Render PDF: connection refused
Hello,
Im working through the technical note of rendering oracle HTMLDB to PDF.
Last Step 7(go figure...)
When I click on the link Output to PDF Document
I get a popup message stating, The connection was refused when attempting to contact xxx.xxx.xxx.xxx:8888.
I tried to telnet into it with this result Could not open a connection to host on port 8888: Connect failed. Tried netstat l | grep 8888 tells me that nothing is listening on port 8888.
I followed the Tech note.. Why is port 8888 giving me so much trouble and how can I fix it?
System setup
RedHat 3 AS
Oracle 10g 10.1.0.3.0
HTMLDB 1.6
Thanks,
Datalife
Hi,
You can upgrade to 7.7+ but if you require a root cause analysis I suggest you to open a TAC case.
Regards,
Luis Silva
Similar Messages
-
Fastest Way to Render PDF from XML
Hi
I have used XSLTC(pre-compiled XSL files) to render PDFs.Parser i have used are the latest from XALAN.
Using FOP 0.20.5
Using JAXP 1.3 i am using the validate framework for validating XMLs against XSDs.
This is the fastest approach which i could possibly come up with for rendering XMLs into PDFs
I am just wondering..with so many API etc available is there any accepted fastest way of Rendering PDFs through XML.
I mean this should also take into account the rendering capability of the transformers.
Any insights would be welcome.
Thanks.Logging and Capturing? Or Logging and TRANSFERRING? This being P2...I'll assume the latter. It should take about a gig a min to transfer...the same time needed to back up a card.
But you are L&T right from the camera...so I assume that you are not backing up the footage...just importing? Why not back up? That's step #1. Unless you are backing up later. Connected to the computer via USB or Firewire? And the drive is connected to the computer how? USB or Firewire? -
Connection refused Abobe interactive form
Hi all,
I recieve the following error when I try to run my adobe for over web services.... I cannot understand why since all wsdl files etc are available..
Any ideas?
Cheers,
Max
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:418)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:100)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:123)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:248)
... 48 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
com.sap.exception.io.SAPIOException: <Localization failed: ResourceBundle=com.sap.exception.io.IOResourceBundle, ID=Could not create SSL socket:java.net.ConnectException Connection refused: connect, Arguments: []> : Cant find resource for bundle java.util.PropertyResourceBundle, key Could not create SSL socket:java.net.ConnectException Connection refused: connect
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:408)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3948)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:148)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
... 51 more
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
com.sap.exception.io.SAPIOException: <Localization failed: ResourceBundle='com.sap.exception.io.IOResourceBundle', ID='Could not create SSL socket:java.net.ConnectException Connection refused: connect', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Could not create SSL socket:java.net.ConnectException Connection refused: connect
at com.sap.tc.webdynpro.adsproxy.SecConfigBindingStub.rpData(SecConfigBindingStub.java:89)
at com.sap.tc.webdynpro.adsproxy.SecConfigBindingStub.rpData(SecConfigBindingStub.java:99)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:385)
... 54 more
Caused by: com.sap.exception.io.SAPIOException: <Localization failed: ResourceBundle='com.sap.exception.io.IOResourceBundle', ID='Could not create SSL socket:java.net.ConnectException Connection refused: connect', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Could not create SSL socket:java.net.ConnectException Connection refused: connect
at com.sap.engine.services.webservices.jaxm.soap.SSLUtilUsingHttpsLibImpl.createSSLSocket(SSLUtilUsingHttpsLibImpl.java:93)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initStreamsFromSocket(HTTPSocket.java:667)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initializeStreams(HTTPSocket.java:470)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getOutputStream(HTTPSocket.java:427)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:355)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:550)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1432)
at com.sap.tc.webdynpro.adsproxy.SecConfigBindingStub.rpData(SecConfigBindingStub.java:82)
... 56 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:464)
at java.net.Socket.connect(Socket.java:414)
at java.net.Socket.<init>(Socket.java:310)
at java.net.Socket.<init>(Socket.java:125)
at iaik.security.ssl.SSLSocket.<init>(Unknown Source)
at com.sap.security.core.server.https.SecureConnectionFactory.createSocket(SecureConnectionFactory.java:984)
at com.sap.security.core.server.https.SecureConnectionFactory.createSocket(SecureConnectionFactory.java:969)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.jaxm.soap.SSLUtilUsingHttpsLibImpl.createSSLSocket(SSLUtilUsingHttpsLibImpl.java:77)
... 63 moreHi Thanks for your reply!
