Rename a GOOP object after it's created
Does anyone know how to rename the GOOP object (.llb) after it has been created? If the llb file is renamed, the "add function" functionality in GOOP object design window stops working.
> I opened up the callers and they didn't "feel"
> anything. I'm not sure why, because I looked
> at the code of the renaming tool and the option
> to "Save as Copy" is false.
This violates the laws of the Universe ;-)
> Also, on a slightly separate note, not only did I
> have to manually relink all the newly named vis,
> but renaming also made all the functions private.
> I had to manualy set each function to public so
> that it would be the way it was before renaming."
That is a good point, I will add a feature the preserves "Top-Level" VIs stored within LLB. That will fix the private/public problem.
-Jim
Similar Messages
-
Create Info objects after extracting ds from ecc
Hi All,
I have replicated ds from ecc to bi and executed the infopackage. Now the data is upto psa level. How to create info objects after loading data to psa level to load the info objects to data targets like infocubes and dso. I have done to sucessfully to a flat file.
Thank you.Hi Sudhir,
You can go into 2 directions: use as much as possible Business Content InfoObjects or use custom InfoObjects. A combination is also possible.
Especially in conjunction with SAP ECC extractions the Business Content InfoObjects are a safe choice. However, please consider the advantages it can have to use custom InfoObjects.
If you would like to go into the direction of custom InfoObjects, then I suggest reading the following blogs:
Generating Data Warehouse InfoObjects - Part 1: Introduction;
Generating Reporting InfoObjects based on Business Content - Part 1: Introduction.
Best regards,
Sander -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Note 1054131 - Invalid DB objects after upgrade
HI,
We performed a migration from SAP 4.6C/Oracle9i.solaris to SAP 4.6C/Oracle10g/HPUX.
Now we need to upgrade SAP4.6C/Oracle10g/HPUX to ECC6.0.
As a prerequisite, I have checked the note
Note 1054131 - Invalid DB objects after upgrade
And I ran the script
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE FROM DBA_OBJECTS
2 WHERE STATUS='INVALID'
3 AND
4 OWNER='SYS';
OWNER
OBJECT_NAME
OBJECT_TYPE STATUS
SYS
DBMS_REPCAT_FLA
PACKAGE BODY INVALID
SYS
DBMS_REPCAT_MAS
PACKAGE BODY INVALID
OWNER
OBJECT_NAME
OBJECT_TYPE STATUS
SYS
DBMS_REPCAT_UTL2
PACKAGE BODY INVALID
SYS
DBMS_REDEFINITION
OWNER
OBJECT_NAME
OBJECT_TYPE STATUS
PACKAGE BODY INVALID
All the invalid objects are package body, can anyone help me how to proceed with this, can I proceed my upgrade to ECC 6.0 or do I need to delete the package body.
If I want to delete the package body,can you pl give me the commands and also post which whether I need to execute any steps
Pl help
Thanks
SenthilHi,
I guess you are talking about the Oracle Upgrade and not ECC Upgrade, as following are the pre-requisites for an ECC upgrade.
Making Database-Specific Preparations for Oracle
1. Check the value of parameter shared_pool_size:
4 Preparation
Making Preparations at the Database Level
Oracle 9.2: Check the value in file $ORACLE_HOME/dbs/init<SID>.ora.
Oracle 10.1 and higher:
select NAME, VALUE from v$parameter where name=shared_pool_size;
select NAME, VALUE from v$parameter where name=shared_pool_reserved_size;
If the value is lower than 150 MB, increase it to at least 150 MB (400 MB is better), and restart the
database.
2. Log on as user <sapsid>adm at the operating system level.
3. Log on to the database as the Oracle user system with sqlplus
4. Check the resource quotas of the database user SAPR3 or SAP<SAPSID>:
Oracle error 1536 can occur during the upgrade if the resource quotas of database user SAPR3
orSAP<SAPSID> are limited. Make sure that these quotas are unlimited. Check whether the table
DBA_SYS_PRIVS contains one of the following entries:
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=YES
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=NO
To do this, enter the following SQLPLUS statement:
select * from dba_sys_privs where grantee = SAPR3/SAP<SAPSID>;
If this entry does not exist, enter the SQLPLUS statement:
grant unlimited tablespace to sapr3/SAP<SAPSID>;
5. Log off from the database with the command quit.
6. Only if using the dictionary managed tablespaces function:
Make sure that the storage parameters MAXEXTENTS and NEXT have the correct values for certain tables and indexes. Otherwise, they may overflow during the upgrade. The Oracle-specific upgrade SAP Note contains the tables and the required minimum values.You can display the current settings with BRSPACE. The index names are not constant. However, you can also determine these names with BRSPACE. SAP Note 11777 describes how to change the parameters NEXT and MAXEXTENTS.
