Selectable items within an image that has links to other pages

Hello All,
I have recently started to learn Dreamweaver CS5 and need some help.  I have a jpeg of a floor plan and want the user to be able to click on the different rooms within the floor plan.  Once you click on the room it would take the user to another page with more details about that room.  For example, I have a floor plan and want to learn more about the Family Room. I would click on the room that says Family Room and it would take me to another page with details about the Family Room.  Any help would be appreciated.
Thanks,
Knowledge Seeker2

I have recently started to learn Dreamweaver CS5 and need some help.
The best approach would be to put DW away, and focus on learning HTML and CSS.  That will make picking up DW again ever so much easier.
I would click on the room that says Family Room and it would take me to another page with details about the Family Room.  Any help would be appreciated.
Use the hotspot tool to apply hotspots to the image.  Link each hotspot to the associated pages by selecting the hotspot and applying the link with the "Link" field of the Property inspector.

Similar Messages

  • Can there be an Home/Index page that has links to sub pages in iWeb?

    How do you set up a Home page with links to other Photo web pages?
    iWeb does a super job creating individual pages full of photos.
    But if I want to have a "Directory" page that kicks off the whole site, how do I do that in iWeb?
    I want to break up my photo pages into groups like:
    Portraiture, Still Life, Life Style etc.

    Thanks Will.
    Most of my site is created in iWeb. I have been messing around with a iCalendar PHP also, to create a nice calendar for the site.
    The Home page is a couple of programs used together.
    1. I drew sketches of the little main street.
    2. recreated the main Street in a GREAT program called SketchUp. it is the most User Friendly 3D program around and their Website has super tutorials to get you up and running in no time - seriously. Then exported it out to Photoshop as a flattened jpg. (I also did this for the individual buildings for my Banners)
    3. In Photoshop, I painted my buildings and gave them some personality.
    4. I originally had an Image Map that I created in ImageReady as my Home page, but that doesn't work for iWeb, so I had to use Flash.
    5. I made a Flash Movie creating my Buttons and Links and Rollovers (Here you have to Plan some, cause you need to what pages you will have at the end and know the URL to the final pages iWeb produces. It is something like ..sitefolder/sitename/Home.html.
    6. Then, I published it as a Quicktime Movie from Flash. You have to Publish as Flash 5 compatible in order to get a quicktime movie. Also, I set up my movie to loop, no controller, and auto play in Flash.
    7. Put it on my Home page. (The controller shows up in iWeb, but not in the final Published Site. (I also do not have to manually change the HTML to autoplay "true" and controller "false" on this particular page. I do have to on others though.)
    Thanks again Will, for your kind words - I have been working very hard on this site.
    Also, don't forget to go to Suzanne's Site 11mystics.com for a lot of information and iWeb tips, tricks, and related links.
    Cobe

  • JSP links to other pages

    Hi,
    I have a web app that does not use a framework. I do try to follow the MVC pattern though by having all requests go through one Controller Servlet.
    I have a Home page jsp, which only has links to other pages. The Home JSP does not have a <form>. Just <a href's.
    These links take the user from the home page to other pages which do work and submit forms. However, some of these pages (jsp's) need to be prepopulated with data. For example, I have a page which gives a random phrase from the Database when clicking on the submit button. But when I first get to the page by following the link from Home Page, it is empty. I want to arrive at the page and have it already gotten the first phrase for me.
    One option I thought of is to have the link from the Home Page which took me to the Random Phrase page, go through the Controller servlet initially and have the Controller servlet, after having done the work of retrieving the phrase redirect to the Random Phrase page.
    If this is the correct approach, how can I accomplish this? How do I have a <a href link in a jsp, redirect to a servlet right away without submitting a form or something?
    Thanks.

    So I put this in my home.jsp:
    <a href="/Household/randomPhrase.php">Random Phrase of The Day</a> In web.xml I have this:
    <servlet>
           <servlet-name>VHController</servlet-name>
      </servlet>
      <servlet-mapping>
           <servlet-name>VHController</servlet-name>
           <url-pattern>*.php</url-pattern>
      </servlet-mapping>According to the above, when I click on this link it should take me to the Servlet's doGet() method.
    However, when I actually click on it, I get the following exception in the browser:
    java.lang.NullPointerException
         com.myapp.servlet.VHController.doPost(VHController.java:47)
         com.myapp.servlet.VHController.doGet(VHController.java:35)All I do in the doGet() method is:
              response.setContentType("text/html");
              PrintWriter out = response.getWriter();
              out.println("URL: " + request.getRequestURL());
              out.println("URL: " + request.getRequestURL());
              out.println("METHOD: " + request.getMethod());Could anyone suggest what the problem may be? Why I am not getting the expected behavior?
    Thanks.

