Rename Datastores

Hello all.  I have a simple script to rename datastores.  Input is a list of Datastore names.  New name is current datastore name prepended by "DoNotUse."  However it is very slow.
Any suggestions on speeding it up?  Thank you very much
$DSList = Get-Content -Path c:\temp\DSlist.txt
Foreach ($DS in $DSList){
     $NewDS = "DoNotUse_$DS"
     Get-Datastore -Name $DS | Set-Datastore -Name $NewDS

See if the following is faster
$dsList = Get-Content -Path c:\temp\DSlist.txt
$filter = $dsList -join '|'
Get-View -ViewType Datastore -Property Name -Filter @{'Name'=$filter} | %{
  $_.Rename("DoNotUse_$($_.Name)")

Similar Messages

  • Renaming default Datacenter, Cluster, and Datastore object names in EVO:RAIL

    Hello,
    The Datacenter, Cluster, and vSAN Datastore objects in my newly-installed EVO:RAIL appliance all default to a label of "MARVIN-...". Is it safe to rename these labels appropriate to my environment, such as a geographic location for my Datacenter object? I suspect that it is okay because the underlying UID will not change, but am looking for confirmation from someone who has successfully done this in a lab or production environment and who has also been successful in applying EVO:RAIL patches afterward.
    Thanks in advance.

    Just to close the loop, I successfully renamed the datacenter, cluster, and vSAN objects in vCenter Server.
    I kept a close watch on Log Insight at each step, and did log one error that I found suspicious following the object rename of the vSAN datastore:
    2015-01-29T19:03:27.158Z <My 4th Host's FQDN> Hostd: [783C2B70 info 'DiskLib'] DISKLIB-LINK :DiskLinkGetSpaceUsedInfo: Failed to get the file system unique id for file vsan://118eb054-f123-469a-d542-XXXXXXXXXXXX, using id as "remote"
    Where in my case the 4th host happens to currently be the HA master. I'm guessing this was just a transient error as it hasn't reappeared in the last 30 minutes, but I'll keep an eye out for it. There was no corresponding error viewed in vCenter Server, and I seem to be able to refresh the vSAN storage counter without issue.
    Thanks again.

  • Rename a DataStore in BO Data Integrator

    Hello:
    We're using BO Data Integrator 3.0 Professional and we need to rename a DataStore, (used by several Data Flows).
    Is it possible to rename it? How?
    Thanks in advance for your help and regards,
    Joaquin Castellano

    You can't. What I would do is export the entire repo (ObjectLibrary -> rightclick -> Repository -> export to file) into an ATLfile, do a search rename in that text file and then re-import it. Finally delete the old datastore's table and the datastore at then end. I hope you named the datastore uniquely, not that e.g. a column has the same name as the datastore.

  • After moving datastores, default folders were created again +1

    Hello,
    After moving all mailboxes from one datastore to another (Move space around) everyone's default folders got recreated (Except Inbox). So now everyone has, Contacts1, Calendar1, Tasks1, ect... The original folder still exists, however the folder class was
    deleted, so each folder is classified as a message folder. I'm assuming this happened, because the folder class was lost, so exchange recreated the default folders with the correct classes.
    I ran a power shell script and re-classified all the old default folders back to how they're supposed to be, however smart devices are only pulling information from those recreated default folders, among other issues. Since business was being lost, i went
    through each mailbox and moved everything from contacts into contacts 1 and so on.
    My question is, why did this happen, and more importantly, how do I get back to the original state? I cannot rename the default folders but I am able to delete the originals. I am open to any suggestion to get back to the original state.
    I've tried other 3rd party apps to rename the folders such as mfcmapi, but I get errors.
    edit: I'm running exchange 2013 on Windows server 2012 R2
    Thanks in advance,
    Kevin

    Hi,
    This issue usually caused by mailbox language settings after moving databases.
    Please try to Close Outlook completely. Then run the following command:
    outlook.exe /resetfoldernames
    That should reset the folder names. If this didn’t work, please refer to the Script for renaming Mailbox Default Foldernames back to original language in the following thread.
    https://social.technet.microsoft.com/Forums/exchange/en-US/e767b141-ea56-424f-8e3e-09f776c71b46/newmailboximportrequest-mailbox-folders-in-different-languages-after-import?forum=exchange2010
    Hope this will be helpful for you.