7. Only valid for: SAP R/3 3.1I
Make sure that parameter OPTIMIZER_MODE is set to OPTIMIZER_MODE=RULE.
For Oracle 9.2, check and, if necessary, edit the following Oracle profile:
$ORACLE_HOME/dbs/init<SAPSID>.ora
For Oracle 10.1. and higher, use the following statements:
Sqlplus /nolog
Connect /as sysdba
Alter system set OPTIMIZER_MODE=RULE scope=spfile;
8. Only if you do not switch off archiving during the upgrade:
If you want to leave brarchive running during the upgrade to avoid archiver stuck situations (brarchive -f ...), proceed as follows:
a) Create a temporary copy of brarchive:
4 Preparation
4.23 Making Preparations at the SAP System Level
cp /usr/sap/<SAPSID>/SYS/exe/run/brarchive /tmp
b) Start brarchive as user ora<sapsid> from the temporary directory /tmp/brarchive -f ...
c) After the upgrade, delete the copy of brarchive.
This procedure avoids upgrade errors caused by the program files being overwritten during the upgrade.
9. If your database version is already higher than the minimum version for the new release, we recommend that you exchange the DBA tools (such as BRSPACE) for the upgrade. The Database Software Oracle DVD for the database contains the up-to-date tools that you unpacked on the current kernel when you migrated the database. After you execute PREPARE, unpack this archive again into the exe subdirectory of the upgrade directory. This overwrites the DBA tools optimized for the minimum required database version with the tools best suited to your database version.
And if you are talking about an Oracle Upgrade then you just need these to compare once you have upgraded to 10g.
3.9 Checking for Invalid Database Objects
This optional step lets you check if there are any invalid database objects before the database upgrade to Oracle database 10g starts. After the upgrade it helps you distinguish database objects that have become invalid due to the upgrade process from those that were already invalid to start with.
Procedure
1. Execute the following commands:
SQL> spool invalid_objects
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> @?/rdbms/admin/utlrp.sql
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> spool off
A list of invalid objects before the upgrade is now generated.
2. Check the list of invalid objects after the upgrade.
If any objects in the list from before the upgrade are also in the list of invalid objects after the upgrade, you can be sure that this is not due to the upgrade process.
Regards,
Suhas -
What is authorization object and how to create it for a table
Hi All,
What is authorization object and how to create it for a table?
ThanksHi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
ID name1 FIELD f1
ID name2 FIELD f2
ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
· 0: The user has an authorization for all specified values.
· 4: The user does not have the authorization.
· 8: The number of specified fields is incorrect.
· 12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD pa_carr
ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF wa_flights
WHERE carrid = pa_carr.
WRITE: / wa_flights-carrid,
wa_flights-connid,
wa_flights-fldate,
wa_flights-seatsmax,
wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh -
Creating Enhencement-Point - Object can only be created in SAP package
Hi Guys,
I am creating an enhencement point in Z program in Z package. I am getting following message.
" Object can only be created in SAP package "
Please help.Hi Mini
Enhancement points are like hooks where you can attach your own piece of code and coding in an enhancement point is no different than a normal coding , just that it is a point in the standard program into which you can give your own custom logic.
There are 2 types of enhancements given by SAP:
1. Explicit enhancement points: Go to program RIAUFMVK . You can see ENHANCEMENT-POINT at many places. These are all explicit enhancement points and you can easily implement these points . Simply press shift+F4 and then go to the point which you want to implement. Right click on it and follow the path Enhancement implementation->create. Give the name of the implementation and the assign it to a package(shoud not be a Z package).
Once it is created you can start your coding as you normally do.
2. Implicit enhancement points are not very stable and should be the last resort after you have explored all the user exits , BAdIs and explicit points. In order to find out the implicit enhacement points , press shift+F4 then goto menu option Edit->Enhancement Operations->show implicit enhancement options. This will bring up all the points that you can enhance. This will appear as a line with arrows. To implement this you have to follow the same procedure as for explicit enhacement points.
So enhacement point works like the other codes . Just that you should know which one to implement and where. As far as possible avoid implicit enhacements as they are not very stable at present and even if you are going for it keep a back-up of your code always.
Hope this helps you. lemme know if you have any other issues.
Cheers
shivika
Message was edited by:
Shivika Bhorchi -
Calling a Script Object after remove instance index[0]
I have created a LiveCycle document that has a repeatable subform as url linked below. The form will not let me call a Script Object after removing an instance at index[0]. Regardless of the number of instances remaining. I use a script object to show and hide buttons. Adding an instance is not a problem. What to do?
