RenderPDFForm with formdata specifying button attributes

I have a short-lived process that renders a PDF form using form (in PDF format) and formdata (XML). I created the formdata sample file using another process that uses formDataIntegration-->ExportData service. This process does not create skeleton nodes for button fields that are in the form. I have several buttons in my form and I want to control their visibility, position and URL values using input XML.
How do I create the input XML with button fields (nodes) ? I tried to specify button properties by looking at the form design in the designer. But RenderPDFForm does not seem to be liking it. I am able to populate other text fields in the PDF.
Thanks,
Jyothi

I don't think you can just set properties in the xml data that will be directly applied to a button in the form, or add the button in the xml data. I think you will have to put the UI controlling info in the xml data which will be merged into the PDF in your render step, and have some code in the form load event that uses the UI info to manage your buttons. The buttons should likely all be configured invisible in the form so you don't get screen flashing on startup.
Maybe others with more Form scripting experience can add more.

Similar Messages

How to get all partner guids with a specific marketing attribute value?

Hello,
is there a method or function module in Standard which i could use in my own coding to get all partners (guids or number) with a specifiic marketing attribute and a specific value of this attribute?
Thank you
Best regards
Manfred

Hi,
Use the FM: CRM_MKTBP_READ_BP_SEL_ATTR
pass the input parameter in IS_CHARVALUE in the field SEL_ATTR as the attribute name.
Output will be displayed in the table ET_PARTNER_VALUES as partner guid's
Regards,
PP

Configuring Cisco ISE for Authorization with External Radius Server attribute

Hi,
I'm trying to integrate an external radius server with Cisco ISE.
I created an External Identity Store>Radius Token Server.
I created a Identity Store sequence with just one identity store just as creadted above.
And I was able to authenticate successfully.
But when it comes to authorization.
I observed we just have one tab named Authorization while creating Radius Token server.
And it always refers to ACS:attribute_name.
If I want to define a IETF radius attribute, (lets say class with attribute id as 25), how could I do it.
In Cisco ACS we have a direct entry option in authorization tab where we can define the radius (IETF) attribute within Radius token server creation (within radius token server>Directory attribute tab).
How ever I try to define the IETF attribute here (class,IETF:Class) I am not able to authorize with this attribute value.
I tried with just one single authorization rule where it could hit.But observed it to go the default(as none of the rules defined matches the condition).
Can anyone guide me how can we define a IETF radius attribute for authorization within Cisco ISE and what policy could we set it to work as authorization.
Thanks in advance
Senthil K

This is the step of Creating and Editing RADIUS Vendors
To create and edit a RADIUS vendor, complete the following steps:
Step 1 From the Administration mega menu, choose Resources > RADIUS Vendors.
The RADIUS Vendors page appears with a list of RADIUS vendors that ISE supports.
Step 2 Click Create to create a new RADIUS vendor or click the radio button next to the RADIUS vendor that
you want to edit and click Edit.
Step 3 Enter the following information:
• Name—(Required) Name of the RADIUS vendor.
• Description—An optional description for the vendor.
• Vendor ID—(Required) The Internet Assigned Numbers Authority (IANA)-approved ID for the
vendor.
• Vendor Attribute Type Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute type. Valid values are 1, 2, and 4. The default value is 1.
• Vendor Attribute Size Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute length. Valid values are 0 and 1. The default value is 1.
Step 4 Click Submit to save the RADIUS vendor.

Cannot create or replace : The specified extended attribute name was invalid.

New problem arrived today. Trying to copy a file from 10.6 server with an XP (SP3) client. I get this error:
Cannot create or replace (file name here): The specified extended attribute name was invalid.
The contents of the file can be copied, but not the folder. Other files can be copied. There are no funny characters. The name is not too long. I propogated the permissions on the share and that had no affect. The problem exists on three different XP systems. Can't find extended properties that could be causeing a problem. Any ideas?

