Removing unresolved SIDs from AD Group populated with cross-forest members

Hi there,
Looking for a way in PowerShell to remove a specific unresolved SID from a group.
Having an issue where a group is populated with accounts from a domain in another forrest. When the accounts are deleted the SID remains in the group unresolved.
I have written a script to generate a list of the unresolved SIDs but I'm unable figure out how to then remove these from the group as Remove-ADGroupMemeber fails to find the account.
Anyone got any Ideas?

I don't have a multi-forest environment set up to test any of this, but based on what I'm reading so far, you might need to fall back on using the System.DirectoryServices classes. Cross-Forest group memberships are accomplished by creating foreignSecurityPrincipal
objects in the group's domain. What you need to do is remove the FSPs associated with those unresolved SIDs from your group. You can do that with ADSI, if the AD cmdlets aren't handling that situation very well.

Similar Messages

How to remove a keyword from a group of photos

I want to remove a keyword from a group of photos. They all have the same keyword attached, of course. When I right-click keyword and choose 'Remove keyword from selected photos' it removes the keyword from the most-selected photo ONLY, not from all photos that are selected. I have to remove the keyword from each photo one at a time.
I'm running LR 5.6 on a Mac.
Thanks for any assistance.

etmarcr wrote:
I didn't think about..
Perhaps not the most intuitive, but that's how I do it..
Free tip: to assign to all, remove the '*' (asterisk).

Is it possible to add/remove a person from a group using workflow?

Hi All,
Is it possible to add/remove a person from a group using workflow?

What version of SharePoint are you using?
There is CodePlex project that adds additional work flow steps that would help you out. These include
Create Site
Create Group
Add users to group
The link is http://ilovesharepoint.codeplex.com/releases/view/89201
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How do I permanently remove a name from a group list?

I would like to permanently remove a name from a group list. I have highlighted and deleted and it still won't go away. I have deleted him from my address book but I cannot remove him from the group list.

There is the mailing list stored (which addressbook)? Perhaps the addressbook is read-only or unavailable?

How do I remove a person from a group photo?

How do I remove a person from a group photo?

Try the re-compose tool.
http://www.youtube.com/watch?v=diY3y4LwsI0

How do I remove a contact from a group?

How do I remove a contact from a group?

Warning: the method Demo mentioned seems to delete the contact off your device entirely (and off of all your devices if you're using iCloud for your contacts), not just remove them from the group. I haven't found a way to remove them from the group while keeping them on the device.

Removing an attribute from a group by clause

This concerns a web application developed by JDeveloper 10.1.2 (adf, uix). I have viewobject with a query, written in expert mode, that has a group by clause. I removed an attribute from the select statement that was included in the group by clause and removed it from the bindings of the page that displays the data from the view. When I test the application module the data is grouped correctly. But when I run the view the attribute is not shown on the page but the data is still grouped by the attribute. The same query works fine in SQL plus, it looks like JDeveloper 'remembers' the old group by clause somewhere. I checked the xml file of the view object and it looks ok. Where can the old group by clause be written? How comes it is still applied?

joni1129 wrote:
I am trying to place a shape on an image and remove it from the photo, creating just the picture within the shape. When I follow instructions, I get a lovely shape around my image, but the image isn't removed. It just sits in a white-checkered background.
How do I get rid of the white background?
The white-checkered background is a visual reference for transparency. (It won't print.) To keep the transparency, you need to save in a format that supports transparency, PSD, TIF (with save transparency checked), PNG, or GiF. If you save in a format such as JPG that doesn't support transparency, the transparency is replaced by white.
Edit: If you are transferring the image into another software application, you may have to save the selection along with the image. Select<Save Selection. You'd have to also check which of the formats that application accepts.

