Renamed product

Hi Friends,
I just got back from long vacation :) , I'm surprised that HTMLDB was
rebaptized as APPLICATION EXPRESS,. Would u know when did this
happened?
This is my first time to ask/use a provisioned WORKSPACE from OTN htmldb
admin. But when i installed the inaugural address demo, i got the ff. error>>>>
ORA-20001: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-50857: oracle error in dreii0fsh ORA-01653: unable to extend table KRISHEL124.DR$PRESIDENTS_DOCS_CTXIDX$I by 8 in tablespace FLOW_867 <<< end
How do i ask the OTN htmldb admin to increase size of my workspace ?
Thanks a lot

Thanks Friend,
I already did what you told me, and requested for additional 10MB storage but it just prompt something like:
* YOU HAVE REQUESTED AN ADDITIONAL 10BM OF SPACE.
And nothing happens, When I rerun the demo install of inaugural address, i still
get same space probelm error.
Thanks again

Similar Messages

Batch rename of queries ?

We are starting our upgrade of HCM 8.9 to HCM 9.0. Our end users have written over 10,000 queries with very little naming convention - usually just starting with their initials. Our University is 'Sonoma' so we want end-users to rename the ones they want to keep to start the first 4 chars with 'SON_' and make them public. This way as the DBA my job is easier to put them into a project and move them to 9.0. end-users complain that it's 'too much work', because some of them have written hundreds of queries.
Is there a way to batch rename them using a SQL script - the problem I see is that there are many query tables they exist in, eg, PSQRYDEFN, PSQRYFIELD, PSQRYRECORD, and many views also so I am worried that trying to rename them by adding 'SON_' to the beginning would miss some tables and screw things up.
I would be interested to hear other folks query strategies during upgrades.
Thanks,
Allen Cunningham
DBA Sonoma State University

I guess my first response would be, Do you really want 10,000 public queries? In our environment only the development team and those functional users that are associated with the development team have the ability to create public queries. Once a query is made public, it's the development team's responsibility to support it. No doubt you've got at least a couple of users that have created some poorly written queries. You probably don't want to support those.
Secondly, upgrades are a time for clean up. At the very least I think I would go ahead and ask them to review their own queries. If they find that they have a query that is useful to other users, offer to make that public for them and have the team support it. I would also have them consider deleting queries that they no longer use. In reality, we didn't care about the naming conventions for private queries. The whole idea of the convention is to be able to separate our queries from the delivered ones. With private queries it's pretty easy to make that distinction.
Third, I would categorize the queries more than just prefixing them with your organization. We are on an HRMS version so our queries are prefixed by HR, PR, TL, BA, etc. A little more categorization to the queries should be helpful so you don't have to scan 10,000 queries for the one you are looking for. Of course I would only do this for the public queries.
In our upgrade from 8.3 to 9.0 I ran each of our public queries for efficiency and validity. It was over 1,000 queries and took several weeks to get through them all. After that we went back to some of our power users and offered to assist them with queries that would no longer work (i.e. tables that no longer existed in the system).
One final thought. Have the users make the changes in your existing production database now. During our upgrade some effort was made to rename production queries. In one of our final copies of production we had these new queries come in that we had to redo simply because the name had changed.

2 questions: seebeyond cert and courses attended.

1. Many moons ago I got certified with a company called seebeyond on a product called e*gate. seebyond was bought by sun. sun was bought by oracle. Can I get the e*gate cert under my Oracle certification?
2. Ive attended many Oracle instructor courses over the years but have lost track of some of them. I rang oracle education but they say they need more info other than my name to track what courses I have ever attended. I was looking for a course to supply to the form submission for a particular certification but the person I talked to in Oracle was unable to search for my course attendance by my name alone. What can be done?

