my friend suggeted this community and i think this is the perfect place to learn and excel my skill in SAP.so my requirement is a perfect example program for ALV GRID LIST DISPLAY.while i am trying another program,the sysntax is ok but i am not getting any output and it is not showing any error also.hope i will get an answer asap.thank you.

Check [OO ALV Guide Simple|http://wiki.sdn.sap.com/wiki/display/ABAP/OBJECTORIENTEDALV+Guide] and [Easy Reference to ALV|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907]

"Control + F5" standard filter functionality for ALV Grids

Hi all,
After an ALV Grid is displayed on screen there is a standard functionality to filter a selected column.
You can select a column (click on the head) of the ALV, then "Control + F5" and a pop-up appears to insert a value or a range by which the filtration is going to be done.
But a I have problem with a concrete field. It doesn`t seem different on comparison with other fields (CHAR30), but I don`t know why it doesn`t work correctly as others.
Have you had any situation like this ??
Thanks & sorry for my bad english,
Rubè

Hi Frank,
When you are entering 89012 and pressing enter the additional zeros are adding up because of the data type of VBELN We have standard conversion routine attached with this .So when ever u wrtie any text that routine will works.
Can you please check what data type are you using in the internal table that you are binding to the node?
Thanks and Regards,
NSingh
Edited by: Nsingh on Feb 17, 2012 4:52 AM

How to remove repetition in ALV GRID

Dear freinds,
In ALV grid iam getting repetitive for a feild Count (where iam giving count of the no of
records .........i.e if i have four records i have to give 4 but iam getting for all the 4 records as 4,4,4,4 in the output. Can i remove the repetation and get only once
the value as 4 ...........Iam using the data type for count as INT3.
CLEAR l_wa_sort.
l_wa_sort-fieldname = 'COUNT'. "Field name in o/p inttable
l_wa_sort-spos = '2'.
l_wa_sort-tabname = 'fp_i_pyrol_final'. "Output Internal table
l_wa_sort-up = 'X'. "Sort in ascending order
l_wa_sort-down = ' '. "Sort in descending order
APPEND l_wa_sort TO l_i_sort.
However i tried changing the data type to Numc it working but total iam getting as 1 only
not 4 which is wrong since i have four records.
please can any one correct me what i can do in this case.
regards
syamla

hi,
REFRESH the count in the begin of the loop or at end of the loop.

How do I find an event which is triggered on line selection for ALV grid?

Hi,
I'm trying to find an event which is triggered when a user selects a row in the ALV grid. I want to add my own code in to add up the total values of selected lines, but can't find any event which will trigger my method.
I found CLICK_ROW_COL but it's protected so when I try and add a method for it:
PROTECTED SECTION.
    METHODS:
    select_row
        FOR EVENT click_row_col OF cl_gui_alv_grid.
I get the syntax error:
Access to protected event "CLICK_ROW_COL" is not allowed.
Am I using the right event? Am I implementing it correctly?
Any help appreciated. Thanks in advance.
Gill

I chose to solve this by removing the line select buttons from the ALV and replacing them with a checkbox defined as a hotspot. I then used EVENT hotspot_click FROM cl_gui_alv_grid to highlight the line and change my totals on a single click.

Removing scroll in alv grid

Hi all,
Iam displaying alv grid using containers.
It is restricting the ouput to 26 lines and giving scroll bar if i get more records,
What we need to do for avoiding that vertical scroll bar.
Thanks,
Anil.
A suggestion can make a difference.

Hi,
refer to the link
Link: [removing of vertical scroll bar in table control]
thanks
ravi

How to set variant for ALV grid from ABAP

Hello,
I have a program which displays some data with ALV grid. Then after some operation I would like to set different layout for the grid, but not by choosing it manually but by the program. I thought that it would be enough to use the method SET_VARIANT, so I'm setting DISVARIANT structure properly, using SET_VARIANT method and after that I'm calling REFRESH_TABLE_DISPLAY but layout is not changed. What else should I do? Is that possible?
Best regards,
Marcin

