Removing original audio from a film clip!Please help
Hi
I am trying to export a film with visuals and sound synced - I have done this within Logic however when I export it (Options>Movie>Export Audio to Movie) I am not presented with an option that allows me to remove the original audio from the film.
I have tried a couple of things and when I play the finished video back it has the new synced music track that I have produced however the original sounds from the pre edited film are present upon playback!
Can someone please tell me how to get rid of these original sounds - It would be greatly appreciated : )
All te best,
Al
if you export, after making your settings, a new box will appear and will ask you, which original audio from the movie you like to keep on the new movie. Just deselect and go on. New video should be without old sounds.
Similar Messages
-
Extracted Audio longer than movie clip, please help...
I was reading some of your FAQ's about extracted audio being
recomposed with a mono instead of stereo for exported audio from a microphone or other mono device, and then importing it back into iMovie after mixing it in Quicktime, to make it stereo (albeit with only mono feed).
My question is this:
I extract the audio from the clip that I am running, and it is fine and good while within iMovie, however, once I drag and drop it to my desktop, and open it with quicktime and either play it or export it as mono to get it to play through both speakers, it uses the original
length of audio not the edited version that i pull from imovie. It is very frustrating, and I am not sure why it keeps doing this.
While it is in iMovie, the audio and video match, and are synched. But, when I export it, for some reason, it exports the original audio from the unedited clip (which has already been deleted!), and I don't know what to do to get it to export just the audio clip as it stands now within iMovie.
Any help would be appreciated.
Thanks,
Chris
G5 Mac OS X (10.4.9)Hi Aesthesia - that is a fact of life of non-destructive editing. When audio is extracted from a shortened, cropped clip, it actually extracts the entire audio from the underlying original source clip. You can test this by extracting audio from a cropped clip, and you will find that you can, by direct editing, extend it back to its original length.
That explains why the audio file when played outside of iMovie plays at the original length. -
Recording audio from an external synth - please help!
Hi
I have an Alesis audio/midi firewire interface and a korg triton and in logic i have recorded the midi data and now need to record the audio into an audio track.
I solo the midi track and arm the audio track for recording, i have set the audio track for input 1 and when the midi notes are played the audio track responds so i know there is a signal but when i hit record, the midi track plays and the metronome sounds as it goes along but nothing is recorded!
Please could someone tell me what i am doing wrong??
Thanks in advance
NickSo let me clarify what I think you are wanting to do. Are you wanting to control the External Synth with the MIDI data coming out of Logic and then running the audio from the Synth back into Logic as an audio track?
-
I'm unable to remove my keyboard from my laptop. Please help.
I'm trying to clean my laptop fan due to overheating. So I tried to disassemble my laptop but i'm stuck at the stage where the keyboard should be removed. My laptop model is HP Pavilion dv6-6144ca and I've looked up its manual on removing the keyboard. The manual (pages 71-72 http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf )
instructs to do the following things to remove the keyboard:
1. Remove the Phillips PM2.5×4.0 screw that secures the keyboard to the computer.
2. Rest the computer on its left side.
3. Open the computer.
4. Insert a screw driver or similar thin tool into the keyboard screw hole, and then press on the back
of the keyboard until the keyboard disengages from the computer.
5. Turn the computer right-side up with the front toward you.
6. Lift the rear edge (1) of the keyboard, and then slide the keyboard (2) back until the keyboard cable is accessible.
I'm stuck on step 4. I've tried pushing a screwdriver and then the stick part of a cotton swab through the hole, but I still can't seem to disengage the keyboard, as it should like it's shown in the manual, from the laptop. I even put a lot of pressure when pushing, but still no luck. So I stopped it because I felt I could break something if I put any more pressure than I already did.
I don't know what to do. I'm not sure what I'm doing wrong. Please help.Hi HP-66, welcome to the HP Forums. I understand that you are having difficulty removing your keyboard. Take a look at this YouTube video between 1:45-2:12 which shows someone successfully removing the keyboard.
HP Pavillion dv6 Complete Disassembly and Reassembly. 2011 Laptop
Let me know if this helps or not.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.
Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al -
Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!
Hello Smile_333
The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
OS X Mountain Lion: Increase disk space
http://support.apple.com/kb/PH10677
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
.
Hey,
If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
If you still have questions on how to do this, they can help you for sure.
I may receive some form of compensation, financial or otherwise, from my video or link. -
How to extract audio from a video clip
I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.
Select the clip in the sequence.
Then command-L to unlink the clips.
Then select the audio and delete.