Brandye Barrington wrote:
1. When we bought the Sun Certification program into the Oracle Certification program, there was no e-gate certification included on Sun's side. This may have been a niche certification that Sun retired long ago. So to answer your question, no. Unfortunately, this is not a recognized certification under the Oracle Certification program.This is the egate stuff. Still used a lot in healthcare.
http://docs.oracle.com/cd/E18867_01/5.0.x/5.0.5/CoreProducts/Sys_Admin_Guide.pdf
havent had to look for it in a long time so hadn't noticed sun didn't carry it over when they took over seebeyond in 2005. Is there any legacy seebeyond certification for the ican suite, it was the renamed product suite name for the later versions of egate?
>
2. Matthew is correct in that the course that you are trying to submit should be in the list of approved courses for the certification you are pursuing. It is extremely difficult to locate training records based on name alone. If you have the course completion certificate, that will be best. You can either fax it to us or scan an email it. However, if you have the course completion certificate, you probably have all the info that you'll need to submit the course form. I suggest that, if you have taken a course that will count as approved training toward the certification you are pursuing, you contact Oracle Certification Support http://bit.ly/KMsuH3 and give them the details of the course - course name, your full name, rough dates that you attended the training - any info that may help them locate the records - and see if they can locate the training record.
is there not a database that you could run this from?
select all_courses_Attended
from courses
where first_name = 'xxx'
and second_name = 'yyyy';
and paper_certificate = 'lost'
and tried_hard_to_find_it_but_just_couldnt = 'true'
order by date;
no problem. back to the drawing board then, Ill start digging through the paperwork and mails again see can I find anything.

Renaming a Product in SLD

Hi All,
I have two products in the SLD, Product1 and Product2, Product1 has SW1 and SW2. All the development is done in the SoftwareComponents of Product1. I need to get the same with Product2, i.e something like assign SW1 and SW2 of Product1 to Product2. Is there a way to achieve this without recreating the IR objects.
The actual requirement is to RENAME Product1 to Product2. Is there a way to achieve this or could you help with the solution suggetsted above. We are using PI 7.0
Regards,
Chandra

Hi Sarvesh,
using the configurator in the Integration Directory will save some time. After reimporting the Business System you let the configurator reconfigure receiver determinates, interface determinations and so on.
Regards
Thomas

Renaming Oracle Tables in Production

If you need to rename Oracle tables in Production, then which process is most effective:
A.
LOCK TABLE xxx IN EXCLUSIVE MODE
RENAME xxxTO new_name;
Table renamed.
B. dbms_redefinition
C. other ...
THANK YOU !!

All we can say is that dmbs_redefinition is an option to consider. Only the OP knows his environment, what kind of window the work will have to be done in, and the timing issues between the renames and moving in new code. Such as in the case where you need the new object names in place to perform java compiles to move in new classes.
At my current job we would take a window and shut the database down, bring it up in restricted mode, perform the renames of the tables (and associated indexes for standard purposes), move the code into place, and then test. Full testing might require unrestricting the system or we might be able to just grant restricted session to a few users. Once we are satisified we would fire up our daemon processes and then release the batch schedule.
IMHO -- Mark D Powell --