  • Is it possible to print out an image that has had a colorMatrixFilter applied to it?

    Is it possible to print out an image that has had a colorMatrixFilter applied to it?
    I applied the following code to print the ViewStack which contain Image
    printJob = new FlexPrintJob();
    printJob.printAsBitmap = true;              
    printJob.addObject(printJobEvent.viewArea, FlexPrintJobScaleType.SHOW_ALL);
    printJob.send();
    Is there any method to print out image with Brightness/Contrast/Hue/Statuation/Rotate adjusted?  Thanks

    If you give the to-do items due dates within the week in question, then checking the "To Dos with Due Dates" option in the calendar pringing dialog will print them. I have not found a way to get To-Dos without a date in the relevant week to print on a weekly calendar.
    Apple ][   Other OS  

  • Is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?

    Hi there.
    i have set my links to be black in my page properties.  i have somes images that i am using for links and i do not want the to have a black box tracing their outline.  it's messing up my design and tables.  is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?
    see attachment.
    thanks for sharing your knowledge with me.
    gina

    If you would like your NON-linked images to have a border, and only remove the border from linked images then this css:
    a img { border:none; }
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • When I open a PDF page that has links they do not open when I click on them

    When I open a PDF page in Firefox 4.0 that has links, the links will not open when I click on them. If I try that in Safari, or when I had the earlier versions of FF, I had no problem. Is this just a setting issue?

    That is a limitation of iOS. They will view correctly when you view them in Adobe Reader or Adobe Acrobat.

  • How can I create links to other pages in iBooks that will function in PDF?

    Hi,
    I know some people have asked previously how to create links to other pages of their book within iBooks. I having an issue with this myself that I haven't been able to resolve. I am able to create the links, and they seem to function within the program, however, once I export the document as a PDF file (the format in which I need to have this ebook!), the links seem to be non-functional. Does anybody have a fix for this?
    Thank you so much for any suggestions you may have!! I really need to figure this out for my client.
    Regards,
    Meggyn

    Exporting as a PDF does alter/lose/remove certain functions. Adobe Acrobat has its own page navigation system.
    A lot of the hidden engine of iBooks Author is basically very similar to building a website! so links and books marks are an "internal" function.
    IF you  have Acrobat and not just the Adobe Reader, you can make links.  I have never needed to try, but  I see a working link related index  in the many software manuals  I have.

  • I'm on the latest version and on many websites that have links to others those links will not load.

    I'm on the latest version and on many websites that have links to others those links will not load. Links within a site work but anything that sends me elsewhere will no longer load in a new tab. I'm on a mac running Lion.

    It means what the message says. The format of the song can't be converted to a format compatible with the iPod.
    Does it play in iTunes?
    Where id the song come form?
    Try deleting and reimporting into iTunes.

  • Build a blank/other type of page which can show links to other pages

    Can someone please tell me how to build a blank/other type of page which can show links to other pages? I mainly want a page to show 3 links, once someone clicks on it, then it will go to a specified page. I tried using URL, but that did not work. Any advice is greatly appreciated. Thank you very much for your help in advance.
    -Grace

    Do a region (probably a HTML-based one is fine), enter in the HTML for your links, and that should be it. What didn't work about this?
    Your links probably should appear like this in your coding (use substitution variables):
    f?p=&APP_ID.:3:&APP_SESSION.
    In the above example, "&APP_ID." will resolve dynamically to the application ID that you are in, "3" is page 3 (change this to whatever page you want the link to be), and "&APP_SESSION." is the existing session number (if you don't include this, the user will receive a new session ID if the destination page is public or will be intercepted annoyingly to log in and get a new session ID which you probably don't want).
    Do not include the full http path. Just start with f?p... and everything is assumed to be relative to Apex on the current environment.
    Those are effectively the minimum requirements for a URL in Apex to go from one page to another in an app. You can add to that the additional URL parameters for Request value, Set items with values, clear cache, reset pagination, etc. if you need to. Check the Apex online help under "understanding URL syntax" for details on these.