When I run the test from the j2ee engine that runs the ADS it works fine but when running the test from the j2ee that runs the WebDynpro application i fails with content type text/html, any ideas why?
rgds,
Max -
When I try to log in from desktop I get "Connection Refused" message. How do I fix this?
I tried to activate Mozilla Firefox today using the normal & routine method, clicking on the Firefox Icon.
Each time I tried I got the same message "Connection Refused".
I went to the Firefox site and read the message regarding disabling Java, so I opened ADD ONS and Plug Ins and disabled Java.
Still no change, so I shut down and restarted my computer.
I keep getting the same Connection Refused message.
What needs to be done to restore Firefox?Another user also reported a problem with the AT&T Yahoo home page in the past few minutes. When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
Connection refused when trying to getOutputStream from https connection
Hi all !
I want to make an https connection with a server to send/get the request/response
What can be the cause of the following error in the following code testHttps.java?
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
at Test.testHttps.main(testHttps.java:46)
Exception in thread "main" java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at Test.testHttps.main(testHttps.java:51)
testHttps.java
package Test;
import java.io.;
import java.net.;
import javax.net.ssl.*;
public class testHttps {
public static void main(String args[]) throws Exception {
//System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
// Create a trust manager that does not validate certificate chains
TrustManager[] trustAllCerts = new TrustManager[]{
new X509TrustManager() {
public java.security.cert.X509Certificate[] getAcceptedIssuers() {
return null;
public void checkClientTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
public void checkServerTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
// Install the all-trusting trust manager
try {
SSLContext sc = SSLContext.getInstance("SSL");
sc.init(null, trustAllCerts, new java.security.SecureRandom());
HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
} catch (Exception e) {
System.out.println("Error" e);
// Now you can access an https URL without having the certificate in the truststore
try {
URL url = new URL("https://..............");-->//address of the server given here
URLConnection conn = url.openConnection();
HttpsURLConnection urlConn = (HttpsURLConnection) conn;
urlConn.setDoOutput(true);
OutputStreamWriter wr = null;
try{
wr = new OutputStreamWriter(conn.getOutputStream());
catch(Exception e){
e.printStackTrace();
BufferedReader in = new BufferedReader(new InputStreamReader(urlConn.getInputStream()));
String str;
while( (str=in.readLine()) != null) {
System.out.println(str);
} catch (MalformedURLException e) {
System.out.println("Error in SLL Connetion" +e);
HostnameVerifier hv = new HostnameVerifier()
public boolean verify(String urlHostName, SSLSession session)
System.out.println("Warning: URL Host: " urlHostName " vs. "
session.getPeerHost());
return true;
want to ignore certificate validation.
plese help me..
hi brucechapman, as you suggested me, i posted in Core API- networking forum, now please gimme a solution
Thanks in advance.hi brucechapman,
ran the NetTest program, got the following exception:
trigger seeding of SecureRandom
done seeding SecureRandom
Exception in thread "main" java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at java.net.URL.openStream(Unknown Source)
at Test.NetTest.main(NetTest.java:40)
NetTest.java:40 -- InputStream is = url.openStream(); at this ling throwing exception.
For the following program, i have added the argument -Djavax.net.ssl.trustStore=cacerts
i have exported the certificate from IE and added to the keystore.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.security.Security;
import javax.net.ssl.SSLSocket;
import javax.net.ssl.SSLSocketFactory;
public class Communicator {
public static void main(String[] args) {
try {
int port = 34443;
String strReq = "xml content ";
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
SSLSocketFactory factory = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket socket = (SSLSocket) factory.createSocket("jyoti-win2k8-32", port);
//Writer out = new OutputStreamWriter(socket.getOutputStream());
//out.write("GET http://" + "hostname" + "/ HTTP 1.1\r\n");
// out.write("\r\n");
//out.write(strReq);
//out.flush();
OutputStreamWriter wr = null;
try{
wr = new OutputStreamWriter(socket.getOutputStream());
catch(Exception e){
e.printStackTrace();
System.out.println("got output stream");
try{
wr.write(strReq);
//System.out.println("response code : "+conn.getResponseCode());
System.out.println("written");
wr.flush();
catch(IOException e){
e.printStackTrace();
InputStreamReader is = new InputStreamReader(socket.getInputStream(),"UTF8") ;
BufferedReader rd = new BufferedReader(is);
String line;int count=0;
System.out.println("rd "+rd);
while ((line = rd.readLine()) != null) {
System.out.println("line "+line );
System.out.println(count++);
// Process line...