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

Unable to collect Product Return History using legacy collection

Hi,
I am facing issue in collecting product return history using legacy collection, File Upload (User File Upload) & Loader Worker erroring out as below. As I observe, its inserting space after .ctl, .dis & .bad file path.
Can some one guide me how to reslove below issue.
Loader Worker
Argument 1 (CTRL_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .ctl
Argument 2 (DATA_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849PrdRetHist.dat
Argument 3 (DISCARD_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .dis
Argument 4 (BAD_FILE) = /u02/oracle/xxxxx/inst/apps/rights_apps/logs/appl/conc/out/5913849MSD_DEM_RETURN_HISTORY .bad
Argument 5 (LOG_FILE) =
Argument 6 (NUM_OF_ERRORS) = 1000000
===================================================================
plan_id:0 plan_type:0 planning_engine_type:1
Creating dummy log file ...
Parent Program Name: MSCLOADS
This is NOT as part of a Plan run.
NLS_LANG original American_America.AL32UTF8 alt American_America.UTF8
LRM-00112: multiple values not allowed for parameter 'control'
SQL*Loader: Release 10.1.0.5.0 - Production on Tue Mar 11 19:58:20 2014
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-100: Syntax error on command-line
Program exited with status 1
APP-FND-01630: Cannot open file /u02/oracle/xxxxx/inst/apps/rights_apps/appltmp/OFq98wrx.t for reading
Cause: USDINS encountered an error when attempting to open file /u02/oracle/xxxxx/inst/apps/rights_apps/appltmp/OFq98wrx.t for reading.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
***** End Of Program - No title available *****
File Upload (User File Upload)
Tue Mar 11 19:57:52 RET 2014: Profile 'MRP_DEBUG' Value : N
Tue Mar 11 19:57:52 RET 2014: ===============================================================
Tue Mar 11 19:57:52 RET 2014: fileLoaderInit: paramName = pLOAD_ID; paramValue=41563
Tue Mar 11 19:57:52 RET 2014: ===============================================================
Tue Mar 11 19:57:52 RET 2014: The control file Path /u02/oracle/xxx/apps/apps_st/appl/msc/12.0.0/patch/115/import/MSD_DEM_RETURN_HISTORY .ctl does not exist. Please contact your System Administrator
Regards,
ML

Hi,
Login to unix server and I believe the control file is placed in a custom top say $MSC_TOP in your environment.
just try to rename the ctl file without the MSD_DEM_RETURN_HISTORY<space>.ctl
And try to upload the file once again.
Hope this helps...!!!

No products in Extension Manager

Hi,
i'm a user of the Adobe Photoshop CS 6 (13.1.2) based on the subscription service in Creative Cloud.
As you can see, my photoshop got the latest updates.
I wanted to install the Adobe Exchange panel and ran into a lot problems. It wasn't possible to install it over the extension manager (manifest error, because my photoshop is too "new").
When i wanted to give up i read on Facebook, that you can install the Panel over the Adobe Application Management.
So i did and was happy it's running finally.
Now when i want to install "Adobe Paper Texture Pro" for example, the panel downloads the file and starts to open the Extension Manager.
(The extension manager is up2date too, no updates available over Appl. Mnmgt).
The Manager opens and tries to install the extension. But then i always (with every extensions tried) got a message, that Photoshop 12.0 or 13.0 or higher is needed to install the extension.
Huh? My photoshop version is the latest version
The extension manager is not showing any products there. I reinstalled the extension Manager manually with the latest version of the adobe page, but this didn't help.
I'm using Windows 7.

Have you ever moved or renamed the installation folder of PS and other products? Please run "Adobe ExtendScript Toolkit CS6" from Start Menu, input "BridgeTalk.__diagnostics__;" (Two underscores, not including double quotation mark) in the Source window then click "Debug"->"Run" or press F5. Check output in the Javascript Console window. Check whether "Path" of "photoshop-60.032" or "photoshop-60.064" are consistent with actual installation path.

Downloads for different products e.g., Crawler Web Security won't take

I attempted to download different toolbars and products such as from Crawler's Spyware and Web Security without any luck. It goes through the usual set-up windows and a window opens up to say that the downloads have been successfully completed. I cannot find them!