Hi,
Check this
* While declaring select-options
parameters: p_vari        like ltdx-variant. " Layout
* then add the following code in
at selection-screen on value-request for p_vari.
perform f_variant_f4 using p_vari.
* Code for f_variant_f4
form f_variant_f4 using p_vari.
* private variables
data : v_exit    type c.
clear gs_variantt.
v_variant_save = 'U'.
call function 'LVC_VARIANT_F4'
    exporting
      is_variant    = gs_variant
      i_save        = v_variant_save
    importing
      e_exit        = v_exit
      es_variant    = gs_variantt
    exceptions
      not_found     = 1
      program_error = 2
      others        = 3.
if sy-subrc ne c_0.
    message i999(yscc) with text-064.    " No Layout Available for F4
endif.
if v_exit is initial.
    gs_variant-variant = gs_variantt-variant.
    p_vari             = gs_variantt-variant.
endif.
endform.                                 " F_variant_f4
* In PBO
    call method grid1->set_table_for_first_display
      exporting
        is_layout                     = gs_layout
        is_variant                    = gs_variant
        i_save                        = 'A'
        it_toolbar_excluding          = i_exclude[]
      changing
        it_outtab                     = i_output[]
        it_fieldcatalog               = i_fieldcat[]
      exceptions
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        others                        = 4.
a®

List header for alv grid using abap objects

Hai all,
I have displayed alv grid in container control using abap objects i.e. using method set_table_for_first_display.
now i need to display list header for this alv grid.
please help me how to create with a sample coding.
Thanks and regards,
Prabu S.

Create a splitter using CL_GUI_EASY_SPLITTER_CONTAINER with a top and bottom half. Put the alv grid in the bottom half. Use cl_dd_document (documented in help.sap.com ) to build the header in the top half. Use events on CL_GUI_ALV_GRID to handle the top-of-list printing.
Or, if available, use CL_SALV_TABLE, and read the documentation on that. When I needed a header for my report, that's what I did. There's plenty of good documentation about if you'll search for it.
matt

About filter in alv grid display

Hi,
   I am practicing on REUSE_ALV_GRID_DISPLAY in that i want to know about how to use some fields like
   *ITFILTER*_
   IT_ALV_GRAPHICS
   IT_HYPERLINK
   IT_ADD_FIELDCAT
   IT_EXCEPT_QINFO

Hi Rock.
I would like to suggest you a couple of references which quite relate to your case,
REUSE_ALV_GRID_DISPLAY - Output of a simple list (single-line)
[SDN - Reference for Using REUSE_ALV_GRID_DISPLAY - Basic Program|alv prog;
[SDN - Reference for Use of IT_FILTER in REUSE_ALV_GRID_DISPLAY |Doubts in ALV?;
[SDN - Reference for use of IT_FILTER with CODE in REUSE_ALV_GRID_DISPLAY|ALV Report;
[SDN - Refernce for Using IT_ALV_GRAPHICS in REUSE_ALV_GRID_DISPLAY|OOPs : SAVE and ALV Display Variant;
[SDN - Reference for Editing a graph in ALV (IT_ALV_GRAPHICS) using REUSE_ALV_GRID_DISPLAY|Edit Graph display ALV list display;
[SDN - Reference for use of IT_HYPERLINK in REUSE_ALV_GRID_DISPLAY|editable fields on ALV grid;
[SDN - Reference including example of IT_ADD_FIELDCAT in REUSE_ALV_GRID_DISPLAY|building top of page in ALV list;
[SDN - Reference for scenario for use of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|Background ID in ALV Grid;
[SDN - Reference for application example of IT_EXCEPT_QINFO in REUSE_ALV_GRID_DISPLAY|PF Status in ALV list.;
Hope That's Usefull.
Good Luck & Regards.
Harsh Dave

Time out error in production server for alv grid report

hi. i have developed alv grid report using nested select statments. when i testing in development server it is giving the output but in production server if i give 4 months then it is showing time out error.please help me out..its urgent.
Thanks in advance.

Hi Manu,
Don't use Nested selected statements.
Use the Following Performance Tuning Options that i have given below so that your problem can be solved.
1) Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2) Avoid for all entries in JOINS
3) Try to avoid joins and use FOR ALL ENTRIES.
4) Try to restrict the joins to 1 level only ie only for tables
5) Avoid using Select *.
6) Avoid having multiple Selects from the same table in the same object.
7) Try to minimize the number of variables to save memory.
8) The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9) Avoid creation of index as far as possible
10) Avoid operators like <>, > , < & like % in where clause conditions
11) Avoid select/select single statements in loops.
12) Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13) Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14) Avoid using ORDER BY in selects
15) Avoid Nested Selects
16) Avoid Nested Loops of Internal Tables
17) Try to use FIELD SYMBOLS.
18) Try to avoid into Corresponding Fields of
19) Avoid using Select Distinct, Use DELETE ADJACENT