Grouping Checks, All element from a group present with all option available in group

Respected Techie....May i get help on this how to design a query for below condition, if possible.declare @myTable table (PT varchar(50), MK varchar(50), MO varchar(50),
YR varchar(50), REMARKS varchar(50), PART varchar(50))
Table Structure:-
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Four Wheel Drive', '51C') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Rear Wheel Drive', '51X') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Rear Wheel Drive', '51C') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Battery' ,'Dodge','Ram 50', '1989', 'Four Wheel Drive', '51X') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Four Wheel Drive', '46264') -- This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Four Wheel Drive', '875') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Front Wheel Drive','46264') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Air Filter','Dodge','Colt', '1990', 'Front Wheel Drive','875') --This will be in Output, as Group of PT, MK,MO,YR have 2 remarks and part are available with both the remarks
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Four Wheel Drive', '1330371971') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Four Wheel Drive', 'NR-301') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar' ,'Ford','F-250', '1997', 'Rear Wheel Drive', 'NR-301') --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Controls', 'Cadillac','Chasis','1992', 'Rear Wheel Drive', 'CK620158') --Removed from output, as group by PT,MK,MO,YR contain only 1 remarks and 1 distinct part
insert into @myTable values ('Controls', 'Cadillac','Chassis','1992','Rear Wheel Drive', 'CK620159') --Removed from output, as group by PT,MK,MO,YR contain only 1 remarks and 1 distinct partThank You Very Much

It would certainly help with some more details on the business rules.
I am puzzled over these two rows:
insert into @myTable values ('Bull Bar'   ,'Ford','F-250',   '1997',   'Four Wheel Drive',   'NR-301')
   --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
insert into @myTable values ('Bull Bar'   ,'Ford','F-250',   '1997',   'Rear Wheel Drive',   'NR-301')
   --All element from a group of PT,MK,MO,YR should be Removed from output, as Part 1330371971 is not available with all the remarks available in a group. (1330371971 is not available with Rear Wheel Drive.)
Overlooking the fact that the part number in the comment does not match, how this is different from parts 51C and 51X which also has a Four Wheel Drive and a Rear Wheel Drive?
I guess the real question is how do I know what "all available options" are? I would kind of expect a table which defines this.
And please don't forget to tell us which version of SQL Server you are using!
Erland Sommarskog, SQL Server MVP, [email protected]

Can't figure out how to remove select music from my iPhone 4 with the new iTunes

My old PC with all my music on iTunes died, and I need to remove some music from my iPhone 4 to make room for the new OS update. I downloaded iTunes on a different computer and tried to sync the iPhone to it, to move all the music on my iPhone to iTunes so I could deselect what songs I wanted to remove to make the storage space. I can't figure out how to do this with the new (non-user-friendly) iTunes update. When I sync the phone, the only songs that show up are the ones I have purchased on iTunes, but non of the songs/albums that I transfered from CDs. I don't want to reset my phone to delete ALL my music, just select songs/albums. Can anyone please help me figure out the new iTunes to be able to do this? It is driving me nuts and I'm getting really mad at Apple for their constant updates making things less easy to use!

i have the same problem, if u find it out please let me know :C i can erase or put new songs from my pc to itunes u.u

HT2486 How do I remove a name from a Group in Address Book?

I have an email group for a committee I run. The membership has changed. How do I remove members from the group without deleting them from my entire address book?

Click on the Group and then highlight the card you want to remove. Press the delete key and the dialog will ask to delete the card or remove from group.

How do I remove an address from a group without deleting it from my address book?

I'd like to send out a group email about the death of the mother of one of the group members. I need to temporarily remove him from the group. How do I do that? I cant display all of the group in my address line so I can cut his out, & can't figure out how to remove him from the group. (I'm afraid the delete button in his info will take his info out permanently, not just out of the group.

Install the AddExpandedList add-on allow the removal of select contacts from a mailing list addressing:
https://nic-nac-project.org/~kaosmos/index-en.html#explist
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Press F9 in a Write window to show the Contacts sidebar, then right-click a mailing list.