Nikon just released a Firmware update today for the D750

Help with creating highlighted buttons in DVDSP 3

OK, I'm going nuts. I set up a "template" in iDVD using the "Brushed Metal Two" form. It has "arrow buttons" that "highlight" when selected in whatever color I set. They're a shadowed grey metal, like the background, when not selected.
When I open this "template" in DVD Studio Pro 3.0, they arrows show up, but they lose their highlighting ability. I've tinkered with the settings in DVDSP, Button attributes, and have no even gone so far as to try designing my own buttons in Photoshop. Nothing is working. re: Photoshop, I don't know the program very well. Layers and all that is basically another language to me.
In the end, I don't understand why everything I do in iDVD gets imported into DVDSP EXCEPT for the highlight fuction for the buttons. The "button" shows up, but it loses the ability to be highlighted.
Anyone have any thoughts?
Chip Tredo - Dallas

iDVD templates will not import properly into DVD SP depending on the version of iDVD, DVD SP 3 will be further back than this
http://discussions.apple.com/thread.jspa?messageID=4650585&#4650585
DVD SP 4 can do iDVD before iDVD 5, do not recall the ones for DVD SP 3
If you go to the menus section here
http://dvdstepbystep.com/
There is some info on making buttons including using Photoshop look at
http://dvdstepbystep.com/qm.php
http://dvdstepbystep.com/newmap.php
http://dvdstepbystep.com/motion.php
http://dvdstepbystep.com/useelements.php (using elements from DVD SP, you can also access iDVD elements the same way)
http://dvdstepbystep.com/buttons07.php
http://dvdstepbystep.com/buttons07m.php

Read a structure with out specifying its field/component names-Dynamically?

Hello
My requirements:
I need to write a module pool prog., which updates a Z_material_master_data_table, which tables has 150 fields (i knew its odd having 150 fields in a master table).
On the module pool prog. i need to place the fileds in 2 columns, say left column(for current data) with 150 fields and right column(user input data for updating the Z_material_master_data_table) with 150 fields
When user opens the prog., user will be presented with a initial screen, where in user enters the material number (for which user want a updation ) then, the user will redirected to 2nd screen where in my prog. will default/prepopulate the left side fields with the current(old) data. Now user has to input his/her data (new) for updating any field of the z_master_data_table.
And after finishing the user clicks a push button with title of 'UPDATE'
Now, my prog. has update the entry in the z_material_master_data_table. The 2nd screen looks like below,
_Currnet data_ -------------------------------------- _New data_
Current Material description ---------------------- New Material description
The field will placed here ------------------------ The field will placed here to
for showing the current data                              inputting the new data by user
As there are 150 fields, i would not like to write validation (cross checking whether user entered the data on each field) on every field of 150 in number.
The 2nd reason, they want the prog. a kind of dynamic in nature, like going further, if the business want to add a new field, say 151_field to the the table, they dont want to change the prog. (just keeping the 151_field should enough) to address this newely added field.
By thinking field symbols approach, i created 2 structures for old data and another for new data. These structurer are replicas of z_material_master_data_table, but 2nd (new) structure field names posses a an extra 4 chararctes like '_UPD', say for example, ZZMAKTX will be the fileld name in structure_1 (old) and its name will be ZZMAKTX_UPD in 2nd structure(new)
Pls. give me some code snippet for (my above requiremnet) reading a structure DYNAMICALLY with out specifying/mentioning the field names for each and every field or give me any better idea to meet my requirement
Thank you

From my understanding, your requirement was creating the Program to display the 150 fields of the custom Z-Table based on the material number.
Once the user enters the Material number and click enter. It has to navigate to another screen with old data in one column and second column for the new data, Update button for saving the new data to backend Z-Table.
Back end 150 fields will be changed based on the user requirement, So you need to implement it as dynamically.
Solution:
data : it_tabdescr type abap_compdescr_tab.
data : ref_table_descr type ref to cl_abap_structdescr.
DATA : cl_struct TYPE REF TO cl_abap_structdescr.
data: p_table(30) type C. value u2018Custom Z-table Nameu2019.
Return structure of the table.
ref_table_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_tabdescr[] = ref_table_descr->components[].
cl_struct ?= cl_abap_structdescr=>create( it_tabdescr ).
CREATE DATA dyn_line TYPE HANDLE cl_struct.
assign dyn_line->* to <fs_wa>.                                u201C<fs_wa> have the same structure of the Z-table
CREATE DATA dyn_line1 TYPE HANDLE cl_struct.
assign dyn_line->* to <fs_wa_update>.               u201C<fs_wa_ update> have the same structure of the Z-table
Best Regards,
Manigandan D
Edited by: Manigandan Damodharan on Feb 4, 2012 8:58 PM

How do I create multiple TEBs with one submit button on one page in Captivate 7

I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
I am creating test questions.
Each test question has multiple text entry boxes (for numbers only).
Student should be able to enter numbers into the textboxes in any order.
Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS. But that is not my question at this time.)
I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.
Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
Any help or direction to help is appreciated!!