System.out.println(count);
rd.close();
BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
int c;
while ((c = in.read()) != -1) {
System.out.write(c);
//out.close();
in.close();
socket.close();
} catch(IOException ex) {
ex.printStackTrace();
Exception :
javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
at sun.nio.cs.StreamEncoder.writeBytes(Unknown Source)
at sun.nio.cs.StreamEncoder.implFlushBuffer(Unknown Source)
at sun.nio.cs.StreamEncoder.implFlush(Unknown Source)
at sun.nio.cs.StreamEncoder.flush(Unknown Source)
at java.io.OutputStreamWriter.flush(Unknown Source)
at Test.Communicator.main(Communicator.java:55)
Caused by: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(Unknown Source)
at sun.security.validator.Validator.getInstance(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
... 7 more
Caused by: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at java.security.cert.PKIXParameters.setTrustAnchors(Unknown Source)
at java.security.cert.PKIXParameters.<init>(Unknown Source)
at java.security.cert.PKIXBuilderParameters.<init>(Unknown Source)
... 19 more
java.net.SocketException: Socket is closed
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getInputStream(Unknown Source)
at Test.Communicator.main(Communicator.java:66)
please help me and provide me suggestion/solution. how to get rid off this trustanchor paramater exception
what is it actualy?
Thanks in advance. -
Problems with SSH: Connection Refused
Greetings fellow Arch users,
I have hit a bit of a snag that I could really use some extra help getting around. I've tried everything I can think of (and everything that Google thought might work) and I have my back rather against a wall, so I thought I'd come here to see if anyone can offer some advice.
To make a long story short, I am a college student and am attempting to set up an ssh server on a desktop at my house so I can access it remotely from the college. I have the computer set up and the server running, however I am having difficulty making connections to it from my laptop. I know that the server is running, because I can log into it both from the server itself (sshing into local host) and from my laptop when I use the internal IP address.
The server is on a static IP address within the network(192.168.0.75), and my router is configured to forward TCP port 1500 to it (I'm using 1500 as the port for my ssh server). However, when I attempt to log into the ssh server using my network's external IP address, the connection is refused. I used nmap to scan my network and found that, even though the proper ports are forwarded to the proper place as far as my Router's configuration interface is concerned, port 1500 is not listed as one of the open TCP ports. I also, to test it, temporarily disabled the firewalls on both the server and the client. That didn't help. The command that I am running is:
ssh -p 1500 douglas@[external ip address
As I am really not sure what is causing this problem, I don't know what information to provide. So here is everything that my inexperienced mind sees as likely being important. If you need anything more, let me know and I will do my best to provide it.
Here is the sshd_config file from my server.
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Port 1500
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
The ouptut of ip addr when run on the server:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:9b:3a:be:94 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.75/24 brd 192.168.255.0 scope global enp8s0
valid_lft forever preferred_lft forever
inet6 fe80::221:9bff:fe3a:be94/64 scope link
valid_lft forever preferred_lft forever
Here is the output from running nmap on the network:
Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-28 21:05 EDT
Initiating Ping Scan at 21:05
Scanning address [2 ports]
Completed Ping Scan at 21:05, 0.01s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 21:05
Completed Parallel DNS resolution of 1 host. at 21:05, 0.05s elapsed
Initiating Connect Scan at 21:05
Scanning pa-addresss.dhcp.embarqhsd.net (address) [1000 ports]
Discovered open port 80/tcp on address
Discovered open port 443/tcp on address
Discovered open port 23/tcp on address
Discovered open port 21/tcp on address
Completed Connect Scan at 21:05, 4.08s elapsed (1000 total ports)
Nmap scan report for pa-address.dhcp.embarqhsd.net (address)
Host is up (0.036s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
80/tcp open http
443/tcp open https
8080/tcp filtered http-proxy
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 4.19 seconds
Here is the ssh_config client-side:
# $OpenBSD: ssh_config,v 1.27 2013/05/16 02:00:34 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
Output of ssh -v during connection attempt:
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 1500.
debug1: connect to address address port 1500: Connection refused
ssh: connect to host address port 1500: Connection refused
Thank you guys ahead of time. Getting this server operational is hardly critical, it is just a side project of mine, but I would really like to see it working.