Script on Delete Subform Button (Error):
xfa.form.recalculate(1);
this.resolveNode('fifteenSubform._CorrectiveActionWrapper').removeInstance(this.parent.ind ex);
if (xfa.host.version < 8) {
//deleteing a [0] index seems to create a problem for executing the function in this Script Object
SOremove.fxremove();
https://files.acrobat.com/a/preview/03389d79-9020-45d9-ba4f-fb4cbdc21f77Hi,
What seems to happen when you remove a form object that has code that is currently executing is that it can't find the next line. You might want to put all your code in the script object.
so in the click event you have;
SOremove.fxremove(this);
Then your script object will start
function fxremove(button) {
button.resolveNode('fifteenSubform._CorrectiveActionWrapper').removeInstance(button.parent.index);
if (xfa.host.version < 8) {
xfa.form.recalculate(1);
console.println("The SOremove.fxremove fired");
Regards
Bruce -
Edit entity object and use the Create() method for generating ID's
Hello,
I have and InserPage.jsp and defined the datasoucre correctly.
<jbo:InputText datasource="ds" dataitem="Clientid" /> gives me
the unique ClientID from the FIRST client-record in my table ,
although this page is for inserting a NEW Client, with a new
ClientID.
So, on the Clients Entity i made a create() method and put the
following code in it:
public Number getClientid() {
return (Number)getAttributeInternal(CLIENTID);
public void create(AttributeList attributeList) {
SequenceImpl seq = new SequenceImpl
("Clientid",getDBTransaction());
Integer i=(Integer)seq.getData();
setClientid(new Number(i.intValue()));
super.create(attributeList);
the getData() Returns a sequence value, but what sequence value?
Do i have to create a sequence on the ClientID column in my
Oracle Table in the DB too?
The problem is, the first ClientID # is 819 and the current last
one seems to be 2899, so how do i achieve that when opening the
insert.jsp the new ClientID shows up (ie. 2900)?
How can i achieve this?
thxOK, managed to track down the HowTo on triggers? I created the
trigger.
create sequence client_seq
start with 8900
increment by 1
nomaxvalue
nocycle;
I changed the create() method for the entity object to:
public void create(AttributeList attributeList) {
SequenceImpl seq = new SequenceImpl
("Clientid",getDBTransaction());
SequenceImpl s = new SequenceImpl("client_seq",
getDBTransaction());
Integer next = (Integer)s.getData();
setClientid(new Number(next.intValue()));
and running the tester for the module works fine. ;-)
But...
The Insert.jsp page has to insert/show this sequenced value!
After i defined the datasource and let us say:
<jbo:InputText datasource="ds" dataitem="Clientid" />
...the number 819 shows up, which is the FIRST record, so i do
not get the new ClientID with the correct number.
Any help is always nice. ;-) -
ORA-12838: cannot read/modify an object after modifying it in parallel
I am getting the above error when i hit this part in my load ....
can somebody suggest me why it could be in this case ?
MERGE INTO PART1 H
USING (SELECT PA1, PART1, CON1, GEO1, COUN1, KIT1 FROM W1 ) WH ON
(H.PART1=WH.PART1) --on PK darshan 01-03-2006
WHEN MATCHED THEN
UPDATE SET H.CON1 =WH.CON1, H.GEO1 = FN_GETGEOCODE ( WH.GEO1 ), H.COUN1 =WH.COUN1, H.KIT1 =WH.KIT1, H.DT1 =TO_NUMBER(TO_CHAR(FN_GETGMTDATE(SYSDATE),'YYYYMMDD')), H.DT_LAST1 = FN_GETGMTDATE(SYSDATE)
WHEN NOT MATCHED THEN
INSERT (H.PART1, H.PART2, H.CON1, H.GEO1, H.COUN1, H.KITD1, H.DT1, H.DT_1, H.DT_LAST_1)
VALUES(CASE FN_MERGE_COUNTER(gpi_inserting)
WHEN 0 THEN WH.PART1 END, WH.PARTN1, WH.CON1, FN_GETGEOCODE ( WH.GEO1), WH.COUNT1, WH.KIT1,
TO_NUMBER(TO_CHAR(FN_GETGMTDATE(SYSDATE),'YYYYMMDD')), PKG_COMMONACTIVITIES.FN_GETGMTDATE(SYSDATE), PKG_COMMONACTIVITIES.FN_GETGMTDATE(SYSDATE)
);does this give you a clue?
SQL> CREATE TABLE t AS
2 SELECT owner, object_name FROM all_objects
3 WHERE 1=0;
Table created.
SQL> INSERT /*+ APPEND */ INTO t
2 SELECT owner, object_name
3 FROM all_objects;
8982 rows created.
SQL> SELECT * FROM t;
SELECT * FROM t
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallelI bet that you need a commit after loading w1.