  • When Publishing to BC, images get swapped around from other pages

    When i am Publishing my muse file to Business Catalyst, all my images get swapped around from other pages, both in slideshows and placed images, how do i get it to stop doing this! In preview mode the images are where i want them!
    This is one of my pages with the slide show with the correct image
    This is the image that is appearing in its place within the slide show which is from another page within my site!
    I have tried to look through each page and re publish the site which is working for some pages but then makes others worse!

    Check out Apnewbie's page on publishing errors. See if any of the suggestions help your particular situation....
    http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp

  • How to create links to other pages i create??

    I have finished my "homepage" and it has 5 buttons on it.("home",
    "Contact us", etc.).
    I have no idea how to create links to other pages i create.
    For example, if the user clicks on "Contact us", i wnat contact information
    to appear. So, do i create another html document that will contain contact
    information and then call that page whenever the user clicks "Contact us". Or
    do i just create another applet that contains contact information and display
    the applet in the appropriate area, whenever the user clicks "contact us".
    Hope that wasnt confusing. Bascially, I am sitting here looking at my buttons, not knowing
    what code to put under the actionPerfomed part of each button.
    thanx
    trin

    ... judging from your question... the best way i think is to create another page...
    .... so when ur user clicks on Contact Us..... he/she will be taken to another page...
    there are other techniques besides this.... but it is always better to stick with the easiest one
    ... so you need to create separate pages for all of your links....
    ... if you have any questions... let me know
    .... have fun

  • Create links to other Pages documents

    I am a singer and have been using a binder with all my lyrics in it for shows. I got an iPad for my birthday and want to use it in the binder's place. With each show the set list changes and I'd like to be able to create a setlist document in Pages with links to other Pages documents with the corresponding lyrics. The lyrics documents would be static; the setlist document would always be changing. The links in the setlist document would be like hyperlinks of sorts, except instead of taking you to the web, they would take you to other Pages documents in the My Documents folder in Pages.
    I've searched all over the place for a solution. I've even tried using spotlight to search for the lyrics documents as a workaround, but spotlight doesn't find the Pages documents. Is this something I can set up on my MacBook and then transfer to my iPad? Is there other software besides Pages that can do this?
    Thank you in advance!

    I think it would be much simpler to save your lyrics as pdfs and use one of the many dedicated music apps that allow you to create setlists. I use forScore (love it!), but you might also check out Unreal Book and Music Reader.
    If you have a Mac, of course it's a cinch to print any file to PDF. For windows, possibly the free version of CutePDF would work for you.
    EDIT I see you already have these printed out in binders. Just scan to PDF, then.

  • How to list all documents that has linked a image file?

    Hi everyone,
    I'd like to know if there's a way to find all linked file to a file: i have a logo image that a lot of inDesign files have linked to it and i'd like to find all those inDesign files.
    I know that Bridge CS6 can list all linked files of a .indd file but i'd like the opposite
    Regards,
    Snowblood13x

    You might be able to do it via scripting. If you have to search an entire volume it would be impractical, but something like this AppleScript would open all of the ID files inside of a chosen folder and its sub folders. Once the ID file is open it could check for a specific link and if it exists leave the file open otherwise close:
    global mylinkname
    --change YourLinkNameHere to the logo link's name
    set mylinkname to "YourLinkNameHere"
    tell application "Finder"
        activate
        set the thisFolder to (choose folder with prompt "Choose a folder. The extension of all files inside will be hidden.")
        my ProcessFolder(thisFolder)
        tell application "Adobe InDesign CS6"
            activate
            display dialog "Done"
        end tell
    end tell
    on ProcessFolder(thisFolder)
        set theseItems to list folder thisFolder without invisibles
        repeat with i from 1 to count of theseItems
            set thisItem to alias ((thisFolder as text) & (item i of theseItems))
            set the iteminfo to info for thisItem
            if folder of the iteminfo is true then
                ProcessFolder(thisItem)
            else
                ProcessItem(thisItem)
            end if
        end repeat
    end ProcessFolder
    on ProcessItem(thisalias)
        tell application "Finder"
            if creator type of file thisalias is "InDn" and kind of file thisalias is not "InCopy® Lock File" then
                tell application "Adobe InDesign CS6"
                    activate
                    --set user interaction level of script preferences to never interact
                    open thisalias
                    set llist to name of every link of active document
                    if mylinkname is not in llist then
                        tell active document
                            close
                        end tell
                    end if
                    --set user interaction level of script preferences to interact with all
                end tell
            end if
        end tell
    end ProcessItem

  • Is it possible to set graphical style to multiple different images that are links?