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

New X1 carbon (2014) - NOT a productivity tool any more

I was a big fan of thinkpad X-serie and owned 8 or 9 of them.
Purchases nx1c and thought that it'll be my baby for next two years, but now I am thinking to return it since I buy it for work, not to use as an iPad.
Below are some pain points, and hopefully the New New X1 carbon will get right on them.
1. Adaptive keyboard seems to be fancy idea, but works horrible
(1) Delay introduced by switching keyboard layouts to perform some common tasks
- e.g. F2 to rename/F5 to refresh/Alt+F4 to close/...
- e.g. F5/F7/F9/F10/F11/F12 in coding with visual studio
- e.g. Snipping tool is only available in browser mode, but I need it somewhere else
(2) Delay introduced by the easiness to misclick
- e.g. during debugging, need frequently click F10/F11/etc.. Without looking down, I can't make sure I clicked the right key, and I have to be carefully not swiped over the next key which sometimes mean I have to do the whole thing over
(3) No way to program or delete certain layouts
- I am not a meeting guy, may I remove the web conference layout for fast-switching between modes?
- Snipping tool is really too limited, and I want program it call original PrintScreen, but there's NO way
- Some features are there just for being "fancy", like swiping before webcam to go prev/next page, really wish I can replace them but again, NO way
2. An epic fail in the keyboard change.
I am okay to put some time to get use to some minor changes, but big changes (HOME/END at left), removing some commonly used keys (PrintScreen, Break, Insert), that's too much.
3. TrackPoint without physical buttons are far less convenient. When using TrackPoint, single tap on touchpad to click doesn't work, seems by design - but a bad one.
4. Touchpad: tap with the side of thumb will easily move the mouse cursor upwards and away from the original target position.
5. Windows8 displays horribly in high dpi
6. The power adapter for old thinkpads doesn't work with nx1c, but no adapter tips are available
7. 9 hours? I got slightly over 5 hours max.
In short, the designer goes too far to make nx1c slim and fancy, and now it is not a productivity tool anymore.
Solved!
Go to Solution.

I can't really share any of the complaints.
Compared to my T430s this is just the machine I was looking for. Although I tweaked the T430s into a dual SSD machine (getting rid of a useless CD/DVD combo) I was looking for something slimmer and lighter. The X1 Carbon has a wopping 500G SSD (more than the dual I had) has a far better screen (the T430s has horrible viewing angles and colarization due to the TFT) the IPS is so much better. I don't see any bleed on the side of the screen either.
The X1 shaves off 500g, and is much tinner (but has less ports). The one thing I liked, very much, on the T430 are the connection at the back instead of front, but I think I can live with the power plug sticking out at the left side, although that is were my mouse is.
No; I pretty happe with the Fedora 20 on my X1

Change description of Product Type Dropdown in SRM 7.0

Hello,
We are upgrading to SRM 7.0 and have a requirement where we need to rename the decription of Product type (dropdown) "Materials" to "Goods" on the "Describe Requirement " screen.
We tried modifying the value table COMC_PR_TYPE_T which stores these values however the change did not reflect on the Web dynpro side. This seems to be like a buffering issue however we are not sure.
Does anybody have any idea why system is behaving this way? or is there any other way of doing it?
Thanks

HI,
Did you solve the problem? Iu2019m facing with the same issue. Iu2019ve thought also that maybe the AS or the portal buffers the dropdown values, but now Iu2019m not sure about this. Please help, if you know the answer.
Thanks,
Roland

Opportunity Product-Revenue related information section

Hi,
We are going to use the 'Product Revenue' related information section on the Opportunity for Products & Services. Hence, we want to rename this section to 'Products & Services' instead of 'Product Revenue'. I tried to change the name of the Object Type Revenue, but that is not possible using the 'Rename Object Type' function. Does anyone know whether it is possible to change the name and how to do it.
Thanks.
Kind regards,
Niels Rekers

Hi,
Thanks for the quick response.
Is it known when it will be possible? Is that with R16 and when will that Release be released?
Kind regards,
Niels Rekers

Error while renaming column in Apex 3.2.1

Hi,
I am getting the following error while renaming column in Oracle Apex 3.2.1 through SQL workshop:
"ORA-24344: success with compilation error"
Interestingly, it only gives an error when I rename the column again to its original name. For example, if I renaming the column X to X1 (no problem) but renaming back to X, I get this error. Same is true for X to X1 to X2 without any issues but renaming back from X2 to either X1 or X, I get the same error.
Any insight into this issue would be very helpful and greatly appreciated.
Thanks,
Milaan