  • Rename a .VMDK file

    I have made yet another mistake.
    I have a new ESXi V6 server going well. Server 2012 R2 x2.
    However I made a fatal mistake it seems and I am hoping for an easy fix. 
    To create the second Server 2012 server I cloned the first one in the Datastore Broswer. I renamed the .vmx and nvram file names no worries however I can;'t seem to rename the .VDMK
    I can sysprep in windows and all seemed fine.
    so why is this an issue you ask? Well I can;t backup the cloned server in Acronis. It does not see the VM .
    TLDR. How can I rename a .VMDK file. ?
    This topic first appeared in the Spiceworks Community

    I have made yet another mistake.
    I have a new ESXi V6 server going well. Server 2012 R2 x2.
    However I made a fatal mistake it seems and I am hoping for an easy fix. 
    To create the second Server 2012 server I cloned the first one in the Datastore Broswer. I renamed the .vmx and nvram file names no worries however I can;'t seem to rename the .VDMK
    I can sysprep in windows and all seemed fine.
    so why is this an issue you ask? Well I can;t backup the cloned server in Acronis. It does not see the VM .
    TLDR. How can I rename a .VMDK file. ?
    This topic first appeared in the Spiceworks Community

  • Is there a way to create a renaming preset where the sequence starts at the number "0" zero?

    What I am trying to achieve is the following:
    Fro example, I am photographing a handbag and I need to rename the file using a barcode and a barcode scanner.
    My sequence of images goes like this:
    Image 1: Tag shot
    Image 2: Front
    Image 3: Back
    Image 4: Inside bag
    Let's say the barcode once scanned produces a code such as TRE8801AZT16-Z
    Right now my current preset is "Custom Text_Image # (1)"
    This results with the images being renamed as:
    TagShot: TRE8801AST16-Z_1
    Front: TRE8801AST16-Z_2
    Back: TRE8801AST16-Z_3
    Inside bag: TRE8801AST16-Z_4
    What I need is the sequence to start at zero so the tag shot is _0 and my images are named like this:
    TagShot: TRE8801AST16-Z_0
    Front: TRE8801AST16-Z_1
    Back: TRE8801AST16-Z_2
    Inside bag: TRE8801AST16-Z_3
    Is this possible? If yes, how?
    Thanks for the help
    Cody

    About as close as you can get is to right-click on a single clip and Make Multiclip Sequence. Hit OK to make an sequence out of the single clip. Open the sequence made and delete the multiclip and edit the clip you want back into the sequence.

  • How do I rename more than one file at a time within a folder?

    I am new to OSX. I am looking to rename a batch of .jpg files but I can't figure out how to rename all files within a folder?
    I looked for help and apple help only describes how to rename a single file?  please see the attrached link for more infomation
    http://support.apple.com/kb/PH10646
    Thankyou for your support people!
    Apple Nubee

    Use the Automator Action "Rename Finder Items"
    (Automator is in the Applications Folder)
    You have these options in rename:
    Click "Show this action when the workflow runs", then save the workflow as an App

  • Error while activating DataStore Object

    Hi Experts,
    I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
    "DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
    My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
    Below is the dump:
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
      "CL_RSTRAN_TRFN================CP " in include
      "CL_RSTRAN_TRFN================CU " in
    line 159:
    "Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
    Message was edited by: SAP BI

    Are you using transformations/DTP to load the DSO??
    I am not sure if this helps
    Note 961556 - DataStore (activation): Columns are initialized without rule
    Note 974833 - DataStore (activation): Columns initialized without rule
    Hope it Helps
    Chetan
    @CP..

  • Error while activating data loaded into DataStore Object in BI 7.0

    Hi Guys,
    I am facing the following problem :
    When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
    Below is the job log :
    Activation is running: Data target 0RPM_DS07, from 77 to 77
    Overlapping check with archived data areas for InfoProvider 0RPM_DS07
    Check not necessary, as no data has been archived for 0RPM_DS07
    Data to be activated successfully checked against archiving objects
    SQL-END: 14.06.2007 12:33:25 00:00:00
    SQL Error: ORA-20000: Insufficient privileges
    Parallel processes (for Activation); 000003
    Timeout for parallel process (for Activation): 000300
    Package size (for Activation): 020000
    Task handling (for Activation): Backgr Process
    Server group (for Activation): No Server Group Configured
    All data fields updated in mode "overwrite"
    Resource error. No batch process available. Process terminated
    Time limit exceeded. No return of the split processes
    Resource error. No batch process available. Process terminated
    Request you to kindly help me resolve this issue.
    I am runnning the infopackage manually. Should I run it by a process chain??
    If I run by process chain, I get the following error in 1st step:
    You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
    Awaiting your replies,
    Thanks,
    punkuj...