Douglas Bahr Rumbaugh
Last edited by douglasr (2013-09-29 02:58:56)Okay, so I finally have the opportunity to try and log in from a remote network. And. . . it doesn't work. Which is just my luck because I now need to wait an entire week, at least, before I can touch the server again. Anyway, running ssh with the maximum verbosity I get this output:
douglas ~ $ ssh -vvv -p 2000 address
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 2000.
debug1: connect to address address port 2000: Connection timed out
ssh: connect to host address port 2000: Connection timed out
It takes a minute or two for the command to finish with the connection timeout, as one would expect. And yes, I am reasonably sure that the address that I am using is my home network's external IP. It is dynamic, but I checked it before I left which was just over an hour ago. I guess that it may have changed. I'll know that for sure in the morning, when my server sends me an automatic email with the network's current address. In the meantime I am operating under the assumption that the address I am using is correct. What else could be the problem? -
Hi to you all,
I work with iAS 6.0 sp2 on Solaris.
For 1 day, I get that exception when trying to deploy or remove my modules (servlets + JSP) with the iasdeploy tool :
Exception while createXmlDocument()
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native method)
at com.netscape.server.deployment.WebbAppReg.run(compiled code)
at com.netscape.server.deployment.WebbAppReg.main(Unknown source)
The war archive is put in the JAR directory, unpacked in the APPS/modules directory, but the servlets of the module have the null GUID in the registry ({000000 000000 000000}. And so, I have the GX error when trying to invoke them.
What appends ? Is it a iAS process which is unable ?
Please help !
Paul-EmileI think you have not put the xml files in the war file.
You need to put them under WEB-INF/ directory. Manually generate the guids using kguidgen script and try to deploy the war module. It should work fine. If it doesnot work please send me the file. So that I can further investigate and find out where exactly the problem is.Other wise you can use the deploytool.
Please let me know if this works fine.
Thanks for visiting our web forum. -
All, Im stumped. In fact I have been on the phone with Apple Support and this has been escalated to the top engineers, as I think its got them too..
Anyway, here is my problem..
I'm running an Mac Mini with OS X 10.7.4 Server. I have had mail running on it for 2 months or so, without any issues. The mail was actually migrated from 10.6 in March, and It actually went smoothly. I have 3 domains which all recieve mail and they all work (or did up until 2 weeks ago)..
So the story is this.. I can send mail from my domains, without issue. imap and dovecot must be working.. cause all the stored mail, can be read with the mail IMAP client.. I can even transfer mail messages from one mailbox to another with Mail client. Sending mail is a breeze, it still works and the recipients still recieve their mail. But I noticed I wasnt getting any mail at all from those mailboxes... no mail, no spam, nothing.. which is unusal. I fired up Server admin and checked out the SMTP log, and this is what it showed for every email recieved: (xxxxxx is just me hiding sensitive info)
Jul 21 14:25:20 xxxxxxxx postfix/postscreen[65857]: CONNECT from [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/postscreen[65857]: PASS OLD [17.158.233.225]:41909
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: connect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Jul 21 14:25:26 xxxxxxxx postfix/smtpd[65858]: warning: restriction `reject_invalid_helo_hostname' after `permit' is ignored
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:27 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: connect to private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: warning: problem talking to server private/policy: Connection refused
Jul 21 14:25:28 xxxxxxxx postfix/smtpd[65858]: NOQUEUE: reject: RCPT from nk11p03mm-asmtp994.mac.com[17.158.233.225]: 451 4.3.5 Server configuration problem; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<nk11p99mm-asmtpout004.mac.com>
Jul 21 14:25:28 azathoth postfix/smtpd[65858]: disconnect from nk11p03mm-asmtp994.mac.com[17.158.233.225]
Ok, now what is odd, is these rejected messages are not even appearing in the mail queue in Server Admin. I have no idea why there are not being delivered
Ive checked my postfix main.cf file and master.cf files they both look ok.. Ive even replaced them with the main.cf.defualt.10.7 and master.cf.default.10.7 files and to no avail... same problem..
So in summary
I can send mail out
IMAP is working on the client end (thus dovecot is) exsisting stored emails can be accessed, read, moved unread etc..
mail is coming into the sever, but its being rejected. there is NO rejection email sent back to the sender.
mail is recieved by postfix, but cyrus isnt doing anything with it.. I have no idea where it goes...
Could anyone shed light on this...
my main.cf file:
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
azathoth:postfix root#
azathoth:postfix root# less main.cf
azathoth:postfix root# more main.cf
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
# soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint. -
Remote Desktop 'Connection Refused'
Modem/Router Model: GT704-WG-B
Firmware Version: 30.17.0 (Red background)
Operating System: Windows 7 Enterprise
Here is what I have set up to allow me access from outside my network via RDP.