Gal Sync and group member sync cross forest. Not working together

I am finalizing a cross forest migration. The End client needs an extended period of time with both domains up and running. I have been working with an advisory engineer and we are having a hard time.
We started by setting up GAL sync and that works as expected. Then we tried to setup group provisioning, and I have that working. I can create a groups and add members, as long as those users are in FIM and the Target forest the membership information
is preserved. During the process we removed the GAL sync agents for ease of troubleshooting. Now when I run the GAL sync agents and I search the connector space I am showing connector false on both sides. I am not sure how to correct that. The other objects
were created by the DS agents and FIM. If I sync a new object it will create a contact cross forest.
What I want it to do is run the GAL sync without group contacts. Synchronize the GAL on both sides. (Groups have been created on both sides of the domain and ADMT has moved the group membership with the user) After the GAL is synchronized I need FIM
to synchronize the group membership adding the contacts from the missing users that have moved. I am not sure how to get that logic in the system.
I am not sure I am going about this the right way. It may be easier to use the FIM and AD DS agents to provision users cross forest as contacts and the group membership would be preserved. If that is the case, I am not sure how to pull
that off.
Does anyone have recommendations?
Thank You

This is an overview of basically how it works.
The Group sync is pretty much out of the box, the real key here is the User is imported to FIM and that 'Person' is then provisioned outbound as a contact.
Membership synchronizes with the Group and FIM maintains group membership cross forest as the source user, and the target contact are the same 'Person'.
Precedence is important. The OU structure is the same on both forests and needs to be initialized. The Groups Sync is ahead of the users and then the users sync, and the group membership
syncs.
The attribute flow is a long list. It includes all of the exchange information for the contact, and it provisions the contact as mail enabled on both sides. There is no VB it’s all
done in sync rules.
Next Ill post the attribute flow and precedence diagram, I’ll get that together this week (I hope). I intend to put this up in a lab and get screen shots on the whole configuration.
I will do that as soon as I can.
Let me know if you have questions.

Remove a logo from a video clip with content aware fill?

I know you can remove logo in photos using content aware fill, but you can't do it to a video clip. You can only do it to a frame, but you can't apply it to the entire video. I know photoshop is not a video editing software, but having this sort of feature makes sense for photoshop users especially with content aware fill.

I'm a career software architect engineer of 35 years, and I have to side with Howard on this one.
Like Howard, I feel you're thinking about this way too simplistically. Trying to work out what best to fill a part of an image with in 3 dimensions (x, y, and time) and have it look believable almost boggles the mind, especially thinking of a general case (your logo example is far to simplistic in itself). The task is far from a simple looping repeat of what is being done 2 dimensionally on a still frame. Frankly, it's more likely related to what's done with CGI, where scenes are modeled in 3D (4D actually) so certain elements can be replaced believably.
Think about it... If CAF is presently replacing part of an image with something it finds through some heuristics in another part of the image, and the stuff in that part of each frame is changing - and it would, because this is video, not still imagery - then it will select differently every time. What makes you think it would select something that even resembles what it selected for another frame? What you'd end up with is a frame by frame mishmash that would just make the outline of the selection obvious.
Regarding CAF applied to individual frames, then your finding the result isn't coming out as expected in all the frames of the video (e.g., when you're testing this concept) may indicate a problem with the way you're using the tool, or possibly even a bug. You might want to describe step by step what you're doing and show the result you're [not] getting.
-Noel

How do you remove fraudelant charges from itunes app "words with friends, WORD-O_Meter from Zynga Mobile"

I purchased this app July 5, 2013 and was charged 2 times that day. Now it keeps telling me I have run out uses and i need to renew. It has charged me 4 times on July 20, 3013. The app is a crook, please remove all the charges from my account.
Two of the charges are on Itunes store receipt No.197055768594
I need to know if the apps store has shared my credit card information with the Zynga mobile company? Do I need to cancel my credit card to prevent Zynga mobile from charging any other charges or worse yet selling my account number.
If you google "zynga mobile fraud" then you will get a lot of information on "zynga mobile".
You need to stop all payments to Zynga they are causing the apps store to cheat your customers.
I have CC this email to Bill Husted (Technobuddy), who is a syndicated newspaper writer that I read in "the Atlanta Journal-Constitution".
Thanks for looking into this.

This is a usr to user tech support forum. Apple is not here. Apple does not answer questions here.