John -
Why the objects of sysman are created with the data type varchar2 CHAR
Hi,
I have an environment with the following properties,
NLS_LENGTH_SEMANTICS BYTE
NLS_CHARACTERSET AL32UTF8
After I have created the db control repository, I find the data type of the sysman's objects are
VARCHAR2 (64 CHAR)
Why?NLS_LENGTH_SEMANTICS does not apply to tables in SYS and SYSTEM. The data dictionary always uses byte semantics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams127.htm -
Refreshing Entity Objects after Altering the table
Hi,
My Entity Object is based on a table... and View Objects on the Entity Objects. Now if I alter the table (just changing the width of the column), that change is not visible on the Entity Object. Is there any way I can automatically refresh the Entity Objects after altering the table(only column width is changed).
(Changes made to Entity Objects manually are reflected in the View Object correctly.)
Regards
Faiyaz'changing the width of the column' means changing the size of the column in the table description in the database. For e.g.. In the original table I had a column OIL_KEY NUMBER(6). Now I change the column to be of size 12 i.e. OIL_KEY NUMBER(12). This does not get refreshed in the Entity Object.
-
"Object reference not set to an instance of an object" after view selection
Hello,
I have a Visual Studio LightSwitch project where I connect to a Oracle server and select a view as a new data source.
I get a error message "Object reference not set to an instance of an object" after selecting the Oracle view as a data source.
The Visual Studio Log shows me following details in the ActivityLog:
362 End package load [Visual Studio Explorers and Designers Package] {8D8529D3-625D-4496-8354-3DAD630ECC1B} VisualStudio 2011/09/05 12:17:58.258
*363 ERROR OracleConnectionUIControl.ProcessParentFormAcceptButtonClick - Exception opening the connection. Oracle Data Provider for .NET ORA-12560: TNS: Fehler bei Protokolladapter at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) at Oracle.DataAccess.Client.OracleConnection.Open() at Oracle.VsDevTools.DDEX.OracleConnectionProperties.Test() at Oracle.VsDevTools.DDEX.OracleConnectionUIControl.ProcessParentFormAcceptButtonClick(Object sender, EventArgs e) {D601BB95-E404-4A8E-9F24-5C1A462426CE} Oracle Developer Tools for Visual Studio 2011/09/05 12:18:05.652*
364 OracleVSGPkg.QueryClose - Begin Oracle Developer Tools VS Package Query Close {D601BB95-E404-4A8E-9F24-5C1A462426CE} Oracle Developer Tools for Visual Studio 2011/09/05 12:18:32.001
But this error ORA-12560 does not make any sense, because I have got a working connection to the Oracle server and can see tables and views.
Any ideas?
Environment:
Visual Studio 2010 SP 1
Windows Server 2008 R2
ODAC 11.2.0.2.40 Beta 2 for Entity Framework and LINQ to Entities
Regards
BenjaminHi, did you ever resolve this? I have the same problem.
Thanks,
Mike -
ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????
ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????
-
Address data changed after invoice is created
Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno RodriguesHi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans -
HOW TO: Change page size after page is created?
Is there a way to change the size of a page after the page has been created? In the documentation, the only way I have seen to set the page size is in a "with" statement right after creating the document. I have need to change the size of the document after a document has already been created. Any ideas?
Yep, that's how I am doing it. I just wanted to make sure that I was doing it correctly. I need to keep debugging then and figure out what the real problem is. I am new to all of this (obviously) and I just needed to make sure I had the idea correct. I didn't mean to use document and page interchangeably, I understand that you can't have different size pages in the same document.
Thank you for your help.
[FYI]I created a class that creates a document with most of the document settings that I use (e.g. a standard number of pages, non-facing pages, units in inches, etc.) but I don't specify a page size, that's something that varies between documents, so I figured I could just apply that after I have created the page. The problem is, when I try to create multiple documents it doesn't work. The script will create the first document using the default page size settings and I can't get it to change the page size, but then the next document will be created using the page size I tried to apply from the previous document that the script created. I am sure this is totally a coding error somewhere else. I will try to track it down. Just when I think I have this stuff figured out . . .
Maybe you are looking for
-
Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?
-
SQL Query Posting the Data Properly but Generating An Error
I've created a SQL query to update records in a database. While testing I used an Access database and it worked perfectly. To go into production I've moved the data to SQLServer 2005 installed on my xMII server. The SQL syntax is different for han
-
One Billing document for multiple Dilevery Documents
Dear All, I m trying to generate one billing documents for multiple dilveries documents with Tcode : VF04. But it is generating billing documents for all the delivery documents. M i missing any configuration or some thing like that. Suggest
-
Hi there. I am having an issue with my Table of Contents. All my links works except for the items that have a superscript in them. In the example below, when I create the PDF and hover over the items the three words of (Modes of Operation) are hot
-
Cannot achieve wireless printing with macbook
I can't get my HP DESKJET e-All-in-ONE to print wireless. I've heard it takes a special driver instead of the one on the CD that came with the printer. I use a MACBOOK PRO and AIRPORT EXTREME and osx 10.6.3