I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.

Terrance Devlin answered a question about iPhoto (4-2012) re:copying iPhoto Library to an ExHD, and losing all the albums. I can't locate the "Choose Library" when I open iPhoto with the opt button. Can anyone help?

I tried to move my images (over 25,000) to an External Hard drive to open up some memory, hoping to make my computer run faster. It took three hours to move the images and I see them all in the mac's menus. However when I try to open them with iPhoto now, none appeared. and when I tried to import them back to the main HD they come in to iPhoto just fine, but not with the albums nor any of the massive organization i'd created in the original. this represents years of images, and I can't imagine that I'd have to recopy them into folders/albums again.
Terrance Devlin answered a similar question back in April of last year. He said to make sure the ExHD is formatted to MAC OS Extended (Journaled) and to move the library to the ExHD and then open iPhoto with the option button and select "Choose Library" from the resulting menu.
Command "I" tells me that the new drive is formatted correctly. I can't locate the "Choose Library" when I open iPhoto with the opt button.
First, I wondered if the application needs to be on the same drive as the Library. I sure would like to know if I can find out how to restore all the folders I had them in. Terrance's advice helped the user that had asked the question.
Here's the url for that archived discussion: https://discussions.apple.com/thread/3849933?start=0&tstart=0
Can anyone help? I'm using iPhoto 5. My MAC is an OS X version 10.4.11.
thanks, brokenlom

Here are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Tried purchasing iTunes music. Put in my apple id and password then i was directed to a 'Terms and Conditions' page. I checked the box then clicked the 'accept' button next page read 'your Session has timed out ' try again with a Done button to click on

Tried purchasing music from the iTunes Store. When the window popped up I put in my apple id and password. Then I was directed to a 'Terms and Conditions' page. I checked the box next to the 'Yes I agree to these terms and conditions' - then clicked the 'accept' button next page read 'Your Session has timed out. Try again.' with a 'Done' button to click on. Oh the same thing happens when i try to download free iTunes. Yes I have tried & tried it again I even logged off and singed back in-- no joy
After accessing my iTunes account I was not able to change anything like my credit card number when I tried and was sent right to the 'Your session has timed out. Try again.'
The last time I purchased any anything was on September 25th 2011 and the 'terms & conditions' page was last updated on October 12, 2011
Does anyone have an idea to what is going on with my iTunes version 9.2.1 (5) and I can not upgrade to a higher version my iMac does not have the intel processor chip.Thank you for your time and help with this matter. You are greatly appreciated

I am having the same problem also! I posted on here about it, but no one has responded with ideas. I called technical support and e-mailed them, the only suggestions they gave was for the to turn off my firewall. But I didn't change anything, so it shouldn't suddenly stop working. Maybe this is just an iTunes issue? But it doesn't even recognize my account anymore, and I cannot log in now.
If you happen to get an answer, will you please let me know what works for you?
Thanks!

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from M, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from M, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

Is there a way to stop all loops( While and For )at once or close the big application with just a button?

How to sop all loops in the application (While, For and subvis ) with a single button? Use the event sturucture?

Yes, if you just need to kill the running application, you can use an event structure in a parallel loop. (See attached code image). Pressing the stop button stops everything! :-)
(Alternatively, you could even call "quit labview".)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Killall.png ‏6 KB

I tried to soft reset my ipod touch with the top button and the screen button. it turned off and went to the blue screen with the apple. now it won't do anything-it has stayed on that scren for 4 hours now. does anyone know how i can fix this?

i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks

See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

RenderPDFForm with formdata specifying button attributes

Similar Messages

Maybe you are looking for