    Hi,
    I think this problem remains unanswered.
    The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
    Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
    Thanks,
    Sri.

  • Can't rename a folder in Windows 7 - receive error message

    When trying to rename a folder in Windows 7, I get a "Folder In Use" message saying that the folder or a file in it is open in another program.  This is untrue as I don't have any other programs open.  I even rebooted the computer and tried again
    and it gave me the same message.  This has occurred more than once and it's beginning to drive me crazy.  Do you have any suggestions as to how to fix this problem?

    Hi,
    Please use the
    Process Explorer to check which process keeps your file in use.
    In addition, you can try to rename the folder in
    Safe Mode to see the result.
    For more reference,
    Troubleshooting with Process Monitor
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • Error in creation of text indexes and synching with user datastore

    Hi
    has any body encountered error in creating text indexes on 9.2.0.1 with user datastore. you can create them only with no-populate option. however once created after checking-in documents the indexes cannot be synched using ctx_ddl command manually.

    The only thing that I have seen similar to this was worked around by updating the column to itself, then sync...not sure if this is the same thing you are running into, but it may be worth a try. See the Oracle Text FAQ - take special note of step c:
    ===============================
    Creates the index without populating it.
    SQL > CREATE INDEX GLOBALINDEXEDBLOB_I
    ON ODMM_CONTENTSTORE ("GLOBALINDEXEDBLOB" ) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS (' stoplist CTXSYS.DEFAULT_STOPLIST storage IFS_DEF_STORAGE section group IFS_SECTION_GROUP wordlist IFS_DEF_WORDLIST memory 32000000 filter IFS_DEF_FILTER format column FORMAT charset column CHARACTERSET lexer IFS_GLOBAL_LEXER language column LANGUAGE nopopulate');
    b. Mark globalindexedblob column in every row as updated.
    SQL > update odmm_contentstore set globalindexedblob = globalindexedblob;
    c. Sync the index. If you skipped the previous step, then this step does not index content that existed prior to index creation in step a.
    SQL > exec ctx_ddl.sync_index('GLOBA[i]Long postings are being truncated to ~1 kB at this time.

  • BODS : Datastore options for SAP R/3 - need clarity for use

    Hi All.
    Another request to understand the datastore optiono n BOXI 3.1 BODS existing installation.
    We are trying to pull a new table from SAP R/3 into BODS and we find that ABAP program is not getting generated as expected. And terminates. When we tested a simple workflow.
    While creating a new datastore for SAP R/3 Source :
    When we look at the datastore we find the following options for R3 Source ;
    ABAP Execution option :
    Execute preloaded
    Generate and execute
    Under data transfer method we find ;
    Shared directory
    Direct download
    FTP
    Custom transfer
    Then we have working directory on sap server
    local directory
    generated ABAP Directory
    Am testing a simple workflow of pulling data from SAP R/3 in a dev machine.
    But am not understanding.
    which option of ABAP Execution, and data transfer , path would work in co-ordination.
    Because when i say direct download and say generate and execute it throws error.
    Can anyone help me with combinations of the options to choose for a R/3 source. And the implications thereof.
    I had created a folder under local bods server D:\Bodi. And given the path for data transfer.
    But the files are not getting generated for whatsoever reasons.
    Any advise on this would be helpful.
    Also found a bit unusual, that there was no button to test the connection to be correct or not, a TEST connection button is not there. Which i felt, could be included.
    Note : on the existing production system, we have chosen execute preloaded; shared directory on sap server. and shared that folder path for the user and given full rights. But while we try to do the same on the dev machine a test before transporting on production, a simple workflow does not work.
    would like to know what settings on sap server, really affect the data store options on the BODS
    thanks
    indu
    Edited by: Indumathy Narayanan on Jul 19, 2011 4:14 PM