Removing a scratch from the iPad back with Meguiar's Scratch X 2.0

Within three weeks of getting my new Ipad and with extreme caution of use, somehow I managed to create a 1" long faint scratch on the back of the unit. These kinds of scratches are unbelievably easy to make since the back of the unit is only anodized aluminum, a relatively soft metal with a coating that accentuates any scratch.   So I'd recommend anyone who cares about such scratches either put on a plastic coating like ArmorSuit MilitaryShield or get a case over the unit immediately after taking it out of the box (oh, and, by the way, some cases will themselves scratch the unit as will Apple's Smart Cover around the hinges - even if Apple doesn't admit it).
I tried to reduce the faint 1" long scratch's visibility using Meguiar's Scratch X 2.0. I rubbed the polish with a microfiber towel across the scratch (i.e. perpendicular swipes) for about 15 or 20 minutes applying between moderate to fairly high pressure with my finger.   The scratch was not removed, and that's expected because you really can't remove a scratch unless you reduce the material to the depth of the scratch or fill it with something; neither of which this product does. Indeed if Meguiar's did reduce the metal surface that much, the anodized aluminum finish would probably be removed and the case appearance completely ruined. However, Meguiar's reduced the scratch visibility by about 70% to my eye. I did take pictures to try to prove this, but they are not helpful because the camera's view of the scratch is almost entirely dependent on the angle of it with respect to the flash, so my camera simply cannot capture the real visibility of the scratch.
So did Meguiar's alter the color or nature of the anodized aluminum around the scratch? Yes, it did, but the effect is so slight that it would hardly be noticed unless you look at the surface at exactly the right angle with respect to the light. It basically slightly increased the luster where I rubbed. But the small increase in luster is nowhere near the increase a plastic coating results in, so for me it doesn't matter since I plan on applying the ArmourSuit (again). Other than that there was no real effect on the surrounding surface.
Summary: With a little elbow grease, Meguiar's Scratch X 2.0 reduced my new iPad scratch's visibility by approximately 70% and did not damage to the unit in any way. I recommend it for iPad scratch reduction if you made the mistake of not protecting your iPad, have a scratch, and are obsessive enough to be motivated to reduce it. Otherwise, I'd just save you money. Incidentally, Apple has purchased Liquidmetal technology around the launch of the new iPad. Liquidmetal is a patented amorphous metal alloy that promises the workability required for case molding yet is as strong or stronger than steel, so I suspect Apple's notoriously easy-to-scratch casings are soon going to be a thing of the past.

I decided to do one more treatment to the scratch because I was bored and it sounded like fun. I bought a Sharpie silver paint pen with extra fine point ( see http://www.amazon.com/Sharpie-Marker-Extra-fine-Silver-Single/dp/B003JJMW8C ). I think I paid like $2.50 for this exact pen at Michaels after a 40% rebate (they have them all the time; just print the online coupons).
The marker line was fine but, of course, far wider than the scratch and the color was much darker than the silver when wet. I let it dry for about a minute (it lightened as it dried to match the unit better), then I took one more drop of the Meguiar's Scratch X 2.0's and rubbed it gently with my finger a bit to remove the paint that was above the scratch, leaving the paint behind only in the crack (do NOT rub this for long or else it can remove all the paint)
The result is that the original scratch went from the 30% of the original scratch noticeably (after the Meguiar's treatment) to about 10%. Now it is nearly impossible to see unless you are viewing it from just the right angle (i.e. perpendicular to the line).
Attached are two pictures. I took a shot of the iPad before either treatment and adjusted it in Photoshop to be about exactly how noticeable the scratch was before the treatment (it was still under the ArmourSuit at that time). Keep in mind that this shot was angled intentionally to maximize its visibility, so this wasn't a super deep scratch. I then took another shot after both treatments and at the same angle. Again, I adjusted it slightly in Photoshop to match what I am seeing now (and again the shot is worse than real life - by a long shot).
I think the results shown in the picture are perfectly accurate and pretty much speak for themselves.   I would say the two steps were a 100% successful since I did not think I would be able to reduce the scratch as much as I did given what others were saying online.
Conclusion: you CAN remove iPad back scratches if you really want to!
Here is before (note there is a piece of cat hair on the right, not a second scratch)
After:

Removing unresolved SIDs from AD Group populated with cross-forest members

Similar Messages

Maybe you are looking for