Router config: Security > Applications "RDP" Rule Applied | Port 3389 Start/End/Port Map Start
UPnP is on
Modem/Router Firewall is OFF
Windows Firewall is ON with TCP 3389 allowed In/Out
Local PC has static IP address outside of DHCP range
Remote desktop (any version of RDP) allowed in Computer > Properties > Remote
I use Jaadu RDP iPhone application and have used it successfully for quite some time. When I first got Verizon service I set up RDP on the router and everything worked fine. I ran into an issue that caused a verizon tech to tell me to reset my modem/router to the factory defaults. Ever since, I have not been able to access my local PC via RDP. Every time I attempt to connect I get a connection refused message. I receive the same type of message when attempting to RDP in from another PC. I am able to RDP from within my LAN from both my iPhone and my other PC.
I have crossed my Ts and dotted my Is and am at a loss at this point. If anyone has experienced this issue and found a fix, I would appreciate some help.
Thanks#1 If the router turn off UPnP, since you will not be needing it.
#2 If that does not resolve it / or it happen again, please post...
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Hi,
i am using NetBeans IDE 5.,5 and trying out the NewsApp tutorial for Entity beans.
When i run the project I get the following error,
How shall i fix this,
Thanks in advance.
deployment started : 0%
Deploying application in domain failed;
Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: java.net.ConnectException : Error opening socket to server localhost on port 1527 with message : Connection refused: no further informationError Code: 0
E:\Sitaraman\OSS1\Projects\NewsApp\nbproject\build-impl.xml:183: Deployment error:
The module has not been deployed.
See the server log for details.
BUILD FAILED (total time: 13 seconds)Hi,
I had not started the database server. Going to tools->start db server fixed the problem.
Sitaraman -
Connection refused While Calling a Web Service from WebDynpro Application.
Hi all,
I've created a Webdynpro application by importing a WSDL file which is created from a
Web Service from XI.
While I run this Application, and while it tries to connect to XI, I am getting following
error.
<b>Service call exception; nested exception is: java.net.ConnectException: Connection refused</b>
Can Someone please help me out on this issue?
Thanks in advance,
Tejas.Hi,
In my WebDynpro Application which is created by Importing a WSDL file from XI Web
Service is giving error : <b>Service call exception; nested exception is: java.net.ConnectException: Connection </b>
In NWDS-> Windows Menu-> Preferances -> Wrokbench -> Proxy Settings
Use Proxy Settings is <b>Checked</b>.
My Settings in Model's Logical Port is
<b>Use HTTP Port</b> is <b>Checked</b>.
In Securities-> <b>Authentication</b> is set to '<b>None</b>'
With this While I Execute the Application and when it tries to connect to XI..it throws
an error :
Service call exception; nested exception is: java.net.ConnectException: Connection
refused
Kindly help me on this issue.
Thanks in advance,
Tejas. -
Calling a WebServices From Java Stored Proc fails with Connection refused
I have followed the example in Note:220662.1 on Metalink step by step.
I am using two windows machines (2000 SP4). I have Oracle 9.2.0.5 EE on one of them and OC4J 9.0.4 standalone on the other(running on JVM 1.4.2_05-b04). The 2 servers "see" each other over the network.