As a suggestion, two things:
1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
2. Do a search in the pdf manual in the help manual -
Play video from apple tv and audio from macbook , its possible, please ?
play video from apple tv and audio from macbook , its possible, please ?
because i dont have airport and i have a micro plugged to my speakersIf you mean "can I play a video file's video part via AppleTV and the audio part via the Macbook" then the answer is no.
You could probably play the video on AppleTv and also play it on the Macbook and output the audio, but you would have to do this manually, and 2 applications accessing the same video file might cause stuttering playback issues. Additionally you'd have to manually sync the audio and lip sync problems are annoying at the best of times.
If you mean "can I watch a video from AppleTV and play separate music via iTunes on the Macbook", then the answer is yes.
AC -
How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!
Should be able to go into your sound preferences and choose your output device, you can also try downloading Airfoil and try that, it's a pretty cool app.
-
I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent.
There isn't one.
amrzaky wrote:
I can't contact with previous owner s i need another solutoin
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
Problems Sycing multiple Audio tracks with Video. Please help
I have a video clip from my Cannon 70D that im trying to sync with 2 seperate audio tracks from my Zoom. One LR stero track and one wireless mic track.
I select all three clips in the event windo and chose SYNC CLIPS from the clip menu. I take the Syncronized clip and place it in the time line , but when i go to expand audio there are only two track available - The scratch audio from the camera clip and what appears to the LR audio from the Zoom. Hard to tell though because Final Cut renames the Audio for me. I did notice that the sample rate on the video and audio files are different. Could that be the problem?I haven't had much luck with SYNC CLIPS. I suggest you use Multicam instead.
Go to the Inspector and set up your Canon video as Angle 1. Set Zoom XY as Angle 2, and set Zoom wireless mic as Angle 3. Then Select the clips and FILE/NEW MULTICAM CLIP.
http://help.apple.com/finalcutpro/mac/10.1/#ver23c764f1 -
Audio distortion post Build DVD - Please help!
Hi all .. I have edited a wedding video in Premiero Pro and exported my AVI files with Normalised Audio Levels. I imported the AVI files into Encore CS2 and have created my DVD menu. I have also imported high quality mp3 and wav files to use as menu soundtracks. When I preview the DVD, everything sounds fine however when the DVD is created and I playback on my home theatre, the musical soundtracks are distorted! I have tried building a new DVD with audio dolby digital at 256kbps but audio is still distorted.
Please help!Disregard my last question Ruud, I've exported audio from Premiere, Normalised to -6db in good old Cool Edit 2000 and imported in Encore .. much better results. Thanks :)
-
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
I need help to log out from my stolen Ipad. please help.
If you had installed iOS 7 it would be Activation locked, but I see you only have iOS 5. You do have a backup of you iPad files on your computer or iCloud, don't you?
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
How to Find a Missing iPad with FindMyiPad
http://www.dummies.com/how-to/content/how-to-find-a-missing-ipad-with-findmyipad .html
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Check the serial number (located on back/bottom) in this lost/stolen iPad database. However, most owners are not aware of this database and don’t enter the serial number.
Stolen iPad Database
http://www.stolenlostfound.org/online-stolen-ipad-database
Also do a search, using the serial number, on your local Craig’s List. Some users list the serial number of a stolen iPad to thwart the sale of a stolen device.
Cheers, Tom
Maybe you are looking for
-
I can find example using managed code, but I can get it translated to javascript code that I can use. For example, this in managed code: using (SPSite site = new SPSite("http://sharepoint")) SPWeb rootWeb = site.RootWeb; SPList wiki = rootWeb.Lis
-
External hard drives ejecting after iMac wakes from sleep.
External hard drive keeps ejecting after iMac wakes from sleep. TM does not recognise, so have to unplug then re plug in Ext HD, only then TM will perform a back up. Not seamless backups. Help to resolve would be grand
-
Importing and Using Video from Sony DVD Camcorders
I have a Sony DVD Camcorder (DCR-DVD 92) and I have recently shot a lot of footage which is now on my computer. The file extensions are .BUP, .IFO, and .VOB. I am able to import some of the files into final cut but they are shortened to only a few se
-
What roles should be assigned to HR and SD peoples.
Hi all, I have a doubt in security. what roles should be assigned to HR and SD,MM people instead of assigning SAP_ALL and SAP_NEW. I want to restrict all the people giving SAP_ALL and SAP_NEW. How to assign the roles to them and how to authorize
-
Selectable items within an image that has links to other pages
Hello All, I have recently started to learn Dreamweaver CS5 and need some help. I have a jpeg of a floor plan and want the user to be able to click on the different rooms within the floor plan. Once you click on the room it would take the user to a