    Indeed, BODS <> SAP connectivity can be tricky.
    For a development environment, I suggest you select the option "Generate and execute" for your "ABAP Execution Option." What this means is that DS will create, on the fly, small-ish ABAP programs. These ABAP programs will be written, in plain text, to a local directory on the DS job server, in the folder specified in "Generated ABAP Directory".  You can see them in there after an attempted job execution, assuming the job involves the creation of an ABAP program.  The ABAP program name is specified in the properties of an ABAP data flow, under Options > ABAP Program Name.  If you can't, perhaps the DS job server process doesn't have full rights to that folder - ?  After being generated on-the-fly, they'll be transferred to SAP to execute.  The SAP user you use to connect to SAP must have sufficient rights to upload-and-execute these ABAP programs, and that's a fairly substantial set of rights. What's required is documented in the BODS supplement for SAP. Often, to get things running, your friendly local Basis admin will grant SAP_ALL to the DS user, to see what rights are being invoked.
    Once all that jazz is working, you need to get the data back. There are a number of ways to do this. The method of data transfer is specified in "Data transfer method," where, ignoring "Custom transfer," you have three choices:
    1) Direct Download: easiest and slowest.  This method tells SAP to attempt to stick data in the client-side folder specified in "Local directory." Try this first.
    2) Shared folder: This is recommended when you have SAP being hosted on a Windows box. Basically: you set "Working directory on SAP Server" and "Data Services path to the shared directory" to point to the same folder.  SAP uses the "Working directory on SAP Server" to find this folder, and DS uses the other setting. So, for instance, if you were going to use the Shared folder method, you could set "Working directory on SAP Server" to "E:\BODS_Transfer", and, assuming E:\BODS_Transfer was shared-out as "BODS_Transfer", you could set "Data Services path to the shared directory" to
    dev12.somecompany.com\BODS_Transfer .  Then, you'd need to setup all the relevant security, as both SAP and DS need rights to read and write files in this folder.
    3) FTP (this is the method I usually use): SAP writes the "transport files" you're after (i.e., the data) in the folder specified in "Working directory on SAP Server". Then, you need to establish ftp connectivity to that folder from the DS job server's perspective, which you do by entering the ftp host name and the path to that folder in "FTP host name" and "FTP relative path to the SAP working directory".  In my opinion, the "relative" business is a little confusing, and I just typically enter the full ftp path, beginning the path w/ a forward slash, like "/usr/sap/tmp/BOBJ" or something like that.  You also need to obtain a separate username and password for the ftp connectivity. Note that this name and password has NOTHING to do with the SAP username and password; you're just setting-up DS to act as an ftp client. I strongly encourage you to test ftp connectivity by using a regular ftp client from the DS job server and attempt to connect to your ftp host using the username and password you were given, and attempting to fetch some sample test file. If you can't do this, manually, then DS won't be able to do it, either.
    Best wishes,
    Jeff Prenevost

  • Logical and Physical Length in Datastore

    I would like to know the differences between logical length and physical length in datastore. Can anyone teach best practices to use them properly?

    Thank you Bouch,
    So usually is it required to set "logical length + 2" for physical length?
    Also, can you show exapmles for sign and dot, which to be added on each columns?
    Regards,

  • Renaming the Physical Filename for Datafiles in SQL Server 2008

    Can anyone tell me how to change the physical filename of the datafiles? There doesn't seem to be any documentation on this, yet its quite easy to change the logical filename.

     There are several ways to make this change, however to rename the physical database files at operating system level you will have to take the database offline
    1. Use SSMS to take the database Offline (right-click on Database, select Tasks, Take Offline), change the name of the files at the OS level and then Bring it Online.
    2. You could Detach the database, rename the files and then Attach the database pointing to the renamed files to do so.
    3. You could Backup the database and then restore, changing the file location during the restore process.
    4. using T SQL
    ALTER DATABASE databaseName SET OFFLINE
    GO
    ALTER DATABASE databaseNAme MODIFY FILE (NAME =db, FILENAME = 'C:\Program
    Files\Microsoft SQL Server\MSSQL.2\MSSQL\Data\db.mdf')
    GO
    --if changing log file name
    ALTER DATABASE  databaseNAme MODIFY FILE (NAME = db_log, FILENAME =
    'C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\Data\db.ldf')
    GO
    ALTER DATABASE databaseName SET ONLINE
    GO
    for more info http://technet.microsoft.com/en-us/library/ms174269.aspx

  • File renaming in Sender file adapter usins OS command

    Hi Guys ,
    Can anyone explain on how to use the rename command in Sender file adapter using OS command parameter.
    Thanks,
    KC.

    Hey
    run the following OS command
    mv <originalFileName> <newFileName>
    This command will copy the <originalFileName> to a new file called <newFileName> and will delete the <originalFileName>
    There is no rename command in Unix,mv is used to rename the files
    Thanx
    Aamir

Maybe you are looking for