I can execute the stub from the database machine:
C:\WebServices\HelloWorld>java HelloWorldImplWSStub
Hello World - The current time is Sat Aug 21 11:56:20 EDT 2004When running it from the database, I get:
SQL> select ws_hello_world from dual;
select ws_hello_world from dual
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: [SOAPException:
faultCode=SOAP-ENV:IOException; msg=Connection refused;
targetException=java.net.ConnectException: Connection refused]
Elapsed: 00:00:21.02The trace file generated on the database server machine looks like:
[SOAPException: faultCode=SOAP-ENV:IOException; msg=Connection refused; targetException=java.net.ConnectException: Connection refused]
at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:765)
at org.apache.soap.rpc.Call.invoke(Call.java:261)
at HelloWorldImplWSStub.sayHelloWorld(HelloWorldImplWSStub.java:52)Here is the stub code generated using JDeveloper 9.0.5.1:
import oracle.soap.transport.http.OracleSOAPHTTPConnection;
import org.apache.soap.encoding.SOAPMappingRegistry;
import java.net.URL;
import org.apache.soap.rpc.Call;
import org.apache.soap.Constants;
import java.util.Vector;
import org.apache.soap.rpc.Response;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.Fault;
import org.apache.soap.SOAPException;
import java.util.Properties;
public class HelloWorldImplWSStub {
public HelloWorldImplWSStub() {
m_httpConnection = new OracleSOAPHTTPConnection();
m_smr = new SOAPMappingRegistry();
public static String endpoint = "http://oc4jsrv:8888/MyWorkarea-OC4J-context-root/HelloWorldImplWS";
public String getEndpoint() {
return _endpoint;
public void setEndpoint(String endpoint) {
_endpoint = endpoint;
private static OracleSOAPHTTPConnection m_httpConnection = null;
private static SOAPMappingRegistry m_smr = null;
public static String sayHelloWorld() throws Exception {
String returnVal = null;
URL endpointURL = new URL(_endpoint);
Call call = new Call();
call.setSOAPTransport(m_httpConnection);
call.setTargetObjectURI("HelloWorldImplWS");
call.setMethodName("sayHelloWorld");
call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
Vector params = new Vector();
call.setParams(params);
call.setSOAPMappingRegistry(m_smr);
Response response = call.invoke(endpointURL, "");
if (!response.generatedFault()) {
Parameter result = response.getReturnValue();
returnVal = (String)result.getValue();
else {
Fault fault = response.getFault();
throw new SOAPException(fault.getFaultCode(), fault.getFaultString());
return returnVal;
public void setMaintainSession(boolean maintainSession) {
m_httpConnection.setMaintainSession(maintainSession);
public boolean getMaintainSession() {
return m_httpConnection.getMaintainSession();
public void setTransportProperties(Properties props) {
m_httpConnection.setProperties(props);
public Properties getTransportProperties() {
return m_httpConnection.getProperties();
public static void main(String[] argv) throws Exception {
HelloWorldImplWSStub hstub = new HelloWorldImplWSStub();
System.out.println(hstub.sayHelloWorld());
}The PL/SQL function code:
CREATE OR REPLACE FUNCTION ws_hello_world RETURN VARCHAR2
AS LANGUAGE JAVA
NAME 'HelloWorldImplWSStub.sayHelloWorld() return java.lang.String';Any help would be greatly appreciated.Hello,I have the same problem. Did you find any solution to it?
Thanks. Diego (Argentina) -
Connection Refused while invoking Web Service from BPEL process
Hie
I am getting the following error when I try to invoke a web service (created in JDeveloper) from a BPEL process.
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>Server.userException</code>
</part>
<part name="summary">
<summary>when invoking endpointAddress '.......................', java.net.ConnectException: Connection refused: connect</summary>
</part>
<part name="detail">
<detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: java.net.ConnectException: Connection refused: connect faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection refused:
Did anyone come across a similar problem...??? Plz help:(Hi everybody,
I have the same problem. I developed a sample bpel process and tried to access it form another one, but still having the same exception :
<remoteFault>
<part name="code" >
<code>Server.userException</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'http://set.by.caller', java.net.UnknownHostException: set.by.caller</summary>
</part>
<part name="detail" >.......
Thanks for your help!
miroo -
Web Services/BPEL - Connection Refused Error
I am getting the following error while invoking this web service (in JDev 10.1.2) from Oracle BPEL console...
faultSubcode: faultString: java.net.ConnectException: Connection refused: ..............
Did anyone face the same error...pleaseeee help!!!where is your web service deployed?
-
Connection Refused Error while running AS ABAP Initial Load
All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun
Maybe you are looking for
-
Hi, We have a HP LaserJet 3390 connected through network and shared by 1 PC (Win Vista), 1 PC (Win 7), and 1 laptop (Win 7). It printed fine, but suddenly did not work anymore. The printer showed "offline", and we could not find the printer in the ne
-
Hi, could somebody please send me a JAR file containing the IURLGeneratorServiceClass or or even better everything under com.sapportals.wcm.* to [email protected] Best Regards
-
I was trying to sync my latest photos from iphone onto iphoto but pressed "restore" instead of "sync". Now it's erased my latest photos taken on my iphone a week ago and erased music saved in itunes library. Is there a way to find these photos and mu
-
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
-
Bad Font-Measuring Performance under Windows 8.1
Why does the following little loop (in c#) perform so bad using current version of WPF (.NET 4.5.2) if i change the font-family from "Segoe UI" to "Arial" (or something else...tried "Times New Roman" and "Courier New" - Same problem)? var tb = new Te