    I have many thumnail images that link to different pages and each thumbnail image is a different picture so it appears as though I will need to create 20+ styles because they are 20 different images?
    Basicly I just want to set the roll over state to border color, down state to differnt color border, etc.
    but each style tells the border to be applied to that particular image state. So is there a way to make a global style that can be applied to all of these thumbnails?
    The only work around is putting a transparent PNG on top and applying the rollover, etc states then placing the clear PNG on top each of my thumbnails.
    There must be a better way to do this in Muse because I can do it using real CSS. I hope this makes sense.
    Bonus question:
    Each of my thumnails has an HTML text title below it. Is there a way to have both image and text change on rollover? I can only apply a style to each, not as a unit.
    thanks!
    Lou

    For your first question, the answer is that you cant store each states in a single Graphic Style.
    You need to create 4 styles (for example image_nav, image_nav_hover, image_nav_down, image_nav_active) and then apply it to each image.
    I suggest you to use a menu widget to create this kind of navigation, so you can choose the "edit togheter" option that allows you to reflect the cahanges you made to a single menu item to each other.
    For you second question, I suggest you again to use a navigation widget.
    1. Select you menu widget and click on the little blue circle on the top right corner.
    2. Select the "Show left icon" option to enable a icon for each menu item.
    3. Set Part positioning to vertical (centered or left aligned as you need) to put the text below the image.
    4. Style the image and the text as you like. You can use the 4 graphic styles I told you before to style the image.
    5. When you roll over or click a menu item, both image and text will change state.

  • Errors when trying to open up a disk image that has been comp. & encrypted.

    I have an old 15” PowerBook G4 that I purchased back in 2004 that I wanted to backup the data on in preparation to sell it. The PowerBook has Leopard (Mac OS 10.5) installed on it. I used my Leopard installation DVD to boot the computer up and then launched disk utility (v. 11.0 (252)). I wanted to make a disk image (.dmg) of my entire “Macintosh HD” partition, so after unmounting the partition (otherwise you get a “resource busy” error message), I selected File -> New -> “Disk Image From...(<hard drive partition>)”. The next screen presented me with a name to type in for the saved disk image file and options to compress and encrypt (128 or 256 bit AES) the image. I could not get the image to begin creation when I had both compression and encryption set. I kept getting the error message “Unable to create (error -60007)”. So, I opted to create the disk image with just compression selected. This worked fine and I was able to select the image (let’s call it disk_image1) and perform an Image -> “Scan Image for Restore...” successfully as well as mount the image and open up files (the verification process took a long time before the image mounted, but it was successful).
    Next, I moved the Firewire 800 external HD containing “disk_image1” to my new MacBook Pro (Snow Leopard installed) and opened up disk utility (v. 11.5.1 (298.1)). I was able to successfully mount the image and browse and open up files with this updated version of disk utility. I then attempted to convert the disk image I just created to a new disk image (let’s call it disk_image2) via Images -> “Convert...”. I selected “disk_image1” and then named the new image (disk_image2). I then selected compression and 128bit AES encryption, entered in a passphrase and started the process. Everything worked great in creating “disk_image2”, but when I tried to open up the image either in Finder or within disk utility, I got error messages. In disk utility, I got the message “Unable to attach “disk_image2.” (Authentication error).” and within Finder, I got “The following disk image couldn’t be opened” disk_image 2 (Authentication error). Note, I was never asked to provide the password I used to encrypt the image nor did I ever select to save it in my keychain. Just as a precautionary measure, I check my keychain and did not see the password for the encrypted image saved in there.
    Is there a bug within disk utility with the way a compressed & encrypted image is created or a problem with the authentication process for an encrypted image?

    I have not had this happen to me, but have read similar stories from people on these boards for years. I think saving an entire OS X boot disk to a disk image is asking for trouble. If anything goes wrong, one byte of data is copied incorrectly. it can render the entire image unmountable and all of the data in it inaccessible.
    I'd use Disk Utility's Restore button (or a program like SuperDuper or Carbon Copy Cloner) to make a complete copy of the hard drive onto its own hard drive, skipping the disk image. If any bit of data gets dropped then only one file is affected, instead of the whole works. Do you have any other stuff on that external drive? If not, just erase it and try again, copying everything directly to the drive instead of to a disk image.

Maybe you are looking for