I've moved a step ahead, getting the new apex screen at http://127.0.0.1:8080/apex/ and can also login to my application. However there is no image for Application Express on http://127.0.0.1:8080/apex/ and I cannot click on the Login button. Hitting http://127.0.0.1:8080/i/ does list down the images. Any clue on what could be the problem?
For others reference: I'm not sure what was wrong, but I tried the entire steps again, with the 2 changes: shutdown the listener and job process ( in step 3.1) before running 'apexins' and second that I installed on SYSAUX and not USERS (in step 4)
1. Downloaded apex_3.2.1.zip to C:\Software
2. unzip apex_3.2.1.zip to C:\Software\apex
3. started command prompt and set these variables
set ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
set ORACLE_SID=xe
set ORACLE_PATH=C:\oraclexe\app\oracle\product\10.2.0\server\bin
set LD_LIBRARY_PATH=C:\oraclexe\app\oracle\product\10.2.0\server\lib
3.1 Shutdown the listener and job services
4.
sqlplus /nolog
CONNECT SYS as SYSDBA
@apexins SYSAUX SYSAUX TEMP /i/
5.
sqlplus /nolog
CONNECT SYS as SYSDBA
@apxchpwd
6.
Stopped and Started the Database, also the listener and job processes
7.
sqlplus /nolog
connect sys as sysdba
@apxldimg.sql c:\software
8.
sqlplus /nolog
connect sys as sysdba
exec dbms_xdb.setListenerLocalAccess (l_access => FALSE);

Can anyone disambiguate all the various product names?

One thing that bugs me about Oracle is the have such a great love for 1) Giving EVERYTHING its own separate name, 2) Making those names really unhelpful as to what exactly the software does, and 3) assigning version numbers AND release levels AND update levels, so you end up with really simple names like "Oracle Enterprise Manager Ops Center Grid Cloud Control 15q, Release 4". Obviously I'm exaggerating a very little bit, but that's how it seems sometimes. And as far as I can tell, there's no document that says exactly what each one is, exactly what it does, how it's different from others, and how they all relate to one another. Is Grid part of Enterprise Manager? How about Cloud Control? Do you have to install them all? The answers may be obvious to some people, but hardly intuitive for those just starting to use them. And then of course on top of that, it seems like every other version they rename everything, place it under some other product line, and just expect you to know somehow. And of course you often find documents around the web and within Oracle's docs that refer to older versions, often by different names. Does the naming insanity ever stop? Every time I think I'm getting a handle on it, Oracle re-brands things somehow. And naturally every single product in the entire company has to start with "Oracle...", because if they weren't, someone might forget who made it.
This is really confusing and annoying and you're just supposed to magically know it somehow. And when new versions come out. And where to download them. Oh, you can set stuff up to do that automatically? Would that be in Cloud Control, Grid, or Ops Center? Which version and which revision? From which of Oracle's several different places to download stuff? Sure, it's simple to find all kinds of marketdrone babblespeak papers about "stack integration" and how wonderful Oracle is and how slick everything will be and how cool Oracle products are and how awesome the integration is... but really frigging hard to find specific information about what the products do, how they relate to each other, what versions and releases there are, what the past and current versions are, when new versions are coming out, any name changes, and so on. there's no road map for all this stuff, apparently you're just supposed to read Every Single Press Release oracle puts out and spend half your life piecing it all together.
Did it never occur to the marketing drones that maybe, just maybe, all this branding babble is really confusing to everyone? To the media, to the people who use their products? That maybe it's annoying for p[eopel to waste valuable hours just combing through a billion web pages and white papers and press releases just to try to figure out which softwasre product out of ten thosuanmd that you need, and what the most recent version is, and how it relates to other products in the family?
Having said all that - sorry for getting off on a rant - what is the deal with Cloud Control? And Grid? And Enterprise Manager? And Ops Center? What is the structure/relationship? What are the most recent versions? When is the version of Ops Center that supports Solaris 11 and the new virtualization coming out? Will that be a new version of Enterprise Manager, or of Ops Center? Will it be a version number change or a release level change?
Not that I'm bitter or anything.