Reward Points for sure if you find it useful. 
Regards
Babu

Remove buttons in ALV grid display in ABAP Web Dynpro

Hi,
Sub: ALV grid-->Web Dynpro ABAP.
Request guidance to prevent display of the buttons "Microsoft Excel" and "Print Version" (which provide options to export the ALV grid output into an Excel format document).
Is there a way we could hide this from being displayed on the ALV grid in a Web dynpro ABAP component output?
Thanks very much.
Best Regards,
Adi

Hi Adithya,
really simple solution is to call cl_salv_wd_model_table_util=>if_salv_wd_table_util_stdfuncs=>set_all( abap_false ). This deactivates all ALV functionality.
For individual setting cl_salv_wd_config_table if_salv_wd_standard_functions~set_<x>_allowed.
- Michelle

Filter in ALV grid report

Hi SDN,
I have a ALV grid with columns U1 and U2. I want to filter the records only when U1 = X AND U2 = X . But I need all other combinations of U1 and U2.
Is it possible to make AND operator work in ALV grid filter? If so please let me know. If this functionality is not available directly how to achieve it.
Points will be asigned
thanks

Hi,
 ls_filter-fieldname = 'U1'.
 ls_filter-low = 'X'.
 ls_filter-high = space.
 ls_filter-option = 'EQ'.
 ls_filter-sign = 'I'.
 append ls_filter to lt_filter.
 ls_filter-fieldname = 'U2'.
 ls_filter-low = 'X'.
 ls_filter-high = space.
 ls_filter-option = 'EQ'.
 ls_filter-sign = 'I'.
 append ls_filter to lt_filter.
 call method grid2->set_table_for_first_display
 exporting
 i_default = gc_enable_set_default
 i_save = gc_var_maint_user_specific
 is_variant = gs_variant_item
 is_print = gs_print
 is_layout = gs_layout_item
 it_toolbar_excluding = gt_toolbar_excluding
 changing
 it_fieldcatalog = gt_fieldcat_lvc_item[]
 it_outtab = gt_outtab_item[]
 it_filter = lt_filter[].
a®

Two Internal Tables for ALV Grid

Hi Gurus,
I have a little problem here. I have a report to display cost of production. The rows is about 50 displaying amount in dollars (currency fields). I have this in ALV Grid. But my problem is that the last 4 lines of the report are not currency fields like the others, they are quantity fields.
How can i go about to display this last 4 lines in this ALV Grid. They are from different internal tables off course because of the data type.
In short. I just want to display these 2 internal tables in an ALV Grid.
Thanks in Advance.

Hi,
u can use ALV Block list to display 2 ALV.
Reffer to the below code.
DATA: v_layout TYPE slis_layout_alv.
DATA: ls_print TYPE slis_print_alv.
PERFORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program             = sy-repid
*     I_CALLBACK_PF_STATUS_SET       = ' '
*     I_CALLBACK_USER_COMMAND        = ' '
*     IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = v_layout
      it_fieldcat                      = it_fcat_nlei
      i_tabname                        = 'IT_NLEI_ALV'
      it_events                        = it_event_nlei
*     IT_SORT                          =
*     I_TEXT                           = ' '
    TABLES
      t_outtab                         = it_nlei_alv
    EXCEPTIONS
      program_error                    = 1
      maximum_of_appends_reached       = 2
      OTHERS                           = 3.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = v_layout
      it_fieldcat                      = it_fcat_vbrp
      i_tabname                        = 'IT_VBRP_ALV'
      it_events                        = it_event_vbrp
*     IT_SORT                          =
*     I_TEXT                           = ' '
    TABLES
      t_outtab                         = it_vbrp_alv
   EXCEPTIONS
     program_error                    = 1
     maximum_of_appends_reached       = 2
     OTHERS                           = 3.
ls_print-no_print_selinfos = 'X'.   " Display no selection infos
ls_print-no_print_listinfos = 'X'.   " Display no listinfos
ls_print-reserve_lines      = 2.     " Lines reserved for end of page
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK             = ' '
      is_print                      = ls_print
*     I_SCREEN_START_COLUMN         = 0
*     I_SCREEN_START_LINE           = 0
*     I_SCREEN_END_COLUMN           = 0
*     I_SCREEN_END_LINE             = 0
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER       =
*     ES_EXIT_CAUSED_BY_USER        =
   EXCEPTIONS
     program_error                 = 1
     OTHERS                        = 2

Removing filter for ALV grid

Similar Messages

Maybe you are looking for