I feel your pain, so many sales stuff to work through to get to the good stuff
here's my very simplistic interpretation
Cloud control = anything with a "c" behind the name - eg 12c
Grid control = anything with a "g" behind the name - eg 11g
oracle enterprise manager is the product that comes from Oracle to manage the database layer from the operating system upwards , (eg software components) - latest version 12c something
ops center, or oracle enterprise manager ops center is a product that came from Sun to manage the OS, hardware level and down (eg hardware components) - latest version 11g update 1 release 3
currently these two products, OEM and OEM Ops Center are 2 seperate installs
I also believe that Oracle only make roadmaps available on request
The only sites where you are going to get any official info is from the oracle websites
www.oracle.com
edelivery.oracle.com
support.oracle.com
docs.oracle.com
etc

How to rename existing members in an Essbase Outline

Hi there,
I would like to do as follows:
1. List all members at Level-0 of a specified dimension (or parent member) that have names matching a wildcard string. e.g. names begining with 'JWC'.
2. Delete the Level-0 members that satisfy the above condition. I must verify the list from 1 above before deleting the members.
3. Rename remaining/existing members at Level-0 of the dimension (or parent member) specified above by attaching a required prefix to the existing name.
Note:
1. I am working with an historical cube and I must preserve past year data. Hence I cannot select "Remove Unspecified" on the dimension build rule as my current data set contains data for current year only.
*kp> The level-0 members that I need deleted contains data for current year only, hence I can safely delete them.
2. I am expecting some sort of script/s (CALC or Maxl?) that will allow me to do the above tasks (List, Delete, Rename) without any manual input.
3. I must get this done by 31 Jan and before rolling out the oldest year data. Hence I urgently need your help here!
Kind regards,
Kamlesh.
Message was edited by:
user616142

Thank you for your response. Being a novice, I must
say that I am quite hesitant in taking steps that I
am unfamiliar with, esp when dealing with a
production cube that takes about 6hrs to load when I
have a limited timeframe! However with additional
guidance (see my kp>comments below), I may be able to
try your method.No problem, we were all novices once upon a time ;-)
> - export the outline using the Olap Underground
Outline Extractor
(http://www.appliedolap.com/default.asp?ID=51)
p> Can I export the outline to just any location as I
believe it will simply be a text file?Correct.
> - do the necessary clean up to the exported
outline text file
kp> If this is the same delete & rename steps I want
done, then I need help on some kind of script that
will allow me to do this as it involves 1000s of L0
members. (I am also considering the tips from Glenn)
> - make a backup of your cube
kp> I did. Just curious - the L0 members that I need
deleted have actually been added via a change I made
to the dim build rule. I had saved the cube folder
before running the rule. I would normally restore the
entire folder so that all components are in sync.
Just one doubt: can I copy/paste the changed dim
build & data load rules to another location, restore
the cube from backup, and then simply copy/paste the
saved rule files to replace the old ones? This will
save me from having to delete the new L0 members.My suggestion is to tear down and rebuild based upon the edited outline export. If you find it easier to work in the outline directly, or to modify your load rules, that is your choice.
> - export L0 data in columns from cube
kp> Will the same Olap Underground Outline Extractor
utility enable me to do this?No, this is a standard operation in Essbase. You should be able to do an export either from a MaxL session or from the console. Check the docs for details.
> - build a load rule to load the export (so you
can ignore errors from records that will no longer
load)
kp> Is there anything I need to be aware of here as I
must get all the data reloaded onto original cube.If the members to be deleted have no data, then there should be no errors. If they do have data but the members will not be rebuilt, you will have to redirect where the data should load to. That will either mean editing the load data to point to the new member names, using alternate aliases, or recreating the load data for the new member names. Hard to be more specific as you situation may vary.
> - reset and rebuild the cube using the edited
outline export file
kp> I am assuming I can manually delete the parent
members and then run the rule based on the export
file to rebuild the dimensions?Yes, the idea is to edit the outline text file to meet your new requirements and then to build the cube again. You can either manually clear the dimension of all members or rebuild with the revised outline file using a Remove Unspecified option load rule.
>
Thank you for your suggestions.
Regards.Hope it helps. Be sure to document the actual steps you use for the next time you have to do this (and there will be a next time, trust me ;-)

Renamed product

Similar Messages

Maybe you are looking for